I'm trying to slim some of my dress shirts to a better fit, and i've gotten a great shape with pins, but i'm getting a weird bulb of material on the chest area like a ( ) between the two buttons. i've tried loosening up some fabric but it's not working. it seems to happen when i pin the armpit smaller
Issue here is that women's clothes require darts and wedges to fit over the bust properly. That shirt likely fit well enough before you tightened it up. If you read up on bodice pattern making, or check out a fitted women's blouse, you'll see what I'm talking about.
Your options are to either add stretch panels to side or back (shirring, elastic panel, etc) or to add fabric... Comment too long. Click here to view the full text.
I'm moving to a new apartment, and in my new building, each apartment has its own corresponding "basement" which is basically a single room w/ door found in the underground hallway, accessible by the stairwell. Most people use these for storage but I've noticed mine is fully equipped with electrical outlets and heaters. It's big enough to set up some sort of office or vidya center (inb4 cuckshed) but I'm not sure how I'll get my wifi down there.
I've seen these wifi repeaters... Comment too long. Click here to view the full text.
>>920365 Just like property management won't let me set up a repeater in the common areas, they certainly won't let me run cable from my front door, down the stairwell, through the basement hallway and into my basement unit.
Can anyone give me a absolute beginners guide to hacking? Like if someone who never touched a computer aproached you and ask you to teach them in the art. I'm not looking for illegal activities, i'm curious about becoming a spec ops, or intelligence agent.
Hey guys, i want to have a lottle 4 usb charger thing flush mounted somewhere in my dash. I hate cigarette sockets ones as they are absurdly unreliable and slow charging and look like shit so i want to hardwire in something like pic related, except with just 4 usb slots and 1 on off switch which is for all of them. How would i go aboit wiring something like this up, anyone got any wiring diagrams or good ideas? The main criteria is all 4 have to be able to charge at maximum speed and be able to charge any device. Thanks guys
>>924433 Run a heavy guage wire from the battery to where you need power. Splice in a fuseable link closer to the battery. Then split into 4 smaller wires right before your charger thingy. That's all I got.
Alright metal workers, all of you know what a pain in the ass it is to remove one of these from a rusted auger shaft. It could fall right off in less than 5 minutes or you could fight it for hours on end. What is the most effective ways to remove a house bearing from a shaft? I've been tinkering with an idea of using flat bar with slots to insert chains, chains, hydraulic pump, and a plate to insert chains. The flat bar will slide behind the bearing when possible, the chains will be attached to both the flat bar and the plate,and the pump will be positioned between the... Comment too long. Click here to view the full text.
>>923980 >>923980 Spray with wd40, wait a little while. Warm up the casting with a propane tourch pretty good than focus the heat on the bearing, once the bearing is nice and hot, tap the 4 corners of the casting with a hammer. Basically a hot bearing/housing vs cold shaft will equal success.
V8s are relics. I love V8 engines but they have no place in the modern world. You can do as much or more with inline 4 cylinder engines with a fraction of the capacity of conventional naturally aspirated V8s.
>>923448 Don't customize your anvils. It will only decrease their value. What you need to do is find people who know their shit (aka blacksmiths. you know, poeple that actually use anvils) and sell to them.
Anvils are designed certain ways for certain reasons. They are tools, not collectibles. If you try to sell a customized one to someone who knows their shit, they will just laugh and walk away.
Unless your anvils are cheap cast iron capped shit that noone wants anyway. Then do wtf you want, they aren't... Comment too long. Click here to view the full text.
sup /diy/. milfag here, ive been planning on getting out at the end of my contract but dont know for sure what i want to do when i grow up. ive been thinking about doing something like electrician, because electricity and electronics are hobbies of mine, and id rather do 1-2 years of trade school instead of 4+ years of college. i cant stand being in regular school so im pretty sure i wont do well, and im more of a hands on guy anyway. any electricians care to chime in on how they like/dislike it? if the are happy with their career choice or not? tips, tricks, or anything... Comment too long. Click here to view the full text.
There are a lots of different kinds of electricians jobs. You can work in a factory repairing and replacing stuff. Working in construction can be physically hard but can pay well if you are in the union in the USA. Had a high school friend who worked for GE and traveled all over the world working on generators on dams. After working as an electrician for a few years I decided to do sound and video which is a low voltage electricain. The work has been interesting but I probably would have made more money being a union construction electricain. For me work needs to be interesting... Comment too long. Click here to view the full text.
As a "budget" anvil I see nothing wrong with it. Having said that, you're going to get a lot of feedback as contact is made due to the beam not being solid. For instance, when you are working your material on one side of the flange causing vibration in the web.
Yes an I Beam would be better as it is formed steel. You want the web of the material to be as thick as possible or as you can afford. The Web width would need to be small as possible. That gives you less deflection when striking.
What's a good insulating foam to use for a cat shelter like this? Basically, I want to fill all the areas between boxes where I don't have sufficient whatchamacallit insulation so boxes don't move around.
Someone told me some of that insulation melts plastic. Sounds like bs, but confirm. I also don't want the cats breathing any hazardous fumes.
>>924314 Shelter for what? Stray cats? You're trying to over engineer this thing.
The vast majority of animals are more than capable of keeping themselves plenty warm on their own in cold air. What gets animals in the end is moisture which inhibits their coat's insulating qualities, or drafts strong enough to leach the warm air trapped by their coat.
A single wall box with a protected entrance to keep drafts at bay and a vent hole near the top to let warm moist air leak out is all animals need.
Straw... Comment too long. Click here to view the full text.
A family member got me this for the holiday, /diy/. I have my gallon of shitty beer fermenting in my closet, but I'm not particularly a beer drinker. I see how all of the parts are reuseable (Probably to sell more of their beer making refills)but I was thinking something a bit different.
What else would I need to convert this into a still for gin?
>>922923 Brewing and distilling are two totally separate things that take totally different equipment, and distilling at home isn't recommended for two reasons: One, if you fuck up you can blow your house off it's foundation, and two, if you do it wrong you can literally poison yourself to death.
Hello /diy/ I woke up the other day to see that 2 rows of tile on my kitchen floor have buckled and are raised up now. Two rows of 5 tiles and partial tiles against the dishwasher. Two full tiles and one partial have cracked as seen in pic related.
Is there a way I can just remove and replace the cracked ones and get the others to lay flat again? There is some shit on youtube about drilling holes in the grout and spraying some glue shit under the tiles but I don't know how I'd force them back flat on the floor again.
All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.
This is a 4chan archive - all of the content originated from them. If you need IP information for a Poster - you need to contact them. This website shows only archived content.
If a post contains personal/copyrighted/illegal content you can contact me at firstname.lastname@example.org with that post and thread number and it will be removed as soon as possible.