Archived threads in /k/ - Weapons - 163. page
- Home
- Board: /k/ - Weapons
- Reading: Archived threads in /k/ - Weapons - 163. page
http://www.israelvideonetwork.com/if-this-is-real-israeli-war-tech-then-this-is-a-huge-game-changer/
The Jews have invented cartoon weapon technology...
>>30449132
the website gave my phone cancer, what the fuck is it.
https://www.youtube.com/watch?v=LG-_Dz6nseQ
>>30449132
what about it is like a cartoon
Been wanting to get into rifles. Only have handguns and a shotgun right now. What is the best rifle I can get for around $500?
I've been looking into the mini 14 but they're all going for almost $800 on gunbroker. Is it worth it? I'd like to buy new for what it's worth. $500 is my ceiling because I found an idiot willing to pay that much for my shotgun.
>>30449090
Found an idiot willing to pay 800 for my mini 14.
>>30449090
>What is the best rifle I can get for around $500?
Just save up another $500 and get yourself a decent AR + some ammo
You're not going to get anything you'll like for $500.
Id go with a mini only if you have to have the "traditional" rifle.
But for 500 sheckles, you could get a rugger 556 or an m&p15 and have a better jumping point for getting into rifles
Hey guys, I've got a problem. A while back I bought a norinco sks at a pawn shop for $265, but stripper clips won't function properly with it. When I attempt to load the magazine with one, the clip itself goes down into the magazine with the rounds still on it and gets stuck in the guide slot. Is this issue fixable? would I have to take it to a gunsmith?
thanks fellas
>>30448894
>Hey guys, I've got a problem
You sure do.
>I bought a norinco
There it is.
>>30448894
Norinco export or Type 56?
>>30448894
What stripper clips are you using?
What normally stops the clip from going down into the magazine are the little dimples on the sides.
Either you've got defective clips or your stripper clip guide is too wide.
What round is this? Found it in an old sewing box
>>30448829
They used those to sew tanks together.
>>30448829
30-06
30 grain bullet with 6 grams of powder
Hey'a /k/, I'm looking for a new bolt-gun in .223 or 5.56. Long story short, I'm not a fan of AR's (I'm in New Jersey and we have to get compliance work, yes, before you say so, I am going to move out ASAP). I like bolt-action rifles, and I need a new bolt-action rifle that doesn't have very much kick in an affordable, intermediate caliber. I already own a Finnish Mosin M39, and I love it, but it's not a gun that many new shooters like and the .22LR rifle gets boring after a while. I take people shooting and teach them marksmanship as a casual hobby, and I'd like to give them something more fun to use at the outdoor range.
So far I've been looking at the Mossberg MVP Patrol as the best option since it has the added bonus of iron sights, but from what I hear, it's not exactly built to last. The fact that it takes AR magazines has supposedly led to inconsistency from manufacturer to manufacturer with feeding in a bolt gun. This neat article talks about the issues with economy bolt-action rifles.
http://www.chuckhawks.com/compared_bolt_action_economy_rifles.htm
What do you folks recommend? I was considering the CZ 527 in .223. I'd like something that's of decent quality, my budget's flexible (I can spend $300-$700 on the gun itself) but not too high, unless you point out something really excellent. Thank you!
>>30448710
The CZ would work superbly, maybe consider a ruger gunsite scout in 5.56
>>30448734
Thanks mate. They're getting harder and harder to find, though. Anybody have any other suggestions? I'd like to buy the rifle now, but I won't be back home from an out-of-state internship until mid-August, meaning I'll probably order it a bit before then.
>>30448710
How about a Troy PAR?
I've never had much time with a bolt action rifle, so I have some questions.
When locking and unlocking the bolt, there seem to be two parts- one, where the bolt seems loose, then it seems to get really tight before it completely locks up. So what causes the two stages? Is it just the locking lugs engaging? Or is there some other mechanism at work?
Pic related is a Howa action, which is what I've played around with. Maybe it doesn't really happen with other actions?
>Is it just the locking lugs engaging?
Yes
I believe there is a lead in angle to tighten it, as opposed to an ar15 where the bolt goes straight in and then rotates; the two motions being separated (on the ar15)
Tighten may not be the correct term, but it pulls the bolt to the correct (predefined) headspacing
>>30448727
Yes.
It's kinda like a Mauser or Mosin action.
You ram it home and then lower the bolt, and it travels forward a little bit more when you lower it.
This it the locking lugs engaging/tightening.
Looking into buying my first handgun. Think i've narrowed it down but not sure. I've only shot the XD but in .45 caliber.
Which one of these is the best? Which one is the smallest? I know the Shield is the cheapest but are there any tradeoffs?
Also are there any other concealed handguns in this "tier"? I know there is the G26 which is thicker and double-stack.
I heard g43 sucks and that the Kel-Tec pf9 is hit or miss.
What about .380s?
>>30448678
The Shield's only problem is the trigger. If you can get over that, it is a perfect cc gun.
Shield, PPS m2 and G43 are the best options as far as single stack 9s
>>30448678
I don't like the XD's safe.
Just got a new Case trapper.
I've been carrying tactical folders for quite a while, trying to go more traditional.
>>30448659
Same wallet, same holster, almost same pen. Teh fuq m8?
>>30448701
Great minds think alike?
You sound like a scholar and a gentleman.
O shit waddup
Don't fuck around!
>>30448613
link?
>cricket
WE WUZ KALISHNAKOVZ.
Are any AKs currently being imported besides NPAPs, 5.45 Arsenals, and Veprs?
If not, what's the best parts-kit gun.
On an unrelated note, if I move to a new state, do I need a new driver's license before I can buy guns?
>>30448409
To the driver's license thing, yes, you do
>>30448448
thanks for the input. Do you know anything about AKs?
>>30448409
Classic Firearms AMD series.
How do you weaponize a ceiling fan?
>>30448104
sharpen it
Attach downward-positioned flamethrowers.
Chainsaws instead of blades
I recently bought a P320 Carry in MD. The magazine capacity in MD for a pistol is 10 rounds. The store worker said its possible to remove the magazine block as long as its done out of state.
Does /k/ know how to remove unblock a SIG magazine?
>>30448038
What is google?
What is youtube?
Why is OP a fag?
>>30448296
Couldnt find anything on google or youtube,
is my google-fu weak?
>>30448038
It's not legal for you to bring that mag back into MD once you remove the block. It's not even legal for you to possess.
To remove it, you need to take the magazine apart. Are you too dense to be able to do that?
Can /k/ tell me how much this is worth its a Stevens single shot 20ga is all I know kind of beat up this guy is trying to sell me it for $125 whats it worth???
Heres some more photos
Last photo I have of it.
/k/ your my only hope
>OI BRUV, GIMME YOUR MOBILE AND WALLET OR I'LL SHANK YOU UP
>>30447723
this is now a machine gun thread
Do they really call it a mobile?
Oh.....ok... Here you go...
![maxresdefault[1].jpg](https://i.imgur.com/7OLzM1p.jpg "maxresdefault[1]")
