Archived threads in /k/ - Weapons - 1087. page
- Home
- Board: /k/ - Weapons
- Reading: Archived threads in /k/ - Weapons - 1087. page
http://youtu.be/DxqL9L-0sN8
RUGER FAGS B T F O
T
F
O
>>28412533
Doesnt really seem bad, nor does it seem any good.
Can't say I'm surprised, I've always loved Ruger for their revolvers but hated their polymer guns.
I dont know why anyone would buy a polymer ruger instead of any of the many other much more established polymer options already on the market.
>>28412533
>glock dingus
what a fucking retard
>>28412533
MAC is stupid but /k/ is more so. You retards shit on him until he makes a video that agrees with your views then his word is gospel. Honestly can't wait and probably getting the 45 acp.
Why aren't we bringing back the Zeppelin for COIN? With 1000 of these things bloating out the sun over Afghanistan with their infinite loiter time, we could've won the middle east already.
Why aren't we bringing back the Welsh Knight for COIN? With 1000 of these things bloating out the sun over Afghanistan with their infinite loiter time, we could've won the middle east already.
>>28412414
helium is getting rarer and rarer
hydrogen isn't getting any less explosive
>>28412414
>What is Revivor?
>What is PGSS?
>What is PGST?
How /k/ is this?
On a scale of one to chocolate cake it's sort of a blue-green
>>28412403
gtfo
>no guns
>a crossdressing faggot
>dykes
Pretty /k/, actually.
Can someone help an absolute beginner on building crossbows out? Thanks in advance :)
>>28412179
What kind of crossbow? How heavy do you want the draw weight?
>>28412179
As far as i heard, a good place to start is building PVC crossbows.
>>28412194
A light one.im mostly interested in the prod though
How exactly did America win against Japan in WW2? the atom bomb aside. Did they just outnumber them? was America better equipped? etc
>>28412172
industrial might of america vs that of japan
>>28412172
http://www.combinedfleet.com/economic.htm
>>28412172
Superior production cspacity, innovation,
And logistics
Anyone here actually enjoy shooting handguns more than rifles?
>>28411936
I enjoy it much more because I am pretty shit with handguns, so there's the exciting prospect of tracking my development.
Yup.
>mfw fired shotgun 15 times and have never held another firearm
I had this fun thought earlier.
This is the Hind of the Star Wars universe. Discuss.
yea it is
>>28411928
probably. anything else?
>>28411928
Actually quite a reasonable thought.
I'm thinking about buying a Colt Police Positive .38 S&W for $350 as an open-carry piece for when I'm dressed nicely. I like old guns and I don't own a Colt, so it appealed to me for those reasons. I might redo the rubber grips with walnut or whatever wood I find with the prettiest grain.
Can I do better for $350-ish delivered?
>pic related is not the exact gun I'm buying, but one from an image search
>>28411715
>using your gun as some faggot accessory piece
>>28411734
Boo hoo
I hope OP triggered the fuck out of you.
Police trade-in S&W Model 10 in .38spcl for ~$300, check J&G Sales
What do you think are the general classes of guns everyone should have? for example here's what what I think:
9mm or .45 semi-auto pistol
.22 lr rifle for training and small game
"fighting" carbine i.e. AK or AR
scoped high power rifle like Remington 700
12 gauge shotgun
>>28411669
glock 17/19, regardless of whether you like them or not
>>28411700
People like you are the reason I don't want a glock
>>28411669
Pretty much covered the bases
only thing I would add is a .357 mag or .44 mag revolver
>>28411729
why? I simply mean if anything were to ever happen, a glock would be the easiest to find parts/spare mags/etc for and it would be wise to be comfortable shooting and working on them
What do you think about Drone Tanks and similar vehicles?
>>28411532
Useless, next generation world war will be fought with Economy and Cyber Hacking. America is already losing both sides to China. Once it goes hot, China will wind up on top.
That is why America tries its best in information warfare by sending paid shills to counter Chinese social warriors.
Seems like they'd be more than suitable for like a semi-static defece or area control. Think of a couple of these hull down or moving with infantry in Ukraine. Seems like it would be pretty suited, actually the more I think about it the more I like these..
They'll be Obama's only option for enforcement of his total gun confiscation once most of the military deserts.
ITT: Mag-lites as weapons.
Anyone used one as a weapon, how effective was it, and did it break? What size would you recommend? Has anyone been hassled by cops for having one?
>>28411480
Back when I was a security guard we weren't allowed to have batons, so I carried one of those.
>be inspecting buses
door open
>defcon Paul blart
>go inside bus and shine flashlight on seats
>*wild homeless appears*
>*wild homeless uses charge*
>*use flashlight to counter*
>it's not very effective
Long story short he went out the emergency exit in the back and took off into the woods with a concussion at least.
So. Much. Paperwork.
>>28411480
why not just have an actual weapon?
>>28411480
6D to the head sounds like it would work just fine unless you're swinging it with your vagina. You know how cops hold it up above their shoulder with their thumb away from the lens? That's the best whack-a-nig stance.
Cops won't give two shits about your flashlight unless it's covered in week old ketchup.
For bonus mall ninja points, get the tacticool accessories like roll stopper and glass breaker.
http://theaviationist.com/2016/01/02/new-russian-fsw-trainer-makes-first-flight/
Is this design better for dogfighting?
Pretty shitty picture, they should have taken something to show off the wing.
>>28411477
Inherent instability really limits it's use. Kinda like an oblique wing. Feasable but not practical.
It's better for dogfighting, worse for literally everything else.
Not really worth it outside of niche applications such as this, really. And even then it's still a bad idea because high maintenance costs for a trainer is a terrible idea.
Hello /k/.
I am 18 years old, live in Commiefornia, and have just bought an 80% AR-15 lower receiver.
I plan on getting a magpul lower parts kit (grip is comphy as fuck), however, for the rest, such as the upper, the stock, and the sights, I don't have the slightest clue to start.
Any recommendations for good quality parts? I'm looking for a 5.56 upper as well.
Pic because Ian is bro-tier gun Jesus.
Depends on your price range and what you want to do with the rifle.
Palmetto is probably your go-to site. Just remember what you pay for is sort-of what you get.
Don't skimp on barrel, BCG, and if/when you want to upgrade the trigger group.
But unless you already have a workbench with table mounted vice, plan to get one, or just not really going to assemble that many AR's, A barreled or complete upper is much easier to get than buying all the parts and tools and putting them together.
Also, even if it's a 80% lower, do remember you live in commiefornia and that if you do stupid retarded things like bragging and telling everyone you meet about this and that, don't be surprised if cops show up, even if you haven't broken any laws.
And regarding our state laws, read up on it. Unless you want to be like some of the "fuck ATF" people on /k/, CA has quite a bit of shit to navigate through. Calguns is a good place to check out their California-centric guides to not getting a felony.
Welcome to the club. Although being a CA gunowner will mean you'll get dipped on a lot on here.
>>28411039
anything BCM
Hey /k/,
What's this thing called?
>>28411022
Abrams Apple
>>28411022
My penis has a similar bump, I use it to evacuate your mother's bore.
>>28411022
isn't that the shoulder thing that goes up?
Picked this up out the back of a guy's SUV. He gave me forewarning that on the handguard, in a speedy attempt to get the cosmoline out of it, he took a heat gun to it, but didn't think to put a towel on it. He thought he had the heat gun far enough from it. In turn, he pulled some of the stain/varnish out of it, and it re-dried on top of it. The whole thing is a different shade now from the rest of it because of it. I don't mind the look of it, but it's like dried powder on top of it. I can scratch it off with my nail if I put enough pressure. Should I just pull all the loose stuff off the top layer, or is there any way to fix it other than stripping it all off and refinishing it?
>>28410979
no. the finish is fucked. strip it off and redo it.
>>28411076
Any ideas on how to match it to the original?
>>28411123
Basically impossible for you to do. The sheen you see is from 70+ years of aging. You can't really simulate that.
![c21[1].jpg](https://i.imgur.com/Yqt4qRg.jpg "c21[1]")
