Is there a PDO patch for Pepakura Designer 3.1.6?
And maybe someone could share hi res 3.1.6?
>>529802
https://mega.nz/#!I1BCRTIR!oOkRDMyOx02xUBMB4QnWOfWIGIZqEM81QPSvE8rkMv8
idk if works but try.
Its for 3.1.5.
I want patch for High Pepakura Resolution Version
0001EC84: 0F95C3 -> 32DB90
00092C7A: 01 -> 00
00094DA0: 894108 -> 909090
Open pepakura3.exe in a hex-editor and go to the offset on the left.
You'll find the bytes before the arrow there, change them to the ones after the arrow.
I'll do a proper update to the patcher when I can get my hands on the latest HR version.
>>529840
ok here is the hd version....I would like the patches for both like you did last time for me
http://www.mediafire.com/download/09t561b48f1jti2/setup_pepakura_h316_en.exe
>>529865
Done. Enjoy:
https://www.mediafire.com/?2yg2y2wuaugagx5
Manual instructions:
Standard:
0001EC84: 0F95C3 -> 32DB90
00092C7A: 01 -> 00
00094DA0: 894108 -> 909090
High Resolution:
0001EEE4: 0F95C3 -> 32DB90
0009386A: 01 -> 00
00095990: 894108 -> 909090
>>529884
Can't save any file.
>>529886
Saving works fine for me, do you get an error message?
>>529888
Not that anon, but I have the same problem.
Pepakura Designer 3 (High Resolution Version)
---------------------------
A registration keycode is required for saving/exporting data.
---------------------------
>>529896
Odd, I'll look into it. In the meanwhile have you tried re-entering your serial?
>>529897
>have you tried re-entering your serial?
Sorry. I don't know why I didn't think of that.
That fixed it.
Thanks, it's working perfectly now.
>>529897
what serial that you used?
>>529884
>https://www.mediafire.com/?2yg2y2wuaugagx5
thanks bud
Version 3.1.7 is out. Patching instructions for standard version:
0001EC94: 0F95C3 -> 32DB90
000932AA: 01 -> 00
000953D0: 894108 -> 909090
Hi-Res version anyone?
>>530876
http://www.mediafire.com/download/3adqbjknkcd228a/setup_pepakura_h317_en.exe
you know I want the auto patch....right....
>>530893
Thank you very much
Here is interesting link for official hires3.14a:
http://www.tamasoft.co.jp/pepakura-en/download/designer_hires/bin/09482/setup_pepakura_h314a_en_st.exe
You even can see this folder here:
http://www.tamasoft.co.jp/pepakura-en/download/designer_hires/bin/
>>530876
I hope I didn't get stiffed here...if I did then your source will be dried up
>>531066
Sorry man, i was busy. Not an original patch maker, so patch is different.
http://rghost.ru/6yx9G2J4S
Click on "cкaчaть" button. on top
>>531125
>http://rghost.ru/6yx9G2J4S
got it... thanks
>>531125
well it didn't work...it still asks for the file password for locked files...that's the patch I need
>>531125
File has malicious!
>>531141
I found an error in high resolution bat-file - you need to change "std" to "hires". But standard version must work. Which file did you run? Try to run "std.bat" as administrator.
>>531170
using the hires one and following what you told me to try did not work either....locked files are still locked and asks for password
>>531177
Looks like you have permission issue.
Here is corrected patch for Hi-Res version. Run "hires,bat" as administrator. If it doesn't work, i put already patched file too.
https://file.io/2frG77
>>531193
>https://file.io/2frG77
gee I'm just striking out here....the link is 404ed
>>531207
Why don't you just manually patch it?
>>531208
don't know how...and don't have the program to do it...
>>531209
The first time I heard about these patches I didn't know how to do it either. But it's really easy.
Also there are dozens of programs that can do it, most of them free and/or open source.
I personally recommend the freeware HxD, but any hex editor will do it, basically.
http://mh-nexus.de/en/hxd/
Just remember to backup your .exe file when starting out and you will be fine even if things go wrong.
>>531235
ok I downloaded and installed the program...opened pepakura hi res in it and I see a lot of scary numbers and letters....can you walk me through on what I need to change....explain it in a way that a 2 year old will understand...lol....also then manual numbers posted is for the standard version....would those work for the hires
>>531270
>also then manual numbers posted is for the standard version
Sorry, I didn't realize that. It won't work.
Do you even care about the standard version? If not, then give me a while and I'll try to figure out the numbers for the hi-res version. If it works I'll post a little tutorial to help you out.
Wish me luck
>>531270
>>531289 here
Hell yeah, I did it.
Stupid numbers, I did manage to fuck up a single byte and it was giving me errors all over, I was about to give up and say we would have to wait for our regular patcher, but I was able to catch my mistake and fixed it.
Manual instructions for 3.1.7 Hi Res:
0001EFE4: 0F95C3 -> 32DB90
00093ECA: 01 -> 00
00095FF0: 894108 -> 909090
I'll do a little tutorial on how to use this on my next post.
>I'm so proud. But all credits go to the original patcher, I merely copied his solution.
Patching mini tutorial
It's actually really simple.
There are 3 instructions. Each instructions has 3 sets of hex numbers. Let's take the first instruction:
0001EFE4: 0F95C3 -> 32DB90
The first number, "0001EFE4" is the offset
The second number "0F95C3" is the original thing you'll find in the program, it's here only as a guide so you know what you'll have to change.
And finally, the last number "32DB90" is what you have to change the previous number into. This is the actual patch.
So, first you make a copy of the pepakura3h.exe to be your backup so you can revert it if you fuck up, and open pepakura3h.exe in HxD (make sure you don't open it as read-only).
Then click Search>Goto... (or hit ctrl+G) and in the dialog that appears you paste the offset (which is 0001EFE4 for the first instruction) and click OK.
The program will scroll down to the specified place and the cursor will be on the first byte (couple of numbers) of the original numbers (in this case it should be on 0F, and you will see 95 C3 right next to it)
Then you simply change those numbers to the ones in the instructions so:
0F will became 32
95 will became DB
and C3 will became 90.
The modifications you do will show up in red. (pic related)
Now all you have to do is repeat these steps for the other two instructions.
00093ECA: 01 -> 00
00095FF0: 894108 -> 909090
Then save the file, open pepakura and test it. If you followed everything correctly it should work fine and you're done.
If anything goes wrong (it shouldn't), just use your backup and try again carefully
This is it. If you still have any doubts, just let me know.
>>531290
Truly original patcher is unknown. Man who post auto-patches here copied his work, then i did the same.
>>531294
thanks so much....it workd
>>531313
Glad to hear it.
We both learned new things today.
>>531314
yeah I copies and saved your tut....so unless they come out with 3.18 soon, before I forget how to do it then I can stumble along like I did today....again thanks....
>>531314
yeah I managed to stumble through with minimum mistakes....I saved your tut so if they don't come out with 3.18 any time soon before I forget how to do this well at least I will have your tut to help me stumble along like I did today....lol thanks again
>>531317
Anytime..
And as long as they don't change the way it works I should be able to figure out the offsets on newer versions as long as you can find the .exe. So, one more anon to speed up the patching, I guess.
But if they change something, I guess we're fucked, lol.
>>531294
changes definitely work, has anyone figured out how to get around needing a keycode, or do I need to find something for that?
>>531455
You need a serial number - numbers from standard edition won't work.
>>531486
ahh, that makes sense. any known codes floating about?
>>531522
try this keygen:
/k4f5mu7hwi6c.html
>>531548
worked perfectly, thanks!
What is this patch for?
>>531592
It allows editing for password-protected files. Very useful when you need to change scale or layout.
hi, i try this
Manual instructions for 3.1.7 Hi Res:
0001EFE4: 0F95C3 -> 32DB90
00093ECA: 01 -> 00
00095FF0: 894108 -> 909090
but weird things happend with models, strange characters appear, if i print in pdf happens the same thing, any ideas?
>>532161
It's still in demo mode
3.18
http://www.mediafire.com/download/d43ls1k20hz113v/setup_pepakura_h318_en.exe
>>532235
Thanks. And here you go. Enjoy
000220F4: 0F95C3 -> 32DB90
0009623A: 01 -> 00
00098360: 894108 -> 909090
>>532243
thanks for HD crack....standered?
