Do any of you /p/honies DIY camera? I'm lasercutting a custom 3 hole lensboard to make tripleyed retard images.
picture unrelated
>>2764875
I made a large-format camera with my dad when I was a kid. The bellows were the hardest part to do but the rest was relatively easy
>>2764875
Ive been thinking about building one of those $10 lomo things with my daughter so she'll understand photography better. She's not quite old enough yet.
>>2764883
What do people make the bellows with? I'm working on a ceramic camera with bellows, but I have no bellows experience.
I built a 4x5 camera around a Linos XR-Heligon 95mm f/1.0. Used a Packard shutter & Graflok Back. The distance between the back of the lens and the image plane is about 25mm; which makes things really difficult.
It's setup to be able to shoot portraits. The lens's whole image circle is captured.
Fucking impossible to get focused. Over the next couple months I'm going to calibrate the focus.
>>2764933
That's neat.
This is what I'm going for with my custom lensboard: I was thinking about how the image circles for 35mm are way too small to use on a 4x5. But what if you used 3? You could get three overlapping images, like some ugly triptych.
Since I have a friend in engineering who has access to the shop, I figured it wouldn't be too expensive to produce. The only thing I'm not sure about is how to produce the threads for the lenses. I know that the threading of various 35mm lens mount standards must be a normal spacing (in mm or fractions of an inch). It has to be.
The serious flaw I foresee is that it will take 3 lenses of the same focal length to take properly focused pictures. I can't have wildly different focal lengths, unless I use extension tubes (which I have a few of, luckily).
>>2764974
Have you thought about experimenting with multiple pinholes? Should give you an idea of what you'll be getting without buying a trio of lenses.
If you can get a really accurate laser cut hole then make the diameter about 0.02-0.03mm smaller than the lens thread diameter and you can just let the lens's thread cut into the lensboard.
How are you going to set your shutter up?
