So, uh, it isn't supposed to look like this, is it?
>>15184669
Lash set wrong
>>15184669
Just use some synthetic oil, she'll be right
Zip ties will fix you right up
You lost a thrust bearing or something mang. Look for pinion damage.
Oh! rear end thread! here's mine
>>15185081
Clean all that grease off anon! it look so messy in there.
>>15185089
I prefer acetone to polish my diff. Also use it to make sure all my seals are clean
>>15185089
Refill with straight gasoline and drive about 30 minutes?
Op here, if I turn one wheel clockwise and the other turns the same way, that means I have a limited slip diff, right? At least that's what a video I watched said
>>15185426
Yes
>>15185151
....
>>15185477
checked
also, neat. the truck is 4x4 and having even more traction is pretty cool
>>15185081
that's not a rear end, it's a differential
So did you run it without gear oil or did you do WOT clutch dumps after every stop you ever made?
>>15185426
If thats your rear end in the OP, then no its not limited slip.
Hard to tell but it looks like you're missing a spider gear, and thats whats causing it to lock up, also you don't a clutch pack in there or locker.
>>15185668
Neither?
>tfw sticky tires and a 5sp in a 4k# car
>>15184669
Depends, is it a Ford?
>>15186356
>>15185151
that actually sounds like a terrible fucking idea
>>15186515
Why?
>>15186356
that'll buff right out
>>15186356
>>15186425
did something push your rear driveshaft through?
tell us the story, nigga
>>15186534
>was planning on hitting the strip the next day
>beating the piss out of the car working on my tune
>had just put some sticky Nitto 555's out back
>rear control arm bushing were also shot so it had fairly bad axle hop
>leaving driveway get on it hard, loud bang
At least it happened in front of my house so I didn't have to push it far.
Blew one of the caps into bite size pieces and out popped the carrier. I had actually bought a girdle for it because I knew this would happen, but I was waiting until I put 4.10's in.
>>15184669
Rear end carnage thread? Don't mind if I do.
Here's the Ford 8.8 I had swapped under my Wrangler. 35" tires and constantly banging through gears at redline finally took it's toll.
>>15186992
All the bits and pieces of carrier and spider gears that came falling out when I pulled the cover
>>15186992
>banging through gears
is that a varilok LSD?
you probably locked your rear wrong on a trail or something
>>15187059
Nah, it's just a stock positrac carrier with a clutch pack. I blew out 3 sets of r&p's in the original Dana 35 axle just driving like a retard on the streets. Finally I had a 4x4 shop swap the Ford 8.8 under it with a truss kit, but 50k miles of beating the shit out of it and the carrier finally popped.
>>15186375
Lolyup
>>15187075
r&p's?
positrac is a generic blanket term for early viscous LSDs
which is probably whats running on that D35
but i dont D35s are terribly weak nor can a vLSD with clutches really have the stopping power to snap a crown hub that way
you must be running an abnormally larger engine or really just driving mad
>>15187150
Positrac is actually the Chevy brand name for their line of LSDs. Dana calls them Trak-Lok or Powr-Lok.
>>15187232
right, but people often use the term positrack incorrectly or unknowingly of what it truly is
>>15184669
No.
>>15184669
It's fine. It's been engraved for "personalization".
>>15187362
It's a semi-accepted slang term, like calling all facial tissue Kleenex
Anyone have an opinion on torsen style differentials?
Have an old 323i and I'm wondering how the handling will be affected by it. Any negatives?
Comparison to a clutch type?
I know how the different styles work but I worry how handling will be affected.
I want to have more traction but I'm also happy for it to act as locked on dirt or once in a slide
>>15187150
It's just the stock 4.0 straight six that was rebuilt and bored .030 over. With the ax15 5 speed and 4.56 gears, I can turn the wheels to the left when stopped, dump the clutch in 1st and it'll pick the left front tire over 2 feet up off the ground and hold it there all the way through 1st gear if I straight the wheels out and go. If I bang into 2nd just right it'll pick it back up for another second or two. That's due in part to the garbage-tier pro comp lift 4" lift that's on it.. the springs are sagging so bad on the right side.
>>15188848
my truck has a 6.9 idi and a huge bumper on the front, so it is probably a bit too heavy to do stuff like that
