What did you do this week(end)?
Painted my W55 (steel plate one)
>>13807637
why
>>13807644
because.
I'm not stripping it to powered coat.
POR15 sticks very well to aluminium
I'm gonna top coat it some other color, maybe.
I like POR15, and paint all my components
easy to clean, doesnt chip or flake, lasts a long time.
and its blaaaaaaaaaack
>>13807637
I have one of those. Second gear is blown. Dunno if I'll fix it or but a T5 in.
>>13807671
Por15 sticks to EVERYTHING.
Hell, it might adhere to pure silicone
>>13807786
tell me about it. even though I worn gloves, they tear and get under.
and then I bumped my head on it after hanging it, got some in my hair. ugh
>>13807759
buy a straight cut gear kit
http://www.ppgearbox.com.au/page.asp?productid=42
Replaced the gear selector indicator plate, which had a residue coating it from a melted air freshener
>>13810823
>>13807644
stops your gears getting cold and cracking :^)
fuck you're cooling
>>13810832
Looks fresh af tbqh senpai
>truck idles badly when it's cold out if you don't hold the throttle for a short while
>grab two nickels
>stuff behind the linkage on the butterfly valve
>$0.10 cold idle fix
>>13810832
dat Honda leather doe
>>13809372
isn't this going to be fucking noisy ?
>>13811970
Like music to my deaf ears
https://youtu.be/dmJH84FnQa8
>>13811720
You realize there is probably an adjustable screw that does the same thing, right?
made some bottle openers out of the steel plates in this shredded transmission
Finished porting and sealing up my Blower.
>>13807637
but no one can see it
>>13812069
>$3 screwdriver
>$0.10 "spacers"
breh...
>>13812069
There isn't.
And the screw would have to be adjusted back before you drive since two nickels holds the engine at 1200rpm.
And
>>13813246
lol. you're not the first one to tell me this. I painted my old drive line red, I even painted the torque tube.
>but no one will see it!
lols, I had to replace the tt bearing and i saw it again.
and saw it again when I replaced my clutch.
Its nice and black, and easy to clean
that and after spending hours cleaning the bare metal its a shame to leave it unpainted.
I went full retard
So far; got the valve on my left rear tire replaced today, as I wasn't quite sure wether or not 11 PSI was acceptable 12 hours after filling the tires up to 40 PSI
>>13807637
The weekend has barely started.
I'm painting my garage floor. Previous floor was an uncleanable dust bowl. It only has to last through this winter during my turbo build.
>>13813303
>And
y-you ok?
>>13813303
sometimes its covered up by a plug.
also, you would need to remove the nickles before driving anyway, same amount of steps
>>13813823
>Behr paint
>not using glorious Killz basecoat
dude....
Slowly replacing the clutch on my 96 s10.
> oh god the rust.
>that's what I get for buying a 20 year old Minnesota truck
>>13816630
ive got a 90 sierra slx c1500 with not a spot of rust
>>13816630
>mfw I check dipstick and lolnooil
>>13818199
>Got new tires and an alignment done
>2 hours later, underestimate turn and drive over a curb.
why do I even bother anymore
