AR Thread / arg / Tripfag Containment General
- Home
- Board: /k/ - Weapons
- Reading: AR Thread / arg / Tripfag Containment General
"I Couldn't Think of an Edition" Edition
Old Thread: >>30528077
Trash.
>>30530336
That's no way to talk about your mother, anon.
>>30530288
Whatever works senpai
>>30530330
Why not AirForce or navy then?
>>30530332
Oh fuck, sorry senpai. It's hard to tell anons apart ya know?
>>30530326
Up in this bitch with 2,850 dollars of optic
Another pic of my new bitch that's hopefully not sideways this time
>>30530352
-$2000
>>30530352
>wrong picture
>>30530351
Cause i want to kill people maybe, but I seriously want to be a Ranger
Where should I sell all of these usless AR parts I have laying around? I dont really want any of them and cant be assed to deal with armslist "will you accept payment in grape nuts?"
repostin muh blem gucci before bed
>>30530356
Since someone asked about the optic in the previous thread, here are the details that I posted previously before the thread hit the limit
Why does anon always try to explain his kikery over not having BUIS as
>you'll never ever need it so don't bother
>>30530369
>want to kill people
See pic related
>>30530372
What parts you got anon?
Also,
>ebay
>>30530356
>>30530384
As far as the optic goes, it's a Bushnell AR/223 with a Burris PEPR mount. I can't lie and say that I'm not impressed with it. All of the groups that I shot at 100 yards were all touching groups. This room rock river upper is damn accurate that's for sure. Chambered in 5.56 of course.
>>30530372
>keep parts
>wait for hill to be elected
>sell parts for 10x what they are actually worth
>>30530394
>What parts you got anon?
ACS-L, MOE stocks, MOE handguards
Carbine length barrels
Around 60 A2 grips
A couple pounds of A2 hiders
Mil spec charging handles
A bunch of random other shit like rails and what not
Most of this is just left over parts/spares/out of date stuff. I really dont want to have to pack up 60 a2 grips individually and drive to the post office twice a day to ship them.
>>30530422
Kek.
Maybe give / throw away the a2's or make art with them
>>30530372
>Jewbay
>GunBroker
>Hope to snag some unwary plebs into buying your shit here
>>30530413
Mah nigga
>>30530392
I never shot a scoped A2 upper, isnt it uncomfy af because your cheek is raised much too high in order to use the scope properly?
>>30530447
> A2 upper
Breh
> isnt it uncomfy af
Nope, feels dandy.
> your cheek is raised much too high in order to use the scope properly?
Nope again, you only have to raise your head a slight amount considering how tightly the rear aperture hugs the carry handle.
It's not as solid as using the irons, no, but it's still perfectly functional.
Axis ambi 45/90 safety or keep mil spec?
Guy buying an AR for his parents again,
How's this for an AR?
http://www.atlantictactical.com/product/smith-wesson-mpsport2/smith-and-wesson-rifles#.V333WzV0olA
>>30530422
can you throw up a pic of most of it in a rough pile/group. Id be interested in a chunk of it
>>30530471
K, thanks,
Because I was thinking about building an A2 AR, they look damn sexy, I wish I would know where I could get triangular handguards.
>>30530492
Not sure why but there is a lot of complaints regarding the barrels on the Sport models. That's why I have a standard
>>30530504
I think qb has some, check old thread
>>30530509
Good to know, so this would be a better choice?
http://www.atlantictactical.com/product/smith-and-wesson-mandp15-16-inch-rifle-with-carry-handle/smith-and-wesson-rifles#.V334YzV0olA
if dubs I build A1
>>30530520
Yeah it would probably be alright.
>>30530525
If dubs you stop finding excuses and get a better job
>>30530326
>>30526533
>>30526357
>>30526440
>>30526295 (You) <- This guy again
So what I'm getting from this is. (Also to add going to buy more then one gun but the way everyone talked on other thread I'll give purchase order first)
Gun type purchase
>1. AR
>2. AK (Preferably with scare cash)
>3. BR (Save a lot overtime aiming for a Scar or something akin to it)
Then for the AR what I thinking you all are getting at so far is.
>16" Barrel
>Midlength gas system
>Get a scope soon after and any other attachment for it (Don't know how much I should save for them.)
Anything other then that I'm missing remember i'm fairly new to buying and making guns I'm just extremely used to handling, and shooting them but I have yet to look much into them so I don't know if this is all I need to know their may be more.
Also here is where I will most likely get my stuff and for anyone else in Virginia try this place.
http://www.colonialshooting.com/
http://www.colonialshooting.com/rva/
I'll likely buy an AR from here and here is their list anything else I should know.
http://www.colonialshooting.com/rva/wp-content/uploads/sites/2/2014/10/Freedom-Sale-7-1-16.pdf
>>30530525
Fuck I wanted a A1
>>30530535
Fug of
>>30530515
Dont feed him with prozac
>https://www.youtube.com/watch?v=mCUMv120oCw
"What is it like to fire an AR-15? It’s horrifying, menacing and very very loud.
It felt to me like a bazooka — and sounded like a cannon.
But mostly, I was just terrified.
Squeeze lightly on the trigger and the resulting explosion of firepower is humbling and deafening (even with ear protection).
The recoil bruised my shoulder, which can happen if you don't know what you're doing. The brass shell casings disoriented me as they flew past my face. The smell of sulfur and destruction made me sick. The explosions — loud like a bomb — gave me a temporary form of PTSD. For at least an hour after firing the gun just a few times, I was anxious and irritable."
Gersh Kuntzman
Globalist Propagandist
New York Daily News
>>30530326
What rail covers are those?
>>30530640
Looks like the Griffin ones. http://www.griffinarmament.com/Griffin-Armament-Rail-Shield-4-Piece-M-Lok-Furnitu-p/garsblk.htm
>>30530627
(((Kuntzman)))
I did not even have to google him to know.
>>30530627
He's been a good shit about it
what MLOK rail covers would /arg/ suggest? YHM has some pretty damn cheap ones.
>>30530326
"What is it like to fire an AR-15? It’s horrifying, menacing and very very loud.
It felt to me like a bazooka — and sounded like a cannon.
But mostly, I was just terrified.
Squeeze lightly on the trigger and the resulting explosion of firepower is humbling and deafening (even with ear protection).
The recoil bruised my shoulder, which can happen if you don't know what you're doing. The brass shell casings disoriented me as they flew past my face. The smell of sulfur and destruction made me sick. The explosions — loud like a bomb — gave me a temporary form of PTSD. For at least an hour after firing the gun just a few times, I was anxious and irritable."
>>30530676
Is that a tampon holster? Good on him for being a good sport about this
>>30530543
Tell us more about how you plan on killing the niggers anon!
>>30530515
I had a cockatiel as a young lad
he died
pls pet him for me :(
>>30530720
Wedgelok
>>30530838
I'll give them both kisses. I love my birds
>>30530941
cute
If I wanted to buy a 9 inch KMR for my A2 midlength, I would have to remove the front sight post to install it, right?
>>30531008
Yes and the barrel nut
>>30531008
Yes.
Wanted to buy a Schmeisser AR15 Dynamic but I now realised it is direct impingement whereas I always wanted a piston AR.
Should I reconsider my choice of DI/Piston? Am I a mall ninja now? I always thought a piston to be a more rational choice concerning design and where the dirt goes.
sup
>>30531117
DI is generally regarded as better. A little more dirty but less weight, generally better recoil, less moving parts.
They don't "shit where they eat" like people say they do
For anything you will ever need it to do either system will be perfectly reliable but there's a reason more people use gas instead of piston
>>30531117
>>30531152
Also with piston, you're stuck to the brand that makes the piston, they are the only one that can sale you spare parts.
It's like buying an H&K versus a glock in France. You may prefer the HK, but in the end, when you'll need parts, good luck with the wait, the disponibility or the price.
>>30530356
Is that the Bushnell with the throwdown PCL?
bought another AR15 today. i wanted an m4 clone build as something different and this FN collector one was at my LGS for a p dece price so i went for it. did i do okay? wat should i do now? ta31?
>>30531424
that sopmod stock did not come with it just to clarify.. had it laying around so i put it on. am i gay and retarded if i spray this gun with some aervoe?
pic related: my other AR
anyone have a vortex sparc 2?
>>30531424
sexy
use the irons for a while
in
>>30530326
what a shit op
>>30530326
>always posting the same gun
>wont post the build list
i just want to strangle you bro
>>30532015
That's not his gun
>>30532030
then he needs to stop posting it.
>>30532038
Tell him that.
>>30530326
>All I can do is sit here and look at these guns because theyre illegal where I live
>>30532083
get some airshit
>>30532083
sucks senpai. lib state or euro?
I'm planning on building an ar. What's the best stripped lower to buy for cost? Also parts kits. Thanks.
>>30532092
Europoor.
The most I really could get is a shotgun license, and all that lets me own is a double barrel shotgun or a 2+1 pump/lever action. Even then in my country theres barely any shooting ranges and they are rarely open.
>>30532088
>oy vey u need a license for this hard plastic toy gun
I wish I was joking
>>30532106
anderson lowers are the cheapest. other forged lowers in the $100 range include mega arms, aero, MI, Spike's, PSA. the aforementioned companies make good parts kits.
Looking for a handrail like this one but in 7"~ length
Can someone help me out? I like the lines it has on it and the cylindrical shape
>>30532120
that sucks. I would try my best to move if I was a yuro or join .mil
>>30532141
pretty close
http://slrrifleworks.com/index.php?route=product/product&path=66_106_137_70&product_id=114#!prettyPhoto
doesnt have lines on it but available in 7" and is quite cylindrical
http://aeroprecisionusa.com/ar15-enhanced-mlok-handguards.html
>mfw just received handguard I wanted
>mfw gonna buy muzzle brake I want for a good price
Yah boi
>>30532183
yuck
>>30532015
You could always ask you fucking retard.
Alternatively, consider suicide.
>>30532213
good looks pussyhole
>>30532209
ALG rails look like siding, did you expect something similar to look cooler? I'd go with the aero enhanced rail, they're nice. MI also makes a bunch of mlok rails that are cylindrical and slim
>>30531779
Do you know what kind of mounts that optic will use?
>>30532220
Don't be talking shit bruh I'll shove this handguard up a place you won't want it, blemishes first
>>30532216
Are you that anon I replied to?
>>30532230
>has fuck huge gouges
that's one hell of a "blem". if you're going for that sleek space gun look I have no idea why you bought an ALG rail. They are neither sleek nor futuristic looking. fite me
>>30532230
yes
right now im trying to decide which base ar to buy and build off from
>>30532230
what handguard is this gypsy?
>>30532246
>fuck huge gouges
I'm not going for a sleek space gun look at all really. I truly like the way the v2 looks and feels.
>>30532252
You could have always just asked me to post it, I have before.
>>30532258
ALG EMR v2. See >>30530437 image
>>30532136
Anderson lower is 60 dollars at a local gun store. Are they good quality? I'm worried it's gonna be shit.
>>30532270
It's fine. There was apparently a few batches with a non standard grip screw size but I'm hearing they fixed that.
Are 10"-12" pistols/SBRs serious weapons or just too much of a compromise from the original intended 20"? I want something lightweight and easy to carry for Kayak camping when they coyotes get a little too bold.
>>30532270
they're fine, for all intents and purposes any forged milspec lower is the same as the next one. I use aero lowers because they're affordable and the rollmark is sharp, but you wont see any difference in performance between one forged lower vs any other.
>>30532281
y-y-youd tell me if you were a shill, right senpai?
friendly reminder that if you have dickmod handguard you should kill yourself
>>30532298
No, but I'm not a shill for anderson, I'm a shill for PSA, ALG and S&W long long before Anderson
>>30532308
Mlok mustard race
>>30532286
>Are 10"-12" pistols/SBRs serious weapons
probably
>>30532286
https://www.youtube.com/watch?v=98VXY77F690
20" Barrel:
*Average Velocity: 3058 fps
*Average Energy: 1142 ft/lbs
*ES: 111 fps
*SD: 31 fps
18" Barrel:
*Average Velocity: 2996 fps
*Average Energy: 1096 ft/lbs
*ES: 130 fps
*SD: 40 fps
*Barrel Length Reduction from 20": 10%
*Energy Loss from 20": 04%
16" Barrel:
*Average Velocity: 2946 fps
*Average Energy: 1060 ft/lbs
*ES: 85 fps
*SD: 27 fps
*Barrel Length Reduction from 20": 20%
*Energy Loss from 20": 07%
10.5" Barrel:
*Average Velocity: 2564 fps
*Average Energy: 803 ft/lbs
*ES: 94 fps
*SD: 32 fps
*Barrel Length Reduction from 20": 47%
*Energy Loss from 20": 30%
https://www.youtube.com/watch?v=KLiSgs41lek
Ballistics take a dive as the barrel gets shorter, obviously, but short barrels are still delivering a pretty formidable punch
>>30532315
Hey Gaylord I asked if you have any 223wylde stuff last thread
>>30532315
That's why I'm asking, because the US military decided not to go below 14.5". I guess I'm asking if it's stupid to go any shorter than that.
>>30532334
no
you can have this rainier arms 16 stainless for like $100
>>30532335
>because the US military decided not to go below 14.5"
since when
>>30532339
But that's not what I need reeeeeee
>>30532350
you realize 223 wylde is a gimmick right?
the barrel quality needed for that rifling lead change to make even the slightest bit of difference is far, far beyond the price range of most barrels touting that as a feature.
>>30532367
Where is the proofs??
Seriously, everything I've seen has said it offers a legitimate improvement in the price range I'm looking at
>>30532379
and wheres the proof that it does anything
people on forums that swear it makes a difference aren't worth anything
the marketing you're reading doesn't mean anything
there are 556 barrels that shoot really really well, and there are 223 wylde barrels that shoot really fucking shit, and it tends to be about how much you spend on it.
anyway that rainer barrel i'm trying to sell you shoots like shit, but it's $100 so you should buy it
it's got spiral fluting to reduce drag
>>30530763
No, fuck him for being a piece of shit.
>>30532409
Well if it shoots like shit then sell it to giddy and watch him squirm
>>30532409
how much for that stripped upper ya faggerino
Wtf
>>30530543
Colonial is pretty good. Theres another shop pretty close by called Coastal gun works. Cute dad and daughter operation that charges 20 for transfers.
>>30532426
Your wife has been looking that up that's why it's popping up
>>30532420
it's not for sale
it's a daniel defense upper without any version markings on it
unless you want to pay like $200 for exclusivity~
>>30532441
She doesn't use my phone
>>30532444
Kek rip pb
>>30532345
Since forever
Everyone knows that
>>30532444
oy vey
>>30532466
god damn what did i build this piece of garbage for
>>30532473
is that anti pin thing worth it
>>30532473
Shooting paper, these guns are for looks only and maybe shooting squirrels
>>30532481
no
>>30532486
when is the ATF going to come by and rape you and your dog
Selling my upper and building a new one and can't decide between 16" or 14.5 and pinned.
Also, KAC URX III, Geissele, or BCM KMR?
>>30532514
yes
>>30532501
Why would they do that, photoshoop isn't illegal: ^
>>30532441
kek I was going to say the same thing
>>30532522
i would like to think the ATF is that stupid
>>30532345
What's up with these idiots here recently?
>>30532528
I'll just claim stupidity and the fbi will let me off.
>>30532534
it's 4chan
>>30532538
incompetence*
>>30532543
Nah they've been way worse Than the average mouth breather. I guess it's the summer shit posters
>>30532515
Thank you for your help
>>30532560
>summer
/k/ is filled with mouth breathing retards all the time
>>30532568
that's what i'm here for
>>30532571
Really though, are there any disadvantages to going with 14.5" pinned other than being able to swap out muzzle devices easily?
>>30532581
no, not really
>>30532568
what other pistols do you have, how do they compare to your 226
FBI HEARING REGARDING CLINTON
>FBI HEARING REGARDING CLINTON
FBI HEARING REGARDING CLINTON
>FBI HEARING REGARDING CLINTON
FBI HEARING REGARDING CLINTON
>FBI HEARING REGARDING CLINTON
FBI HEARING REGARDING CLINTON
>FBI HEARING REGARDING CLINTON
FBI HEARING REGARDING CLINTON
>FBI HEARING REGARDING CLINTON
https://www.youtube.com/watch?v=ZAjP5xUHZyE
>>30532601
thats one ugly motherfucker
nigga look the predator from Alien vs. Predator
>>30532593
P239, 1911, S&W 442 and currently debating between a Springfield Champion Operator or a HK USP Compact.
I've sold more handguns than I own now but it's by far my favorite. And it's the nicest Sig I have owned. I used to miss my German P220 until I bought the P226 Legion. I'm only a little bummed because like a month after I bought it, Sig announced they're making a P220 Legion.
>>30532620
how much did you pay, site says over $1000 whats the street price
>>30532628
I paid $1200. I thought it was worth the extra $200 over the MK25.
>>30532601
Do you need a referral to review her statement
>no
Oh, well you will soon motherfucker
kek
>>30532634
yes*
Also
>would the FBI give hillary security clearance
>I don't want to answer a hypothetical
>>30532522
>possessing lewd cartoon pictures of nonhuman fantasy creatures that look like they might maybe possibly be kinda underaged is illegal in half the US
If you havent noticed, law enforcement blindly follows the orders of retarded politicians and they'll find a way.
>>30532514
Have you already invested in either dicklok or shelfmod?
Do you want light, ergonomic, or aesthetic (can have 2 but not all 3)?
>>30532633
>I paid $1200
ssheeeeeeeeeeeeeeeeeeet
ill just get a mp9 range kit for now. i have some rifles i wanna buy first
>>30532581
15" rails dont allow suppressors.
>>30532662
Nope, I'm going from LaRue quadrails and thinking about trying out mlock or keymod.
Otherwise there is always the DD RIS, but I wasn't looking to spend quite that much.
>>30532673
Depends on the rail
>>30532673
I planned on going 12" or 13"
Alright anons, is it worth building an AR before the next president is inaugurated? Worried I'll spend $800 building my first rifle just to have it banned.
>>30532543
>incompetence
Silly me, can't even get the words right.
oh my god you guys, you need to watch this livestream or head over to /pol/
comey is getting ROASTED
>>30532703
Yes
>>30532713
You mean this one?
>>30532601
>>30532684
Ok.
Well, the urx is aesthetic and ergonomic. The guysnamedlee is aesthetic and light. The kmr is light and ergonomic.
Other options are the NSR and its mlok clone, the SMOS.
>>30532690
Still a drawback
>>30532286
Go with 11.5" if you can, but even 10.5" will seriously fuck up a coyote or three at anything I would consider defensive distances.
And if you are willing to spend a more than m193/855 prices you can get bullets that do pretty well out of short barrels.
>>30532728
I like my MK8, it's notas comfy as my old diamondhead, but definitely not bad.
My thumb fits nicely in the portion between the top rail and side Mlok area
>>30532745
Its not horrible, but of the current crop of gucci handguards its the least comfy to me, and fat enough to not be great for TOB.
Thoughts on PSA AR 9?
>>30532769
Not qc10, therefore shit.
>>30532727
yes
oh my god there's a black man, a white woman, and a black woman defending Clinton. None of them can even articulate a fucking point.
you can't make this shit up
So the barrel nut is stuck in place on my rail. Just tight tolerances is all, it's not burred or anything.
Last night I called ALG and left a voicemail explaining my dilemma with my name and number attached and CS just called me back.
He explained to let some penetrating oil soak into it then kinda slam the rail down onto it barrel end first and push it out.
He also mentioned that he googled my number and gave me some time to wake up before calling, which I felt was pretty fucking cool.
>>30532846
You seriously couldnt figure out a friction fit on a cylinder?
which one should I get fagbois
http://www.midwayusa.com/product/3058222457/troy-industries-alpha-battle-rail-modular-free-float-handguard-ar-15
http://www.midwayusa.com/product/2344326606/midwest-industries-3gm-series-free-float-gen-3-m-lok-handguard-ar-15-aluminum
>>30532867
Neither
>>30532857
I wanted to use whatever method they use.
I had considered just screwing the whole thing onto my current upper and yanking it off but I decided better safe than sorry
>>30532894
Something about Troy literally causing Waco and 9/11 and nerve gas
Is my barrel nut supposed to be in there already? It's tight as fuck.
>>30532910
You will need to remove it.
Just got off the phone wil ALG and they told me to let it sit overnight in whatever oil use then smack it out with a broom handle.
>>30532914
Fuck wish I knew that before.
basic catchup for fags not watching the livestream
>republicans ripping some fbi ass
>hilldog clearly lying repeatable brought up among other negligence
>democrat negros bringing up daily stormer and completely other unrelated shit like mike brown and muh racism
>>30532941
Not a big deal senpai
>>30532941
screw the stripped upper into it and firmly pull it out
>>30532910
I did mine last night. I put a hex wrench through the mlok to get it started.
>>30532894
Better options for same or less monies
http://palmettostatearmory.com/psa-16-5-56-nato-1-7-mid-melonite-13-keymod-freedom-upper-w-bcg-ch.html
Buy or no?
Can anyone confirm that a 13.7" barrel with a pinned and welded BE Meyers 249F is 16"?
I've already got a 249F lying around and that would be nicer than 14.5" with it.
>>30532955
>>30532951
Thanks ma'dudes. Will post finished AR later.
>>30532955
Stop getting your faggy friends to watch my ebay listing.
>>30532996
Google anonarino.
http://www.ar15news.com/2015/01/29/new-weapon-outfitters-13-7-barrel-meyers-249f-combo/
>>30532703
use an 80% lower
>>30532995
p-pls respond
>>30533116
Could do worse tbhfam.
>>30533116
its fine for the price point
>>30532703
Hey dumbass, it's against the Constitution to make something illegal after you have done it. So you'll always be grandfathered in
>>30533107
What selling?
>>30532703
Go ahead and turn all your guns in now before the big rush. Or KYS, that works too.
>>30532910
>Screws installed
You took those out already, right?
>>30533170
Surplus A1 upper >>30530440 and my drop-in MI quadrail.
>>30533182
Wish it was mid length. Oh well good luck
Rate my build
>>30533182
Oh. A1's bring stupid fucking money, good luck.
Do they actually let rifle part listings slide now? I desperately need to sell a complete upper to fund something else.
>>30533201
10/10
>>30533199
>Wish it was mid length.
It is.
>>30533222
>Do they actually let rifle part listings slide now
You gotta be careful with your wording, even mentioning it's an AK or AR part gets the listing autonuked.
>>30533107
i didn't do anything
Will 80 percent lowers become illegal in CA with the new CalIfornia legislation?
>>30533274
pretty sure your govna was too fucking stupid to understand that one so he vetoed it.
it probably becomes illegal when you finish it though
Why do niggers keep doing things that get them shot and then blame cops ?
>>30533293
You mean the guy who had a carry permit?
Or the career felon who got shot in Baton Rouge?
>>30533341
The dirtbag niggers doing stupid shit, not any one even in particular
Whats everyone up to today?
At an antique rifle show here.
>local beer named Speedgoat
MSD, this place is right up your alley
Is nitride bolt carrier good? Gonna build an ar soon
>>30533385
What if I prefer slowgoat?
>>30533385
Being dead apparently
>>30533385
Work
>>30533397
Yes
>>30533454
hey fuckhead where exactly in manistee were you camping
>>30533454
Nice try skinwalker.
>>30533429
Too bad.
>doors have been open to exhibitors 27 minutes
>already $2500 poorer
>>30533170
Already tried friendo, didn't work out. Thanks for the advice though :^)
>>30533158
Expost facto would not apply to outlawing certain guns. While most gun banning laws include a grandfather clause, they don't legally have to. Expost facto only applies to acts you performed in the past that become illegal now.
Say they made purchasing and owning ar style rifles illegal today with say a 30 day grace period to get rid of your ar style guns. You couldn't get in trouble for buying your new ar a week ago even though what you did is technically illegal now. You could still be charged at the end of the grace period if you kept your illegal gun though.
>>30533467
you work at adv out.?
lol ive probably met you. im in there almost every weekend
>>30533454
>>30533481
yeah nice try
we know how this works
the skin walker takes you and then assumes your appearance and identity
pfft you think we're this stupid
>>30533485
Whoops forgot pic
>>30533502
Unfortunately no. :(
That's the rifle range at GA Firing line, I make jewelry near woodstock
>>30533527
im a jeweler!
and also love ga firing line.
are you in the groupme for the north ga meet?
>>30533532
I am, I think I'm on the email list haha
>>30533532
>>30533527
Look, more GAfags
>>30533544
im brett f in the groupme. send me a private chat
>>30533554
Will do when I get the chance
>>30533570
yeah id like to see your stuff. im a jeweler in the acworth kennesaw area
>>30533546
You know I'm a GAfag you goof
>>30532439
GODDAMN that's cheap for a transfer. The two guys in Williamsburg want $46 (George Christie) and $37 (other George who's really out of the game but keeps an ffl just because)
>>30533585
I know both of you are, didn't know killbarn posted in arg though
>>30533631
i actually dont really post here. i dont own an ar yet but i am looking into buying an ar pistol.
>>30533631
i had an a2 clone for a while and a colt ar15 but i have since traded or sold them to buy other stuff.
>>30530326
I want that stock so bad but I don't have $250 for Magpul's overpriced bullshit
Alright guys, my drill press is arriving today and I'm going to attempt to mill an 80% lower with only my $90 drill press and no router because I'm a cheapass, will post results later
>>30533713
just go buy a trill-ass router, they're like $150-$200 and you can make countless lowers
>>30533713
Oh boi here we go
>>30533697
shit weighs 2 fucking pounds
>>30533738
Its to my understanding that most of the parts in an AR's trigger pack are held in by the pin holes so if I don't make the sides or bottom of the milled out area beautiful it won't make much of a difference, is this correct?
>>30533697
I dunno if it's overpriced, it locks up tight, has a consistent cheekweld, and is widely considered the most solid stock on the market for an AR. The downside is that it weighs a literal pound and a half, which also makes it the heaviest AR stock on the market, I believe.
>>30533833
So does it really do anything better than a CTR?
>>30533591
my place is $5... wth
>>30533839
I'd say it locks up tighter and the consistent cheekweld is really nice. I'm not getting one though, that weight and pricetag are a turnoff. Plus it looks like complete AIDS on anything other than 18" or 20" barrels.
>>30533546
Kill'em with fire!
>>30533805
You're probably gonna be okay
>>30533473
Irons, I'm in Traverse now tho
>>30533504
Not a skinwalker
Shoot an ar with Geissele trigger. This is not worth 200 dollars kek
>>30532120
where in euro?
>>30534130
What trigger?
>>30532367
>you realize 223 wylde is a gimmick right?
>the barrel quality needed for that rifling lead change to make even the slightest bit of difference is far, far beyond the price range of most barrels touting that as a feature.
screencap worthy. you can't make this shit up.
So everyone here agrees that DANIEL defense, LARUE, and other exotic overpriced DI guns are pretty much over priced garbage with no real innovation. Right?
>>30530326
What's a good way to "degrease" citristrip so I can paint again? CRC natural degreaser? Citristrip label says to use mineral spirits to get rid of the resi use. Will mineral spirits mess with anodizing? I like the spray degreaser because it evaporates immediately and I can just point and shoot
>>30534206
In theory, considering the weight the brand names hold, you're paying for guaranteed quality, because the companies names are on the line.
In reality, they're pretty much just overpriced. Not garbage, though.
Aero Precision and BHW all the way, brah.
>>30534206
>Daniel Defense
>Exotic
Daniel Defense is pretty firmly in the "good" bang for buck ratio zone.
Larue's everything is overpriced, but his/their rifles are expensive toys for people with more money than sense.
>>30534130
>t. "Muh milspec FCG is just as good" anon
:^
>>30534206
>poorfag tears
>>30530352
And still not as practical as this
>>30534070
that's just what a skinwalker would say.
>>30534206
you should leave
>>30534130
>>30534399
Lmao kys
>>30534452
Get a real job
What else should i add to my rifle?
I have a NM 2 stage trigger i could put in, but the stock trigger is pretty good so i havnt touched it.
I thought about switching the flash hider out, but i kind of like the look, and it works pretty well in the dark.
Sling is in the mail, and im still not sure on the light.
>DD m4v5s
>14.5 mid
>kac micro rear, DD fixed front
>aimpoint t2 on a DD mount, full witness because 1/3 was too high
Pic related
>>30534452
My rifle has everything it needs, and nothing that it doesn't
>>30534463
Move your front sight forward and get better furniture
>>30534472
Who are you
>>30534462
You sound like a broken record
>>30534206
>DD
>exotic overpriced garbage
If pic related is your dream AR, then yeah.
>>30534477
Had to move the fixed sight back because im ocd and it didnt line up perfectly in the aperture.
Major reason i got a DD was because i liked the furniture.
>>30534130
Which trigger?
>>30534399
Good lord, never realized just how much carbon build up there was on the rail.
I should wash it.
>>30533849
location?
photos of DD lite rail on mid length AR with the normal front sight post instead of a lo pro gas block have a hideous gap, while same set up carbine length does not
what about 12.0 rail, rifle length gas?
>>30534267
I just realize that you finally started using QD swivels on your sling...
>>30532339
I wish you weren't selling that 18" pencil to your neighbor
I want it
>>30534582
do you want to pay $200 for it
he never back called about it
>>30534595
Do A1's use Pencils or Lightweight profile barrels? I'm not sure if I'm comfortable running a pencil
>>30534595
That feels high, I can get a faxon gunner for that much.
More specs on it?
Specifically weight/ gas/ roundcount/ who made it
>>30534612
A1 is like .61'' or so
>>30534632
https://www.westernsport.com/product/adams-arms-voodoo-18-rifle-evo-ultra-lite-750-barrel-5-56/
it's this one
>>30530422
I resell shit on Ebay all the time. I'll take a bunch of that off your hands, provided you sell it to me at a low enough cost to allow for a profit margin.
[email protected]
>>30534612
why would you be uncomfortable? the weight forward for the handguard on A2 and later served no fucking purpose?
weight behind the gasblock on SOCOM type M4, in the process of become standard issue, i will concede, has some use ... so as to not bee too much of an old fucking man
>>30531637
Fug what rail? What scope? Whatgrip?
>>30530422
any chance that ACS-L is black, and for a commercial tube?
>>30534712
fuck
ignore my second question mark
anyone here a fan of gas pistons?
I'm not kidding they must make this for $10 it's ridiculous to charge $200 for it and all you ar fags buy it anyways kek. Waste of money desu senpai
>>30534712
Because SOCOM and LW profile exists
>>30534740
wait
stop
i slept like shit last night
are we both talking about .625 gas block, skinny behind the handguards (like, can mount a 203) then skinny after the .625 gas block?
because thats what i call LW, like the popular ones BCM makes ... and A1 ... and a lotta folks call that pencil weight
>dont call me retarded bro
I. FUCKING. HATE. THE ATF'S WEBSITE.
It's fucking archaic, slow, old, and unintuitive.
Did I mention slow?
It's so fucking slow that it doesn't always register when you click submit. It's done that to me TWICE with two different Form 1s.
Thanks for putting me a month behind, you piece of shit website.
>>30532466
>Who Was Colt Commando
>>30534774
Yeah you know what its probably fine, I run a LW profile on mine anyways, I've just seen some REALLY fucking thin barrels that weren't covered by a rail.
>>30534737
Centurion Arms 12.5 CMR or Knights Armament URX 3.1?
>>30532286
Shortest I would go with .223/5.56 is 11.5". I wanted shorter so I went with an 8.5" 300blk
>>30534727
i dont bash them or worry about carrier tilt or anything, or subscribe to "but then you have to clean the piston!"
because hey, all that gunk being way up front seems a lot less filthy to me ...
...
... however, i never minded the way the AR gets dirty in the first place. it was never an issue. i dont keep my rifles autistically clean and they function fine for me. only issues ive ever had were magazine related, and now i use PMAG only. google BCM filthy 14
Anyone here own anything buy northtec defense?
>>30534855
i always liked the gas piston concept, even though theres nothing wrong with regular DI. my LWRC came with a free aimpoint T-1 so I figured why not.
>>30534568
>Dat gif
hahaha
I've been using them for a while on the front, the rear I just recently stopped looping through the stock itself so removing it was a lot less involved.
>>30534886
holy shit, how did you score that?
makes it worth the extra money (i think?)
>too lazy to crunch the numbers
>>30534886
>I always liked the gas piston concept
There's nothing wrong with piston rifles, but shoehorning it into an AR doesn't solve anything, and only creates new problems and failure points.
Also, it gives you piston pop if you're suppressing.
Few questions.
Commercial or mil-spec buffer tube?
Lightweight or medium barrel?
Is the Geissele SSA trigger worth it over the standard mil-spec trigger, even for a new shooter?
>>30534924
it was back in 2015 if i remember, LWRC was doing a promo with aimpoint. basically, buy any LWRC rifle, do the mail in form, and 2 months later a free aimpoint T-1 micro showed up at my door lol. But overall though LWRC is really just a brand. The full ambi lower is cool and all but still.
>>30534958
Milspec buffer, absolutely no reason not to.
Lightweight barrels are great, and the less weight the better
>>30534965
fuck i shoulda paid attnetion to that
id have just turned both and put the cash towards a BCM upper, a compm4 and credit card debt
>>30534489
Roger why?
I swear this thing is more a bronze than FDE or black
>>30534790
>who was retarded anon
>>30534541
You would wash it for me
>>30534980
>roger
What
Thinking about getting a better trigger what's a good cheapish one?
>>30534995
You asked who I was
>>30534981
>>30534958
1. Mil-spec, only because more compatible options.
2. If precision shooting is not part of the package, I always opt lightweight, makes a huge difference in handling and overall weight.
3. I tend to say no. If you are going for precision it is a hell of a good trigger and can have a decent impact, for your average AR owner it's hard to justify the price for the relatively little bit gained.
>Inb4 Geissele is god
Yes, their triggers are fucking excellent, no they will not make a 5 moa standing shooter tighten up to 3 moa or better. Focus on the fundamentals and if you get to a point you are owning every aspect of your shooting and you think the trigger is somehow fucking you up, swap it out.
Standard triggers are also extremely safe compared to some of the lighter, competition focused triggers out there, so there's that.
>>30534976
to be honest though you didn't really miss out. The ar is just an ar in the end, and I didn't plan on running the T-1 for a while anyways cause I wanted to just run it with the LWRC irons for a while.
>>30534958
>medium
i was saying a minute ago, the extra weight forward of gas block is fucking useless
SOCOM serves a puropse if youre _that_ concerned about shit, but light barrels have a lot to commend them
>>30535009
no lie, my favorite setups have CONSISTENTLY been sportical uppers on gwacs lowers
they dont get me a seat at the cool table, and i dont stake my life on them, but for punching holes in paper who gives a shit?
Is midwest industries rails junk? I want a quadrail for my middy that drops in and it looks like my best bet. DD is way too expensive and looks retarded
>>30534958
Milspec
Depends on what you want; SPR/Recce? Medium. General purpose carbine? Lightweight.
The Geissele trigger is definitely worth having at LEAST one of.
>>30535070
Most people are satisfied with theirs.
However, I had one completely fail on me. The whole hand guard walked off the barrel nut. When I re-installed it and torqued it down, the tightening bracket broke off.
>>30535070
My MI is solid and works well, MSD and Operator as fuck also run MI.
>>30535070
I've always heard generally favorable reviews from folks using MWI rails. Main complaints being they are a little heavier than expected (but I guess reading the weight and general spec before purchase might help some folks). I wouldn't hesitate to try one out if I thought it looked good.
Sucks there's nothing from KAC between the M4 and M5 RIS/RAS. Best drop-in rail system in existence there as far as I'm concerned.
>>30535070
>>30535101
Not the drop in rail, mind you, I'm just commenting on MI in general.
If you just want a drop in rail system though, hit armlist or arfcom and get a KAC quadrail.
Barring that, MI will prbably be fine, the DD EZ rail is good, and Troy also make a drop in.
>>30534995
Who are you then?
>>30535008
>>30535082
I plan on taking a few carbine courses, eventually moving on to 3-gun. It will be my only AR15 for a long time, as I want to buy other guns that I like.
>>30535124
he's bob
any reason to not use PSA stipped lowers for builds?
>>30534995
Why is bob interested in me?
>>30535140
I fucking hate it when people call me bob
>>30535125
Everyone will have their own opinions here. Unfortunately the AR virus hit me hard and I've been through a shitload of different guns in a relatively short time. There's one that has never left though and that's that ugly green piece of shit I post.
LW barrel, "standard" trigger from BCM which honestly feels like a mil-spec with some polish put into it to smooth out any grit. It's my fun gun, class gun and occasional local weekend competition gun.
The precision lower has the best bubba-jobbed single stage I've ever felt from the previous owner. I would probably have a G trigger in that lower if it weren't for that, because trying to be accurate at 500m+ is tough enough without a "combat" trigger.
I would recommend trying whatever comes with the lower or LPK you buy. Decide from there.
>>30535181
It never left because literally no one would buy it
>>30534653
Not sure if want
Price makes sense now
>>30535195
I could sell that today on the local boards if I wanted to, just needs to be priced right. Point being I've never tried, has filled the role well for 80% of the shooting I generally have the time to do.
>>30534132
UK and its shit. Best part is american girls have 150 million people to choose from, so why would they choose me?
>>30530326
The blemish gods have smiled upon me
>>30535181
>The precision lower has the best bubba jobbed single stage I've ever felt from the previous owner.
I only like a single stage trigger in a bolt action rifle. I much prefer a 2-stage in an automatic.
>>30535218
For $700
>>30535218
Oh, I'm not sure if I ever asked you, do you need a helmet for any future NVG rig you buy?
>>30535250
I generally agree, but since that gun is pretty much bench only it just feels too damn good to get rid off. It's got the most buttery smooth, consistent and predictable pull and a break that you just slide into. Still heavy/long enough that it's not what I would consider hazardous for anyone with shooting experience.
I'm assuming you have to re-zero that gun between night and day shooting sessions or do you have some wizardry that allows you to shoot during the day with the scope up there?
>>30535268
Honestly NV is probably so far out I'd have to skip it at this point. What's the asking price with NV mount and all?
>>30535222
>Best part is american girls have 150 million people to choose from, so why would they choose me?
lol what
you norn iron/scotland? or the unspeakable
>>30535261
That's probably not far off, I don't know if I would get that much though given wear internally and externally. ARs are cheap and abundant and VA's gun market is generally saturated. The lower would fetch more money than the upper/bolt/carrier group.
>>30535268
>that rollerblade buckle on your helmet
>>30535307
I'm trying to get $300 for the whole kit n kaboodle.
It's a gunfighter cut ACH. Comes with Team Wendy EPIC pads and chin strap.
The NVG mount is a lightweight CADEX--That alone is worth over $300:
https://www.cadexdefence.com/products/helmet-electro-optic-mount/nvg-helmet-mount/
But the dealbreaker on it for was that my ARC rails wouldn't go on it, so I'm going to stick with my old setup.
>>30535351
Fuck that's a good deal. If I don't jump on it, I have an uncle and a couple friends with nods who might be.
>>30535351
Does it have any ballistic capabilities, I'll take right now if it does
>>30535395
Yeah ACH is military issue ballistic. If you are in the market you should definitely take him up on that, I see that type of setup fetch much more around here. Plus you get free PoG stink.
>>30535395
Yes, it's an Army Combat Helmet. Rated for 9mm, frag, etc.
>>30535414
>>30535395
>>30535351
Just an FYI/full disclosure, it wasn't drilled for a NVG plate. That's why it's got the cadex mount--but as mounts go, that's about as gucci as they come anyway.
>>30530326
Hey tripfags, new bread when?
>>30535351
So ARC rails wont mount to it
>>30535472
Whenever you make it.
New thread >>30535497
New thread >>30535497
New thread >>30535497
>>30535487
Correct, because it's gunfighter cut.
However, Cadex also makes a line of pic rails that look like they'd work just fine on it:
http://www.cadexdefence.com/products/helmet-electro-optic-mount/side-mounted-helmet-bracket/
>>30535001
ALG ACT or even the Right To Bear coated one
>>30535104
I'm genuinely mad that neither KAC or Geissle makes a 9 inch rail.
![WP_20160525_003[2].jpg](https://i.imgur.com/bxOhYB8.jpg "WP 20160525 003[2]")
![WP_20160706_007[3].jpg](https://i.imgur.com/YWER6zZ.jpg "WP 20160706 007[3]")
![WP_20160122_005[1].jpg](https://i.imgur.com/56EFm0P.jpg "WP 20160122 005[1]")
![WP_20160705_005[1].jpg](https://i.imgur.com/tcpFZXb.jpg "WP 20160705 005[1]"){kind=small}
![WP_20160426_007[6].jpg](https://i.imgur.com/Ncik8ed.jpg "WP 20160426 007[6]")
