kill all slavs edition
old thread >>30403194
t4 pls
>>30405487
Post AR transformations.
Mine is in the old thread.
>>30405449
>>30405464
>>30405474
>>30405493
>>30405506
for 13.7 pistol Geissele anon
>>30405508
>anon is a slavaboo
into the trash ya go
>>30405487
Are these sneakers ARG approved?
And should i get a MRO or ACCUPOINT
>>30405519
here is my first
>>30405526
fuck no
>>30405519
E V O L U T I O N
>>30405536
now
Best 5.56 coming though
>>30405523
but t4 i like AR's
>>30405519
>you should replace your shit light :^)
>>30405526
Better than your Chucks
Accupower
>>30405549
gib optic
>>30405487
Black hills 77gr otm 5.56
>>30405519
you're the gray highlight guy aren't you? i'm still waitin to see my idea come to fruition!
>>30405551
Is that a Tavor?
>>30405526
onitsuka tiger master race
>>30405526
>pumas
Persian PLZ go
>>30405519
Pic related is my first
>>30405562
Don't get the light shit started again Suchka you whore
>dat spider web making the light reflect
>>30405573
Ye, I'll get around to it one of these days. I may be selling my AR and building on a billet receiver set, probably the Rainier Arms set.
>>30405564
dem annular crimps
i wish they'd not do this. i prefer 3 point stake crimping, easier to reload and less material lost when reaming the pocket out. you just remove 3 little points instead of a whole ring of metal.
>>30405562
ok but you gib optic too
>>30405560
you can stay
>>30405519
second
>>30405586
too many people bashed you about the spikes lower huh?
get a mega set, they're hella tight fitting.
still tho, gray look gud i suspect
>>30405519
third
>>30405564
fug
>>30405430
cbc crimped and sealed vs black hills non crimped or sealed.
>>30405593
so the black hills is crimped?
that's the red box stuff
>>30405597
>you can stay
but i like ak's too
>>30405519
current
>>30405618
every single round you've posted so far has crimping u dweeb.
americans like to use annular crimps
>>30405621
you can leave
>>30405645
no t4 you are being unreasonable
>>30405611
Nah it's not about the lower, I have a buddy that wants an AR now and I might take that opportunity; I've always liked how the billet looks.
I don't think the MEGA set would fit this handguard; I'm keeping that. I know Geissele users have issues with their handguards on the MEGA upper because of the anti-rotation lock they use, and the Midwest uses a similar system. The Rainier set looks more open around the end of the upper, unlike the MEGA.
>>30405634
cool, so then the only difference between the red box 77gr and .mil mk262 is the sealant
>>30405658
oh true, yeah we were talking about that geissele rail not fitting on that one dudes mega set.
>>30405586
Now Anon thinks I think lights are more important than everything else
>>30405597
I might just paint mine black and put it on the new RIS ii upper
idk
>>30405519
You want a transformation?
Ok.
>>30405672
man mfw you dont know what crimps look like.
buncha fuckin noobs in here
but yes, all the rounds you've posted are crimpled. you can tell by the displaced metal all the way around the primer in the american loads. the non american ones use 3 spots of displaced metal to hold it in place instead of a whole ring.
>>30405683
This was the height of aesthetic for those two.
did i do gud on my build?
>>30405672
>>30405618
Where could one purchase mil mk262?
>>30405689
>crimpled
i should kms
no i meant to say that..... yeah thats it. i was being funny. hehe crimpled.
>>30405487
also have some slavshit
>>30405655
ok just 4u
>>30405676
what reticle ya have?
>>30405578
Its a FAMAS
>>30405691
>either one of those guns
>aesthetic
pick one l m a o
>>30405700
kys
>>30405694
>did i do gud on my build?
>keymod
NO.
>>30405714
>pick one l m a o
the top one is vaguely more aesthetic than the bottom one.
what even is that fucking rail on the bottom one?
>>30405691
Then /ARG/ happened.
The end.
>>30405726
>Falling for the mlok is superior meme
Its equal...
>>30405694
rail 2 long scope 2 gay stock 2 pleb
>>30405714
no fag
>>30405730
>what even is that fucking rail on the bottom one?
ugly trash
>>30405697
gunbroker?
>>30405743
t r a s h t h e t i c s
>>30405714
>>30405743
Post your meme tier rifle again, I enjoy it. :^
>>30405730
Diamondhead. It deserved a special place in hell.
>>30405519
Here's my AR finally upgraded from 2004
>>30405704
Red crosshair, because it's an ECOS.
The horizontal lines are shoulder width at each 100m mark.
M4 markings go out to 600, and M249 go out to 1000.
>>30405755
it looks like pure garbage, glad you agree
>>30405742
do you still have that ak?
>>30405752
kek
>>30405769
>ECOS.
muh dik
>>30405770
Hey, it fetched two bills when I sold it, someone with equally awful taste thought it was good
>>30405768
Holy fuck....
>>30405788
geezus christ, someone paid 200 for that rail?
sigh
>>30405782
You know what it is already
>>30405768
So you went from 2004 to 2008
>>30405811
>So you went from 2004 to 2008
best comment of the thread so far
litrally looling
>>30405768
>VFG with handstop
L M A O are you the retarded me?
>>30405799
There's a sucker born every minute famalam, it got me a KAC URX so I'm pretty happy about it.
>>30405807
yeah
>>30405811
Mlok wasn't around in 2008 so.
>>30405824
>it got me a KAC URX so I'm pretty happy about it.
and then you realized the tools to properly install that rail were more than the rail itself and you cried
i used to want the KAC rail too, but KAC is pants on head retarded with their installation mechanics. that rail is so stupid. fuck that rail. ugh
>>30405782
Slav guns are like whores if you really want one for the long haul enjoy your shit. but if you get one with the express purpose to play with it and throw it out then they are fine.
I have only enjoyed one slav gun and it was pic related, the only reason I like it was due to the work i put in during the refinish.
>>30405844
>due to the work i put in during the refinish.
>making a whore a housewife
welp.
>>30405844
sounds like you want a new mosin, funny thing i got one for sale :^
>>30405851
Kek
kill all [s]Slavs[/s] edition
>kindergarteners
>shoppers
>coworkers
>moviegoers
>homosexuals
fixed for millennial fudds
>>30405851
ha no I just wanted to do something to pass the time. it was still a shitty chink nugget. I made more than my money back on it though.
hey guys which barrel to get.
BA Hanson .625 22oz or Ba Hanson .750 27oz?
wouldnt the .750 heat up a bit slower?
>>30405839
The tool was 70 bucks, and a tool steel URX nut was 30. D. Wilson makes good shit for those who know aluminum barrel nuts are pants on head retarded.
I'm in it for around 250 since I bought the rail used anyway. No tears from me.
>>30405824
was trying decide between one or the other, already took off the VFG but its an older pic.
>>30405873
what did he mean by this
>>30405519
In
>>30405882
>wouldnt the .750 heat up a bit slower?
Yes added mass is going to make it slower to heat, hence the heavier weight
>>30405863
nah im good nig
>>30405893
the installation methodology is still fucking retarded as fuck. they have some cavemen at KAC designing shit. at least this particular thing. they're stuck in the 80s or something...
>>30405893
urx best
>>30405903
???????no one knows?????
>>30405882
>>30405908
It will also hold the heat longer.
>>30405917
They want their contracted parts to be as hard to service as possible, so no Civs get any good out of their craftsmanship.
A total shame really, they build bulletproof shit.
>>30405918
Delicious ambidextrous controls. If I could only find a local dealer that actually stocks a sr-15, I would buy that shit immediately.
>>30405926
It's a comment on high profile shootings using ar ""style"" firearms.
>mfw there are people on /arg/ without a JP captured buffer
Explain your poorfag/"SPRONG" ways
>>30405941
>They want their contracted parts to be as hard to service as possible
pretty much. they require a KAC armorer to install the rail properly. all the stupid fucking jigs and shit you need to do it are absurd. turned me right off.
>>30405953
all of those shootings are statistically irrelevant. please leave
>>30405955
Is your rifle worth less than this one?
I'm pretty set on Rainier's Billet Ambi lower for my new build.
Any recommendations for a Billet upper to match it, or should I get the upper from them as well in the set?
I can't use MEGA's set as their upper doesn't fit right with anti-rotation handguards.
![DSC_9201[1].jpg](https://i.imgur.com/vmDhpRq.jpg "DSC_9201[1].jpg")
IN
>>30405970
>Gasblock past the rail
Not an argument
>>30405967
I would say you're drunk, but you're underage. I was helping you understand some dude's comment. Not advocating it, dummy.
>>30405970
>50 shades of FDE
>>30405941
U swiss? I had to order mine from tejas
>>30405970
>Green zip ties
C'mon
>>30405979
you should ask mega if they know for sure a geissele (or other anti rotation tab equipped hg) wont work.
also be warned most ambi lowers aren't really ambi when it comes to the bolt latch. like 99% of them are 'drop only' bolt catches. you can't lock the bolt back with the button. it's a release only.
>>30405998
what kind of OPSEC info is on your baseplates
>>30405998
>50 shades of FDE
mfw your magazine dot matrix says what i was gonna reply with
>>30406013
>also be warned most ambi lowers aren't really ambi when it comes to the bolt latch. like 99% of them are 'drop only' bolt catches. you can't lock the bolt back with the button. it's a release only.
I understand that, it's just nice that it's an option; and I like the way that lower works.
People have to file down their handguards to fit MEGA uppers. PLus, I'm not a big fan of their logo anyway.
>>30405962
You really only need a optic mount that will bridge the upper receiver and the rail, the rest is pretty simple to do with a BEV block. They WANT you to buy the "correct" tools, just like an OE car manufacture wants you to buy their special shit to service their components. There is always an innovative workaround.
It's all held together with Loctite 242 or Loctite blue, which can be a motherfucker with heat and age to take apart though.
>>30405955
Lithium Grease
I
t
h
I
u
m
G
r
e
a
s
e
>>30405970
>Exposed gas block
Eww
>>30406032
>Lithium Grease
More like
>Dirt bait
>>30405970
Gee Suchka, how come your gas block gets 4 clamp screws?
>>30406022
get a rainier ultramatch
>>30406022
>PLus, I'm not a big fan of their logo anyway.
fair enough, i definitely don't blame ya if you know rainier will work. what grip panels are you using btw?
>>30406013
I never lock my bolt back when I shoot, so not that big of an issue for me
>>30406032
>There is always an innovative workaround.
generally speaking specialty tools work better. i know about this very much
>>30406046
Things Tactishits believe for $500
>>30406050
Yeah that's the plan. I'm just trying to decide whether I want to buy the set, or the lower and a different upper.
>>30406051
Magpul Type 2 M-LOK Panels.
>don't have the pivot pin tool
>trying to put the spring and detent pin in by hand
>detent pin keeps flying out, and almost lost it twice
Help me /arg/ is there an easier way without the stupid pivot pin tool? I can't wait to put my AR together any longer.
>>30406064
Razor blade you idiot. Hold the pin in with it, then once the pin is through, pull the blade out.
>>30406057
>Things Tactishits believe for $500
And throwing grease inside a tube containing a key operating component is smart.
>Things poorfags justify
>>30406064
buy some battle arms enhanced pins, they are STUPID easy to install. they use a magnet and a shallow starter channel for the detent to ride in at first. you literally just snap them in.
https://youtu.be/vcAqNDwT34w?t=106 time stamped to the part
>>30405988
What are you even saying here?
>>30405998
>2 shades of FDE
>>30406006
Whatever it takes
>>30406033
It's lewd
>>30406049
You know why
>>30405519
For the transformation prompt: Here's the first rifle I built.
>>30406064
Do it in a bag
>>30406058
SET
E
T
>>30406064
razor blade ya fucking idiot
>>30406064
try to put the spring back in a winchester 190 that shit is fucking gay
>>30406077
or dont be an idiot and use normal pins
>>30406081
Here's the evolution of my first rifle, to not be that much different. As. Well as the second rifle I built, which was actually for my female roommate.
>>30405487
posting old and rare pepe
>>30406100
>>30406094
>use normal pins
t4 pls im just offering a solution for him
>>30406056
As do I. The firearms community is much better about homesourced tooling than many other hobbies.
Some tools in some industries are absolutely indisposable.
>>30406075
>it's only worked for the last 60 years
>but what if we could make it SPROING less?
>instant profits
You go ahead and spend money on JP's captured spring, I'll be changing buffer weights in the time it takes you to order another overpriced meme part. :^)
>>30406114
why is it always you
>>30406083
But pb, the set has their logo EVERYWHERE. Left side of the upper, left side of the lower, and right side of the lower. How much Rainier shilling do I need?
>>30406064
>>30406073
Also it's worth mentioning that everyone does dumb shit once in a while. I was taking my buffer tube off and forgot about the retention pin, and while unscrewing it shot out and hit me in the forehead. Pretty painful, not a fun time.
>>30406124
>How much Rainier shilling do I need?
all of it
>>30406100
>>30406081
And then here's my current rifle.
I sold my first rifle for a $200 profit over what I paid for it's parts then turned a rounded and ordered all the parts for my current rifle in a configuration that wasn't quite as retarded as my first iteration. (then the next day some Muslim killed a bunch of gays and that's how I accidentally got ahead of the panic buying of lowers and other bits)
I've got BUIS, Red dot, weapon light, and sling in the mail. Outside of a fee odds and ends like rail covers and that I don't think I'd be in want to add or change anything to this rifle for some time.
>>30406124
>he actually watched his buffer detent shoot him in the face
Did you at least learn anything that day?
>>30406119
ur gonna b mad, i made that gif you just used too. kek
>>30406017
That's classified
>FUCK YOU 4CHAN AND FUCK YOUR "SPAM" FILTER FUCKING SPENT 15 MINUTES TRYING TO GET MY POST THROUGH REEEEEEEEEEEEEEEEEEEEEEEEEEE
>>30406117
kek, crazy tools are necessity when doing 4g63 timing belts. i made my own though.
>>30406141
the robot lady?
>>30406129
It looks like a great set to be honest, but that's a lot of branding. How's the Fortis billet upper?
>>30406136
Never happened again, that's for fucking sure.
>>30406153
yeah
>>30406117
>but what if we could make it SPROING less?
Yeah why dont you just ride a horse around since innovation is a waste
>I'll be changing buffer weights
This is what the standard spring man really believes.
>Take JP spring out of the box
>works on 16" middy, 11.5" carbine, 20" rifle (with plastic spacer dropped in before)
>cycles fine with wolf, tula, federal and imi ammo
Much meme, such issue
>>30406064
As has been said
>Razor Blade you idjit
The method I've used, however, is to press the detent pin down, insert a marker through the takedown pin holes in the lower, then push said marker out from the right with the end of the takedown pin. Shit just slides into place.
>>30406101
my dream rifle desu
>>30406191
Id hate to see your nightmares
Who here /vintagebattlebelt/
>>30406154
Well that's good.
>>30406176
It's like you want to spend $140 for a captured buffer and then buy spring packs on top of that, to eliminate a noise that only an autist would be bothered by.
KYS
Y
S
http://www.jprifles.com/1.4.7.2_os.php
>>30406073
>>30406082
>>30406083
>>30406184
You guys are geniuses. Especially bag guy.
Thank you.
>>30406202
>It's like you want to spend $140
Implying I dont have a couple already
>then buy spring packs on top of that
Did you just ignore the post you responded to?
>>30406208
>all that unnecessary oil
>>30406064
I always use needle nose pliers to hold the pin and to set it a bit in the detent. Once you've got it just a bit in there and it's steady use your other hand to press it down with the pin and push it in.
>>30406191
I was posting it here ~2.5 years ago
>>30406200
>let me try these nightmare vision goggles
>everything's the same
>>30406216
It's grease from his KFC
>>30406064
https://www.youtube.com/watch?v=XJNaTjvQaVQ
>>30406211
>implying a standard carbine h2 buffer wont cycle with particular brands of ammunition
You don't have to justify your purchases here anon. Only your shitposting.
>>30406154
no idea
>>30406161
neat. i found it on pole
>>30406223
You don't bring a bucket of tendies to the range with you?
>>30406246
Sounds like you're justifying not having one.
>>30406250
>neat. i found it on pole
figures, i sent it to my friend to use on 4chan and he goes to pol way too much. mite literally be the one i made
Really tempted to get this just for added
>neat
factor. Hardest bit would be dremmelling off the delta ring assembly because lolP&Wbrake, but that's a breeze with a cutting wheel.
>>30406261
sunflower seeds are goat range snack
>>30406270
neato
>>30406273
>MI
dropped
>>30406279
All you need is some shitty mountain logo to be happy, opinion discarded.
>>30406273
MSD can u not
>>30405519
Nanny state AR progress
>>30406288
I can not not.
>>30406287
i embrace the mountain
>>30406250
I think I'm gonna go with the Rainier lower and Fortis upper.
What do we think about this BCG from AIM? Too gimmicky?
http://www.aimsurplus.com/product.aspx?item=XAIMBCGNIBLW&name=Light+Weight+AIM+AR+.223%2f5.56+NiB+9310+MPI+Bolt+Carrier+Group&groupid=723
>>30406316
>NIB
>Lightweight
Literally why.
>>30406311
nice. should like nice
>>30406293
where at?
>>30406380
maryland
>>30406293
>>30406459
Also Maryland, shit sucks doesn't it? My actual house is in WV too, I'm just residing in MD for the tuition discount.
>>30406470
Yeah, all ARs have to have a barrel profile no less than .750 inches
>>30406488
>all ARs have to have a barrel profile no less than .750 inches
wat
>>30406499
It's what all the gun stores default to because Heavy barrel ARs are legal but they never defined a heavy barrel in the law
>>30406488
I don't see the point of that restriction
>>30405551
real best 5.56 coming through
>>30406488
>>30406499
>>30406509
>>30406516
Not sure where you heard that, but it's wrong. It has to be designated as a heavy barrel by the manufacturer. In Maryland law, Heavy Barrel (or HBAR) is never actually defined, so whatever barrel a manufacturer designates as a Heavy Barrel/HBAR is a Heavy Barrel/HBAR. Has nothing to do with diameter.
Since you are building your rifle from a lower (making you the manufacturer), you can designate any barrel as your HBAR if you feel like playing that game. You just can't sell it to anyone in that form, but if it's for you, you are designating your own firearm as whatever you want to designate it as. This would comply with Maryland's law, because there is no actual definition of HBAR other than being designated as such from the manufacturer (which is now you).
I'm not old enough to manufacture my own (my grandfather "built" mine and then "sold" it to me as a complete rifle), which is why I don't do my own designation and actually have a Heavy Barrel.
>>30406509
this is mind boggling, can you link me to some text about it?
*PHHFFFFFHHFFFFFFFFFFTTTTTTTTTTTTHHHh*
/akg/ sends its regards
>>30406547
You'll never find any definitive information on the subject other than interpretations of the law, because there isn't any definition. That's why the method I said in >>30406546 is completely valid (an FFL told me this method, and they recommended it). Whatever is designated by the manufacturer as an HBAR, is an HBAR in Maryland law. And assembling a rifle from a lower makes you the manufacturer.
Colt AR15's (and any clones) are banned in Maryland, except for Colt AR-15 Sporter HBAR's. Building an AR with a Heavy Barrel/HBAR is enough to define it as a clone/copycat of the non-banned Colt Sporter HBAR, making it legal here. If it didn't have a "HBAR" it would be banned. But there is no actual definition of what HBAR is.
>>30406578
Ayy lmao
>>30406621
man what the cancerous fucking shit-ass
fuck you and your gay state i'm pissed off just hearing this.
>>30406629
what rail on AK tho?
>>30406546
Those rail grips look nice what are they called
>>30405487
But if we kill the Slavs, who will be the slaves when lord trump takes over?
>inb4 niggers and spics
They will all be dead
>>30406698
What safety selector, what upper, and what handguard?
>>30406649
I believe that both the top cover and the hand guards are made by Texas Weapon Systems.
>>30406649
TWS
>>30406711
Not mind sadly. Anon made a parts list, pic related.
Isn't it just fucking sexy?
![20160113_190438[1].jpg](https://i.imgur.com/WqY53YC.jpg "20160113_190438[1].jpg")
>>30406578
AKG can go fuck itself.
Sincerely, ARG
>>30406730
>works works works
all those fucking "works" named companies
>>30406698
what rail is that?
>>30406720
>>30406726
ty, i didn't recognize the dog leg for a sec there. doofus moment.
>mfw bought rifle suppressor yesterday and began my newest six month wait
At least I can have conjugal visits. Even if it is an indoor range.
>>30406782
ANON COME ON PLS
>>30406730
>>30406730
>>30406730
>>30406786
which one?
>>30406797
Dead Air Sandman S. Figured I'd get a 30 cal can to futureproof myself a bit.
Why do some people put their laser sights on top of the rail, while others have it on either side, what's the pros and cons?
>>30406786
>6 month
Nice to see there's still some optimism in the world.
>>30406814
Nice
>>30406847
Putting it on the top gets the beam closer to the top of the barrel, which makes it so you don't have to worry about the Y AND the X axis together when zeroing and shooting.
>>30406874
>>30406918
I see, thank you
>Replies: 201
>posters: 39
Another AR Circlejerk thread
>>30406814
i fucking hate the name of this company.
seriously, who names their company dead air
>>30406542
>you will never own an SG550
>>30406956
great contribution tBH
![2013-04-12_21-46-49_530[1].jpg](https://i.imgur.com/Y7DKoot.jpg "2013-04-12_21-46-49_530[1].jpg")
>>30406956
>38 individual tripfags
>1 anonymous
Youtried.png
>>30406985
You can as long as you have 1600 Burger Bux. Just have to buy the lower receiver separately to go with it.
http://www.shop.jdifirearms.com/550-Conversion-kit-w-o-receiver-SANSG550.htm
What's a good "my first optic" for my first AR? I'd like it to be cheap, doesn't have to be magnified or have any bells and whistles, I just want something that will hold a hood zero and make it easier to shoot than iron sights
>>30407034
PA MDS
>>30407034
love your carbine but ur gay, move that rear sight all the way back. get rid of that stupid shit under your handguard.
geezus christ.
So we're all in agreement that the URX 3/3.1 is the greatest rail ever designed, right?
>>30407066
uh no
>>30407066
Great aesthetics, shit performance
![20160621_204606[1].jpg](https://i.imgur.com/Gv1EteK.jpg "20160621_204606[1].jpg")
>>30407066
Pretty much yeah.
>>30407066
>>30407093
flimsy piece of shit
>>30407134
Break it.
I await your testing results with baited breath.
>>30407037
Thank m8, I'll look into it
>>30407044
The rear sight interferes with my use of the charging handle with it folded down and all the way back, and I like the foregrip and flashlight combo
>>30407163
>baited
>>30407073
>Quadrails
Okay DR8C0
>>30407091
>Shit performance
How?
>>30407093
I'm not sure what's going on here but I don't really like it, except the rail.
>>30407134
I've beat the shit out of mine and it's still working fine.
>>30407177
how's that muzzle device coming along nick
>>30407177
You don't like anything, I'm not surprised.
>>30407173
Hardly.
>>30407037
So I looked at it and on their site it looks a little low, seeing as how I'm coming to the AR world from the SKS and have no experience with optics whatsoever I'm gonna go ahead and ask stupid questions
Can I mount it on my AR as it comes from the store or do I need something to raise it over the front sight post?
>>30405487
What's the /k/onsensus on the best 80% lower one can buy? (mil-spec, forged, top notch metal, etc ...)
Change of rifle from 2012 to 2016.
>Added.
- Surefire E2D
- Surefire Pressure Switch
- IWC Mount
- IWC Handstop
- ACOG TA31
- DBAL-I2
- LaRue Mount
>Replaced
- A2 > AAC Blackout
- Stock CH > BCM GFCH
- Stock Mag Release > Norgon Ambi
- Stock Safety > B.A.D.
- Stock Trigger > Geissele SSA-E
- Glock > HK P30L
- MIAD Small > MIAD Large
Considering a V7 light weight ejection port door, ERGO slimline rail covers (solid type), and replacing the plastic trigger guard with a metal one.
>>30407200
You CAN mount it as-is, but it will be too low. They sell risers for under $20 in your choice of absolute cowitness (will line up directly with iron sights) or lower third cowitness (dot is a bit above but you can still use your sights through the optic).
Or you could spend as much on a QD mount as you did on the PA-MDS, but they come in the same options.
>>30407208
If it's a mil-spec forging they will literally all be the same. There are seriously only 3 forges in the US currently making AR lower blanks, they all use the same specs (metal, finish, etc), and they all use the same machines.
If you want top-notch, get a billet lower. Yes, they make 80% billet lowers. You (can) get a few cool extras that way, like integrated oversized trigger guard or ambi bolt/mag release.
As to "quality", the only thing that you won't be doing yourself that can impact the function of the rifle is an improperly broached magwell, and I've not heard of that being an issue on any of the 80%'s, even the cheapos.
>>30407375
>If you want top-notch, get a billet lower.
Which manufacturer is /k/-approved?
>>30407382
None of them. /k/ hates billet.
>>30407325
>>30407375
>If it's a mil-spec forging they will literally all be the same. There are seriously only 3 forges in the US currently making AR lower blanks
STOP repeating this STUPID fucking bullshit. forgings are not machined and BARELY resemble a completed receiver part.
the final machining process varies between manufacturer to manufacturer so the tolerances will naturally vary. the methodology used to create the magwell void is also a very widely varied area and the methods vary from drilling out the corners and milling out the space to wire edming the whole thing out in one go.
let this fucking meme die.
>>30407365
Think I'll get the riser and the optic then, thanks m8, you've been a big help.
I'll magdump my first magazine out of it tomorrow morning for you
Any other suggestions for my AR? Optics, hand guards, grips, etc?
>>30406306
What's the stronkest M-lok rail out there?
>>30407520
Looks like one of those bands that keeps the bayonet from rattling around
>>30407851
Colt Canada MRR rail.
From
Has anyone used the Sig bravo4? I know k's opinion on aimpoints so does the Sig RD compare?
>>30408129
A few threads ago it was referred to as "chink shit"
>>30408198
That fucking sucks, I could get it for $230 but if it's trash then that's a waste
>>30408206
I know someone on /arg/ has one.
I just saw it referred to in that way, not any actual data suggesting its shit.
Keep in mind, other fairly okay-good optics are made in China too.
>>30407530
not a meme
http://www.ar15.com/forums/t_3_12/318113_AR_Lower_Receiver_FAQ__56k_beware__MMS__CMT__LAR__LMT_compared___.html
whats the best locktite overall for threading on your rifles? somethign thatll hold, but not impossible to get off later?
posting superior rifle in inferior rifle thread
>>30408312
purple or blue
>>30408312
blue
>>30408330
>>30408331
thanks niggs
>>30406306
hey faggot. you out there ?
anyone know where to buy one of those oversized m16 style forward assists for relatively cheap? found a place that had em for 16.99 but wanted 12 bucks shipping.shit better come with a fucking blowjob
morning fags
>>30407530
Do you have any idea what a CNC machine is?
>>30408365
Yes
Going innawoods before a massive thunderstorm.
>>30408572
lucky
>>30408598
>>30408598
I really don't get to do this in Florida at all, Michigans OC is quite based and there's tons of state forrest.
>>30408559
sup rj. whered you get that m16 style forward assit
