>current year
>CZ still uses shitty ass paint in their pistols
>autist neckbeards guzzle it up like hungry cumdumpsters
Quite sad the turkshits are putting out better clones than CZ, I don't know how you delusional faggots convince yourself these piles of pot metal shit are worth more than 300. This shit is just unacceptable.
>>30332890
do you even own a CZ ?
>>30332910
I used to own a couple like 8 years ago. Machining and finish were shit then, and I just handled another CZ that is current production. Same shit, these guns aren't worth what they charge.
>inb4 but dey werk jus fine
>>30332910
He probably has never touched a gun before and just regurgitates shit that was posted in some corner of an internet forum
Because people on the internet could never be wrong
>>30332943
>>30332937
>MUH MACHINE MARKS
>>30332890
I bought a polished steel one and avoided the problem all together OP
>>30332956
Speaks a lot about a company when they are taking every cost cutting measure available. Even Glocks can produce perfectly milled parts. What the fuck is CZs excuse?
>>30332961
Fair point. However turkshits are still making great clones with finishes that are light years ahead of CZs spray paint.
>>30332979
ill bite, what cz guns have you had?
>>30332890
That is one low quality bait, so I am doing this against my better judgement. Black polymer finish might not be pretty, but is one tough finish. I have put my SP-01 Shadow through hell and shot about 25,000 rounds through it - and only marks of use in finish are few minor scrapes.
Did somebody put that one into sand blaster, drop some corrosive substance on it or carry it in a metal holster?
>>30333008
The 9mm and the 40 cal.
>>30333008
P01 and a 75
>>30333011
Sure you do.
>>30333055
>>30333048
i havent had any experience with any cz guns yet, im looking to buy the rami though
>>30333055
and those cz's were unreliable?
>>30333081
They functioned fine but that isn't the point of this thread m80. Charging how much they do for half finished products speaks to their business model.
>>30333055
>a 75
which one ?
>>30332937
>>30333081
Topkek!
>>30333107
Carrying about the prettiness of a weapon when its a tool that will get used and abused regardless
do you baby your weapons?
>>30333108
Bd
>>30333122
Absolutely not, but I expect a finished product, not finished with spray paint quality paint.
>>30333107
half finished? How is it half finished?
>>30333131
>shit machining
>shit paint
Glock does better.
>>30333136
so buy glocks then?
What's the problem?
>>30333142
I do.
>the problem
As stated multiple times, shit machining shit finish, CZ cuts corners and people can't accept it
>>30333149
You are the only one getting pissy about it, most people just accept it and buy something else...
>>30333149
How do people not accept it? It's a $450-500 handgat, anyone who thinks they're buying a MK23 are idiots.
The gun shoots and mostly chugs along.
Just like how glocks are the simple box guns that works well at $500.
I mean, you're not going to be praising glocks for how well their plastic frame is made vs. an HK, are you?
So with non-pretty internal machining that doesn't affect the gun function and polycoat, what's the problem of a $500 gun?
I think it's time to start posting best handgat
>>30333212
>>30333220
the guns have a short as fuck service life and the slide release cracks in half
the frames are shit
coating is made of slavaboo hopes and dreams
the guns are shit, if you actually want one for the novelty get one that isnt made by the czechs
>>30333275
agreed
>>30333275
>>30333430
Ooo! Me too; me too!
The CZ have shit finish meme isn't a meme.
I've seen new guns in gun stores with shitty incomplete finishes, and obvious mess ups that shouldn't have ever passed QC.
The worst part is that I really want a CZ but I really can't justify the ~$700 price tag when the fucking finish of all things leads me to question their QC department.
I'll prob just wait and buy a used beater when I find one at the right price.
>>30332890
>Czechnology
for those who can't into real technology.
>>30333055
>Sure you do.
Trigger reset adjustment screw and rear sight screws needed blue locktite already early on - probably after less than 2,000 or 3,000 rounds. I have replaced slide release four times by now. Mag springs have been replaced only once but seem to be working ok. Foresight fiber optic broke off after about 7,000 - 8,000 rounds the first time and second time after about 10,000. Since I was not able to find the fiber after it got broke loose the 2nd time I had to replace the foresight. The scrapes I mentioned are on the other side of gun, but since they are mostly located on top of serial number(s), I have no interest posting picture of them online. If you have experience about these pistols like you claim, you may have noticed some machining marks on outer surface of barrel - this one used to have them as well, but the surface on which were have been smooth as glass for the last couple of years....
>>30333212
I'm not pissy, I just think it's totally inexcusable.
>>30333220
I never talked about function m80. I'm talking about finish, the Turks can shit out guns half the cost with perfect milling and finish so what's CZs excuse?
>>30333568
That's probably the best option, literally every CZ I've owned has had shit machining on the internals including the Magwell and especially in the mag release area. There is no excuse for this when guns half the cost do it right.
>>30333689
That gun doesn't have 25k stop lying faggot.
>I have no interest of posting them online
So stop lying.
>>30333689
post barrel interior
>>30333281
I'm guessing these all these things happened to you personally?
>>30333689
you german by any chance ?
>>30333737
>>30333689
nevermind, read your post too late
>>30333725
Then buy Turk clones. I don't get why you're so mad about other people enjoying their guns.
>CZfags literally have no excuse for this shit
>their argument resorts to it just werks!
>>30333568
>$700
What?
>>30333753
Don't project friend. Why would I be mad when I can do as you say? Did you even think before you posted?
>>30333568
>~$700
where the fuck are you looking? a new 75 can be had for like $500-$550
>>30333760
Topkek, people pay 500-600 for this trash
>>30333799
I've seen hipoints finished better that this. CZ confirmed for eurotrash hipoints.
>>30333799
what's the problem here officer ?
>>30333813
Apart from your eyes , that spray paint tier finish
>>30333775
I'm not the one crying about a gun I don't like.
>>30333689
I almost got a CZ SP-01 Shadow. I'm kind of glad I didn't.
>>30333764
>>30333793
Well shit my lgs which usually has great prices has shit prices on CZ
Still I'd rather spend around $400
>>30333813
I guess you just must be used to seeing shitty guns.
>>30333835
You're crying about someone else shitting on it, even worse lad.
>>30333842
>literally everything breaking on the gun
>is gud guise I swer
>>30333849
They cost over $1000 retail in Canada. I think I dodged a huge bullet.
>>30333870
You dodged a missile.
>>30333870
you dodged a missle so big half the competition world uses them in certain divisions
>Its a shit on CZ episode
They are really the only metal framed 9mm handguns worth buying
>not having all-chromed firearms
>2016
Shiggitydiggitydoo
>>30332890
>posts an obvious surplus gun
>complains about finish
WEWLAD
E
W
L
A
D
>>30332890
>posting Israeli surplus to bitch about finish quality
That's disingenuous as fuck.
>>30332890
nice bait faggot
https://www.reddit.com/r/guns/comments/38z4ge/aim_cz75_xgrade_aka_dont_use_brake_cleaner_as_a/
Fucking kill yourself
>>30333726
There would not be much to see in there. The barrel has no real corrosion and edges of rifling are still sharp, but that might at least partially because I am quite anal retentive about maintaining my funs (habit I picked up from military service). Bottom corners of rifling have always been bit rough, so removing copper is necessary every now and then and nowadays I have to use brass brush to get most of junk away from there after shooting.
Grand majority of ammo that I have shoot is Sellier & Bellot bulk that comes in boxes of 2,000 rounds (containing 8 boxes of 250 rounds). Early on I also shot Magtech 9B. So the ammo used has not been high quality either.
The pistol is about seven years old and seems to have developed a bit of play in between slide and frame over the years. Hence accuracy does not seem to be quite as good as it once used to be.
>>30334022
for fucks sake
what's with the sp01 shadow
>>30333799
What ever was done to that pistol, it apparently was not shot that much. Mine have not had any trace of finish on those lugs on both side of trigger spring for a very long time.
It also seems to be missing the gray finish that mine has inside dust cover and quality of work seems much more shoddy. It seems you got a lemon.
>>30334022
Ok - that explains it. OP - you are officially a faggot and a liar.
I bought babbys first pistol (P-07).
I'm not fucked am I?
sup /k/
I'm interested in the cz75 platform, but am at a loss over which version of the pistol to buy. I like the decocker on the BD, but does it look the same as the B? whats different about the ambidextrous stuff on the 85?
pic not related.
>>30333889
>le competition
>implying they don't spend more on more than the gun is worth
>>30333951
>>30334014
So go to a gun store and hold one >>30334202
>CZs r gud u just got a lemon
No that's unfinished, many CZs come like that.
>>30334231
You're retarded friend you can find many other examples of equally shitty CZs.
>>30334537
You should be ok as long as you don't use brake cleaner for cleaning the pistol as in the above photos posted by OP.
>>30335096
>implying you know anything about competition
>>30333889
>competition meme
Lol because they have a team they are top dogs? Look at what's shot in the ISSF, CZ is irrelevant.
>>30335158
>implying you do
Lawl
>>30335130
And there are tons of other examples showing how CZ is shit, not my fault your butthurt over a picture, God forbid you actually look up anymore you might have a heart attack.
>>30335171
>ISSF
>mentioning ISSF in a CZ thread
you must be a special kind of daft
>>30335171
issf lol
look at the retard
>>30335216
ISSF is one of the biggest shooting competitions and even in IDPA there are very few because there are much better options glock being one.
>>30335216
>>30335229
ass shredded samefag
http://www.idpa.com/blog/post/2012/04/20/glock-and-sw-make-up-67-of-idpa-world-shoot-guns.aspx
>>30335262
ah now i get it
you're the IDPA idiot from the last couple CZ threads
>>30335280
>muh competitions!!!!
>provide sauce for most popular competitions
>dat deflection
I accept your defeat poorfag.
>>30335287
>IDPA the most popular competition
you must live under a rock
>>30335301
>most popular competitions
>competitions being plural
Confirmed for dumb CZ
>>30335301
IDPA is one of the more popular competitions. CZfag is buttblasted his argument isn't panning out.
>>30334050
>(habit I picked up from military service)
Ok.
>>30332979
Except glocks parts are injection molded you fucking tard
They used the same cost cutting measures
This is why /k/ is dead and the mods need to do their jobs
>inb4 calling me a CZ fanboy
I don't like CZs because of the grip shape, but you're just obnoxious
>>30333873
keep in mind glocks go for 1000 in Canada. Handgun market in Canada is tiny so everything is expensive.
so...should i still get a cz rami?
>>30335096
Anon, I've never been one to compliment CZ's finish. I personally think paint on a firearm is an abomination but you're being seriously intellectually dishonest by implying the CZ in the OP is a special case. The Israelis take sub-NYPD poor care of their handguns
Pic related, another X-grade Israeli PD trade in.
>>30339492
and another.
It's almost like budget steel framed handguns don't hold up to being shipped half across the world in burlap sacks.
I'll admit, the FEG fared slightly better. A testament to the awfulness of paint as a finish
>>30339538
Looks like 915s are allergic to jew sweat as well.
>>30339568
>>30339584
jesus christ israel what's your fucking problem?
Look at this horrorshow
>>30336021
Yeah the small internals not the slide you dumb faggot.
>>30336271
Understandable, bring Canada and all.
>>30339492
>he thinks I implied that was a special case
lolno
>>30339309
ask if you should get a glock in a glock is shit thread
>>30339309
No, better and lighter guns out there.
>>30339309
Have you held one? do you like it? That's more important then hot memes flung on a Turkmenistani sand animation BBS
>>30339662
yeah i plan on taking a look at a few and feeling them up tomorrow
>>30339866
While you're there look at the single stack Glocks, s&w shield, HK p2000sk.
>>30339882
I like the shields, though I don't own one.
Though I own a stainless cz-75b and love it to death. I have had no issues with it since I bought it.
>>30341666
i swear im not satan
pls respond
