Why are all of the best guns basically CZ75s?
>>30246247
My Sig isn't much like a CZ..so your logic is flawed.
i have a 75B and it's pretty fucking amazing. I love the feel of an all metal gun.
>>30246351
forgot a pic
>want a CZ75 short rail
>trapped in Cuckifornia
>all the ones currently in state are raped to high hell
Absence of God.
>>30246253
anyone have the rusty Sig spring picture?
>>30246351
all metal is best
gun still effective weapon when unloaded
oh look its this thread again
pffft i would take a b92fs any day over a cz
>>30246247
Dont overhype this gun or people will start disliking it
Including me
>>30246436
ikr, cz is the most overrated gun i think ive ever seen. i would almost rather have a highpoint 9mm carbine.
>>30246247
You mean Browning Hi-Power, right?
>>30246518
no i mean highpoint 9mm carbine
>>30246247
The slide lock is way too out of reach.
I give it a slightly better rating than a HiPoint, 4/10. Would shoot again only if it was free.
>>30246526
i suppose it is hi-point, just looked.
>>30246564
i had one for a while, it is an abismal weapon. inacurate, only a 9 round mag in the grip pretty much unmodifiable.
>>30209153
>>30209153
>>30209153
is the true CZ thread
>>30246247
Because "Superior race"
>>30246421
>Slide mounted safety
Okay bud you enjoy that garbage outdated design now :^)
>>30249261
why irish spring soap?
>>30249261
Not OP but Alleghany Gun Works will convert a safetyless Beretta 92D to a thumb-safety SAO model, a la 1911
Expensive, but the end result looks really nice
>the best guns
Best be joking.
>>30247073
Where did you get those grips?
>>30249400
This is the original pattern used in 90's
These came from the manufacturer, which supplied the CZUB in 80/90's (They lay under the counter, for a really long time)
If you want something almost identical.:
http://www.klinsky.cz/stranky/101.php#10170
>>30249278
It's good shit man
>>30249298
Yeah but how much would that cost and in the end does it change the fact that it's still a bad design
>>30249357
Lolther, nigger you must be joking.
>>30249357
hi-point duh
>>30246247
because nobody respects commie "secret" patents
>>30249961
Nofuns fag here whats wrong with walther?
something is wrong with my CZs guys
can't figure out what
>>30250895
Nothing. Fags like to shit on things they don't own
>>30250999
You /k/unt ! :3
>>30251597
not sure how, but that one is fucked too
why does that shit always happen ?
>>30250999
How is the slide fit from the pre-b to the short slide and would a kadet kit fit on the short slide frame?
>>30251734
Probably use of low quality material. It is generally known facts, that CZUB uses uses alloys from batches with different shrinkage, sometimes.
>>30252004
perfect
all the CZs with the small frame match each other
the only thing they changed from the pre-B to the B and SP01 frames is the width of the ejector
if you shave/file off 0.5mm off the ejector side all the old slides fit on the new frames as well
>>30252010
is this bait or are you just stupid ?
>>30252004
>nd would a kadet kit fit on the short slide frame?
of that i'm not sure because the Kadet uses the small notches to accomplish a good slide/frame fit
however I'd say yeah probably it would fit
haven't found a cheap Kadet kit yet and I'm not paying 500€ for a new one
>>30252049
Dude, I know a guy who came on the range with 75B and fter 253 rouds in a row, walked away with compact... Shrinkage dude, shrinkage !
Nice bicolor TS, at least you can use it as nice compensator.
>>30252049
Paid for this short slide today, hopefully it will arrive soon. Info on compatability with later cz parts is really obscure.
Do later cz mags fit?
>>30252149
that's not a TS
>>30252170
mine do funnily
BUT they seem oversized and need a stern push to slide in
magdrop is impossible though
i've been thinking about shrinking one new mag in a vice and have a looksy if i can get it to drop freely
>>30252170
have a pic
>>30246253
If you owned an actual SIG rather than the overhyped NAVY SEALS super soaker gun it would be pretty close.
>>30252302
this desu senpai
I'd hesitate to call anything a "best gun" but if I did it would be the P210.
>>30246388
>tfw CA citizen station in free MS.
I can buy whatever I want for dirt cheap prices, and if I don't like it, sell it back in the home state for more than I paid for it.
>>30252170
are you german?
>>30246388
>being able to find a short rail at all
You do know people spend years looking for them. If you see one, you better buy it now
>>30252004
>>30252004
>would a kadet kit fit on the short slide frame
>Pre-B model 75s may or may not function with the Kadet due to differing magwell dimensions.
http://cz-usa.com/product/cz-75-kadet-adapter-ii-22-lr-adj-sights-10-rd-mags-will-fit-omega-system/
On top of that, the kit will only be connected to the frame via the slide stop, since the receiver is designed to attach to the foremost end of the full-length frame rails. You'd probably have a lot of play in the fit, since the the actual barrel is only going to be loosely connected to the frame via the guide rod and ejector, really. It's hard to say how reliable or accurate it would be.
I don't know if they ever made a pre-b Kadet kit.
>>30252513
Norwegian actually
>>30252596
>the actual barrel
i mean slide
>>30252617
lucky, I hate you all
I just want one shortrail
JUST ONE
So I'm torn between the 75BD and the 85 Combat. Would be a range toy primarily and over time have some CGW parts/service done to it. Any reccomendations?
Very sad that the 75 compact (steel frame) seems to be sold out everywhere online.
>>30252170
>will other cz mags fit?
I actually made a video on CZ-75B magazine compatibility with the short rails and pre-Bs and was planning on adding it to my CZ video but then forgot, because it was in another folder.
But in short, the answer is "maybe"
I have a 1991 dated pre-b that will take MecGar mags, CZ-75 OEM mags, and, of course, pre-b magazines.
However, my CZ-75 from 1985 will take MecGar magazines, but not OEM CZ-75B magazines
The short rail in rough condition I have will take MecGar magazines, CZ-75B magazines, and of course pre-B magazines
The short rail in good condition I have will only take pre-B magazines and nothing else.
There's no real way to know till you get it in and try.
>>30252302
>>30252423
NEITHER of you own one, so shut the fuck up.
>>30252729
>that Waffen Frankonia Wurzburg mark
Hey; they sold mine too!
What does B mean in 75B
>>30252783
Blockadefiringpin
>>30252783
Firing pin "block."
>>30252596
Oooh, i didnt realise that the kit attatched to the end of the full length rails. I'll scrap the kadet plan and buy a used walther gsp or something instead. Thanks!
>>30252751
I am sorry you own a pistol from a fake brand marketed to mall ninjas.
>>30252825
That's not a Sig P210, sempai.
>>30252751
negative senpai
>>30252852
I take that back.
>>30252778
yeah I didn't actually know what the mark was
>>30252713
Get the 85, decocker ones are supposed to be harder to work on or more of a pain in the ass I think.
>>30252556
I paid ~350 dollars for mine and there are 3 more for sale where i live too. The short slide is just " a old used 9mm" here in norway.
Actually getting the permit to own one is hard and tiresome here though.
Judging from pictures Its a early 1977.
The hype is real
>>30252988
Good to know, save money down the road. The 85 combat I'm guessing can accept most sight replacements unlike a bomar on a 1911
>>30253300
can you send one to the U.S. plzz
>>30252852
I'm envious.
>>30246564
Own one, this is very true for me; I have to either reach my thumb all the way around and then find my grip again or, much more commonly, with my left hand. It also is almost impossible to push the lever down if operating one-handed, like it's hanging up a little on the lock
>>30254261
>>30246564
>manlets