QTDDTOT AR15 ed.
Images are sometimes not shown due to bandwidth/network limitations. Refreshing the page usually helps.
You are currently reading a thread in /k/ - Weapons
You are currently reading a thread in /k/ - Weapons
what kind of quality would bushmaster be considered? im looking at their 16" heavy barrel dissapator for a m16a1 model 605 variant build im starting are there other barrels that are the same as this one but better quality?
GUYS, GUYS
HOLY SHIT U GUYZ!
I HAZ SERRIUS QUESTION!!!!
WHATS A BARREL SHROUD??
I smell sage....
In all fields.
Burn this thread to the ground if you have even a shred of decency left.
>>27792998
It's good, I have several Bushmaster uppers and they've never let me down.
dumb question here:
Is it possible to build an AR that can be easily converted from 5.56 to 9mm?
>>27793409
Not that I know of. You're talking about a different lower, a different bolt face, a different barrel....
>>27793409
>>27793429
Just get a 9mm magazine block...
Best cheap upper w/ barrel to buy? I'm seeing bushmaster ones for like $350, but are there any cheaper?
>>27793467
You need a different barrel and bolt assembly still.
For the amount of things needed to be swapped out, it's less hassle to just have 2 guns.
Could I install a Ris ii rail on my 14.5 pinned upper, granted I shave the fsb? Note : Putting this installed barrel on a different upper.
>>27794409
Basically asking can I remove the gas tube from the old upper without removing the fsb.
>>27794258
For the performance of 9mm from a carbine length barrel, you're better off shooting 223 and saving 9mm for your pistol.
>>27794165
Daytona tactical
