Is it difficult to cut nice smooth curves from MDF?

Thread replies: 10
Thread images: 2

Anonymous
2016-02-01 21:06:35 Post No. 939753
[Report] Image search: [Google]

File: lrg_1456-ucurv.-upaint-curved-counter-2.jpg (20 KB, 800x464) Image search: [Google]

Anonymous 2016-02-01 21:06:35 Post No. 939753 [Report]

Is it difficult to cut nice smooth curves from MDF?

>>

Anonymous 2016-02-01 21:07:05 Post No.939755
[Report]

Anonymous 2016-02-01 21:07:05 Post No.939755 [Report]

>>939753
Using hand tools that should say. I have no particular machinery.

>>

Anonymous 2016-02-01 21:17:16 Post No.939766
[Report]

Anonymous 2016-02-01 21:17:16 Post No.939766 [Report]

>>939755
a little, just sand it down well and you shouldn't have any problems.

>>

Anonymous 2016-02-01 21:27:02 Post No.939775
[Report]

Anonymous 2016-02-01 21:27:02 Post No.939775 [Report]

>>939766
Jigsaw do ok though?

>>

Anonymous 2016-02-01 21:32:31 Post No.939777
[Report]

Anonymous 2016-02-01 21:32:31 Post No.939777 [Report]

yeah. practice on shit stock though, use a fine tooth blade for visible cuts

>>

Anonymous 2016-02-01 21:58:37 Post No.939799
[Report] Image search: [Google]

Anonymous 2016-02-01 21:58:37 Post No.939799 [Report]

File: Neatform-Neatflex-2.jpg (74 KB, 1600x400) Image search: [Google]

You can buy this, if I understand what you want.

>>

Anonymous 2016-02-01 21:59:59 Post No.939801
[Report]

Anonymous 2016-02-01 21:59:59 Post No.939801 [Report]

Router with a compass jig

>>

Anonymous 2016-02-01 22:00:15 Post No.939802
[Report]

Anonymous 2016-02-01 22:00:15 Post No.939802 [Report]

Or is it the counter top you're after? You can do it with a jigsaw and sand out any vague wobbly bits.

>>

Anonymous 2016-02-01 22:06:04 Post No.939804
[Report]

Anonymous 2016-02-01 22:06:04 Post No.939804 [Report]

Remember wear a mask and glasses when working with mdf.

>>

Anonymous 2016-02-02 03:26:08 Post No.939974
[Report]

Anonymous 2016-02-02 03:26:08 Post No.939974 [Report]

>>939753
It will tear easily if you are using low quality or dull tools.

>>939775
Sure, if you use a very high TPI blade and go slow.