Plz Halp
You are currently reading a thread in /diy/ - Do It yourself
Please help me
So i was give these two forearmed sized speakers. A left and a right. Each has two cables coming out.
I want to know how i can wire or tinker them into one aux cord to play music from my phone. I dont know if they need a power source (they most likely do)
>>930846
The speakers need amplified to work
You could build a small amp for it easily enough
As the other anon said, you need an operational amplifier, a protoboard, a potenciometer, some resistors and capacitos.search it in google, it is not hard to do, you only need time.
Buy a PAM8403 board and put it inside one speaker. They run off 5v and put out a lot of juice.
I just completed a little project like this yesterday. I used a $10 Bluetooth receiver for the input.
This is the board that I put inside one speaker.
Just so you know you can actually use them raw on your phone but it would be quite af with no bass.