STM32F411 ADC DMA

Thread replies: 5
Thread images: 1

Anonymous
STM32F411 ADC DMA 2016-01-11 02:56:07 Post No. 928270
[Report] Image search: [Google]

File: nucleo-f411re-zestaw-startowy-z-mikrokontrolerem-z-rodziny-stm32-stm32f411.jpg (46 KB, 800x800) Image search: [Google]

46 KB, 800x800

STM32F411 ADC DMA Anonymous 2016-01-11 02:56:07 Post No. 928270 [Report]

Hi guys, Im trying to configure my uC to measure the voltage on the PC0 pin, but nothing seems to work. This is my current code:

volatile uint32_t uhADC1ConvertedValue;

uint32_t getADCVal(){
return uhADC1ConvertedValue;
}

void ADC2_Init(){
ADC_InitTypeDef ADC_InitStructure;
ADC_CommonInitTypeDef ADC_CommonInitStructure;
DMA_InitTypeDef DMA_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;

uhADC1ConvertedValue = 1;

RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA2, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);

DMA_InitStructure.DMA_Channel = DMA_Channel_0;
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&(ADC1->DR);
DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)&uhADC1ConvertedValue;
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralToMemory;
DMA_InitStructure.DMA_BufferSize = 1;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Disable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_HalfFull;
DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_Init(DMA2_Stream0, &DMA_InitStructure);
DMA_Cmd(DMA2_Stream0, ENABLE);

>>

Anonymous 2016-01-11 02:56:37 Post No.928271
[Report]

Anonymous 2016-01-11 02:56:37 Post No.928271 [Report]

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
GPIO_Init(GPIOC, &GPIO_InitStructure);

ADC_CommonInitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_CommonInitStructure.ADC_Prescaler = ADC_Prescaler_Div2;
ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
ADC_CommonInitStructure.ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles;
ADC_CommonInit(&ADC_CommonInitStructure);

ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
ADC_InitStructure.ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfConversion = 1;
ADC_Init(ADC1, &ADC_InitStructure);

ADC_RegularChannelConfig(ADC1, ADC_Channel_10, 1, ADC_SampleTime_56Cycles);

ADC_DMARequestAfterLastTransferCmd(ADC1, ENABLE);

ADC_DMACmd(ADC1, ENABLE);

ADC_Cmd(ADC1, ENABLE);

ADC_EOCOnEachRegularChannelCmd(ADC1, ENABLE);
}

>>

Anonymous 2016-01-11 02:57:42 Post No.928272
[Report]

Anonymous 2016-01-11 02:57:42 Post No.928272 [Report]

int main(void)
{
uint32_t rev;
int bb= 0;
uC_Init();

rev = getADCVal(); //enc28j60getrev();

for(;;){
rev = getADCVal();
bb++;
}

simple_server();

return rev;
}

I check the value of rev in the debugger, but its always 0:( what is wrong with my program?

>>

Anonymous 2016-01-11 03:05:03 Post No.928275
[Report]

Anonymous 2016-01-11 03:05:03 Post No.928275 [Report]

well, the value is always 1, actually, but thats because i assign that value in the ADC2_Init function.

>>

Anonymous 2016-01-12 01:21:37 Post No.928797
[Report]

Anonymous 2016-01-12 01:21:37 Post No.928797 [Report]

>>928270

try analog.read()