Gate Latch

Thread replies: 5
Thread images: 3

Anonymous
Gate Latch 2016-01-06 18:26:31Post No. 925958
[Report] Image search: [Google] [Yandex] [Bing]

File: Gate1.jpg (2MB, 3264x2448px) Image search: [Google] [Yandex] [Bing]

Gate Latch Anonymous 2016-01-06 18:26:31 Post No. 925958 [Report]

So, my gate latch popped off. It's attached with these 4 bolts/screws. I have a power drill with a bunch of bits but none that seem to work. The bolts have this circular hole in the middle that extends most of the way through the center of the bolt and nothing is fitting in.

I also tried banging it in with a rubber mallet to no avail. Any ideas what type of bolt this is and what bit I would need for it?

I have two more pics incoming.

>>

Anonymous 2016-01-06 18:27:18 Post No.925960
[Report] Image search: [Google] [Yandex] [Bing]

Anonymous 2016-01-06 18:27:18 Post No.925960 [Report]

File: Gate2.jpg (1MB, 3264x2448px) Image search: [Google] [Yandex] [Bing]

1MB, 3264x2448px

>>925958

>>

Anonymous 2016-01-06 18:28:48 Post No.925962
[Report] Image search: [Google] [Yandex] [Bing]

Anonymous 2016-01-06 18:28:48 Post No.925962 [Report]

File: Gate3.jpg (1MB, 3264x2448px) Image search: [Google] [Yandex] [Bing]

1MB, 3264x2448px

>>925960

>>

Anonymous 2016-01-06 18:29:07 Post No.925963
[Report]

Anonymous 2016-01-06 18:29:07 Post No.925963 [Report]

>>925958
they're not bolts, they're rivets. drill them out and find bolts & nuts to fasten them into place

>>

Anonymous 2016-01-06 18:34:03 Post No.925967
[Report]

Anonymous 2016-01-06 18:34:03 Post No.925967 [Report]

>>925963

Thanks. I found a manual rivet gun on Amazon for $10 that I'll try out. If that doesn't work I'll just drill in some screws.