I have a collection of drum sticks that I want to make a "frame"
You are currently reading a thread in /diy/ - Do It yourself
I have a collection of drum sticks that I want to make a "frame" for. I want to to make a circular shape with sticks pointing outward, problem is I don't know how to make the sticks stay in place without anything visibily doing so. Any ideas? Pic not related
>>1015996
Drill a small hole in to the bottom of each stick. Place the stick vertical on a flat piece of wood. Use a screw to go from the bottom of the wood, through the flat surface, and in to the bottom of the drum stick.
That could work, thanks
>>1015996
Drill bit the size of each stick, drill in enough so that each stick fits snug. You'll probably only need 3 bits at most. Use epoxy in the hole to hold them in place.
>>1015996
get a four inch thick round of a soft wood. drill concentric holes in the round, at a slight angle so that the drumsticks fit in and angle outwards.
>>1016573
ohhhh, i was thinking of something that would sit horizontally.