Hey /b/
What do you think of my weld?
I did another one
rubbish
>>677596469
jesus fuck, why have you tacked and grinded your tacks so many times?
>>677596469
This is why I don't use ships or airplanes.
moar pls
>>677596469
Damn, negro. you need serious practice.
>>677596723
Because they weren't as good
Op is a shitty welder..
Certified welder here, not bad. To improve, pull the trigger so you have longer stickout (about 6") and guide the wire with your hand. Don't worry about using gloves, they're clunky and get in the way. I find bare hands is the best.
>>677596469
>>677596580
>>677596831
as a journeyman welder here i say...
kill yourself now
>>677596861
Thanks for good advice anon!
>>677596831
>as good
this is now a weld scat thread
dude...seriously.... how hard is it to melt metal into metal fusing the two together... stop being a pussy, heat is your friend.
>>677596861
>bare hands is the best.
But wear fucking sunscreen
This is literally giving me a myocardial infarction just looking at these.
>>677596469
I bet this post is triggering a lot more people than you think
>>677596469
Shitty fucking weld. You went to quick /b/ro. Use more time on the next one to make it stronger and nicer
>>677596469
Nice weld OP. pay no attention to the negative nancies casting aspirations upon your weld.
Here's the weld I did the other day.
>>677596469
You're literary world worst welder.
I went slower on this one, why do i get little holes?
>>677597361
>excellent weld
>excellent
No.
- Wouldn't let OP weld again.
>>677596469
Looks very professional
This thread
I made this cool looking ball
>>677597242
It actually made me laugh. It reminded me of that time I attempted to weld. It was a learning experience, in that I learned I needed to stick with being a machinist, and leave the welding to the welders..
>>677596469
Thats gonna have all sorts of cracks and bubbles in it. Unsafe. 0/10
>>677596469
I think that's very poorly done and will come flying off first water bottle you swing your little sword at with your flabby arms.
>>677597605
>>677596469
You could've done a better job using jet fuel.
>>677597746
Just looked at second pic. It's not a sword. You're not a sad Faggot. But you are a poor welder...
>>677596469
>>677596580
>>677596831
>>677597089
YOU SUCK A GIRLS COCK
>>677596469
fucking shit
>>677597922
Fucking Faggot cant even flip yo image
>>677597089
Sorry, I realised not OP.
>>677598100
>Saying Sorry on 4chan
>>677596469
i shit better weld than that son.
>>677596469
Stick to Lego's.
>>677598211
You Should get that checked out
>>677596469
It fucking sucks dude. Git gud
>>677598211
Dubs speaks truth
>>677596469
what do you think of my welds op
>>677598406
Nice cock 9/10 would suck
>>677596469
what the fuck man
>>677598406
There worse then OPs KYS
>>677598263
kek
>>677598555
Checked
>>677598555
Checked
>>677598406
tig master race reporting in
>>677596469
this is disgusting
>>677597436
>>677597361
>>677597089
>>677596831
>>677596580
>>677596469
Every single one was great my special snowflake, really good job. I sincereley mean that
>>677598555
checked
>>677596861
Sorry if this is dumb, but what type of welding would this be. I assumed Arc but. I starting to focus my education on welding but only have about 20 hours behind a machine.
>>677598435
>>677598491
so edgy
>>677598816
yeah its a little dumb all welding makes a arc
>>677598922
Not this kind, faggot :)
>>677598825
>>677598651
>>677598406
>>677598651
Starting school in a few weeks and focusing on tig
And tips?
>>677599091
dont drink coffee
i drink way too much and it gives me the shakes
>>677598922
Are you serious?
>>677599042
Timestamps, motherfuckers, do you speak it?!
>>677599196
Are you?
>>677599225
You dont understand what an arch is do you
>>677599225
No, that's a bend
L2Weld fag
>>677599309
>>677599330
>not getting the joke.
>>677599042
>>677599225
thats called a flame kiddo
arc is made by electricity
>>677598835
I don't give a fuck about welding but this gave me a half chub
>>677597436
The holes are when you break the arc.
1. Go buy a proper auto adjusting mask, most of your welds look like the problem is they are being done blind, not the weld settings.
2. Stop trying to tag weld it up, it's easier IF YOU CAN SEE WHAT YOUR DOING(see 1) to make a continuous weld than it it is spot weld.
3. Apply the rod before or after the welding tip, into the weld pool and not directly into it.
I used to weld like you do OP until I bought a descent welding mask, fuck all point trying to do what people tell you to do, if you can't see while making the weld.
Op Crescent Moon not lines. Makes a stronger bond
>>677599042
That looks like a cutting torch.
>>677598835
>> 677599718 # itsc called torch welding....
>>677598835
>>677599439
>>677599330
>>677599309
>being this autistic
>>677596469
>>677596580
My God. You guys are all retarded.
https://www.youtube.com/watch?v=5JbnDXw-0pM
>>677596469
u need more heat and wire or seen from the other end: u weld to fast.
steel can handle much more heat and without it u get the stumbling spots in your pic.
and adjust your mask - you need to see the puddle. look up the welding tips videos from Jody Collier on youtube - he knows what to do and can show it to u.
>>677598406
It's too thin, it's not gonna hold
You're probably holding the Mig-nozzle wrong
>>677600636
Stop being a stupid fucking retard, thats not actually even a weld. OP just triggerin vocational school retards.
Dude i mean this sincerely, i am 15 and even i did a better one
>>677598406
looks like it could be wider
>>677600997
Underage b@
>>677600830
>vocational school
lol the way you trigger them, is hire them to work in a real shop, then gradually show them day by day that their instructors and textbooks were full of shit. Twice the RPM, and triple the feed! They're just so enthusiastic, and will keep quoting you formulas and shit for a long time.
This hurts on a whole new level regards welderman