Retro edition
Old thread
>>27787873
about as retro as I'll go.
>>27792816
WHERE IS MY 80% LOWER
REEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
>>27792825
Excellent contribution.
>>27792837
gay
>M16A4 counts as retro now
>>27792842
My phone was factory reset and i lost all the pics on it ;_;
retro A shit
>>27792845
UR GAY! ;_;
![WP_20151104_001[1].jpg](https://i.imgur.com/rvbURYc.jpg "WP_20151104_001[1].jpg")
>retro
Yeeeee
>>27792851
Fuckerino
looking to build a mk12 mod 1, is pic related a good lower?
Retro ish.
>>27792910
a lower is a lower is a lower
unless it's anderson, then you should just kill yourself
that's actually the exact lower i have on my M16A4
but with a serial number that's really low
>>27792816
>retro
I think for the next rifle after my SBR, I'll do a 20" with Nodak's top charger and retro lower, and some nice walnut furniture.
A retro silhouette counts, right?
>>27792946
if it's not a totally correct clone i will make fun of you
![WP_20151104_003[1].jpg](https://i.imgur.com/7Z0VnFq.jpg "WP_20151104_003[1].jpg")
Got a proper crush washer waiting for me in VT...if I ever fucking get back there, that is.
Waiting for the PSA A2 build kits to come back in stock
> skellingtonsittinginfrontofthecomputer.bmp
>>27792962
I'd expect nothing less.
>>27792937
I have 3 Anderson lowers... They are ok...
>>27792969
>crush washer
lock washer, you punce
>>27792816
1913 and a decade old mil contract scope design are retro, right?
>Retro Edition
Fuck the police.
Think, I'll go take some new pictures today...
![WP_20151104_006[1].jpg](https://i.imgur.com/NtYWQUA.jpg "WP_20151104_006[1].jpg")
>>27792992
The fuck ever, homes.
>>27793054
http://www.midwayusa.com/product/187501/dpms-lock-washer-ar-15
>2 1star reviews of people who tried to put it on 308 rifles
people like that should have their fingers removed
>>27793062
>Thicker than expected
Hurr hurr...
But yeah, that's what I ordered.
>>27792977
I have an Anderson upper matched to an Aero lower and the finish on the Anderson looks like it was paper mache'd in place... They don't look the same and it bugs me. I'm hoping it wears into a better look
>>27793117
not him but i have had zer0 problems with my anderson lower and it looks fine
>>27793080
>Thicker than expected
i can't wait to make fun of you some more
>>27793129
It's not so much that it malfunctions or that it's bad, it's just a strange rough truck liner looking finish, rather than the usual metal look on gun parts. It works well, and for $30 I bought it for, it will kill just the same.
Retro builds?
Still need to get an A1 lower for my A1 upper for a proper A1
>>27792966
>1 x PTAC AR15 Pistol 7.5" Upper w/ Sig Brace & 3 Magazines brand new for $750. Should I do it? Would be my first AR.
Nah. Never buy PTAC. Build your own, you can pick out exactly what you want and putting it together is fun.
http://palmettostatearmory.com/catalog/product/view/id/2109/
http://palmettostatearmory.com/catalog/product/view/id/1991/
http://palmettostatearmory.com/catalog/product/view/id/15174/
http://www.amazon.com/gp/product/B0109LY5AA/
http://www.aimsurplus.com/product.aspx?groupid=2110&name=BCM+GUNFIGHTER+CHARGING+HANDLE
Add an Anderson lower from your local gun shop for about ~$70 and you're sitting pretty at $675. Spend $30 for three PMAGs and you're in business. $50 less and measurably nicer.
![WP_20151104_005[1].jpg](https://i.imgur.com/d0Flw8X.jpg "WP_20151104_005[1].jpg")
>>27793132
I'll just grind it until it isn't, nog. If it's "thicker than expected" at all.
>This washer is almost 1/4" thick, way more than I imagined.
Did you have eyes, Ole Outlaw?
>it is meaty.
HURRHURR
>>27793183
Queer Brat said Anderson lowers are verboten, though
http://www.larue.com/taste-of-texas-sale?sort=popular
GOD FUCKING DAMN IT MARK
NO IM NOT DOING
NO I NEED TO SAVE MONEY
>>27793194
everyone knows i'm right about everything
>>27793246
>mfw I got qb to change his trip
>>27792925
Mk18 MOD 0 might as well be retro these days. They're modern classics.
>>27793194
They are pretty shit.
>>27792837
Not very retro. Looks more 2004 than anything.
>>27793268
>>27793246
>>27793273
What is the best 80% lower out there?
>inb4 buy a finished lower
>>27793300
They're all the same*
*except for the pricey special snowflake ones
I want a retro build..
>>27793300
tactical machining
fuckin $43
>>27793305
>They're all the same*
>*except for the pricey special snowflake ones
**And the Anderson lowers, apparently
>>27792816
Why the fuck does that not have the good ole fashioned tri prongered flash hider?
Birdcages get out.
>>27793312
>80%
>anderson
>>27793315
because its an A1, you scumsucking retard
>>27793323
Never bought one or built my own yet so I assumed they make 80%s too...otherwise I wouldn't ask
>>27793325
This image is from circa 1967. Look at the sexy tri point hider.
I don't know much about /k/ or ARs but I've grown up hunting and own multiple pistols, shotguns, and deer rifles.
My question is how hard is it to finish an 80% lower and build my own? I've watched some videos and found some jigs to purchase online.
I was just wanting to hear from some actually experienced people.
It seems like a super interesting project.
>>27793333
The entire point of an 80% is no FFL fee, no serial, and no roll mark.
Most big brands won't make 80%'s because then they don't get to advertise their brand on the side.
>>27793342
Pretty easy. It just takes a while.
Go slow or you'll fuck it up.
>>27793315
Every time.
>>27792816
Quad rails and acog are retro as fuck.
>>27793312
Yeah, because Anderson has had problems keeping to milspec for a little while now.
>>27793338
yeah, well mines not from 1967, dipshit
>>27793365
Go full inmajungle and get one.
Why are you faggots bitching about Anderson lowers?
>>27793352
>Quad rails
>retro
>implying
Retro would be an older heatgaurd, like the triangular A1 type or the A2 circular type.
>>27793338
That's an XM16E1, then. Not an A1.
>>27793361
Since when?
Does someone have a serial number range of out of spec lowers?
>>27793344
Okay, that's what it's looking like.
I found some templates and jigs on 80percentarms.com
I'll probably get that and try to follow it.
Especially since they say you can use a hand drill with their templates, since I don't own a mill.
>>27793380
no those are just early A1s
colt still had boxes of 3 prongs
fenced mag release
>>27793377
Because I accidentally gave queer bait attention
>>27793361
'no'
>>27793391
You can use a drill press too, you'll get straighter holes. There's one on Amazon right now I'm looking at if I can't get my grandpa's old craftsman press to work
https://www.amazon.com/gp/aw/d/B00HQONFVE/ref=mp_s_a_1_1?qid=1446671086&sr=8-1&pi=SL75_QL70&keywords=WEN+drill+press
>>27793392
Some late E1s had fenced mag releases. It's not really worth arguing about unless you can see the buttplate and various markings.
>>27793392
Everything I've read points to the cage hider being one of the definitive changes requested by the Army prior to the adoption/designation of the A1.
http://weaponsman.com/?p=11102
>>27793420
i have never seen one, and i'm looking hard
>>27793427
that doesn't mean colt had enough to go around
>>27793379
No, stfu.
Retro is whatever I say it is.
>>27793438
Right after the change those, and other components the Army deemed necessary to change, were set aside for civilian (read; SP-1) production.
Not saying there was never an A1 with a three-prong, just that if you see what otherwise looks like an A1 without a cage hider, it's a safe bet to assume it's an XM16E1.
http://looserounds.com/2014/10/21/the-xm16e1-rifle/
>>27793427
from what i gather it was the USMC that got a bunch of M16A1s with 3 prong flash hiders
all the A1 bircages at the time probably went to the army first
>>27793413
Wow, that's pretty slick. Only 80 bucks too.
But how would I move back and forth when the
lower is clamped into a vice?
>>27793457
I guess quad rails and flat tops might be retro if you're a millenial.
Slightly more retro since I last posted it.
>>27793471
Watch the lower finishing videos, my man. You can do that with a drill press vice.
I like that press because it looks a little better quality than Harbor Fraud for roughly the same price
>>27793472
I can agree with that.
>>27793438
the XM177E1 had a partial fence then later it had a full
![WP_20151104_007[1].jpg](https://i.imgur.com/KcAxrUC.jpg "WP_20151104_007[1].jpg")
>>27793468
> probably went to the army first
Taleasoldastime.webm
>>27793489
Thanks for the link, I've been wanting to get into building things. Need to get a hobby besides just school work.
Need to see what other stuff I could make with this sucker.
I've got about $500 dollars to play around with right now.
>>27793494
they are extremely rare
the picture in question is most definitely A1s with 3 prongs
https://www.ar15.com/archive/topic.html?b=3&f=123&t=505781
How much more effective at hiding flash is one of these than an A2?
>>27793514
are you wanting to buy one? i thought you guys were just talking about the different lowers, my b
>retro edition
muh carbeen
RIS II came in today, it's a lot lighter than I expected. Should be really nice once it's on the rifle.
Aimpoint came too, but the mailman didn't leave it with the rail for whatever reason, so I've gotta pick it up tomorrow, and hopefully I can squeeze in a range trip to get it zeroed this weekend.
shouldbcool
What's with the "carbine length is for gays" meme I've been seeing lately?
Are carbine length gas systems only good for SBRs? Should I just go with a middie for a 16" barrel?
>>27793577
>mailman didn't leave it
he dun stole it
>>27793587
i dont like it cause its fucking ugly, which makes it gay
>>27793514
mfw one was for sale a while ago
http://ingunowners.com/forums/class-iii-nfa-suppressors-machine-guns-sbs-sbrs-etc/350850-colt-sp1-sbr-original-rare-xm177e1-upper-w-colt-moderator-silencer.html
>>27793587
Midlength is the only answer for barrels 11.5-16".
>>27793590
I'll fuckin' fight him
He left a little slip though, it should be good.
>>27793607
>midlength
>11.5
Idon'tthinksotim.jpg
>>27793599
Perfect answer
>>27793607
Are there any numbers or tests to back this up? I was gonna pull the trigger on a barreled carbine upper for my build but I wanted to read about the pros and cons a bit more
>>27792845
PUT THE DIRECTIONS ON HOW YOU DID THAT PAINTJOB IN THE FUCKING BOX AND BACK AWAY!
>>27793642
>Idon'tthinksotim.jpg
It'll fit if you use a low-profile gas block.
>>27793647
>Are there any numbers or tests to back this up? I was gonna pull the trigger on a barreled carbine upper for my build but I wanted to read about the pros and cons a bit more
something like this
>>27793674
More pressure = more double plus good?
If so I might as well get a rifle length gas system
>>27793689
what length barrel?
>>27793663
You put the rifle somewhere and then you spraypaint it. I don't even think he did multiple layers, it's all one color.
Also what the fuck is wrong with your ceiling
>>27793670
It's not a matter of if it'll fit, it's dwell time and general reliability. Midlength on a 14.5" already starts getting a little picky with ammo, 11.5" really increases your chances of gas issues with cheaper, lighter ammo.
I'd say it's a tossup between midlength and carbine gas at 14.5". Shorter should use Carbine, and longer should use midlength, at least in my opinion.
>>27793698
16"
I wanna go as short as possible without getting a cückstamp though
>>27792845
Please, it looks really good.
>>27793702
go with a middy bruh
>>27793701
My brother did that while I was deployed, love 'em too much to tell him it looks like shit.
What paint? what prep? I did this one and well... It wore really quickly, although I don't mind the worn look I want that color more than anything. Makes my dick hard looking at it.
>>27793702
read part 3 here and lrn
http://www.defensivecarry.com/forum/defensive-rifles-shotgun-discussion/159038-defensivecarry-com-ar-15-buyers-guide.html
>>27793701
Just drill out the gas port to .1" or so, it'll be fine.
Why'd you delete your post bruh, I thought your AR looked bretty gud
>>27793735
you want to clean all the oil/grease off the rifle first
you can do a clear coat but its not necessary
take your paint and apply it to the rifle
let dry
hab painted gun
>>27793744
Daniel Defense pls go
So basically I CAN build a 14.5" barreled AR as long as I've got a pinned muzzle device on it?
Does that mean I can never change the muzzle device or what?
>>27793776
basically YES. iirc if you want to remove/change the muzzle device you would have to cut it off and re thread the barrel then pin a new device. i think gunsmiths do it
>>27792837
I know that's a type of retro look but is it worth making the gun hard to use?
If I was going to rail or scope my carry handle I'd put a magpul stock with a cheek riser on.
>>27793776
You can, but you've gotta break the weld, and remove the pin, which if not done right can destroy the muzzle device.
Basically you can, but it's a big ol' pain in the ass, so choose right the first time.
>>27793785
You are right but also kind of wrong.
Uppers are 100% unregulated, you can do whatever you want to the upper as long as it isn't attached to a non SBR/pistol lower until the OAL of the barrel has been returned to at least 16"
>>27793785
>>27793796
>mfw
Guess I should pick a 16" barrel for babbys first AR build then
>>27793796
This. Barrels are not THAT expensive, just pin and weld a BE Meyer/vortex/whatever or the flash hider for the suppressor of your choice the first time for no hassle.
STEP ASIDE FAGS
NEXT AR KILLER HERE
>n-no it's not sub MOA
>n-no it uses proprietary parts
>n-no the base model isn't sub $1000
>n-no it doesn't do anything a $600 AR can't
>>27793816
Or just get a 14.5" and pick a good flash hider you won't want to replace and get it pinned.
I sorta want a 13.30" barrel with a pinned 2.75" BE Meyer 249f but I also sorta just want an SBR, hard to decide.
>>27793785
so can I permanently pin this to the end of my 14.5 barrel and add a suppressor later on?
http://www.griffinarmament.com/M4SD-Hammer-Comp-5-56mm-1-2x28-p/xhp556hc.htm
>>27793825
You forget
>over 8 pounds
That's the main reason I don't consider anything.
The only true AR killer is a Daewoo K2.
>>27793839
When you can throw together a basic AR for less that $500 that will function fine there's no killing them. Especially not with something that starts out at $1200
>mfw my buddy said the ARAK-21 was the gun that was going to kill the AR
>>27793825
This is a retarded false narrative.
Nobody is putting out anything new, it's either similar to an AK/SIG, or it's similar to an AR18.
The only neat new stuff is in the bullpup world.
I think the deserttech carbine is really neat because it has a forward located mag release instead of a rearward located one.
It's the only one where you can drop mag and grab the replacement at the same time.
>>27793869
I was making fun of the people that start threads about [insert new rifle here] being the gun that's gonna kill the AR.
Like a few months ago with the Sig MCx
>>27793869
*in addition to a rearward one
>>27793863
K2s aren't on the market, I only meant theoretically if they made a new one that had a flat top and some provision for AR handguards or something. (not sure how though, their barrels don't screw on)
>>27793888
Ah, right.
So you can practice retention and non retention reloads with different releases if grab and rip tactical reloads are your thing but drop and grab empty reloads are also your ting.
>>27793838
Sheeit, I could buy this and pin it on a 14.5" upper without getting a cückstamp?
>>27793905
seems like it. It's 1.75 inches long, so that would push a 14.5 barrel over 16 inches
Is there a good way to cover up an engraved rollmark on a lower? For example could I use some kind of filler and then cerakote over the whole thing?
>>27793674
am i reading it wrong?
if you have a carbine gas system with a 14.5" barrel, that will have more pressure than a carbine gas with a 16" barrel?
Retro enough for me
>>27793942
Yup simple body filler. Block it flat and spray.
>>27792925
And the not-classic
>gas block arrives friday
i should have paid for overnight shipping but it's ok, i can be strong and wait 2 days.
Where to buy barreled 14.5" uppers? Poorfag State Armory has none, for some reason
>>27794096
With something small like that it's not worth it. Overnight is best for stuff you don't want floating around.
Pic related
>>27794113
BCM. Great quality and great price.
>>27794148
so how you liking the warden?
>>27794153
Well worth it, especially on a brake. Your shooting buddies will definitely appreciate it.
>>27793974
appears you are correct
>>27794133
it's only $20 for overnight plus when i get it, it will start raining aging so i won't be able to take pics.
do you have NVGs for use with the peq15?
>>27794162
welp, looks like I'll have to find a way to get one here with a warcomp
>>27794189
just have it shipped as machine parts.
>>27794179
Not yet, building a kit maybe. Price was too good on this one to say no
I tried retro but I gave up when I could not find triangular handguards
>>27794210
literally google
http://www.keepshooting.com/m16-triangular-handguards.html
>they don't have BCM watches
http://www.bravocompanyusa.com/BCM-MK15-Tritium-Watch-Limited-Edition-p/bcm-mk15-watch.htm?utm_source=BravoCompanyUSA&utm_campaign=a2139c2cf6-Watch11_04_2015&utm_medium=email&utm_term=0_1d062d760f-a2139c2cf6-311224757&mc_cid=a2139c2cf6&mc_eid=0c5f42bc1c
>>27794230
It's actually a good looking watch
>>27794228
>Availability: Out of stock
>>27794191
yeah probably. I mean my Zenit stuff was engineering tools
>>27794189
unless you already have sfmb that is silly.
>>27794244
literally google
https://www.gunpartscorp.com/ad/204900.htm
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=519539182
>>27794230
>battery
I'll pass
Maratac SR1 here
I actually may snag one of these watches. Never been a huge watch guy, but I've wanted a submariner or omega for a while...
>>27794281
casio f-91w master race
>>27794230
>>27794295
i am legitimately considering buying one as well
but it would suck to scratch it up at work
Building my first AR and looking for a free floating handguard.
Should I go 13" or 15"? It's gonna have a 16" barrel
>>27794230
>battery without solar and no useful features
>'swiss' made but no mention of who made it that i noticed
ill just stick with protrek and a proper dress watch.
>>27794323
up to you really.
15" if you want maximum sight radius
13" if you want something a bit lighter.
also depends on how you feel about barrels sticking out past the handguards. I don't like it
>>27794323
15 is dank as fuck bruh
>>27794298
How broke are you?
Building babbies first AR
r8
>Anderson Stripped lower
>PSA QMS LPK
>Brownells carbine buffer assembly
>B5 SOPMOD Bravo stock
>Aero Precision stripped upper
>DPMS upper parts kit
>BCM 14.5" mid length Barrel
>AIM v2 Nitride BCG
>Type 89 J-Comp
>Midwest Industries gas block
>Midwest Industries Gen 3 M-lok 12" rail
>Magpul MBUS Pro front and rear
>Magpul M-lok Vertical Grip
Not sure what optic I want yet but it'll probably be a PA Advanced. Then I'll probably get a light of some kind Overall price is at $1128 but I know I could go cheaper.
>>27794343
My PEQ has a serial on the top front. Did you get rid of yours?
>>27794358
>Anderson
beyond that, bretty gud.
>>27794364
MS paint has some nice features.
>>27794358
Only part I have experience with is the BCM barrel. You'll enjoy that. I would wait until Black Friday and try and get a great deal on a BCM upper with BCG and CH.
>>27792816
>>27794350
not at all
>>27792816
Mk12 is approaching retirement. Do I have to wait until 2018 to call it a retro?
>>27794367
what's wrong with the anderson
>>27794397
literally nothing, dont listen to these retards. you gon get all sorts of (you)'s
>>27792816
,
>rack codes
>>27794411
stop posting shit thats not yours without asking a question about it, you are literally shitposting
>>27794397
They're all out-of-spec.
>>27794404
Somebody fell for a marketing pitch.
>>27794411
>>27794419
dude, if you don't own it, then fuck off
>>27794420
>retro edition
>doesnt contribute
where did i claim it was mine, faggot.
>>27792816
>retro
>Not three prong flash hider
>>27794433
>where did i claim it was mine, faggot.
EXACTLY YOU NIGGER. posting pics of guns that are not yours with no question is not contributing
>>27794427
o shit really? where specifically?
>>27794431
>retro edition
>contributes nothing
>is a faggot trip to boot
call the mods, I dont give a fuck
>>27794438
>>27794447
nowhere dont listen to them
>>27794446
>you mad
haha faggot autist
NNNNOOOO REEEEEE NO POSTING ANYTHING BUT THE SAME 5 PICS OF THE TRIPS RIFLES NOOO REEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
eat shit fag. you are a child
>>27794449
>contributes nothing
i made the fucking OP
that's my rifle
posting images from arfcom while saying nothing is not contributing
>>27794460
im not posting anyones guns, im answering questions and engaging in conversation regarding AR's. you are posting pics from google without saying anything, that is shitposting and contributing nothing
>>27794468
NEAT
>>27794486
that isn't even a real gun you literal fucking retard
>>27794468
Yo qb is your AUG just rattle canned or is that dura or something
>>27794478
rrrrrrrrrrrrrrrrrrrrrrrrrrrreeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee mmmmmmmmmmmmuhhhh FFEEEE FFFEEEEELSSSSSSSSSSSSss
>>27794492
oh noooooooooo i have upset a trip ohhhh fuck what shal i dooo d fuckkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
>>27794495
it's rattle canned
>>27794507
you are a faggot.
>>27794507
bruh u own like a billi guns
i'm about that life
>>27794506
I think they just want you to post your rifles or not post
![IMG_20151028_172720538[1].jpg](https://i.imgur.com/zFvs7gD.jpg "IMG_20151028_172720538[1].jpg")
>>27794515
yes, and?
>>27794496
Interdasting
>>27794507
Cool. I'll probably end up painting the plastic parts on mine.
>>27794517
which is how we end up with thread after thread of the same 3 pics from each trip, which is just fucking useless circlejerk.
btw, heres my mk18 pretty retro lol amirite boyz
>>27794447
Grip screw holes not threaded properly. Action pin holes and bolt catch pin holes out of spec, etc.
>>27794457
Anderson pls.
>>27794535
Except those aren't yours.
>>27794533
why just the plastic?
>>27794540
HOLY SHI TU R A FUCKING GENIUOUS BROOIO HHOLY GUCF FUCK
>>27794533
Paint the whole thing - citristrip takes paint off no problem if you change your mind.
>>27794536
>Grip screw holes not threaded properly. Action pin holes and bolt catch pin holes out of spec, etc.
'no'. i have had zero problems with my lower
>>27794554
Please go. Go hang out with CG
Other people post guns that nice. Why not post your own?
>>27794555
not off polymer so easy
i just gave up on my scar and bought a new receiver and stock
>>27794546
A E S T H E T I C S
Did you prep your in any way?
>>27794565
I got it off my SOPMOD, did you use citristrip or Acetone? What's the registered part of a SCAR?
>>27794536
is this from personal experience or are you just saying stuff that you read elsewhere? I ask because they're like the most common lower ever, which leads me to believe that they in fact function
thinking of re painting muh gun with this fern pattern
>>27794561
he doesn't own any guns
he's just assblasted we told him to fuck off with shitting up the thread
now he's just trying to upset us
>>27794567
>prep
no..
>>27794583
well it's probably because it was duracoated, then rattle canned
duracoat strips off anodizing really easy
but paint is an absloute pain to remove from any textured plastic
the upper is the serialized part
>>27794565
Needs an A2 stock
>>27794592
they do function, retards get one bad one and suddenly the whole company a shit. i bought a stripped one and have had zero problems
>>27794609
>>prep
>no..
Just being thorough.
>>27794599
Why not? Then you could do a different and ugly pattern every month like a certain unnamed trip..
>>27794614
no it needs a scar stock
i should have just stuck with the way it was
>>27794230
>Swiss Made Chronograph Movement
>Doesn't actually say the movement or manufacturer
I did some quick research, looks like it's a rebranded Microtec, which is in turn a rebranded Traser, which means it's probably only using a Ronda 5030.D.
Mehhhh. It's not bad, just not my style and I definitely wouldn't pay $600 for it.
>>27794317
It's PVD and a sapphire crystal. It's probably not gonna scratch. The bigger issue is that...it's big. It's a 45mm x 52mm x 15mm, it's gonna stick out and you're probably gonna bang it on everything until you break it.
27794364
Paint, as in MS Paint. Take a closer look at that picture.
>>27794625
http://www.midwestgunworks.com/mm5/merchant.mvc?Screen=PROD&Product_Code=F148000040&Store_Code=mgwi
>>27794625
Isn't there a new SCAR stock coming out?
>>27794623
>ugly pattern
n-none of my patterns are ugly
>>27794625
ACR
C
R
>>27794644
Not what I meant m8
>dubs two posts in a row
>>27794635
i already bought a new one
thats it there
>>27794637
who cares
there's the KDG ACR stock, but the ACR stock sucks
>>27794599
>I'll just keep painting it in until it isn't shitty anymore
we've all seen how well that works out :^/
>cut barrel down from 16" to 12.5" or so so the MD is just beyond the edge of the handguard
>test for function and open gas port until its 100%
Good idea?
>>27794682
I hope you don't own any dogs
>>27792837
Why would you only paint the upper?
It looks kinda stupid.
But if it's what you like...
>>27794682
probably not
but i would love to see it tried
it's mid length isn't it?
>>27794687
We've had 3, the floor doesn't seem scratched to me.
>>27794659
im going to wait for December, then ill do a Christmas theme
>>27794697
its all painted.
I sold the old lower.
>>27794697
Half painted Masterrace
>>27794699
Yeah, apparently people have made 12.5" middies function.
Result would be something like this, if I ever decide to get an ACOG.
>>27794665
you dont like my fern?
>>27794702
Kek.
He's talking about the ATF coming to your house and shooting your dogs in the process of confiscating your illegal SBR.
>>27794712
Oh.
Well that looks a lot better.
Why change handguards and not paint it?
Paint it all, it just looks really weird.
>>27794726
No...
>>27794697
its just to look cool
>>27794733
because I'm waiting for my new lower before I do my new pattern.
>>27794735
Or people swap around uppers and lowers.
>>27794716
You have to admit that if all but the upper is painted it looks half decent.
But if it's JUST the upper receiver then it looks.. well, not right.
I dunno, maybe it's just me.
>>27794726
Ah, went over my head.
Good thing I live in the land of 5 round magazines then :^)
>>27794718
well it would be cool
>>27794740
Fair enough.
Are you going with the same pattern?
>>27794752
It's not that painted/unpainted looks bad, it's just the patterns that are supposed to continue that stop that looks bad.
Like tigercamo or old woodland.
Or even any ddpat
If it's solid then stops that's different.
>>27792837
That thing looks like a shitload of fun, if you ask me.
>>27794765
no, most likely DPM or maybe CADPAT.
>>27792937
>>27792977
>>27793117
>I have an Anderson upper matched to an Aero lower and the finish on the Anderson looks like it was paper mache'd in place... They don't look the same and it bugs me. I'm hoping it wears into a better look
My biggest complaint. Not the finish itself, but that it doesn't match shit. Also, my hammer pin tries to walk out but that could be the PSA parts kit and not the lower.
>>27794740
Where can one get these stencils? I tried searching but all I get is some Russian VK bs.
>>27794811
Not gonna lie, DPM would look pretty cool.
>>27794821
russian thunder. but takes like 2 months coming from russia and costs 35 bucks per set.
>>27794821
http://tangodowncustoms.storenvy.com/
I've heard that this guy is pretty good. It's all vinyl stencils. Prices aren't bad.
http://palmettostatearmory.com/psa-complete-rifle-lower-receiver-a2.html
http://www.midwayusa.com/product/594772/dpms-ar-15-a2-upper-receiver-assembly-556x45mm-nato-20-barrel-a2-handguard
doing retro spaghetti build. buy this yaes, or noe?
>>27794842
Sweet, thanks
>>27794535
>>27794506
Are you the same faggot who claimed to be Eric yet stopped posting after I called you out about saying you didn't have an instagram? If so, fuck off.
>>27794842
i just ordered KLMK and partizan
