/akg/ AK General
Images are sometimes not shown due to bandwidth/network limitations. Refreshing the page usually helps.
You are currently reading a thread in /k/ - Weapons
You are currently reading a thread in /k/ - Weapons
AK General /akg/
Bayonet Edition
>Thread #12
Old thread here >>30503387
Where's a good place to get a cheap 5.45?
Anything like a WASR2?
Should I sell my two black (10) 6x5 bayonets and put that money toward a proper Russian 6x5 for dat triangle stamp?
(10) 6x5s are easy enough to find for around $40 but Russian ones are like $100
>>30527326
Go for it. Make sure you get non demilled one.
>>30527240
In with Rob Ski testing the IO.
https://www.youtube.com/watch?v=_Kv0Q9GI43w&feature=youtu.be
>>30527347
>rob_ski_IO_test_298_rounds_aftermath.jpg
rip
>>30527347
I know io is shit, but the ftf issues they had at the end of the slr-107 test makes me question if some of those mags they are using are wore out or something.
![f628fa3ff6d2f93f65537255f1639dae[1].jpg](https://i.imgur.com/zewlR9x.jpg "f628fa3ff6d2f93f65537255f1639dae[1].jpg")
Gibbs-Matra steel bolt-hold-open mags
worth it or nah?
they cost about the same as surplus steels and I like the BHO Yugo mags I have already
>>30527417
The feeding issues with the SLR-107 were with first generation magpul mags, ie absolute garbage.
>>30527326
How much u want for one ?
plum bayonet checking in.
So if I want to grab a new slr104 with a triangle folder am I just fucked until next year at the earliest? Assuming they're allowed to import them after the election, that is.
picked up a DDI ak74. Goddamn I love this thing. Should have bought one sooner.
>>30527432
They're meh. Just get surplus.
>>30527483
Trump will open up the firearms market again
>>30527255
You can still find wasr-2s floating around if you look hard enough.
>>30527521
>DDI ak74
love my 47UF
Wish I'd gotten a 74 as well.
So there's a npap and a C39v2 at my lgs. Should I pick one of them or buy a used Mak90 off gun broker instead?
>>30527483
buy a standard 104fr and replace the polymer stock with a 4.5mm folder.
>http://www.gunbroker.com/item/568907461
>>30527255
http://www.gunbroker.com/item/569676095
AK with bayonet looks awesome
>>30527521
>WW AK74 built by DDI
>it was great at the start
>now over 1500 rounds
>weird FTEs at least 2 times every 100 rounds
at least if I sell it I can get my money out of it for sure
>>30527091
I think they're polish based on the magazine pouch and oiler they came with. But I don't know for sure, they're the first steel 7.62x39 mags I've bought
>>30527347
I'm ~600 rds into my io and it has yet to fte. Only had one ftfeed because of a dent in my steel mag stopping the follower. Suprisingly hasnt exploded. No failure to fires.
I've been looking for a Russian RPK kit and found this one on GB. Do you guys think it would make a good rifle? Or have any leads on another Russian RPK kit. Not Romanian junk.
http://www.gunbroker.com/item/569669986
>>30527529
If he does, I hope his love for China brings in some tasty imports.
>>30527557
I suppose that's what I'll do. Part of me doesn't want to have to start buying yet another caliber but then I remember what happened the last time I handed a sgl31 back to the guy at my lgs and decided to think about it a little longer.
>>30527557
>USPS money order only
Why? Jesus fuck
>>30527683
it will only be as good as the smith who puts it together.
>>30527347
>AKOU doing 5k rounds with the IO
OH BOY. I am hype for this one.
>>30527529
I hope you're right but I have a terrible feeling you're wrong.
>>30527752
I was planning on using Piece of History Firearms. Read about them on the akforum, liked their work.
Reposting my question from last thread: What's a good price for 5.45 Silver Bear? A security/prepper store near me has it for $10/box, or $0.33/rd. The lowest I saw on Gunbot is $0.25/rd, but that was for a 750rd case, which I don't want to buy right now, and the highest was $0.32/rd, but I don't know if that includes shipping cost.
>>30527432
They turned out to be shit. Their mfg video was cool as fuck though.
>>30527652
If it aint on this list, its not milsurp. And judging by those fuckhueg front lug welds, Im gonna say they are not.
>>30524371
Its called SlavTucky Windage, so they don't have to adjust their elevation.
>>30522646
>Forgetting to dimple properly
You have that crossdressing faggit build that?
>>30519089
>roasties
nah, most of that is genetic dice, but that doesn't make it any less unappealing...
>>30527683
Front trunnion isnt original. Bolt is mismatched#, extractor and selector # he did himself with a dremel - possibly even the top cover. For that much money, I'd pass without a second thought.
>>30527735
because paypal is shit, and no one likes giving out their CC info over the phone so someone can ring it up on their 6% fee iPhone swipe terminal.
>>30527735
Why not? It's a very low cost method of sending money that gives the recipient cash instead of numbers on a computer, and it leaves a very minimal paper trail.
The only drawback is that it's scam friendly, but as long as the seller has good feedback you're probably fine.
>>30527240
Muh bayos
>>30527855
>extractor and selector # he did himself with a dremel - possibly even the top cover.
please sir I am BEGGING you to stop posting about things you aren't 100% sure of
Two months my friends and I should be on the way home to good ole' Wisco to acquire some OC after two years.
>>30527432
>BHO
If you want BHO, get those Yugo ones.
Also to consider is these fuckers from Weapontech. They're plastic, except for the catch lug. I've been using one in my Tapco bitch mag and so far it hasn't broken.
>>30527923
He fucked up on the 7 chimps... or are you too blinded by "m-muh original slavshit!" that you cannot tell the difference? Perhaps its your kit?
I posted this in the last thread. What's the cheapest slavoptic that's in the 100-200 USD?
>>30527855
>Forgetting to dimple properly
>You have that crossdressing faggit build that?
It's a fucking IO retard.
It was in response to AKOU getting theirs.
>Do you even own an AK?
>>30527970
http://kalinkaoptics.com/rifle-scopes/standard/fixed.html Pick your poison, some would probably look neat on a dovetail mount.
>>30527998
Buying slavshit optics is stupid if you live in the Western Hemisphere. So much better options.
But my aesthetics.
>>30527961
If it was my kit I wouldn't be selling it.
The seven is fucked up because the original Soviet worker fucked it up when he scrawled it on in nineteen eighty fuck-you. It was standard practice for MANY years on Russian AKs of all kinds to scribe on the serial number on certain parts. The extractor is the most common part you see this on, but also the top cover, the gas tube, and the safety.
Please don't make me open the safe. Know when to fold
>>30527672
>only 600 rounds
KEK
>>30527961
It's a deact kit and I find the claim that it has the original barrel to be highly suspect, it's not a real RPKS-74 kit as that is obviously a random folder trunnion that he threw in with the kit, and he's probably selling it at a 600% markup, but I am positive that the parts you are criticizing are the original serialized parts.
As a side note: those folder trunnions alone are highly valuable and have sold for as much as $1000 in the past. I still wouldn't pay $3000 for that kit though.
>>30527240
can I play?
>>30528036
Open the safe cunt, the typefont doesnt even match the other parts with the genuine 7 in his own fuckin gallery.
And dont try to play it off on "oh drunk slav just had his hand slip"
The only real 7 is on the recoil rod. The dumbshit used a clockwise rotation dremel instead of a counterclock like slavs use. And you claim yourself to be an AK 'master'.....
>>30528026
western optics just don't look right.
>>30528115
Only if you post some non-potato 56K pics. This isnt 1997 anymore.
>>30527998
>>30528026
I tried to get a rail adapter but I could not find one for my slav-mount. I've picked up a NPAP M70.
Pic related.
What mount is this? Am I going to die?
>>30527855
Please stop posting or start posting any gun you own.
>>30528151
I'll take that as a no, asshole. go fuck yourself.
>>30528073
>deact kit
Scratch that I looked at it again and it's one of the Bulgarian serialized kits that were made in Russia but finished in Bulgaria
Ohio Rapid Fire imported those years ago and that is in fact the original barrel, as those kits were imported before the barrel ban.
Personally I find his claim that the front trunnion is original, but sanitized, to be most likely true.
It's still like a $2000 kit though.
>>30528133
I have never made such a claim in my entire life, but I appreciate your thinking so.
>typefont
It's done by hand you fag, there is no font.
Why would an Ohio Rapid Fire kit with all matching parts be missing the fucking extractor of all parts? Also were the fuck are you getting this clockwise/counterclockwise information from? Am I being trolled??
>>30528156
Fuck off "The Russian", you completely fucked up 8-chinz /k/ and now you are back to shitpost on 4chinz. kys you skellington fuck.
>>30528193
I'm curious how you're identifying that poster as TheRussian with so little text to judge and none of it being in his retarded intelligible deaf-speak
>>30528186
>all matching parts
>Barrel is obviously worn more than kit itself
>trunnion is "unserialized"
Im telling you that those parts were serialized afterthefact. And if you dont know the clockwise/counterclock info, then you are no where near as savvy as you claim to be. And no, this is not a ruse.
>>30528210
I can tell from his previous thread posts, and they always end with the same bullshit.
>>30528193
No proofs
>tfw 6x9-1 bayonets are unobtainium
>>30528354
I just want one of those web things for bayos.
>>30528415
Don't bother with these idiots, Chimps. Here is an original RPK kit I have pics of it. Same font all around.
>>30528447
Selector font.
>>30527932
>>30527855
>>30527525
What turned out wrong with them? I'd think it's hard to fuck up a steel mag with a slightly special follower.
>>30527347
>bought an IO without doing research several years ago
>everything looked fine at the store
>only problem was ftf <5 times in a case of Wolf HPs
>mfw playing with fire
>>30527557
Yup, just grabbed a 104. Going to be swapping the furniture with wood and a triangle folder eventually. Thanks friend.
>>30527569
Woah. I'm really interested in this.
Awwww Yis
anyone get feels when they see their rifle's tracking number, it must be so lonely
>>30527521
I really like my DDI AK74sf, its probably my favorite AK ive owned so far
>>30527551
npap price?
>>30527432
They are using old Yugoslavian tooling to make the mags, yet they still managed to fuck it up, Buy surplus yugo mags if you want BHO mags.
https://www.youtube.com/watch?v=rJxtdAAo_bQ
>>30527483
If imports are still going IF hillary gets in, The arsenals that will arrive will probably be going for $2k at the minimum.
>>30527683
RPK's in semi auto are a novelty, 7.62x39 from a 23" RPK barrel only gains about 100fps, they are for sustained fire.
>>30528596
I frequently layaway rifles since I like to buy a few at a time and a few weeks later they all go on an adventure to my FFL. Sort of like the brave little toaster, but with guns, and nobody ends up in the junkyard.
>>30528154
The rail is an M21.
It's typically used on SVD type rifles, but it's placement on the Yugos imported is odd, and most SVD mounts won't sit at a proper height.
RS Regulate makes a Yugo specific mount just for these imports.
The 306/307 RS mount to be exact.
You will also need an upper mount and an optic to go with said upper mount.
>>30528354
Those are not official military issue, they are not fielded by the russian army.
>>30528629
Eh, I don't like to panic buy, but I remember handing the sgl31 back to the guy behind the counter and letting him know I'll think it over only to come back a few days after the import ban and it was gone. It was a shitty feeling.
>>30528649
That's 5,45x39mm not 7.62
>>30528685
>Panic Buy
One thing that's pissing me off is that I seem to constantly look like a panic buyer when I'm not. I either buy my stock of ammo or a new gun right after something bad happens.
>>30528497
Lots of fit issues in various guns. Some mags fit good in others, while others are wobbly as shit.
>>30528656
Are you talking about this?
https://www.amazon.com/RS-AK-306-Lower-Modular-Mount/dp/B00TTBAFZ6
>mfw 130
I think I saw a youtube video the other day when someone shaved off a bit of metal from a standard adapter and it fit alright.
I might give that a try (picked up a mount for 20 USD so no big deal if it fucks up.)
I only really want to use the optic mount because the cheek rise on the stock makes it super hard to use the irons. Do you think a dust cover with a mount is a better option? I'm only concerned about the height.
Anyway, thanks for the pointers on this.
So if I were to get a WASR 2, it could take all AK74 parts right?
Would I be able to add the AK74 flash suppressor after purchase?
>>30528671
>they are not fielded by the russian army
I thought they were being issued per the "Ratnik" program?
If so, while only select units currently have them, its hardly "not fielded".
>>30527683
Looks good to me. I wish I had the cash.,
>>30528765
Yes that the 306, the front biased version.
The 307 is the full length one.
>$130
It gets better. That's just half of the "full" mount. You'll still need an specific upper mount (another $65 or so) for the optic you choose.
I've seen the mod you're talking about, taking a chunk out of the rear of the mount, but I have no experience with doing it.
Read this thread on the files, there's quite a bit of info on yugo specific mounts and tips.
http://www.akfiles.com/forums/showthread.php?t=186767
>>30528949
>>30528972
>It gets better. That's just half of the "full" mount. You'll still need an specific upper mount (another $65 or so) for the optic you choose.
They're expensive but fucking indestructible from what I understand. I was gonna get one myself, and a PA red dot to go with it, but then I started building an AR.
>>30529002
>>30529016
>>30529031
>>30528709
isnt it still about 100 fps in 7.62x39?
>>30527754
I lose it every time he says retard strength
What do you guys use for gear along with your rifles? I use either a SPOSN Smersh or Type 81 chest rig that I wear over my gorka suit.
I'm not really sure what I should use to carry 10 round 54r Vepr mags. One of those 4 cell belt pouches?
>>30528972
Thanks a lot for the link! I'll give that a read.
I'll also make a post to say if the mod works and link to the cheap as fuck mount I'm using.
>>30529144
I lose it every time that fucking drum moves holy fuck.
>>30529013
Yeah, you get what you pay for with RS.
Best mount available, hands down.
>>30529154
Np.
I'm sure if you can get the geometry right, it'll probably work fine.
But post updates when you do it though.
Always good to see if stuff works or not.
>>30528509
Based bugeye. I have one in need of much tlc.
>>30529002
>>30529016
>>30529031
>>30529049
Neat article thanks for sharing
>>30529320
>>30529330
>>30529337
Once I get my krink I think im going to change out my Bulgarian kitbuilt AKS-74, should I get some laminated 74 furniture or should I get some arsenal tan handguards than dye them border guard green to make a borderguard looking rifle?
>>30529365
Heres a guys furniture he dyed Id like to mimic by dyeing the arsenal sand furniture, https://www.k-var.com/shop/AK-403DS.html
>>30529404
>>30529427
>>30527240
What would be the best way to go about getting an underfolding ak74? From what I understand it was never an adopted military thing, but it is very much in the realm of doability
>>30529434
>>30529445
>>30529456
>tfw the Indiana anon who said he had a mosin crate and an AMD 65 crate never emailed me
>>30529443
Nodak makes a 74 receiver for under folding trunnions.
>>30529469
>>30529483
Would I be able to put a krinkov kit with a welded muzzle device on that reciever?
>>30529558
Since your dont need a sidefolding stock retaining latch sure krinks use normal 74 receivers.
>>30529577
Ok so ore the border guard bags all green or green with black tops? or is this not border guard mag?
It's an all black modern 5.45 for AK-100 series that is new in wrap.
Eternal stamp waiting edition
>>30530071
sucks to be you
Dont let this die.
post
4am bump
>>30528026
>not having an optic calibrated specifically for the caliber your AK is in
So why does your opinion matter?
>>30531441
By the way, the obzor looks really damn good on that.
>>30527240
finally fully paid off my new AK
ill get it in 10 days.. thanks California!
>>30531624
How does it feel knowing you've purposefully made a terrible decision?
>>30531663
yes, hello my fellow memer! I love memes also! maybe we can be friends XD
>>30531665
Century Arms AK's being shit isn't a meme, have you not been living under a rock for the past few months?
>>30531676
theyve had a couple of lemons
>>30531683
>US made barrels for an AK
>ever
>pot metal casting
>ever
https://www.youtube.com/watch?v=Vs7eK2SmGYM
Literally confirmed worse than a WASR
I seriously don't know why people subject themselves to wasting money, the US made barrel should have been a red flag enough
>>30531712
its still working, isnt it?
>>30531715
It's not going to be working as long as any other AK ever, aside from an IO. I'm sorry, you'll feel the buyer's regret once the denial is gone.
>>30531719
as if its going to be my main gun. its a gun I purchased before the gun scare.
I put the gun on layaway here in CA and I went to pay it off today after 2 weeks and all the AR's are gone. they were sold out of ARs and AKs that werent $2000. they dont even carry WASRs for some reason and didnt have the C39v2 in stock back when I bought the AK.
I'm going to have fun posting it all over these threads when I get it in 10 days
>>30531605
There's an ACOG for both 7.62x39 and 5.45.
*yawns*
>>30531728
Still a pos. Have fun when parts start to wear down under less then 1000 rounds.
>>30531715
Slavery worked too anon, doesnt mean it wasnt awful.
>>30529103
>molemmat
dekoja vai toimivia?
Sup /akg/
Got my first bulk order of ammo
How did I do?
>>30532261
couldn't have done better when it comes to steel case ammo
1/2
2/2
>CAA kalashnikov-USA ak-alfa
>2016
What do you think, /k/ommando ?
>>30532779
POS. Not even a real Kalashnikov. Get that shit out of here.
>>30532779
Looks too try-hard tacticool will end up like the ARX, ect.
>>30532779
I really don't know who their market is. AKfags enjoy the traditional sights/optic mounts, but ARfags already have a rifle with a thumb selector, flip up sights/rails. maybe people who want AR comfort but in 7.62x39?
>>30532779
>made in USA
its shit
>>30533100
>witness me
Is that what you'll say before your gun explodes?
w o a h
AKs aren't worth getting in the US. 922(r) effectively gimps them from ever being well made.
>>30533430
You finally get the whole mag?
>>30533430
r a r e
a
r
e
>>30533447
yep postman just came. I don't work Thursday's so it worked out perfectly
>>30533456
d u d e
>>30533466
Nice, is the steel insert poking out of the polymer near the base plate?
You going to shoot with it ?
>>30533506
Yes, but that's somewhat common with Izhmash mags, I've seen it a lot. It's cool because now I can see what's actually going on in there with the steel reinforcement that makes it pop through in those locations.
I haven't decided if I'm going to shoot with it yet or not. Transparent polymer is hard to make without it being brittle.
I got some more info from a guy with a 5.45 one, he's selling it for $2000 but hasn't had any takers. According to him, his is an older one from the 90's from a brief attempt at Izhmash to make a translucent mag. All of the older ones have cracks everywhere but the newer ones seem to be made with a better polymer.
>>30529473
>2 crates
I want to buy some
>>30533079
>that
>comfort
>>30533609
man I'm jelly, that's cool as fuck.
I need to get a plum rpk74 mag saw a couple on files but missed out. Not ready to drop translucent mag money yet......
>>30533609
>$2000 for a magazine
>>30533630
They were empty crates
>>30533609
Yo chimps, do you have any info on where to buy an empty soviet rifle crate? I would prefer a mosin 20 crate, but others would work too.
>>30533660
I've been tempted by some of those I've seen recently as well
>>30533670
Actually I checked and it's $1200, but I have seen mags sell for over $1500 before, not just listed, but actually sold
>>30533687
Have you tried Classic Firearms? I believe it was them that, at one time, had so many spare nugget crates that they set them out in their parking lot and let people come and take them for free, as long as they hauled them off themselves. They might have some left. I have seen them several times at gun shows before as well. AIM surplus? Anybody that imports nuggets by the hundreds has had crates at some point.
>>30533743
I sent an email to AIM earlier this week and was told that they do not have them for sale. Im going to probably have to browse gunshows for a while before I can find one.
>>30533687
1. Buy a crate of 20 moist nugs, they aren't that expensive.
2. Sell nugs on armslist/gunbroker/whereever. 3. Keep crate.
4. Profit, or at least break even and still have a bitchin crate.
>>30533773
Did you try jandg sales ?
>>30533430
>>30533466
>>30529685
That's not a BG mag, it's a black mag. The green tint is due to shitty lighting.
>>30532619
>>30532630
What rifles are these? I want them.
What's a good place to get good looking wood furniture for an ak47?
>>30534210
Apex Gun Parts
Ironwood designs if you're feeling spendy and can finish it yourself.
>>30534102
can't say for the top one, but the bottom is a PAP pistol with a sig brace..
>>30533660
I have some nos rpk plums, but they are really dark. I'll sell for 110 shipped.
>>30533424
if it gets me to Valhalla
>>30534369
Mediocre
how does the hammer pin come out? I took the paperclip out first and all the videos are now telling me I should have done that a few steps prior.
>>30534788
Once you take the paper clip (sheapards hook) out you push the big silver pin out that your hammer rides on. You push from the side of the safety towards the rail mount I believe. Wiggle your hammer a bit if the pin doesn't budge. You should be able to just push it with any metal rod smaller than the whole the silver pin sits in. Be careful not to fuck up the sheapards hook. Go out and buy a retaining plate
>>30534336
Got pics ?
So guys, I just bought an ultimak and the Primary Arms Md-ADS red dot last night for my Slr 107fr from the Akou store to support Rob. How fucked am I for not saving up for an Aimpoint? Trying to stay on budget over here...
Pic unrelated
>>30534963
If it's the anon from Russia. He's gonna try and change the price on you and try to get you to buy a package deal.
>>30535205
What? Yeah i do offer nice discounts for bulk but what do you mean by
>gonna try and change the price on you
that?
>>30535205
How many we talking ? I would not mind a 4 pack if the price is right. I can always resell locally for more than I paid.
>>30531624
> having to make payments on a cheap gun
> buying a RAS47
> living in California
>>30532779
Looks ok. I hate the permanently attached pistol grip though.
>>30535205
You are that autist faggot who wanted 40rnd bakes from me?
>>30531750
>I don't know what I'm talking about and think things like the PSO is perfectly calibrated magically; the post
I bet you think each chevron is 100m, too.
>>30534210
The Apex wood is awesome, I'm currently refinishing my Bulgarian set. The Romanian set taught me how to do it and it turned out great. It's a great little project to do for yourself over the weekend. Costs aren't too bad, just the wood plus all the shit you need to fix it up is about $100.
>>30535188
>tfw no reply
I feel like it should do a bit better than a range Roy but from Rob's tastings it seems very stable
>>30535612
My apex wood came in today. What do I do? I suck with wood but I'm gonna give this a shot.
>>30528154
Go with the RS mount and Primary Arms 1-6x
>>30536182
yours looks a lot better than mine.
I haven't started stripping it yet. Do you know how to refinish at all or do you mean what color am I going for?
>>30536288
What scope rings are those?
That's the setup I want, but I'm unsure what height rings to get.
>>30536288
> That tapco brake is shit.
Slant bake would look better imo
>>30536312
I have no experience with staining or refinishing at all. From what I gather I should chemical strip it. Then lightly sand. Then use clear shellac with rit dye. Thats all I know. What are you doing with yours?
>>30536497
Doing a Shellac this time, I did a wood stain I found at my hardware store so this time I'm going more authentic. I also didn't use tung oil, and I'll be trying that out for a clear shiny finish.
http://wasr-10.com/how-to-refinish-AK-furniture
this is a guide I used, there's a lot like them. Good luck with it, post your pictures when it's done.
>>30528820
they are too poor to issued the full ratnik
new cloth but old gun, old bayos and no electronic
>>30536554
Thanks anon. I'll let you know how it goes. I actually intend to put this on a Norinco but if it turns out nice enough maybe I'll get another set and put the handguards on my triangle folder slr-106.
What is the best optic for use on a 5.45 ak74?
>>30536803
What distances do you plan to train at?
> I vote aimpoint
AK-105 length cleaning rods for sale cheap
http://www.akfiles.com/forums/showthread.php?t=264838
>>30536803
ACOG with ACSS reticle. Deigned for use with 7N6
>>30536347
Primary arms 30mm rings (medium height)
>>30531712
Funfact: If you've ever purchased a US made production AK, even a parts gun, it uses a US made barrel.
>>30536364
Yeah it's shit. I want a dtk2
New to /akg/ but I'd like a question answered if possible.
Is the Century Arms Draco a good gun? Is a new one worth $500?
>>30531715
Actually, it's not. It'd dangerous to fire due to closing on a no-go guage.
>>30537985
As long as it's regular Draco and you inspect it first, yeah they're neat AK pistols. I prefer them over the Yugos since they can take regular furniture and have CHF chrome lined barrels.
>>30538142
I've never owned an ak-platform firearm before, what are things that I should look for specifically when inspecting it?
>>30538176
make sure the sights are aligned (Given that dracos combine the front sight and gas block, this should be less of an issue) Push on all the rivets, from every side you can. If anything attached to the front or rear trunnion moves, be very wary of it. If multiple trigger guard rivets are loose, they can be corrected, but can mean bad mag fitment.
As with all guns, check the bore.
Oh, and polish the shit out of the hammer. recent G2 hammer groups have been chewing up carriers.
My palette is so refined, I shit disdain for the uncultured.
>>30529085
>that canteen
So is that where Holy Water comes from?
>>30529229
Is that a Cuban Arms Manufacturing plant?
>>30529365
What did you use for the flashlight mount?
>>30529376
>Afghan 1.0 as fuck
>>30529555
I wish sportswarehouse wouldnt of sold outta those bags.... still kickin myself for not getting one even though they were $30.
