AK General /akg/
Shoulder Thing That Goes Up Edition
>Thread #9
Old thread here >>30464621
Asking again if anybody has any experience with TGI AK-74's
>>30478442
I've got one, it's a kit build that In Range did for them. It's been a solid gun.
I was supposed to be going innamountains to shoot but my wife got called in to work and now I'm stuck at home with the baby with nothing to do but watch Longmire and shitpost on /k/
>>30478304
That barrel shroud is sexy af desu
>>30478603
Take the baby shooting.
Who hunts with AKs in 5.45 or 7.62 or SKSs? Who's hunted with a semi-auto in 7.62x54R? Anyone with experience with advice for which one was best or most fun to use? Want to hunt eventually with AK, maybe with gorka or track suit for slav experience.
>>30478304
Can keymods be attached to this?
>>30478692
Indiana is allowing actual rifle calibers this year so I may hunt with my PSL if I can find some decent low grain soft points.
>>30478692
i hunt deer and coyotes with a gorka and an AKM. pretty fun desu senpai
When is enough ak?
>>30478304
Anybody know anything about Lee Armory's builds? Was thinking of getting an SLR-107 but that's not happening this year so I'm wanting a more traditional AKM style rifle.
>>30478913
You're not even close.
>>30478913
Is enough ak?
>>30478304
Sooo much want! Source
>>30478913
>>30478947
when you are closer to this, maybe
>>30478304
what years did century's qc suck more dick than a Kardashian I want to buy a Wsar but I want one with good qc
>>30479280
>12 in 7.62x39
>1 in 5.56/.223
Why no 5.45?
Type 3 reporting in
>>30479640
>>30479554
Nice I dig it
>>30479554
>>30479640
>>30478304
I'd consider an AK if I could buy one with this shroud.
>>30478703
not sure if serious
The answer is no
>>30478304
>shoot half a magazine
>need oven mitts
>>30479676
I've got a Nikon D5100 but I don't like dragging it out.
Good evening.
>>30478304
>Mfw i will never own that beauty, because of living in gercuckistan
I'm debating on changing the furniture on my AK to red wood and getting a nice tweed cap and an adidas track suit.
>>30479640
That receiver looks fucking beautiful!
>>30478913
what's that one in the middle?
>>30480183
It's a CNC Warrior receiver that's been blasted, parked, and cerakoted. It's a bit too new looking compared to the condition of the wood, but over time it'll look better with use.
>>30480237
Looks like maybe a Romanian SAR-1 or SAR-2?
>>30478304
>op's rifle
Question, I got an SLR-104 today and the sling mount on the stock is on the right side. Is there any way to just flip that around or no?
>>30478304
>Century-built AK with a silly front end, mostly (out of spec?) WASR-10 parts. Receiver and trunnion stampings were WASR/Cuigr. The shop I once worked for sold a dozen of these things, which we were told by our distributors were the only ones.This was in Spring 2009 IIRC, and they were briefly the cheapest AKs on GunBroker by about $300. Everybody we talked to was planning to cut off the silly nigh-ungrippable front end and return them to something like AK-standard configuration. Fit and finish were atrocious even by Century standards, and I personally wore out a lot of cleaning supplies preparing these for shipment. The short gas system seems to have been Krinkish parts grabbed at random out of a bucket and slapped onto standard-length AK barrel blanks with the gas port drilled for the short piston. They were a silly idea which went nowhere, and I never encountered anyone else selling them- they had the feel of "hold my Slivovitz and watch this!" toolroom proofs-of-concept. The sort of thing that would sell well for low-budget "Fallout" cosplay. At the time they shipped with sling and one of the then-new Tapco AK mags as pictured- if a buyer ended the auction with the "Buy It Now" we'd throw in two more steel mags and a two-slot Romanian carrier. As a project gun, they weren't bad. For an as-is shooter, they were suitable only for use at the Imperial Stormtrooper Marksmanship Academy.
Still looking for a semi auto AK-100 FCG.
Someone must have a connection. They shouldn't be as rare as translucent mags.
el angel rifle
>>30479280
>Day 42 the Kalashnikovs still do not realize i am a CZ
>>30480908
i have a few of those
Would anyone want to buy a Midwest Industries mount, Troy short rail with modular grip, or PA ACSS 1-6x scope? I got them as part of a package and don't want them
Just came across this on Faceshit and wanted to share
>>30478660
Too much work to drive, hike, and lug around a kid and guns and ammo while keeping a 4 month old baby happy
I might just go out on the 4th and skip all the festivities and have a day to myself out in the mountains all alone with my guns
>>30481027
OC but not slavshit
>>30478304
On the subject of shoulder things that go up, would it be worthwhile to attach a hook on a small frame to a soldier's pack so he can hang the SAW on the hook right near his shoulder?
Or would it not even help with the weight at all?
I figure it would help with some arm fatigue.
>>30478913What's that orange one, parts list?
>>30480796
No thats how its supposed to be. Look up a video on how to attach a sling to your rifle. it's meant to be that way for when you fold it over so you can sling it
>>30478692
I got my first deer with an ak
>>30478913
No.
Anyone here have any experience with DDI aks?
>>30481838
My mom won't buy one for me
>>30481863
Wut
Will the manticore triangle stock and stormwerkz hinge be all I need for my npap?
or do i need to get the krebs mount as well
So who's dick do I have to suck to get some 5.45 bakelites?
>>30482042
I know at least myself and VAfag have some Russia connection for baks
>>30481947
You will need the krebs adapter.
That's what the hinge attaches to.
>>30482094
thanks buddy
>>30482094
is the krebs already cut properly for the rivets on the stock? i don't know which adapter it was that didn't require you to dremel space for the rivets
>>30478692
7.62x54r Vepr is a Hog Holocauster.
Somewhat new to the AK world. What are some decent ammo choices for general shooting? What about to stash and keep for actually shooting threats?
>>30482130
Yes, it's got the relief cuts to accommodate the rivets in the NPAPs rear trunnion.
The first couple of runs of them did not have them and needed to be modified, but Krebs has since changed the design.
>>30482154
>>30478692
>tfw rifles with.308 projectiles, 54r, and x39 were all legalized in indiana for durr this year
Ive got so many choices in firearms that ive got no idea what to choose
>>30478692
5.45 isn't legal for hunting in a ton of states, it's .21 caliber.
>>30482273
fantastic thank you.
also to anyone else, where can i get straight copper (not bimetal jacket) ammo in x39
>>30482342
Depends on what youre hunting. Most states allow it for varmant hunting ad some allow it up to deer
>>30482466
Any word on true black molot 45rd mags?
Are 54r VEPRs the only ones left for sale because nobody's buying them?
>>30482544
I can get them, but not for cheaper than this guy has them:
http://www.akfiles.com/forums/showthread.php?t=269264&highlight=True+black
Probably your best option.
>>30480816
I like your information. Still want the ak though......because I'm weird
Whats the name of the dick foregrip for ak?
>>30481045
Well fuck that's pretty cool
>>30482627
Could be. When i got mine a while back they were selling fast. Now that 54r is more expensive than .308 theres not much reason to get the 54r version.
>>30482804
>54r is more expensive than .308
This makes me sad. I like 54r more.
>>30478913
Give me back my shoes anon, i need those.
>>30482804
I'm just hoping for $700 range x39 VEPRs again someday soonish.
I've given up on getting a Polish AK because they're already at 900 and only going up from there, which is just beyond me.
>>30483354
It's your lucky day.
http://www.k-var.com/shop/VPR-76239-01.html
>>30483354
>I'm just hoping for $700 range x39 VEPRs again someday soonish.
Uhhh, dude
http://www.k-var.com/shop/VPR-76239-02.html
>>30483386
>>30483387
>hive mind
>>30483387
>>30483386
... Well, shit. Have a non-fucked WW74 as thanks!
>>30483386
how hard is it to install a bullet guide?
just tap it? or nigger glue it like that guy in here
>tfw he bought a npap instead ;^l
>>30484315
You could weld it in if you wanted. JB Weld would honestly probably work. Or just buy the kit from Carolina shooters supply that comes with the drill bit, tap, screw, and guide. Just be careful not to break the tap (don't use a hand drill srs) and red loctite it when you're done and you're golden. The mechanical purpose of the bullet guide is really simple so it's not exactly precision work.
>>30484382
How do you go about selling/sending stuff out to people on here when they buy mags off you? Like taking shipping prices into account and all that.
Thinking of selling some of my bakes and some ak parts here and there to anons.
>>30484420
Make a burner email, have the interested party email you, reply with your PayPal email address and how much money you need, be sure to include specific instructions on how you want the money to be sent on PayPal, then USPS it. I usually just factor shipping into the cost, $6 covers it most of the time, if you want to be anal about it you could print off shipping labels from home that will tell you the exact shipping costs.
>>30484420
It was much easier before jewt removed the email field
>gone are the days of the blue names
>>30484439
>>30484457
Do you have your name and adress on the mail? I want to sell my shit to people here without them knowing my name or where I live.
>>30484464
Yep, everything I've ever sold has had my real name and return address. Keep in mind that you also have the recipient's real name and address. I guess you could put a fake return address but it's probably illegal or something.
>>30484462
that's airshit
>>30484531
stoooooopppppp
>>30484462
>fake zenit grip
>fake cz
>>30484522
I generally make USPS mad when people send shit to me under the name Rusty Shackleford. They seem to get angrier and more confused each time.
>>30484531
It ain't airshit.
But I'll tell ya what it is.
It is not 922r compliant.
>>30484531
I doubt airshitters would splurge for a useless aftermarket muzzle device
>>30484531
>>30484561
sure thing.
>>30479554
>>30479640
So... this is you?
http://www.akfiles.com/forums/showthread.php?t=269951
>>30484616
>giant ass screw right in the grip
maybe real, but goddamn is that an eyesore
>>30478692
I've dropped plenty of deer and hogs with my 7.62x54R VEPR
Also turned a coyote inside out one time. 54R is not to be fucked with.
>>30478881
What state tho.
>tfw Texasfag
>basically zero public land
>only way to hunt is to own land or be in the good graces of someone who does
>or crowd into a 100 acre public parcel with 30 other fudds.
>>30479554
>>30479640
How did it turn out? Looks beautiful, but what about the threads? Alignment?
How long was the turn around time? I was thinking of going through JBI but I just don't want to wait 4 months (thats the average from what I've been seeing on multiple threads)
Wish Troy from InRange was still doing builds. Or if DDI would do kit builds. That would be awesome.
>>30484551
>>30484566
>>30484593
>>30484616
The stock is airshit (http://www.evike.com/products/54706/)
Grip is for airshits (http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_Grips_and_Stocks_GBB_Asura_Dynamics_RK_3_AK_Pistol_Grip_for_AK_GBB_Series.htm)
I highly doubt he actually has a full auto ak, and you can tell it is select fire, from the selector scraping all the way down, i've seen that on most metal airshit ak's.
I've seen the foregrip on an airshit site before.
handguard is cheap chinese plastic for airshits, probably made by Jinggong (airshit company)
Airsofters will pay decent money for anything that will get rid of that god forsaken orange tip, see for yourself (http://www.evike.com/index.php?cPath=28_25_87&sort=3a&page=1)
As for that cz-75, it could easily be a .177 or .223 cal airgun, as those come with no orange tip, the grips are also compatible with the real ones, so like >>30484561 said, it could easily be airshit too.
Get fucked believerfags
Hello /akg/
Im not very familiar with AKs (i am an ar15 fag with an SKS and a Mosin Nagant.)
Do they make a modernized a-la ak 107 style AK on the civilian market? i do not mean bubba'd with aftermarket parts, but having features such as a bolt hold open and thumb accessible safety, or if possible milled receiver?
I am trying to find a gun for my brother who would do well with an AK from a maintenance and reliability perspective, but having fired a WASR says he hates the ergonomics of it
>>30484812
>and you can tell it is select fire, from the selector scraping all the way down
No bitch. Select fire AK's have 3 axis pins, and all the way down is always semi. Try being less of a fuckwit, and lurk moar.
>>30484822
Not in the US. We were about to get saiga 107's, but sanctions happened.
BTFO>>30484812
BTFO>>30484616
BTFO>>30484462
BTFO
T
F
O
>>30484841
if that is the case, then this guy is using airshit products on a real gun, which is even worse than just posting pics of airshits.
>>30484841
>Not in the US. We were about to get saiga 107's, but sanctions happened.
That sanction made me sadder than I ever have been when it comes to gats. I hope it gets lifted in the next couple of years. Maybe Hillary will get killed with a hammer, too. One can hope.
>>30484841
I've seen african warfare AK's with less scraping than that, but the airshit ones are made to scrape out of box, to lock into place better.
>>30484551
>>30484566
>>30484593
>>30484616
>>30484633
>>30484841
On top of what I already said in >>30484812 ,
even the charging handle is airshit. http://www.evike.com/products/53647/
>>30484841
>Not in the US. We were about to get saiga 107's, but sanctions happened.
so is there any way to build an AK with simillar features?
>>30484896
And the foregrip is the asura dynamics airsoft copy.
>>30484812
>>30484896
He actually put an aftermarket muzzle brake on airshit
>the absolute madman
>>30484857
You realize that zenit makes all that stuff on that AK - furniture, charging handle knob, and brake. Airshitters may copy it, but the legit stuff has existed for some time prior.
>>30484880
Fascinating. My AK got that scraped in a week. Some finishes are less durable than others. Some safety levers are tighter than others.
>>30484896
congrats, you found airsoft copies of real things. Prove they aren't actual Zenit products.
>>30484918
Not readily. You'd need a machine shop and reverse engineer or re-engineer the dual piston system.
>>30484951
Did more research, with markings, brands, etc., and the airshit copied stock doesn't have the cyrillic trademarks. at all. none. sorry for causing such a stir, I just saw something I knew a little about, and decided to jump on it. Although, the thought that it is airshit is kind of funny anyway.
Some local guy is wanting 120 for this furniture. Thinking about getting it for my Norinco BWK 92. Is this a decent price? Claims "genuine russian", for whatever that's worth.
>>30484951
>Not readily. You'd need a machine shop and reverse engineer or re-engineer the dual piston system.
fug.
any recomendations for AKs and accessories then? no wood need apply
>>30484988
That looks a little too blonde to be Russian, but I dunno.
>>30484988
That also seems mighty steep for wood furniture, especially for a Chinese gun.
>>30478603
I enjoy longmire damn good it made me really want a bronco
>>30484981
>>30484981
>I knew little about
Ftfy
>>30485080
>knew A little about
Ftfy
>>30484981
So you were making a shit fool of yourself for no goddamn reason?
>>30484989
Molot or Izzy grip, proper 74 brake, and check if Warsaw or NATO length fits you.
>>30485115
Nah, you meant it as you knew nothing about it
>>30485131
I legitimately thought it was airshit, because I had never seen the actual gear.
>>30485133
Don't fucking tell me what I meant, I know what the fuck I meant, and it wasn't whatever shit you are spouting out about now.
>>30485131
>Warsaw or NATO length fits you.
what does this refer to? I know litterally nothing about the civilian side of AK rifles
>>30478913
Ban assault hammers
>>30485148
You sure? I mean you just said you've never seen zentico furniture. So you said you knew nothing about it and decided to offer your opinion that it was airshit?
>>30485154
warsaw slav length stock
REAL NATO longer stock
>>30479280
What, no galil?
>>30485169
I was referring the fact that I know a little about airshit, and that I had never heard of the real zentico furniture. I offered my opinion it was airshit based on what I actually knew. I'm just surprised no one clicked the link and noticed the stock had no markings before I did.
>>30485148
Again, you made a shit fool of yourself for no real reason.
>>30485154
Warsaw is standard length, Nato is a bit longer (warsaw was made with coats in mind, Nato is good for lanky fuckers and giants)
>>30485180
You didn't offer your opinion, you spewed shit with zero understanding of the topic.
>>30485207
No, I had a reason, and the reason was that I had seen it on an airshit website before, and that was my original suspicion. In cased your dumb ass hasn't already noticed, me thinking it was airshit IS an opinion.
>>30485230
The dumbass who couldn't ascertain that "Zenit" wasn't slapped on because they thought the letters looked pretty together, think's I'm being stupid? You presented it as fact, rather than saying "looks like", "might be" "I think its", or you know, any other distinguishing phrase of any language to key everyone else in on something being presented as opinion.
>>30485266
Yet I corrected myself, and found proof, while you blindingly refused to believe it for a second, where as there is still a possibilty of it being airsoft, or real.
>>30485207
>>30485170
so when you get an AK here is it going to be an actual AK or is it going to be the ones that use the RPK recievers?
can we stfu about airshit
>>30485323
Say the word, I'm ready, lets just see if the other guy can shut up.
>>30485296
Because that picture has been around since the introduction of one of its components, and well before any company had time to push out copies.
>>30485313
It will use an RPK recievier if you buy a vepr or certain yugo models (or an AES-10b, which is a straight up semi RPK). otherwise, it's a standard 1mm sheet/ milled reciever.
>>30485313
??
nato and standard length stocks are interchanagle with ak rifle
rpk receiver aks are stuff like AES10 RPK/ NHM91 / VEPR rifles these are stronger but fuck heavy
>>30485344
>>30485355
ascending dubs
>>30484812
>>30484616
>>30484633
>>30484462
>airshitters still try to pass their airshit as real guns here even though this is how it ends everytime
>>30485323
>please stop making fun of me after I have been BTFO
>>30485040
Would you fuck off? We get it. You're new in town and want to make a reputation but jesus fucking christ you give shitty advice on things you know nothing about.
Nobody is impressed of your opinion that holds little value. Quit making such stupid, empty posts. You are not special.
>>30484812
>Get fucked believerfags
You didn't address the magazine chipping (all those bright dots), which airshit magazines can't do.
>>30485447
They make bakelite airshit mags, you can check for them yourself, im tired of posting links. and tired
>>30485464
>They make bakelite airshit mags
Not out of actual bakelite, dumbass. They're either solid orange/brown or purple plastic with no way for them to chip in a realistic way.
Sometimes you can swap airshit mag guts to real magazine shells. Maybe that asshat did that, but if I recall correctly that's really hard to do with bakes or plums.
>>30485527
swapping shells is easy with airsoft, as they are designed to fit in the real dimensions of a mag. That being said, I know there are cheap imitation wood and imitation bakelite, but there are actual bakelite airsoft magazines. I believe there is a company called MAG that sells them, and the OEM for a certain company sells a bakelite with one of their rifles, im sure you could find a direct way to buy those.
>>30485590
>as they are designed to fit in the real dimensions of a mag
Ehh... that really depends. What few I have left for my pidgeon flusher are fatter and longer than my WASR's mags.
>>30482466
Goddamn are those yours?
Any of your sources have access to affordable Vepr 12 mags? I wouldn't mind getting 4 to 5 factory 5 rounders depending on the price.
>>30485607
>>30485607
The mags i am talking about are 5.45 style mags, not 7.62. I know the 74 style ones are designed to fit into a casing, because I have seen the interiors of those, but I cant speak for the 47 style mags, although most are cross compatible in airsoft because there is no actual caliber difference.
>>30482466
Why the fuck do yours have that pulpwood look and mine don't?
>>30481085
>le slavshit meme
Cringe
>>30485629
Those are early glass filled polyamide.
The first iteration of bakelites, to my knowledge.
Rather rare, and quite expensive.
>>30485846
All the bakelites are glass fiber filled, it's the basis for the entire mag, It's glass fiber reinforced resin.
>>30485859
Correct. But those were the first go at it.
Thus the "pulpwood" look that other anon was referring to.
>>30481045
Where to buy?
Plum furniture makes me hard
Ak74 is coming in soon, is the Kobra 1S-03 from Kalinka good? Or have I played too much insurgency and should look elsewhere
>>30484639
Yes. Check out the detective work everyone!
>>30484803
Everything on it is perfect. I bought this one from him after he built it. It was a kit he had sitting on the shelf a while.
As far as turnaround time, if you're in a rush and aren't patient, don't use him. He'll tell you the same thing. They're a busy shop and they get things done as quick as they can while maintaining their quality standards. They're training a new guy so they should be up to a 3 man shop soon.
>>30486764
Why didn't you use a one of those Polish barrels?
>>30486929
Because I didn't build it. It was 95% done when I bought the rifle.
Also, I don't believe an AKM barrel has the correct profile for Type 3 stuff but I could be wrong. The barrel in mine is press fit (not thread in), but I'm not sure if the diameter is the same for the GB and FSB.
How expensive is non-steel 7.62x39? I'm thinking about getting an AK, but a lot of ranges around me turn away anything remotely magnetic, even if it's just bimetal jackets.
>>30487041
PPU and Fiocchi both make it for "decent" prices. $10.99/20 around here. Cabelas sells it and some local ranges. PPU makes an FMJ and SP load.
>>30478304
>tapco mag
ya blew it
>>30487041
Find yugo surplus
>>30482249
Golden Tiger 100%
>>30487591
Why you posting google search images?
How are the semi auto ppsh 7.62 tok pistols? Looks like polish part kit builds, are they any fun? Thought about making an sbr out of it
>>30487620
I'm the PPS43c? I hear they're alright if you get one cheap
>>30487620
Already had mine done. They are really fun, but don't expect anything too miraculous. There's no punch like a rifle, and the recoil is very long, if you know what I mean. My sight is also slightly drifted and needs adjusted, but the fucking drum won't move. So after 25 yards I'm shooting far to the right.
They are decently made, too. However the design has been complicated than the original and I expect to encounter issues some day. Overall, its fun and a neat collector piece, but there are other things worth 800$ that are better.
>>30485040
I can't even find any other photos online of the same wood. It seems steep but he claims it's "rare" ak74 furniture, but that means fuckall to me, though I like the color.
>>30485443
Holy fuck, sperg did your gf fuck Tyrone or something, chill the fuck out.
>>30486756
Anyone?
>>30487658
>>30487640
$450 too much for one with 3 mags in like new condition?
>>30487701
I'd buy it for that, especially if you plan on SBRing it
>>30479554
I forget, are the polish milled T3 or post T3 w/ a barrel pin?
>>30487727
Zasta where are you and where can I get a grenade launcher?
>>30487745
This one is a press in barrel with pin that's been welded over to hide it. But an original Polish Type 3 would be thread in.
>>30487627
Zasta could you help me find something?
>>30487747
Not my pictures sadly, and if you have enough money probably.
>>30487779
What are you looking for?
[email protected]
>>30487846
Knew it.
See
>>30487610
>>30485443
>but what if my goal is to entertain myself
>>30487674
That I can agree the color is nice, and if the set looks as good as the picture I'd buy it if that's what you want.
>>30487855
Just posting neat pictures I saved off vk
>>30487967
lewd, i can see her grip screw
neat, my things have been confirmed airshit and i've been btfo.
i'll just keep posting my fully 922r compliant airshit slr104 and vepr.
>>30485078
Yeah me too and it made me really want a 1911 with antler grips to CC under a leather jacket
I was very happy when Netflix announced they were gonna keep it going
>>30487893
He hasn't responded, fuck him. I think I'm just going to get a furniture set from Ironwood. Might do the akm style handguard with the swells. Anybody here with Ironwood furniture that can comment on fitment and quality?
>>30484315
I got the kit from carolina shooters. I did my whole conversion with a hand drill and a can of krylon. It's really easy. Would definitely recommend their drill bit and tap
>>30487727
Not instantly, but it seems really easy to do
>>30488013
>>30488049
I heard they are shit, get one of files or apex.
>>30487846
>[email protected]
Something rare.
Emailing you right biw
I have this Zastava. It has the grenade launcher and bayonet lug. However it's also stamped Century Arms, and had US Tapco parts.
Can anyone give me more insight as far as where it all came from or any dates?
>>30478304
There is a black line on the rear sight of my Bulgarian AK-74 build.
Is this intended to serve as a backup for a grenade sight?
It's on the left side of the rear sight, and it's not easy to remove. I don't know how the fuck they added it to the rear sight in the first place, a black line pretty coarse.
>>30488172
Has*
>>30488172
>>30488183
>>30488195
Century had a bunch of M70AB2 parts kits assembled by another company during the late 2000s. While they lack the bulged trunnion, they're still very sturdy rifles. It's fine.
>>30488013
>>30488062
I've always wondered if that was concrete or really ugly carpet
Threadly request for a picture of a triangle folder with a drum.
>Yes I am back and still unsatisfied.
Thank you in advance dear Anons
>>30488366
I can when I get home.
>>30488243
Ahh thank you.
So since it says Yugoslavia on it, some of the parts must be older, but it was assembled in the 2000s?
>>30488366
It doesn't work, I tried this
>4.5mm izhmash triangle
>slr107
Wasn't even that close to latching
>>30488373
Thank you Anon! Also have you ever tried to fold it with the drum on? Does it prevent locking?
>>30478947
>Is enough ak?
Props on getting your hands on a psl, but you're still severely lacking in calibers. Too much redundancy.
Need some 545, 556, 12ga, 308 if you can get some zastava styled more similarly to a psl.
>>30488406
Maybe early 2010s, but I remember those being everywhere around 2008-2009. Kinda wish I got one, but I opted for the WASR and it's held up for the past 6 years pretty well.
>>30488366
There weren't ever any drums for 5.45 built as far as I know (maybe built some prototypes or something but never any sigvificant production and never fielded) and triangle stocks were only on 5.45 rifles so it would have to be someone's build to put a triangle stock on a 7.62x39 rifle
>>30488366
>>30488452
I thought >>30466810 might be a 5.45 drum.
Anyhow, I still don't think the triangle would latch with it. The triangle on my 107 would hit the top of molot drum with the catch about 2" away from receiver.
>>30488452
Yeah the idea is I'd like to get an ak103 type rifle (as in 7,62 cuz it's all I can find in Finland but polymer furniture and triangle folder because I love the looks).
Like the arsenal slr-107FR.
And I'd like to see what it looks like with a drum for fun but I can't seem to find a picture of that anywhere, even with the stock unfolded!
>>30486756
Wondering the same. I am also looking at one.
>>30488315
lol it's concrete.
>>30488452
There are new polymer drums for 5.45.
>Bottom of pic
And of course the prototype pan drums
But neither has made it into the US as far as I know.
>>30488520
https://youtu.be/t6cRmDwwjUU
>>30487701
Its more than they used to be, but 450 is okay. I got mine with 4 mags and accessories for 400, so not far off.
>>30488116
Can you explain the differences to me a little more? How is it different from a standard 100 series trigger?
r8 the gun that im buying
just picked up my 63D this week
>metal stock is comfy in my shoulder
>my cheek was made to meld with it
>generally feels better to hold than my AR
guys, i think i have a conscript body ;_;
>>30488520
>I'd like to see what it looks like with a drum for fun
no odotahan hetki
>>30488609
-10/10 Literally paying for trash.
>>30488609
>American AK
Shit. Would you buy a Com-bloc AR? Then why would you buy an American AK?
>>30488630
He took the bait
>>30488630
>>30488631
nice meme
>>30478304
>PPSh barrel shroud
sauce plox
Are vepr 12s legal in cali after the new law?
>>30488218
>>30488218
Anyone else have an issued Bulgarian parts kit AK-74?
Look down irons and tell me if there is a black stripe down the rear iron sight.
>>30488631
>Would you buy a Com-bloc AR?
Fuck yeah.
Vepr15 would be great.
Sure wouldn't get a tRASh47 though.
>>30488602
I'll find out right now.
>>30488609
Save yourself the trouble and don't. Get a WASR instead.
>>30484951
Post pics of magwell w/ timestamp for proof
>>30488520
by >>30488627
>>30488621
cheeki breeki
>>30488692
what about a c39v2? my gun store doesnt have WASRs
>>30488714
lel buy what ever you want, just go somewhere else where your memes have to spoon fed
>>30488699
Fuck off
>>30488714
>c39V2
Based on what I have seen and read I would say they're a better bet than the RAS47. Worth looking into at any rate, but keep in mind it's going to be heavy compared to a WASR or RAS47.
Reposting this from QTDDTOT in case nobody answers there. It might be better suited for this thread anyways.
I'm looking to buy an AK receiver for a Polish underfolder kit, but there were some additional options available on Childers Guns. There was front trunnion holes, rear trunnion holes; fixed stock, double hook trigger cut, and reinforcement plate installed. Out of these which ones are necessary, helpful to have for a first time AK builder like myself, or completely unneeded? I'm going to assume rear trunnion holes are not needed because it said fixed stock and I'm buying an underfolder kit.
>>30488609
I smell bait
>>30488095
Just as you said that was on apex and saw "fair" condition 74 set in doo-doo brown. $25 fuck yeah. Ill just refinish them.
>>30488702
Kiitos paljon buddy!
Sight pictures anyone?
>>30488699
>>30488845
right because we should totally forget the rules of handling firearms, don't point your shit at something you don't intend to destroy.
>>30488823
Haha hell ya and now you don't have to worry about messing it up while shooting.
>>30488767
If you don't know, then you probably shouldn't be building an AK.
>>30488909
>Wtf happend to your rivets
Read #1 and #3
>>30488913
what if he intends to destroy the dog?