we summon CG edition
old thread >>30241411
>>30243672
>302
y r u lik this
So, has anyone ever had a problem feeding from windowed p-mags?
>>30243672
I'm in
>>30243672
Don't you dare summon that fucking waste of skin turbotard. Don't you fucking do it.
>>30243692
because it always triggers someone
>>30243705
Play nice, also slav shit showed up
>>30243672
Giddy is actually triggering me. I normally don't get triggered.
Buy some MPro7 bore cleaner and learn how to use it
>>30243658 #
Ok, so one wet patch with motor oil follower by one dry patch then one wet with rubbing alcohol and finally one dry patch.
>>30243727
>>30243719
Out of all the people on /arg/ I am pretty much the nicest.
And I can honestly say that I would thoroughly enjoy raping him in the mouth with a framing hammer for 30-40 minutes.
>>30243727
Just ignore him guys he's b8in
>>30243710
you think this is a fucking game
>>30243745
yes
>>30243672
Human sacrifice when
>>30243735
>>30243705
Bring it
>>30243727
I mean, you can use oil but it isn't going to break down any copper fouling. for best results:
run a few patches with hoppes
run a few dry
run a few hoppes/ copper brush
run a few dry
repeat until patches come out clean
>>30243754
We going to strap that fucker to a table saw set to a very low depth or what?
>>30243672
get the fuck off my board
>>30243782
i will summon him
>>30243782
this came in. install was easy.
pics monday when my muzzle device gets here (hopefully)
>>30243766
I don't pay attentions to trips enough to know who this guy is. So I am curious to see what happens. I want to see some epic shit posting.
did 4chan go down for a few minutes for any of you guys
>why does cat like chips and dip
>>30243827
Yes it did
>>30243808
He basically comes here and calls everyone who disagrees with him a retard, even though he does dumb shit like spray paint his BCG gold, and talks like a literal retard because he's deaf and types in ASL grammar.
He's either the worlds most successful troll, or literally a fucking R-Tard.
Rate me you /k/ucks
>>30243840
dont forget he did like...8 coats of paint on that BCG
>>30243845
Not the worst AR ever created. The aesthetic is shit but it appears functional.
>>30243845
what barrel
>>30243851
Oh yeah.
And people constantly fucking reply to him and shit, when I keep saying the solution is to ignore him. And people keep feeding the fire.
>>30243840
Oh shit he is the one who painted his BCG. Get him the fuck in here.
Is this clean?
>>30243732
There is 0, fucking 0, chance that alcohol will damage steel.
>>30243764
I already did the wet /dry patch and nylon brush with the kg12.
I just don'twant my barrel to rust.
>>30243860
what barrel did you end up getting
>>30243860
Best pics i can do
>>30243672
You fucking stop summoning cg (sigbro) you fucking cunt
>>30243867
LarRuse stealth.
>>30243874
get a proper bore solvent and save the brake cleaner for your fire control group, but make sure it's safe on your finishes
kys a1 plebs
I like how these fit ar mags like a glove but won't close with ak mags, witch is what they're made for
>>30243923
Kg12?
>>30243924
How many rare CGs do you have? :^)
>>30243963
I like you a little more every time you post that
>>30243945
I'm partial to hoppes brand stuff because that's what my old man used but anything reputable will work
>>30243993
this >>30243874
was after a bunch of scrubbing, alternating between brake cleaner, kg12, and patches.
i sure hope it's clean.
>>30243963
thats it kek. reading through the archive is p good though, hes a funny guy.
>tfw no /prg/ to ask questions in
this counts as a precision rifle
![WP_20160525_002[3].jpg](https://i.imgur.com/CMv2lLx.jpg "WP_20160525_002[3].jpg")
>>30243924
God struck his deaf, retarded ass down for posting such blaspheme.
>>30244026
>this counts as a precision rifle
>laughingsluts.jpg
>>30244003
I've heard of people plugging the end of the barrel and just letting the hoppes work for an hours or so
That would be about where I draw the line out of fear of fucking up my barrel
>>30243992
It'll be on the PTR someday though.
>>30244014
You need more. I can help. :^)
>>30244063
>free floater LARUE STEALTH barrel
literally all that matters.
>>30244086
this is fine to do. just plug the chamber so it doesn't get onto any aluminum. hoppes doesn't play well with it.
>>30244110
you can have it
>>30244121
Yea?
>>30244121
piece of fucking junk.
should have gotten a dpms.
>>30244130
Lord Jesus. What barrel is this?
>>30244128
yeah, $250 shipped +$50 cuckifornia tax
>>30244134
stealth, you fucking idiot.
>>30243810
but anon you said something really fucking stupid. own your stupidity.
>2oz EXTREMELY WRONG?. Please. I didn't know Nutnfancy was on /k/. I'll concede there are a couple lighter rails with absolutely nothing on them, but i'm not even remotely interested in spending 240-270 for absolutely no gain in functionality on this particular rifle. I'm not fretting about it.
>I'm not fretting about it.
That's not the same as being right you moron. You were objectively proven wrong. The only rails I could find that were heavier were the deprecated as fuck quad rails Daniel Defense hocks at the price ranges you listed above (ironic).
EVERY single one of those rails I posted are LIGHTER than the magpul rifle length MOE's (12 inches).
Some of them were LONGER than 12 inches and STILL lighter. A FAR cry from
>lighter than pretty much any rail of comparable length short of a carbon fiber tube
you insufferable rube.
>>30244142
Why the fuck is it doing that?
I was looking at the larue stealth barrels, is this common or am I missing something
>>30244142
so the stealth barrel is so hidden it cannot even see where the bullet goes wowee
>>30244150
just to rub it in your already dirty stupid face one more time...
i wouldn't be such a cunt right now but people like you piss me off. you're a dipshit who doesn't know how to say "i was wrong".
>>30244154
guess my barrel just doesn't like the TMK
>>30244163
Strange
>>30244154
get get a ba
>>30244171
i spent $1 to fuck up a $8 roll of tape.
>>30244163
>>30244173
or a rainier
>>30244173
Wot
>>30244184
I understand it sucks but leaving it there is kinda 'tarded
>>30244186
>>30244173
>less that 10rds
gtfo
>>30244194
ballistic advantage
>>30244201
have 8 :^
Anyone have any experience with 3 axis mills and have any advice on what works for DIY mills? Routers or actual motors with separated bit carrier and step down pulleys?
And can it be reasonably done for under $500?
I'm not talking a cnc mill though that would be epic, just a manual style 3 axis mill using a decent router and machining bits
>>30244194
Murphy's law
>>30244207
my 8 is better
>>30244219
try 9
>>30244207
What did you get?
How many doll hairs
>>30244219
Guess so
>22 years old
>growing pain
JUST
>>30244229
ok
>>30244186
which rainier is this m8?
>>30244241
hanson profile $230
>>30244250
what about 7
>>30244250
>>30244229
shit, that ones worse.
Ordered an AccuPower 3-9 today. How bad did I fuck up
>>30244267
i don't have any 7's, go fish
>>30244271
bad, should have gone us optics
>>30244271
er accu-point, the one with the tritium shit
>>30244267
Link pls
why does bcm think this is ok?
>>30244301
fucking google it
>>30244301
http://ballisticadvantage.com/16-inch-556-hanson-mid-cmv-performance-barrel.html
>>30244309
this desu. ya lazy bum
>>30244307
play with your dick, that's what i'm about to do
>>30244278
not impressed by the us optics
>>30244309
nice pube pattern
>>30244332
s&b
>>30244350
$$$$$$
>>30244309
No u
>>30244314
Many thanks
>>30244158
You're losing your shit over 2oz. Find a Xanax or end of a barrel. Nobody gives a shit.
>>30244332
name is ORBRO.
doesn't get a leupold
???
>>30244322
To what?
>>30244366
it was this or a VX-R
>>30244375
wut?
>>30244309
Magpul's VFG texture is worse.
>>30244428
What you beating it to
>>30244418
they are pretty much the same.
depends on what reticle you got. you pretty much pay for a name on what you bought and thats it.
>>30244429
I like BCMs FG texturing a lot
>>30244450
mil radian
but it's green not red
and I won't replace the batteries ever
and my price was 568 vs 449 (trijicon - leupold)
>>30244130
>giddy gives barrel away
>new owner has zero problems with it
I would love to see this tbqh
>>30244309
Pube tecture is best texture
>>30244154
Because he fucked with the gas port, overtorqued the MD, never cleaned it before shooting it, and owned it to start with.
>>30244500
Kek
>>30244201
>or a DPMS
>>30244482
for that price point, good.
just things like the ability to put any reticle in any leupold and larger eye relief are appealing to some people.
overall you got a good deal for the price point.
>>30244435
lesbian bdsm
>>30244493
>give barrel away
>new owner pics the best 5rd group
>claims that, that's what it does all day
i bought the fancy sled for a reason.
>>30244498
>>30244429
it's just really dirty
>>30244508
if you over lay them all, it's like 1.5"
>>30244544
But that'd be a 1.5" 40 shot group though. Which is still better than any of your 5-shot, 50 yard groups.
>>30244537
Is that your fucking can?
>>30244555
>50 yard groups
thats msd
>>30244510
yeah at full retail it's not worth I don't think
but 100$ more? I'll shell out for tritium
>>30244537
that's not your blast baffle is it?
turbulence at the blast baffle will fuck up your precision
>>30243840
Shut the fuck up george is great.
>>30244575
>44555
>that rear sight.
joke?
>>30244603
do you know what quick target acquisition is?
>>30244365
nah, 50% lighter is not "only 2oz"
>>30244418
What muzzle break is this?
>>30244537
>lesbian bdsm
I've always considered you a man of exquisite taste. :^)
>>30244555
i never said it was bad, dick licker
>>30244564
yes, a smurf jizzed in it
>>30244618
lol
>>30244620
weekend are special so i go exotic, my regular is just normal lesbian porn.
>>30244628
Figured you'd be salty about it, sorry.
>a smurf jizzed in it
Stop letting them use it as a fleshlight.
>>30244643
no, their jizz make the can quieter.
>>30244660
But also gayer and bluer. And probably less accurate.
>do you watch them do it?
>is your can cucking you?
>>30244628
I watched a guy grenade his Octane today.
>had it on a .300blk
>had an ammo can full of mixed rounds
>they weren't all subsonic
Most of us were laughing at him as he cried.
>>30244665
>And probably less accurate.
no
>>30244685
how sad, but why would he buy a .30cal can that can't handle proper 30cal loads.
>>30244692
Because it didn't happen
>>30244692
>>30244699
...the Octane is a pistol can. I think he had the 9mm version.
And it's specifically rated for *subsonic* .300blk, but not supersonic.
>>30244715
what an idiot
>>30244699
you know what else didn't happen? you killing yourself.
>>30244723
Yeah. Sucks he basically blew ~$1100 in suppressor, but at least the rifle looked okay.
Best part is, the RSO even asked ahead of time if all his rounds were subsonic and the guy basically went "lol I dunno #YOLO"
>then literally broke into tears when he realized what'd happened
![WP_20160604_013[1].jpg](https://i.imgur.com/tWkRTUn.jpg "WP_20160604_013[1].jpg")
>1k more rounds of Wolf Gold ordered
All the ammo I had left was loaded into my mags, started to have a panic attack.
>>30245010
Hope one of those rounds goes KB on you
>>30244742
silencerco warranties stupid at least once so he's good
>>30245112
Depending on how bad it is they might not be able to do anything.
IIRC they still can't fully replace the serial numbered part.
Which one of you nigs lives in Arizona and wants to go shooting?
>>30245196
the only people who willingly live in Arizona are old people who couldn't afford to go die in Florida
>>30245215
>Not living there for the most godly gun laws (or lack thereof) in all 50 states.
>>30244121
>>30244130
wow
it literally doesn't matter what you buy, everything you touch turns to shit
>>30244130
>>30244121
I think we're beyond the point of this being anything but user-error.
>>30243745
what you know about that J-tube???
Do you all check headspace? Do I need all three gauges or should I just get NO GO? Do you have a brand to recommend? Why the hell are these things like $50?
>>30245465
I'm pretty sure no one bothers to check head spacing
>>30245465
>Do you all check headspace?
Literally pointless for ARs unless you actually managed to get a barrel that didn't have the extension installed from the factory.
Any reflex sights you goys, i mean guys, would recommend?
>>30245465
i've got one
i never use it
>>30245465
Unless you're doing the chamber yourself they're pretty pointless. Current machining practices for AR's are standardized and repeatable enough that factory barrels will mate correctly with everybody's bolt well enough to not matter.
Keep in mind you have 5 thou of range of "ideal" headspace (0.002-0.007) and nearly 10 thou of "acceptable" headspace (0.0005-0.010)
>>30245495
>>30245487
So if I got a complete upper with BCG from Aero, any worries about headspace would probably be minimal?
>>30245493
PA-MDS, Comp-M[any], T1, T2, H1, H2, MRO
>b-but those aren't reflex sights!
Yes they are. They're not *holographic* though.
>b-but because of my g-goy comment I was fishing for a Mepro!
I know. They suck. So do Eotechs and all the airshit-tier Eotech knockoffs.
![WP_20160525_003[1].jpg](https://i.imgur.com/fnuUwwr.jpg "WP_20160525_003[1].jpg")
>>30245526
>worries about headspace would probably be minimal?
At the absolute worst.
>>30245526
If you got a complete upper WITHOUT BCG from Aero and literally found a BCG in the street any worries about headspace would be minimal.
Anything sold as a complete w/ BCG has been factory gauged with that specific bolt and there are *no* concerns about headspace.
>>30245495
>>30245494
>>30245487
>>30245474
thanks for the info
I guess if I see fucked up brass ejecting then I should evaluate the headspace.
I was warned about explosive gasses in the chamber if the headspace is off and that got my paranoia ringing.
My barrel is from BA and my BCG is Anderson MFG.
>>30245527
I'm actually not trying to meme in any way, just trying to learn. Why do Eotechs suck?
>>30245578
Any time they experience a significant temperature change in a short amount of time (+/- 40ish* F in under 8 hours) they can shift their zero as much as 8 MOA. Which is permanent. A lot of people claim "well in the civilian world this'll never happen" but that's literally going from an air-conditioned car to a sunny range everywhere in the continental United States from about May through September, or conversely going from a climate-controlled house to the range in the winter everywhere north of the Mason-Dixon line.
Their glass is comparatively fragile. Why they never bothered to use tempered glass when it's that large and that exposed I have no idea, but I've seen real Eotechs have their glass cracked by airsoft BB's. Meanwhile literally even the $60 PA basic microdot will take 12ga #7.5 trap loads to the glass point blank and not shatter (though generally they're not really usable afterwards), and the CompM2's and CompM4's have taken 7.62x39 rounds to the glass without breaking in Iraq and Afghanistan.
They're immensely expensive for what they are.
Their battery life ranges from abysmal (512, 552, 553 @ 350 hours of usable/500 to completely dead on the lowest visible) to bad (EXPS series @ 3200 hours of usable/4200 hours to completely dead on the lowest visible).
Any model predating the EXPS series would turn off under recoil because they couldn't figure out how to keep the batteries from slopping around in the battery compartment and losing contact. Many of these (552 and newer) are still in production.
Auto-shutoff feature that can't be overridden on any model.
>>30245625
To give an idea of how bad the zero-shifting is, 8 MOA at 300 yards is 2 feet. Most things worth shooting aren't 2 feet wide.
>>30245575
The most likely thing that'll happen with excess headspace is you'll get a case-head separation. Not dangerous to the user 99.999% of the time, but will ruin your range day as you'll then have to pound the case body out of the chamber with a tight-fitting cleaning rod.
Too little headspace (negative headspace) is more dangerous, as it could potentially cause an out-of-battery detonation. Those are dangerous.
>>30245631
To further expound on this, here's a hypothetical scenario
>it's July and you wanna go blast shit for the 4th
>you take your Eotech to the range, and can't hit shit because unbeknownst to you, the rapid but relatively minor temperature change going from your 68-70* home to the 90+* and sunny range shifted the zero 8 MOA
>you spend an hour dicking with it, either back in your vehicle or in a comfy shaded area/air conditioned clubhouse (because you're surely not retarded enough to stand in the sun), it cools off somewhat and shifts about another 4 MOA
>still can't hit shit with it, but you're shooting it again and it's in the sun again. Yep, another ~4 MOA shift in a random direction
>give up and go home
>the optic cools off going from the hot range back to the A/C'd house and shifts *another* 8 MOA
While this may be unlikely, it's possible. This is not true for literally any other optic of any kind of fame or repute.
>>30245682
It's too bad they are shit, I really like the way they look
Okay I have two questions, since I finally picked up some greentips the other day:
1, how many of you prefer 855 greentips over standard 193 ball ammo as a general rule?
2, is there any practical use where I'd definitely want the extra penetration from 855? I assume they're a poor choice for plinking coyotes compared to 193.
Has anyone else here installed their trigger guards by unconventional means?
I borrowed my friend's pin punch set but he only gave me roll-pin holders.
So I installed the thing using an old pin, a holder and allen keys. There's scuffing and shit around the pin hole but no ears snapped off and it's in there... All's well that ends well?
>>30245911
Punches suck ass, as I learned when I broke a lower trying this. Follow the advice that i followed the second time and use channel-lock pliers with masking tape wrapped around the teeth. The pins go in far easier and you won't need to worry about breaking shit.
>>30245915
>broke a lower
How the fuck did you do that
>>30245911
>>30245915
I just did this and I recommend using electrical tape instead of masking tape. I scratched my shit a bit using masking tape because it was putting holes in the tape. I was using vise grips though.
>>30245931
I've heard about people breaking the tabs where the trigger guard goes in because they were hitting too hard while installing the pin.
Just hit lightly and increase force a little until you find that sweet spot. You aren't forging steel here.
Has anyone used burris optics before? I've never used one but I'm not seeing too many bad reviews around and it could save me a bit of money.
>>30245943
I've generally just tapped roll pins in with my brass hammer until they go in snug
Except for that railed gas block.
Fuck that bitch
>>30245952
I tried that method with my gas block roll pin. Fucking thing shot across the room never to be found and I had to go buy them locally for too much money. I'll be using my vise grips for that from now on.
>>30245943
>>30245952
Yeah, most of those horror stories I hear are from people not supporting the ears those holes are drilled into. So long as the force has a medium to transfer to, and is touching the part it's fine to go firm on it.
But I will say these scratches are triggering my autism. It's urging me to build a new AR.
>>30245931
I have a special talent for accidentally breaking valuable items, it's almost supernatural!
>>30245960
That is unfortunate.
>>30245969
Paint the gun or find a black paint that's very close.
Show pic of scratches
>>30245982
Could have been worse. At least my local place had them. I had a detent spring fly across my patio and i had to order one. I don't like waiting.
>>30245969
It's suggested that you support that area when installing the trigger guard roll pin, but it can be done without support as long as you tap lightly and use lubricant. That goes for all roll pins. Just tap lightly.
>>30245995
The first time I tried to install the buffer tube catch, I unscrewed the buffer tube a little too much and that little bastard hit my forehead with enough force to break skin. That was my first lesson on wearing eye protection when installing parts. The little spring for the rear takedown pin was a bitch for me too for some reason. Luckily my beard caught it the few times it shot out.
>>30246015
That's the spring that shot out on me. I swapped out for the front one. However, I just now tried to put it in and the ones I ordered don't fit. Apparently this set of 3 that are supposed to be the ones for the two takedown pins and the selector switch detent are all just the ones for the switch detent. That's the last time I order this shit from amazon. More fucking waiting
>>30245995
Yeah that is lucky.
Turners either didn't have crush washers, or their sales guy was fucking retarded.
>>30246015
Kek
>>30246030
Primary Arms is who I order small parts from. They usually get your package out same day (M-F) and fast shipping.
http://www.primaryarms.com/small-parts/c/100601/
>>30246031
Yeah well now that these springs I had to order are wrong I'm just going to get an extra LPK that doesn't have an FCG or grip, pretty sure integrity has one. At least then I'll have some extra shit in case something goes wrong. I may get a fancy charging handle being as I still have that hundred bucks you wouldn't take from me lol.
>>30246063
Shit, thanks man. That'll save me some cash.
>>30245982
I don't have a picture of the scratches, but it's just scratched-off anodizing around the entrance to the pin hole. I'll probably just end up painting my gun anyway.
I just came across some free tulammo from my friend. About 100 ish rounds or so. Is it OK to shoot without fucking it up?
Are all stripped lowers created equal? Is paying for a rollmark worth double or triple the price?
>>30245625
>(+/- 40ish* F in under 8 hours)
>that's literally going from an air-conditioned car to a sunny range everywhere in the continental United States from about May through September
just pulling bullshit stats out your ass now? you realize what you just said was in the range of 30F-70F, 40F-80F or 50F-90F? Who fucking has their AC set to 30F, 40F? or 50F?
I live in Louisiana where temps will hit 100. Even if I set my AC to the lowest it will go, it still wont give a 40 degree delta swing that you're talking about.
>>30245625
>>30245682
Also, cowitness the fucking Eotech to your irons. It takes 1 second to flip them up and check the zero.
If you want to bash Eotechs dont use stupid bullshit like this, talk about the leaking seals and the delaminating collimator and holo grate. Otherwise you look like a dumbass.
>>30246171
What lower are you looking at?
For the most part they are all the same.
Just finished.
anyone have a good "suburban" camo paint scheme idea?
>>30244611
i know what that rear sight is.....
also you want max sight radius for irons, just fyi.
>>30246227
>>30246236
got a better template?
also i think some grey would help for concrete.
>>30246239
It's literally dicks
>>30246239
its going to take some practice and a couple tries at a few different techniques to find something you will like.
First watch youtube videos on creating camp, then get the colors you want, find some boxes and spray away until you figure out what you want.
What the fuck is this shit?
>>30246179
Anderson, blem psa, lgs has Spike double-dick lowers for $140.
>>30246270
Damn, is that 140 after tax and background check? My LGS has spikes lowers for 110 out the door.
It all depends on if you're worried about being a brand fag or not. If you're not, just get an Anderson. The lower just holds everything together. Do make sure it is at least made from 7075-T6 alum.
>>30245460
thats an NPA not a J tube ya dingus
>>30246286
Thanks for the input. I live in a marine town. Just like the auto dealership, the fun store charges whatever they want because they know dumbass boots will pay it.
>>30246070
Heh. I know PSA has some of the LPK's with no grip or fcg.
Pretty sure you can also order extra roll pins and such
so who's panic buying this morning?
>>30247243
forgot my trip after circle jerking in pol
>>30243727
Just piss in it and let it air dry
I know promag is shit but are there AR mags decent?
>>30247243
>already sitting on a good chunk of ammo, waiting on parts for next rifle to arrive
probably wont buy anything until things calm down again
Deadliest mass shooting in US history just occurred. Start buying.
>>30247281
what are you getting
>>30247291
fair enough. I might go shell out some cash on ammo since I don't have much.
>>30243926
Fluffy, link slavshit pouch pls
>>30243835
Yeah, see, i would have a problemdoing that since it fills the gap between the barrel and the flash hider with sand and shit
>>30247317
>what are you getting
Mags, ammo, MK18, 80% receivers, parts
>>30247322
there is no sand familam I do good job of cleaning
>>30247333
berry nice
>>30247317
I was gonna buy some lancer mags but I ended up spending a lot of dosh at the REI garage sale
>>30247380
where can i get smoke lancer mags?
>>30247243
>>30247251
why, this just help Trump win and he's not gonna ban shit.
>>30247307
Terrorist attack
>>30247391
rainier, tactical link, straight from lancer, midway, etc
>>30247391
Those are pretty rare right now. They come in waves every few months. If you do find them, expect to pay close to $20 a pop.
>>30247243
Not me.
IF DEAD CHILDREN DIDN'T DO IT, NOTHING WILL.
This will be labeled as a terrorist attack and muzzies will get 75% of the hate. Guns will be brought up but this is just another gallon of fuel towards destroying race relations in America.
>>30245493
I like my MRO, for what it's worth. Good field of view.
>>30247380
REI garage sale is a religious test for me. I've never lived anywhere with an REI so I would only go there when I would go one business trips to places that had them. Now that I have one 3 minutes from work its bad.
>>30247393
ehh I'm not sure about that. As much as I would like to MAGA. There are too many variables going into this. I don't think its going to be a blow out like we want.
>file name related
>>30245465
If you're worried about it, you "need" all three. But getting a bad headspace problem is one of those " one in a million ". things. There was one guy that got a barrel with an unfinished chamber though.
>>30247460
its rough. I got there at 730 yesterday and was only 8th in line, not bad.
problem is with garage sales is people like the couple in front of me go and clear out like, every tent and sleeping bag and sit on them until they decide what they want, so you have to wait for them to decide.
ended up getting a boss sleeping pad for about 45% off MSRP in what appears to be brand new condition, a diamondback headlamp that was about 30% off MSRP, and a lot of other camping odds and ends. not a bad haul. gf got an osprey pack on the cheap.
>>30247411
>>30247421
thanks i've been putting off grabbin a few for the inevitable happening, i figure why not now lol
>>30247506
nice, osprey packs are good stuff. I always go and most of the time its cleared out because of
>PNW Leaf Eating hippies
I mainly go looking for Mountain Bike Stuff or general camping odds and ends. Most of the time its all been cleared out.
>>30247569
i might have to check this out. theres an rei not too far from me.
>>30247580
yeah if you buy their membership card (which is really worth it) you get access to these sales.
>>30247569
same shit here, everything gets bumrushed and picked over. I go to one in the suburbs because people buy a lot of high dollar gear and return it, yet there arent that many shoppers compared to other more urban/college town stores.
>>30247580
garage sale may have already happened at your local store, you can look it up tho
>>30246268
Looks mexican to me
>>30247547
It's disgusting that these mass shootings happen right on time before the election really starts heating up. I bet another one even more deplorable happens around the start of Fall to really hammer home $hillerys gun control stance.
>>30246268
You can do better.
>>30247411
>>30247421
>>30247636
btw taclink has them for 18 bucks, cheaper than lancer themselves and rainier is out.
and yeah.... it's election year for sure.
>>30247602
i meant checking it out in the future. i dont think ive ever even stopped in before, i just figured there stuff was too much money (especially since i dont have a card)
PSA is sold out of 30rd mags.
>>30247654
Can i get some fuzzy dice hanging from the gas block with that?
>>30247688
somethings are pretty exorbitant (see: $400 sleeping bags, $500 coats, $100 for a pair of fucking socks) but others are affordable, REI brand gear is gtg and is almost always cheaper than anything else but just a step down in quality from brands like north face, marmot, patagucci, etc. they also have mountain house food thats like $6-8 for two servings, head lamps, survival stuff and other good innawoods/ /k/ related things
>>30247673
good looking out.
I was going to get my Dad some Lancer mags for his .300 blk build for Fathers Day.
>>30246235
No, I want quick target acquisition
>>30247701
BUT-BUT-BUT I THOUGHT M-MUSLIMS LIKE GAY PEOPLE?
>tfw just bought a bunch of 30rd mags yesterday going to buy more today
>>30247701
Didn't mean to tag you
Are troy battlemags GTG?
>>30243698
Only mags I ever have had a problem with are Brownell's without anti tilt follower
>>30247749
tru
>>30247798
FUCK NO.
i have a green one, you want it?
>>30247798
When PMAGs, Lancers, and GIs with proper followers exist, why buy anything else?
>>30247748
I have a card but have never gone to a sale. Might go to next one, I need a new sleeping bag
>>30247830
price, scarcity
Does anyone know where I can find GI mags for less than $8?
>all that hiv blood in the club
I hope the officers are wearing good ppe
>>30247876
PSA
>>30247876
Psa, but they literally just sold out
>>30247886
>PSA
see >>30247696
>>30247840
good luck sandal wearers here are like gibmedats when it comes to their outdoor items. get there early and you should be good. the two I have been to have been barren by the time I got there around mid day.
Anyone have experience with South Korean polymer mags?
>>30247853
$10 is too much? I mean, the internet is a big place and e-commerce is not a new concept.
http://www.manventureoutpost.com/products/Magpul-Industries-Mag-PMAG-223-Rem-556NATO-30Rd-Black-AR-Rifles-MAG571%252dBLK.html
>>30247840
never had much luck with sleeping bags at the garage sales, im waiting on a north face one to go on sale, or ill use my dividend on it i guess
i seem to only see two season bags at the garage sale
>you dont even need a sleeping bag in most the spring or fall and all of summer
>>30247895
kek I will go early
>>30247911
>need
pls m8. I don't know shit about sleeping bags but I know the one I have now is crap
>>30247939
>memes
spend your money on a good sleeping pad and a blanket. takes up less space
$9 PMAGs, $10 shipping
https://lanbosarmory.com/index.php?main_page=product_info&products_id=15881
>>30247963
>carrying two things instead of one
no thanks bb
what should I panic buy mags or ammunition
>>30248001
Mags first , then ammo
>>30247994
>using only a sleeping bag on the ground and expecting to be warm
have you ever even camped in cold weather
