dogger edition
old thread >>30099035
>>30105392
in
https://www.youtube.com/watch?v=hA2S4mhfdQQ
>>30105413
kys
>>30105413
>>30102353
I went shooting and didn't take any photos.
Got a free 5.11 flashlight from work.
>TPT L.2
Anybody know if it's worth a shit?
Is it something that could be ring-mounted as a weaponlight?
>>30105454
Fug.
Pic related
1/7 or 1/9
I am mostly going to be shooting 55gr and occasionally 62gr m855/ss109
I am seeing varying opinions on twist rate on the internet from not mattering that much compared to ammo to being the most important thing about your gun.
>>30105466
1:8.
letsgo or olyanon are ya here?
>>30105475
Please explain why
>>30105497
basically.
>>30105497
Best twist rate for 55 to 62gr stabilization?
The only reason the military went with 1/7 is to stabilize the tracers.
>>30105466
1:8 is the most versatile (40gr flat-base varmint bullets to 77gr match bullets with good accuracy) but has the worst barrel selection.
1:9 will do 36gr-69gr and some 75gr bullets with good accuracy and will stabilize the 77gr bullets, but isn't really ideal for them. Usually only found in cheap barrels though.
1:7 has the best barrel selection ("muh milspec") but is actually a little too fast for most bullets. If you intend to shoot M856 tracers or 62gr+ exclusively it's a good choice, but will stabilize 50gr flat-base bullets/52gr boattail bullets on up to anything short enough to fit in a mag. Barrels run the gamut on quality and are extremely widely available at all price points (again, muh milspec).
>>30105497
Ideal twist rate for AR-appropriate plinking, hunting/fighting, and match bullets and will still do most varmint bullets well enough. Usually only found in mid-high to high end barrels, very few cheapshit or junk barrels available in it.
>>30105508
>going to be shooting 55-62
>use the twist optimized for 62-77
>source MS paint
>>30105515
My understanding was that it's because they don't shoot 55gr anymore
>Best twist rate for 55 to 62gr stabilization?
Do you have some evidence?
>>30105516
So if I want a good barrel I have to select the meh tier twistrate for the ammunition I will be using?
>>30105497
>>30105508
>>30105515
>>30105516
Reminder that overstabilization is a massive meme and barrel manufacturers are trying to jew you.
1/6 twist(yes it exists) still fails to "overastabilize" 55g rounds.
1/7 is the best twist rate
>>30105553
I just went to the Port Charlotte gun show and some guy in a fedora told me that 1/7 are bad at stabilizing 55gr and that the best twist rate is 1/9 for general purposes.
Will 1/7 stabilize 55gr-62 gr as well as 1/9?
>>30105576
my 1/7 shoots 55g really well
>>30105576
1/7 will stabilize anything you could conceivably fire out of an AR in 5.56 chambering.
Even 80+ grain spotting rounds
>>30105576
No. 1/7 generally likes heavy bullets
>>30105588
This is just simply incorrect though, it can accept heavy bullets but it doesn't "like" them more so than 55g rounds.
Most heavy rounds are "match" rated and are more consistent than M193/M855, leading to that misconception.
>>30105551
Nah. The M856 tracer is retardedly long for its weight (as well as having a shit SD since it's not actually lead-cored) and doesn't stabilize well in slower twists. 1:8 will stabilize it but accuracy is dogshit, and 1:9 won't stabilize it. Since 1:7 does stabilize both it and M855 (and mk318 and mk262, though those are newer) with good accuracy it was a good fit for .mil use.
Also, no. There's plenty of good barrels available in 1:8, it's just that not every little tactical store ever has their own store-brand barrel in it. DD, Faxon, Ballistic Advantage/Aero, Black Hole Weaponry, Larue, Noveske, and a few others make barrels in it.
>>30105587
Wont stabilize my 40gr Varmageddons or 36gr Varmint Grenades, so fuck you.
>>30105585
>>30105587
>>30105588
Also how big of a difference is this going to make?
I really just want to be able to shoot chest sized targets out to 300 yards with 55-62gr and want a good quality barrel with a long service life.
More precise shooting would be fun but I could build a different upper for competition or precision shooting.
>>30105610
Here's the kicker: Unless you're trying to shoot something wildly inappropriate (90gr VLD's single-loaded, or 32gr gopher grenades), it makes very very little difference to anybody other than competition benchrest shooters.
>>30105553
Agreed that it is vastly overblown, but an "overstabilized" bullet hurts its BC. Depending on how overstabilized, it can hurt it rather massively. Rarely effects actual accuracy though.
>>30105608
Its not that it isn't stabilizing them, its that those are horribly unstable rounds in flight because of their weight and speed.
Next time you shoot them go check if they are keyholing, if they aren't then its just the rounds being inconsistent and not liking your barrel.
>>30105628
They keyhole. Trust me, I shoot a lot of them through an actual varmint AR (1:12 twist) and they're quite accurate. They're also handloads. I know what I'm doing.
>>30105638
Alright well I'd like to amend what I previously stated, 1/7 is good for 55g and up.
>>30105661
But is it better for 55-62 than 1/9?
I don't have any intentions of shooting anything heavier than 62gr or lighter than 55gr through a 5.56 upper
BCM KMR or Aero Precision Enhanced Keymod?
New pic, moved the scope back but I think I like it. Anybody got any suggestions for a picatinny 45* mrds mount?
>>30105674
I think 1:9 would be the best fit for those.
>>30105676
http://www.groundzeroprecision.com/collections/free-float-handguards/products/15-super-ultra-slim-keymod-ar-15-free-float-rail?variant=5427148737
>>30105674
Well if you're really seriously never ever going to shoot anything heavier than 62 grain, then 1/9 would work just as well as 1/8 or 1/7.
You'd just be setting a hard cap on what you could accurately shoot, which eventually might bite you in the ass.
Do you get more stabilization from a longer barrel of the same twist?
>>30105676
Do you like skinny or fat rails?
>>30105707
Alright, so realistically how big of a difference would I see using the same ammunition through a 19/ or a 1/7?
If it's negligible I would just go for the 1/7 and preserve the capability to shoot heavier things if the need arose.
If it's a considerable difference why should I handicap myself on the ammo I will be shooting the most?
>>30105684
I don't like the way your rifle looks im sorry
>>30105732
Indirectly, yes. Up to a point.
Faster bullets need less stabilization, so a 10" barrel will stabilize an M193 clone load less than a 20" barrel.
>>30105742
Very minor. Not quite what I'd consider negligible, but certainly nothing to seriously worry about.
>>30105742
How far are you going to be shooting?
Is this an SPR that you're taking out to 600 yards or a red got rifle that you're most likely never going to shoot past 200 yards with?
>>30105754
She is a hefty pig. The bipod is qd, and ad usual she needs some paint.
What else don't you like about it though?
Outdated?
Also I am going to sbr the lower and do a mk18 upper too. Maybe clone shit is nor your thing.
>>30105684
Larue tactical.
http://frontierfirearms.ca/firearms/black-rifles/colt-le-sa-rifle-5-56x45mm-nato-20-bbl.html
What do you guys think of this rifle for babys first ar? Ive been looking around and this is in the right price range. Im not sure i want to build my own yet, that will come later. Anybody have an opinion on it?
>>30105761
>Very minor.
That's what videos like
https://www.youtube.com/watch?v=zSnXl_wnNAk
Show, but what would these results look like at 300 yards?
My father and I are arguing and he is saying that 100 yards is nothing, once you get out to 300-500 they will vary wildly or tumble midair
>>30105773
I am thinking 300 yards and in, MAYBE 400 if I need to stretch it but if I am shooting over 300 I would prefer a boltgun/battle rifle.
>>30105676
>mlok
>>30105799
How much did you pay for your ATPIAL?
>>30105799
I do have a Low Larue mount for it, but that's for the Scr and was a hair low for a standard AR.
Purdy gat there man.
>>30105392
Nice dog Jamal.
>>30105807
As in, they'll both work just fine.
I have 4 different twist rates in AR's--1:12, 1:9, 1:8, and 1:7. The only ammo I can't shoot sub-5" groups at 300 yards with are my two very light varmint bullets (40gr Varmageddon FB non-tipped and 36gr Varmint Grenade FB non-tipped), and only through the 1:7, and my 77gr SMK/mk262 clones through the 1:12. I've shot 68gr "heavy match" Black Hills reman through the 1:12 with acceptable accuracy even.
>>30105865
Kek I was going to comment on the nigger dog too
looks like a good boy tbqhwyf
>>30105799
Misdunderstood.
I'll have to see of they have a Doctor/Fast Fire style mounts.
>>30105799
Nice 20 lb rifle.
>>30105792
>clone not my thing
Probably.
Would suck u off for scope/mount combo
>>30105799
Yo what mount is the red dot sitting on
>>30105879
This post makes it sound like twistrate is vastly overblown in importance outside of very specific instances.
In that case what rate would you recommend for someone that just wants one 16 inch 5.56 upper?
>>30105900
I hear you. I got a knights build on progress and a couple other builds. So now I'm in to clones for now....
Might do a lightweight build soon though.
>>30105912
Same as I did 30 fucking posts ago: 1:8.
1:8 best twist rate
>>30105835
like 3k.
>>30105885
buy an offset picatinny rail then.
>>30105905
http://www.larue.com/angled-cqb-mount-micro-t-1-lt724
>>30105888
it was like 11 pounds.
stay dry pupper.
>>30105361
Or I'll buy a more flexible 2016 handguard that fits more than one gas block, isn't paper thin, doesn't gall and doesn't have the diameter of a baseball bat grip.
>>30105967
At least you're left handed. Southpaws unite.
>>30105979
>more than one gas block
what shit gas block are you buying that cant fit under a KMR?
>>30105995
dunno where you got that info. I'm a righty.
>>30105995
troy handguards are so uggo
>>30106001
Why would your offset sight be to the right of the rifle if you're right handed? That makes zero sense.
>>30106005
You're uggo.
>>30105967
The one is this pic looks like a different mount, I'd prefer just a short angled rail section
https://www.youtube.com/watch?v=5CXu0nh-iD4&spfreload=10
>>30106022
my mom says im handsome
http://faxonfirearms.com/16-govt-socom-5-56-nato-mid-length-4150-qpq/
Anybody know anything about faxon?
>>30105734
Fat
>>30106022
>Why would your offset sight be to the right of the rifle if you're right handed? That makes zero sense.
wat, it makes perfect sense
>>30106059
If you are right handed, your head is on the left side of the rifle. In order to see his offset red dot, he would have to move his head on the opposite side of the rifle from where it normally is.
How does that make sense at all?
>>30106076
you just move it offset m8. r u memein me?
>>30106076
All a right handed shooter does is tilt the rifle left. Right eye then is in line with optic
>>30106076
Are you stupid?
>>30106076
go to 1:20 then kys lmao
https://www.youtube.com/watch?v=JF_cBpMg4IU
>>30106123
This picture explains >>30106117 statement. This I now understand. Still it does throw someone off if they have never used 45' sights before.
I'm holding my rifle now and if I wanted to look at a dot mounted 45' on the same side as my head, all I have to do is look in a slightly different spot... no rifle tilt needed.
>>30105487
yah i'm finally on here. I was up in marysville/tulalip today got new discover pass and a little bit of ammo.
Quick question does this range have a known 25M line?
>>30106022
>That makes zero sense.
you tilt the rifle to the left and keep your cheek weld the same thats why.
>>30106034
thats because it is, and thats exactly what it is.
that ones a daniel defense offset picatinny rail.
>>30106343
>DD mount
there we go, thanks.
>>30106181
By tilting the rifle you bring the red dot into standard vertical over bore alignment for offset shot holds at close range and the cheek weld remains the same. Good benefits for a shooter already accustomed to the rifle and looking to simply add a red dot in addition to a magnified optic.
>>30106181
>all I have to do is look in a slightly different spot... no rifle tilt needed.
except you'd have to drop your head a bit since you can see here >>30105967
it sits lower than the standard height for Irons/optics eyepiece
Impatient as hell edition when?
What does ARG think of C-More red dots?
>>30106305
no it does not. i have enough posts to hold each torso individually if ya wanted to do drills or something or i can bring enough to hold them all at the same distance side by side. what do you want to do?
>>30106181
you are over thinking it
>>30106450
im down for what ever. Ill bring my tape measure to measure out 25 meters then. ok ill see if i have some masking tape to patch up the holes we make.
>>30106501
Cool. You said ya have a staple gun too? I'm out of staples
>>30106435
tfw you just crossed 1k on your build and you still have a LONG way to go
>>30106544
>mega billet set
Nice
>>30106076
Wew lad
>>30105392
>not new phone edition
>>30106568
I'm on here now, do we need anything else for tomorrow?
I've got my 12" gong and some clays for targets also a few paper I can bring. Going to see if I can snag a small fold up table to bring.
>>30106709
What phone?
>>30106435
Anyone have experience with the UBR, before I go grab a torque wrench, it looks like the receiver extension just stops when I'm hand tightening it. Is it safe to assume that it's good at that point? I know its aluminum and I don't want to go at it more
>>30106729
I was just wondering if you guys wanted to do drills with the torsos or not cause that will decide on what wood I bring to hold them.
I have a small table I can bring, just will be a bitch carrying everything
Does anyone make depleted uranium 5.56?
>>30105392
BREED OF PEACE
>>30106763
meh, if it's a bitch to carry the wood forget it.
Going to be a bitch for the steel and all the other normal stuff
>>30106735
S7, still trying to figure it out.
Phone doesn't have a resize option, had to download an app.
>>30106520
I do but I can't find my extra staples. I have about 20 in the gun right now. I am tearing my garage apart looking for them right now.
>>30106822
the camera has options for that in the settings. there is crop and resize somewhere.
>>30106817
nah the wood is fine. Just two extra poles depending on drills or not
>>30106822
gay
>>30106833
np I can get some.
>>30106845
Can't find it
>>30106847
It's not too bad
Well see tomorrow
>>30105799
How well does the battle comp work for flash suppression?
>>30106847
Alright, I'm cool with it either way. If you want to pack them, then I'll be down to help carry anything.
Im the king of the castle and you're the dirty rascal!
>>30105799
>>30105684
Spuhr makes it pretty sexy mount
>>30106925
>>30105684
>>30105799
Wrong Photo but it turned out Ok
>>30106890
Sounds good
In for contemplating wacky bats suicide :^)
>>30106869
according to vurwaapen not very good.
I never tested it personally but I run a surefire muzzle brake so I never really care for flash suppression
>>30106925
>>30106940
they really do, Once I get the money I'm ordering a Spuhr mount for my NF 2.5-10x24 and will probably do something similar.
What is the maximum effective range for 5.56 out of a 16 inch barrel?
when does 5.56 start to shit the bed and lose too much energy to kill people?
>>30106993
About 500 meters is the max you are going to get in terms of combat effectiveness.
>>30107002
I'd say you could do 600 with mk262 and consider it still effective.
>>30107018
That's true. I was remembering the charts for M855. My bad.
>>30106847
ok i'll bring mine JIC
>>30106965
huh?
>>30106983
I Talked to Spuhr last week
The SP-3602 and SP-3616, SP-3016
Will come out with a QD version but it will cost ~430$ if you want to wait.
They won't make a SP-3601 30 mm QD so im ordering the normal SP-3601 30 mm 20moa in a few months to get my FNAR setup
probably getting a Brügger & Thomet muzzle break for it aswell and later the suppressor.
>>30107035
The unit of people I am with for wacky bats chose some dude who just came back to the unit after he left for a few years to do an NCO type position job in leading people. After they knew that I want to do it, and I'm qualified, and that I would be good at it. I don't know why, but now I'm just going to resent all of them even though they are my friends. We were doing drills earlier in marching people around the field, and he had a fucking cheat sheet for the commands in his hand, and still couldn't fucking do them right. I know them all by memory and could have shit on him. They chose him purely because he's their fucking buddy and he's been around a little longer than me. I'm leaving the unit at the end of this year most likely, because move up or move out.
Still so fucking pissed. I'm not even mad at the guy he chose, I'm mad at the people who chose him. One even gave me the "You have to prove you're dedicated to helping the unit" and shit schpeel, and I've been around doing everything I can for 3 years now, and this fuckstain gets to come back and do cool shit.
Thank god the real Army doesn't give me reasons to resent people :^)
>>30105413
Needs a better song. Also would be nice if someone had a high speed cam and could track the thing.
https://youtu.be/KF32DRg9opA
>auto takes better pics
>>30107080
oh larping stuff got it
>tfw I leave in 2 days
Oh boy. At least AF Field Training is short as shit.
>>30107156
Yeah. I got you.
>>30107060
did they give a timeline?
I'm willing to wait for QD since I prefer it.
>>30107192
you are a .milfag?
>>30107227
no real time line but i've heard 4months from now.
but i think that's just a guessing game
End of 2016
>>30107229
even worse. ROTC fag
>>30107080
Have you tried strangling him? I hear its only a year ban.
>>30107262
Only in Florida. kek
>>30107257
ahh collegeboi
>>30107251
not bad, I mean worst case I order a non QD model that'll eventually work onto my Tikka plans
>>30107271
indeed
>>30106058
Then don't get the KMR, it's skinny AF.
>>30107273
that will work.
Aimpoint pro looks pretty neat mounted on the top of the mount / scope
>muh twist rates
>>30107339
think you mean a T1, PRO would be huge on there. but yeah thats a good option if you have lower turrets
Sup /K/ I'm working on my first ever AR15 pistol build
I just put some parts together to see what it would kinda look like I don't have the tools to put it all together yet
Remember everyone. 5-10 minutes a day of dry fire practice will make you a better shooter faster than anything else.
>>30105392
>whitetrash alert
>>30107392
Ye micro*
>>30107482
How do you like the UBR strike plate? Also +1 for GOAT removed storage panel aesthetic
>>30107477
sound the alarms!
>>30107392
considering a t1 offset on this even though it has target turrets
>>30107515
That's okay, I like your doggo m8
Do you guys loctite your BUIS? The mbus pro fits up there pretty darn snug
>>30105392
So I just put together a new build with some spare parts and some new parts. Took it to the range and put 300 rounds through it pretty quickly. Flawless performance but it got hot as a mother fucker. Even through my Kevlar backed gloves.
So now I am thinking I should either invest in rail covers, a fore grip of some type, or both. Using a MI SS Mlok rail. Suggestions?
>>30107531
you have a nice dogger too m8
>>30107553
no
>>30106544
>tfw just spent ~$1100 on parts for a full rifle including an MRO
granted I already have a BCG for it
>>30107592
parts list por favor? I think my problem is that my tastes outweigh my wallet
>>30107559
it depends on how you like to shoot, I'm most comfortable using a vertical foregrip as a hand stop, and on my second build I'm going to try a magpul hand stop and see how it works out for me. If you hold your rifle "vanilla" just grab some of magpuls rail covers
>>30107615
Type 1's or Type 2's? The T1's look like they dont do jack shit.
>>30105392
my bolt catch quit working after about 100 rounds. is it worth the money to buy a badger or are they just a meme?
What would you do if SBRs were suddenly no longer NFA?
I would probably buy a Colt 6921 with the nerer heavy barrels.
>>30107689
The Type 2s are much better if you are looking for something grippy. If you just want a little bit of accent rubber the Type 1s are fine, and help keep the heat off of your hands a fair amount for their size.
>>30107689
I would go with type 2s, the type 1s look silly, but having actually held them on some rifles they aren't as bad as they look
r8 mine
>>30107726
.50 beowulf with a 4" barrel.
>>30107523
I'd recommend what I did here
>>30106415
Larue also makes a seperate ring (for the RMR at least) that you can do something similar to the Spuhr style where its offset on the scope itself.
>>30106940
>>30107615
your problem is the mega set
>>30107743
and a belt fed upper.
>>30107615
It's all aero parts, kinda want to see how it stacks up vs. the more expensive stuff I have.
>aero lower
>aero lpk and buffer tube/spring/buffer
>B5 furniture
>aero 16" CMV midlength barrel (supposed to be good, some dude tested one to 1 MOA when new, that's good enough)
>aero enhanced 15" MLOK rail
>milspec CH
>MI BCG I have in one of my rifles, about to get replaced by a cryptic
>A2 birdcage
>Trijicon MRO
>magpul pro's
I'm keeping it basic and relatively cheap because I'm building it for my gf. I'll change things as she gets to know the AR platform and figures out what she likes.
>>30107744
I think I'm going to go with the T1 ring mount. The 45 degree won't fit underneath my mount so I'd have to mount it to the hand guard.
Ring mount then gives me the choice to turn it how I want.
http://www.larue.com/aimpoint-micro-t-1-ring-mount
>>30107752
You know its the nicest looking rollmark senpai
>>30107775
and an aero upper. Aero upper and lower are forged and pretty cheap
best dogger
>>30107776
that's a good looking rifle anon
>>30107775
>>30107783
Aero is probably best bang for your buck as far as manufacturing goes. I don't think anyone would argue that for the normal person anything above that is pushing diminishing returns money wise. BUT this is /arg/ and we like our stupid expensive rifles
also quads proves im right
>>30107777
>>30106544
I know the feeling anon, my next purchase is a cryptic BCG.
>>30107715
pls rspnd.
>>30107777
rainier is the best WA manufacturer
>>30107794
Until some that guy shot it. It's always that guy.
>>30107836
I was personally going to go with a strike industries for looks to match my billet receivers, but my milspec bolt catch hasn't given me any problems
>>30107838
You could always get a grey ghost :^)
>>30107715
>>30107836
Define quit working?
>>30107853
its sticking.
>>30107859
so on the last round it doesnt lock the bolt back.
>>30107852
never heard of em, i think i can do without the edge roll mark though
>>30105888
stay dry pupper
>>30107864
>>30107859
You probably bent the roll pin during the install.
>>30107865
They're being sold at Rainier Arms last I visted.
Would you buy a Kojima etched AR?
>>30107797
All the parts in the lower of this rifle are aero, except the trigger. Pretty great quality for the price.
>>30107879
its the one that was installed at colt the gun is brand new.
>>30107865
SKULLS BRO, LIKE DEAD PEOPLE GET IT?? CAUSE ITS A GUN?
>>30107882
i just told the guy i wanted a RA lower and then looked at the wall of guns/optics. cool little shop they have
>>30107894
IT NEEDS TO HAVE A SKULL
>>30107882
>Would you buy a Kojima etched AR?
and no im not into weebshit
>>30107894
it will go with my skull magwell grip
>>30105392
Finally someone makes the thread correctly.
So what did /arg/ do this Sunday?
>spent 5 1/2 hours watching a Pygmy goat show
I knew my wife liked the little things but Jesus that took a while.
And my (cucked) lower parts kit is on the way, which is nice
>>30107913
kek
>>30107919
SOPMOD soon, ordered a SOPMOD furniture set from aero for the new rifle, gonna swap out the bravo for that on my current rifle and put the bravo on the new one
1 year and 4 more days until I don't have to have mommy go with me to the gun store to pick up my lowers
Which rail /arg/?
2A SR or Fortis Rev II?
>>30107967
the one on the left
>>30107967
Fortis.
>>30107962
>not an 79.999% lower
Pssssh
>>30107845
Yup, she is still the best dogger
>>30107962
iktf
>>30107967
neither tbhwy
>>30107893
Wow.
Still.
>expecting Colt to not fuck up a simple parts install
>the company that's been riding on nothing but names and memes for 20+ years
>>30107982
Just because you keep posting the same image, doesn't mean that it will magically mill itself.
Fucking get after it, and finish the job you pleb
>>30108072
hopefully their A1 repros are good, those should sell well if they don't manage to screw up
>>30107962
>>30108041
>Not having a based 21 year old gf to buy them for you
>>30108110
tfw no gf
don't you have to be an immediate family member to gift?
>>30108086
>>30107838
what about Aero?
I am biased to Aero because I was raised in Tacoma.
>>30108125
it's as long as you are giving it to someone that is legally allowed to own a gun. It's a really grey area so really there's no way to be 100% that's why most gun shops do mother, father, spouse.
>>30108110
I've actually never had a gf, although I have turned two down. Looks like that mistake means I'm gonna have to make love to my rifle for the rest of my life.
>>30108156
aero's old roll mark is one of my favs. I have aero parts in my build. Nothing wrong with em
>>30108162
ahh. when I turn 21 I'm buying a few lowers and a few handguns
>>30108125
I think so. But who's really going to know once I throw some parts on?
Doesn't it become legal to own once it has parts on it? It isn't stripped anymore at that point.
Anyways, it won't matter in about 60 days for me.
>>30108162
>I've actually never had a GF
People actually exist on /k/ like this?
Jeez
Anyone interested in an Olive Drab 30rd HexMag (never used but out of package) and a Magpul MOE grip (black) NIB?
Looking for a black AFG pic rail. or a 40rd PMAG or anything else AR related.
>>30108175
>People actually exist on /k/ like this?
you're on 4chan, retard
in case you forgot.
>>30108173
You can own it under 21 anyways. The real legality comes when make it either a rifle or pistol first. It doesn't really matter though if she gives it to you
>>30108072
couldnt resist sub moa for the price I paid.
Now I'm wondering though. At what point does it cease to be a stripped reciever?
If I had to guess I'd say it's when a rifle or carbine buffer kit is installed.
Thoughts?
>>30108101
> if they don't manage to screw up
Remember the Colt 1903 from early last year? $1500 for a .32 that had a shitty park job that no one wanted, milling quality straight out of a chink's garage, and absolutely none of the quality found in the originals. All while costing 3x as much as a legit 1903 in good shape.
>>30108212
It ceases to be an "other" or "firearm" as soon as a defining characteristic is added.
>you stuck a stock on it?
Rifle
>you stuck a <16" barrel on it but didn't stick a stock on it?
Pistol
>you stuck both a <16" barrel and a stock on it?
Felony
>>30108175
do you know where we are
>>30108196
speaking from experience
>>30108196
>>30108236
There is literally nothing about browsing/posting on 4chan that stops people from gaining female attraction.
Unless you're autistic
![WP_20160525_007[1].jpg](https://i.imgur.com/8Gr2iYX.jpg "WP_20160525_007[1].jpg")
>>30108250
>literally nothing about browsing/posting on 4chan that stops people from gaining female attraction.
>Unless you're autistic
What part of this isn't registering?
>>30108250
no, but it attracts such autism
assuming everyone here is socially crippled is a safe bet.
>>30108175
You must be new to this whole 4chan thing huh?
>>30108250
I'm the gfless anon from before. Pretty sure the only reason I haven't had one is because after high school I spend 90% of my time at work, in sausage fest college classes, or sleeping. It seems to bother everyone else more than it bothers me
>>30108261
I raughed much too hard at that image.
>>30108207
What did you pay
>>30108250
>4chan
>the gathering place of autists, aspies, and basically every other form of socially crippled societal detritus
>disproportionately high percentage of homosexuals
You seem to be forgetting where you are.
>>30108290
$700
>>30108272
You don't have to get one if you don't want.
People seem to forget that
>>30108311
ehh you can build one around that price and have sub moa
>>30108272
They are expensive anyways
>>30108345
it seems to be well built I dont have any complaints other than the improperly installed bolt catch.
>>30108260
>>30108261
>>30108262
>>30108272
>>30108294
>>30108321
>This much booty clenching
Topkek
>>30108162
legal under the laws of whom?
>>30108362
I'd say it's not well built if there is a problem but if you like it who am i
I WANT TO FUCK THE DOGGO
>>30108392
basically they had to have been able to fill out the same paperwork and pass the same background check as you without any funny business
>>30108414
Don't be gay.
>>30108416
didn't answer my question
>>30108433
u stole my 33 you fag
>>30105888
keep it dry mah nigga
>>30108434
the state
>>30108433
I WANT TO FUCK THAT GOAT TOO
>>30108474
what state?
>>30108478
i wana fuck a piza
>>30108484
The state conducting the sale. I personally am in Florida. I'm not sure your angle here, what are you getting at?
I WANT TO LICK YOUR DOG'S ASSHOLE AND FINGER HER PUSSY UNTIL SHE SOAKS MY HAND IN FEMCUM THEN I WANT A BOY DOG TO FUCK HER IN FRONT OF ME WHILE I WAIT AND WATCH THEN LICK HER PUSSY CLEAN ONCE HE TAKES HIS KNOT OUT
GOD DOGS ARE SEXY
>>30108478
Don't.
>>30105487
yep just got home from work. sup
>>30108526
HE'S GETTING IT RIGHT IN THE BOYPUSSY
>>30108538
who was I talking to earlier
>>30108550
headin down to oly guy here.
>>30108592
oh kek there is another anon from Olympia who is coming shooting tomorrow. You should definitely make the next meet so I can touch your suppressor :^
>>30108512
ok we get it. we are forced to hang around literal dog fuckers.
>>30108526
stop denying that you masturbate to this shit, because you sure save a lot of it just for 'shitposting'
>>30108757
>>30108757
Those in glass houses, famalam. :^
>>30108783
nothing i post is super gay, alright
>>30108794
How is it super gay?
