carbine gas a shit edition
old thread >>29830624
>>29835679
Too early edition
Posting best rifles.
>>29835679
can you wait 3 fucking posts?
is it that important to you that you have to make it?
>>29835730
He just wants to be a speshul snowflake
>>29835730
thread was stale
sorry for rustling your jimmies
>muh 4chan laws
>>29835730
You tell him!
PA compact prism scopes. 3x VS 5x, they're identical with the exception of their magnification. Which do you think would be better for central Texas plains area?
>inb4 ACOG, Elcan, Strike Eagle barrage
>>29835772
Get both and mount them on opposite 45 degree mounts, with an aimpoint in the center.
>>29835772
I plan on getting a 3X one. But that's because I don't want to go above 4x. I think anything more than that and it reduces speed for closer in engagements.
If you plan on doing a lot of long range type stuff? Yeah maybe the 5x, maybe a 1-6. I dunno. It's your rifle.
>>29835772
ACOG
C
O
G
>>29835780
Sweet baby jeebus, that's brilliant.
I want a 14.5in AR with a pinned and welded A2 brake, basically just an M4gery, what are my options preferably around or under $800?
>>29835787
ayyyy
>>29835787
I'M POOR
M
P
O
O
R
>>29835811
buy more money
>>29835820
>buy more money
Says on your chart you're fucked up and you talk like a democrat.
>>29835803
BCM has plenty of P&W'd 14.5 upper receiver groups.
>>29835834
riot for more welfare bux
>>29835836
Thats what I was looking at, are they good to go?
>>29835808
>"OD" AR
>>29835836
Can you snap a quick pic of your rail 900 attachment? I'm the guy from the last thread asking about the tape switch.
Thanks
>>29835842
kek. whats the context there
>>29835845
Perfectly fine. If you add in their P&W service, the extended A2 FH, drop-in handguards, and BCG (which pretty much eaqutes to a complete upper assembly minus a rear BUIS and chargins handle), it's $572. You can get a M4 lower assembly off PSA for $150, so you're only at $720 at that point. Spend $20 on a milspec charging handle and get a surplus KAC 600m rear BUIS off Jewbay for ~$70, and you'll be right at around $800.
http://palmettostatearmory.com/complete-psa-ar-15-lower-classic-edition.html
http://palmettostatearmory.com/psa-ar15-m16-7075-t6-forged-mil-spec-charging-handle-24080.html
http://www.ebay.com/itm/Knights-Armament-Company-KAC-600M-Micro-Back-Up-Iron-Sight-BUIS-USMC-/222104603390?hash=item33b6774afe:g:ShwAAOSw9~RXJAq2
>>29835862
>rail 900 attachment
Que?
>Still no paycheck till tomorrow
Ordering my lower immediately
>>29835902
I think he wants to see how you've attached your pressure pad, I do too.
>>29835912
what are you building again?
>>29835924
Aight.
>>29835679
more like "overused pic edition".
>>29835932
been posted like three times m8
>>29835925
My first AR, a mid-length 16" PSA premium upper on an anderson lower with magpolio furniture
>>29835936
good starter rifle
>>29835935
3 times too many
>>29835930
>all that urine staining on that quilt
Jesus dude.
So the barrel doesn't get the zip ties too hot? Does the pad ever slip out?
>>29835925
Seems I was going to go with a freedom melonite upper, but this is "premium" for $160 more with BCG and CH
>>29835949
u liked it before bb
>>29835944
Yeah, I'll slowly upgrade and gucci it out later, but I'm just dying to get started on this and take it out.
>>29835957
You could shave $60 off that by getting the bolt and CH seperate. Assuming you are still going for PSA deals here.
Typically their "premium" deals are what include the BCG and CH. As long as the barrel is melonated/phosphated/whatever jerks you off; you'll be good to go.
>>29835950
That was literally the only quilt in the house at that time when everything else had been packed up and shipped over to Vermont. When that pic was taken, it was on an air mattress in the middle of a completely empty room.
>current quilt
The zipties can take a lot of heat, you just make sure they aren't actually touching the barrel. For guns where fullretard may be a real possibility, it's best to probably make it so the securing catches are outside of the handguard, as those are the weakpoints of the tie. The pressure switch doesn't slip out if you tighten the ties properly.
>>29835974
That's a good idea, man, I'll watch the deals when I have the money, if I can save $50-$70, that's more magazines, I have to watch my dollas
>>29835679
I'm a Californian prisoner of pro-2a proportions. Personally, I love me some slavshit and wet the bed every night about some day owning a Saiga. However, last night the thought occurred to me that the "featureless" look isn't specific just to AK -- but is probably more attainable through the AR platform! Regardless of favoritism, I think some AR's look sick as fuck (like those Vietnam style ones with the carrying handles and long, triangular front grip) and wouldn't mind having the best of both worlds some day.
With a long preamble aside, my question for you ARG fags is: how the fuck do I go about trynna get a featureless AR without having to that monsterman grip or whatever? I'm real bad at explaining and provided a picture for what I'm trying to get across. Is there any sort of buttstock that fulfills idea?
Also, where do I get started in general? Thanks bois
>>29836003
Yeah, I wound up buying this upper for my new project because I decided that unless I was going to pay out for CHF, that the meloniting was what I needed, and that I wouldn't be getting anything more until I made the jump to CHF.
http://palmettostatearmory.com/blem-psa-16-midlength-5-56-nato-1-7-socom-melonite-freedom-upper-no-bcg-or-ch.html
I'm going to trim the A2 front sight, remove the handguard cap, remove the delta ring, and then I can drop in my Fortis rail.
>>29836019
Ares SCR lower. Accepts mil spec uppers.
>>29836064
i'ma suck your dick dude thanks
>>29836084
r u a gril?
>>29836084
i'll be whatever the fuck you want me to
the real question now is: should this AR I plan to build be ridiculously long or a normal 16"?
>ps it aint the only thing that's 16"
>>29836106
If you are planning to some day move to a free state, I would get a nice 16" upper that you like. That way once you arrive at your final destination, you can get a new lower, sell the SCR to a friend who is still trapper, and have a nice AR.
All the real money in an AR goes into the upper. This is an exception because you need a snowflakey lower.
>>29836139
are you saying that these lowers aren't of good quality? or that they're just so damn unique that they cost a shit ton
>>29835962
once
what are the criteria for being a tripfag?
>>29836170
I'm saying that are you really going to want the compromize lower once you are in a free state and don't need it?
They are high quality for sure. But is it the lower that you really want?
If so then whatever. Enjoy the rifle. If not, in a free state you can put a regular lower together for like..$150.
>>29836196
have some amount of knowledge, start inter-tripfag shit slinging
>>29836196
Typing some letters and/or numbers, then typing one or two pound signs, then typing some more letter and/or numbers after.
>>29836198
I think I would it's too damn pretty to let go of. guess different strokes different folks
thanks for the help appreciate it
>>29836206
I have knowledge of dank memes and I like slinging my own shit like a chimp.
>>29836196
you have to be a homosexual
>>29836213
The important part is whether YOU like your rifle or not. People like to bitch at MSD because he doesn't have a free float rail, but he likes his rifle and it does what he wants it to.
>>29836231
Oi, I bet that packs a wallop like a kick from a roo, m8
Favourite barrel twist rate?
>>29836246
1:7 is best twist
>>29836231
Does that stuff pattern well for you? I'm debating getting a box or two.
>>29836219
I am
Does it count if I haven't 'come out' yet?
>>29836231
oi ya soft cunt ill fookn beat ya poofta arse
cunt
>>29836253
1:8
>>29836286
fug, meant for>>29836246
>>29836292
>fug
ill fug u :DDD
It's here
https://www.youtube.com/watch?v=XjJaikgeAQk
>>29836385
benis :DDDD
>>29836406
kinda ruined the excitement by telling everyone about the paint before the video release
>>29836196
You're already halfway there. Now, pick up an AR and a sense of elitism.
>>29836272
I got about 1/2 moa with the 55gr
>>29836281
kek
I hate every single one of you
>>29836632
You are consistent, I'll give you that.
>>29836286
>>29836292
Mistake or not you aren't wrong. 1:8 master race.
>>29836902
Confirmed
>>29836206
>Tripfag
>Have knowledge
Pick one
So far so good
I am considering going back to a pinned FSB. Weigh in your opinions?
My reasoning being that if for some reason the worst nightmare (or greatest fantasy?) comes to pass and shit has hit the fan requiring average joes like us to use our rifles in combat situations where other people will be shooting at us I feel like it makes more sense to have that heavy solid FSB then some flip up that could get fucked up by a stray round. Not so much concerned about the rear irons because if something happens that close to my face that my rear sight might get fucked up, I probably have bigger concerns.
Is this dumb? How do you guys feel about pinned FSB?
>>29837082
Your reasoning is a bit dumb, considering one of your concerns is having your FSB survive getting shot. That being said it sounds like you just want an excuse to use a FSB, which is cool because FSB's can be aestheic af
>>29836980
Tell me, step by step, how you'd build a 1/1 NFA-safe A1 clone anon. :^
>>29837139
Am I wrong to think the FSB has a better chance of surviving a stray shot or ricochet than some after market railed sight? The FSB is pretty solid.
>>29837168
Not the anon you are referring to but I would legit like to know this. Best I can do is an A4 style.
>>29837013
Try extending the stock out further.
>>29837214
Would you like to have it done in 8 months or a couple weeks?
>>29837235
Why the huge difference?
>>29837223
Will do familia
>>29837189
It is more solid than a rail mounted system, but the scenario just seems extremely unlikely. Also consider that a round striking the FSB can also affect the barrel it's pinned to, whereas a round striking the front sight on a FF rail may not.
The situation in its entirety is very unlikely, and I've honestly never considered such a thing.
>>29837258
It depends on whether you want to order from Nodak Spud or not.
>>29837189
I should also mention that my front sight is built into my rail, so it's not as if I have a dog in this fight
>>29837266
why FDE stock when everything else is black
Any of you losers playing the overwatch beta?
>>29837268
I have only recently started considering it.
There are other things besides stray rounds too like bumping into shit, debris flying through the air, shrapnel etc etc. It just seems like in a really shitty situation the risk of damaging an FSB is less than the risk of damaging some after market rail mounted iron sight.
But I honestly don't know how true that is. In the army our rifles all had pinned FSB's obviously so I never had an opportunity to test. Not that I really would have wanted to be in a firefight testing the durability of different sights.... But the point is I don't really know. Thats why I am asking because I need other peoples input.
>>29837345
havent heard from you in a while
>>29837353
I've been doing stuff away from the computer more than normal recently, and have been dicking around on /g/ a bit when I've been at the computer.
In for I need a 4" grinder.
Maybe the neighbor has one I can borrow.
>>29837313
What the hell. How? What rail is that?
>>29837311
I never even knew about them. Holy crap. Whats the weekly option?
>>29837397
fucking normies
i kid. I'm looking forward to spending time away from my computer next week, and I'm sure all the salty anons are too.
>>29837399
does she know you post her
>>29837418
She knew I was going to post this photo.
>>29837399
I always see that couch and I think it is made of sand bags.
>>29837311
Let's proceed under the assumption that waiting 3/4 of a year for NDS to send you your upper and lower doesn't exactly sound appealing.
We'll start out with the upper;
This can be had, if you're patient, by browsing Gunbroker and waiting for one to pop up that isn't stupidly overpriced. Failing this, you can order an NDS one from Brownells, without the 8 month wait. The caveat is that, for some reason, the Brownells NDS receivers are all in A2 black. For an additional $80, you can have it shipped over to John Norrell to be refinished in a proper A1 color. The color you want is Grayish-Black Flat.
Upper; http://www.brownells.com/rifle-parts/receiver-parts/receivers/upper-receivers/ar-15-m16-a1-upper-receiver-prod83620.aspx
Refinishing; http://www.johnnorrellarms.com/refinishing.asp
Lower;
Here you have two routes. The aforementioned Brownells, coupled with the refinishing, or, if you want to save some money, a reprofiled A2 lower from McKay Enterprises.
NDS Lower; http://www.brownells.com/rifle-parts/receiver-parts/receivers/lower-receivers/ar-15-m16-a1-lower-receiver-prod83622.aspx
McKay Ent.; http://www.mckay-ent.com/ar15-m16/m16-a1-lower-receiver.html
>>29837421
figured, just was wondering
what do you need the grinder for
>>29837422
same
>cordan's qt fort
>>29837443
To trim an A2 FSB.
I also need a dremel, but there should be one in the garage somewhere. If worse comes to worst I could use a cutoff wheel and a polish wheel on that. It will just be a little more tedious.
The question is whether I can get off the handguard retaining cap without having to actually remove the A2 FSB. Which would be optimal. Because fuck taper pins.
I do plan on removing the gas tube for all of this though, as that is the most fragile part of the system.
>>29837399
>>29837421
how did you convince her to let you post her on a Mongolian claymation board?
>>29837466
Muh dick.
>>29837464
I didnt even know you had an AR with an A2 FSB
you should be able to cut the retainer right off, they're pretty thin.
>>29837442
We have your receiver sets. The hard part is over. Now what? Next step is, obviously, the barrel. You have a multitude of options for this part, as a 20" pencil profile isn't exactly hard to find. For the sake of easiness, I suggest the offering from AR15sport, as it comes with the FSB and triangular handguard retainer installed.
http://shop.ar15sport.ihoststores.com/productinfo_v3.aspx?productid=BARREL-20LWT12
Up next; the parts for securing that barrel to the upper. Again, this can be all found from AR15sport.com. You can get the standard slipring components, just make sure that the slipring itself is the flat, A1 style seen here;
http://shop.ar15sport.ihoststores.com/productinfo_v3.aspx?productid=ARPART-115
>>29837346
It's a valid concern but I would disagree. I would rather damage a rail or rail mounted front sight than a FSB; those parts are more easily replaced and don't actually effect the function of a rifle. I don't think you'll ever see a test involving sights getting shot, and I would recommend a compromise by getting a fixed front sight for a FF rail. DD and Troy make some, and they're supposedly quite robust, without having to forgo rail options to accommodate a FSB.
>>29837413
The rail is an older URX 3.0. URX II's and older SR25 rails also had the integrated front sight. It's honestly more of an aestheic appeal thing than anything else, it's not that great of a front sight when flipped up.
>>29837508
I just ordered a new upper to replace the upper on my other lower.
The best upper for the price was a PSA middy. I also got a Fortis rail that clamps to the GI barrel nut.
So really I just remove a bunch of scrap metal.
Still cheaper than buying a middy upper with an M-LOK rail I like from the start.
>>29837528
I almost did the same thing with my dissy, but I wanted to move away from govt profile. Should work out nicely for you.
A2 gas blocks are a bitch tho. mrgunsandgear has a video about trimming them fyi
A-am I gucci yet?
>>29837542
I've watched pretty much every video on YouTube about it.
I'm just not going to remove the FSB from the rifle though. So after grinding the shit out of all of it I'll just spray it down with engine enamel and attach my rail. Then spray paint it guacamole green.
>>29837550
>magpul stock
KYS
>>29837550
You just went full gucci.
>>29837559
should be fine.
>>29837560
mine wobbled like a son of a bitch
2/10 would not buy again
>>29837550
>+/-$3500.00 rifle
>$39.99 Anderson lower
>A-am I gucci?
Some things I don't think I will ever understand.
>>29837513
Furniture time. Again, plenty of places to choose from, but non specialize in A1 furniture like USCollectorsOrdnance on GB. Here, you can look through individual furniture components and pick what you want. This, however, is a pretty good set; http://www.gunbroker.com/Auction/ViewItem.aspx?Item=555789547
For the BCG, any milspec will do, as its design has been unchanged for 50 years and was introduced with the A1. Take your pick here, honestly.
The flash hider is easy to find, but you want to make sure it comes with the correct split washer. A lot of the "A1" split washers you see online are for too thick and are modern reproductions. So, let's go with APEX's offering; http://www.apexgunparts.com/ar15-m16/colt-ar15-m16a1-flash-suppressor-cage-w-lock-washer-vg-to-ex.html
>>29837569
Probably.
The upper gets here tomorrow, but the order from my rail hasn't even processed yet. So I won't even start cutting it yet. Plus I need to order a front sight, and stock, and not shitty charging handle, and an endplate with a QD socket from Primary Arms too.
Has any one ordered from Red Barn Armory before? I ordered my rail from them Monday night and the order is still processing.
>>29837599
Some people grow into Gucci. Not everyone starts off with billet sets and multicam tuxedos.
>>29837608
When are you ordering your PA 3x Cordan?I think I might hold off on mine till you get yours so you can post if its shit or nah.
>>29837634
I dunno. I was going to get the rifle for it put together. I also need to send my AK74 parts kit to a builder.
Hopefully soon. I'm hoping I can get some one to buy me a QD mount for it for my birthmas :^)
>>29836231
In
>>29837560
>yfw it was a MOE before
>>29837567
T-thaaanks
>>29837569
It fits up good with the psa upper receiver.
>>29837599
:) you should see the SBR engraving I did with a vibro pen(free hand).
>>29837611
Such is life. I've since learned what you can and can't cheap out on.
Can anyone tell me what this is and goes to
>>29837653
mine wobbled on the buffer tube, the upper was irrelevant
every magpul stock shifts around, they're ok but nothing nice.
>>29837666
Safety detent pin.
>>29837666
Takedown retention pin in your lower receiver. Did you change grips recently?
>>29837673
Thank you
>>29837606
So I deviated a bit from your rifle in my MSD clone. PA light instead of Surefire, getting milspec furniture, KAC VFG showed up today, and KAC rail panels tomorrow. Matech sight on Saturday.
That MI rail is pretty damn nice, it's not sharp at all, pretty nice to grab ahold of.
>>29837344
Will add more stuff like forward grip,mro, and flashlight in fde. I bought the axts charging hammer and couldn't resist the fde version so the rest followed. Again I need to stop buying shit drunk.
>>29837606
Buffer tube get. As with the BCG, pick any buffer assembly that's rifle length and milspec. It will come with a spacer meant for A2 stocks, but you have the based A1 stock, so what do you need that shit for?
All the big stuff is out of the way, time for the itty bitty. Any milspec FCG will do, so, once more, take your pic. The bolt catch also just has to be your basic milspec, along with the takedown pins and their detends. I'd suggest PSA for these things.
The forward assists needs to be the earlier teardrop style. A couple months ago these were everywhere and were even being newly produced by Bushmaster and DPMS. For some reason, they've stopped, and they're not as common. Thank fuck for the secondary market, though; http://www.gunbroker.com/Auction/ViewItem.aspx?Item=556458990
Just couple this with a basic FA spring and rollpin, and she's good to go.
>>29837675
I took off the grip to clean the AR completely after it got soaked
>>29837679
Pseudo-M4geries for life, broseph.
I wanted to thank you guys for helping me get a nice budget rifle build for my first AR. I came here a little over a month ago and asked for a quality budget build and you guys were really nice and helpful. So here is the finished product. Used to be nogunz, but not anymore.
Thanks /arg/.
(Sorry for the picture quality, my phone takes too high quality and the file size is too big, so this image is compressed)
>>29837693
>teardrop fa getting rare for some reason
yeah, we bought them all.
>>29837707
>behold, the only anon who thinks /arg/ is "good"
looks breddy gud m8, shot it yet?
>>29837704
Hell yeah, I was thinking a play on model designations like M4A4gery, because of the definitely M4-ish lower but then the upper is more like a short M16A4 than an M4gery. That's why I got the KAC rail panels and VFG, hell even the MI quad rail kind of looks like a KAC RAS.
>>29837707
>you guys were really nice and helpful.
Shit, don't tell anyone alright? We've got a shitposting reputation to uphold.
>>29837741
Nope. Just got the upper in today. Going this weekend with a friend to test it out.
>>29837737
Hey Giddy, got your suppressor back yet ?
Also, what is your problem with paint ? Your ARs looks like a children on Winjob 95 coloring on paint.
i just discovered that i don't have a pic on my phone that shows my fa in its current configuration and i can't remember if it has an a1 or a2 fa.
>>29837764
>what is your problem with paint?
What problem?
>>29837693
Thank you based anon.
Anyone try primary arms weapon light yet?
>>29837693
Your magrelease assembly can be milspec, so no worries there. Ditto for the trigger guard. I would suggest you get them from Nodak, as they had both in XM Gray, but that's apparently not the case anymore, so just stick with the typical offering. Maybe spray them dark gray or something.
The charging handle, however, is still offered from NDS, and can be had on their website. No backorder either, and it should match your refinished upper perfectly.
Charging handle; http://www.nodakspud.com/AR%20Lowers.htm
The rearsight assembly is a bit of a hassle. Like the teardrop FA, this has become hard to find online despite the fact they were produced until very recently and discontinued for some reason. Apparently this model train site (no joke) has them though; https://www.amherst-depot.com/Gunparts.AR15.htm
>>29837764
i get my can of friday.
pait is the way it is because i'm impatient and indecisive.
>>29837795
I don't know Anon, maybe the fact that his carbine looks a meth addict hooker that was once pretty and his pistol looks like...Well the daughter that is still pretty but not for too long, you know ? She already has too much make up on the wrong spots.
>>29837810
I just got mine in yesterday. See >>29837679
It adds a bit of heft to the front end, but it seems like a good light so far. It's bright as hell too. What do you want to know?
>>29837737
This is actually a possibility...
>>29837844
Agreed pistol looks like a mid 90s toy gun. The rifle to me looks just right, well used, ya know? When I see his rifle it takes me back to Baghdad 2004ish, ah good times.
I'm too poor for optics. What's the best I should be able to do with magpul buis?
>>29837845
How well does the touch pad work
Giddy, which red dot did you settle on?
>>29837898
nigga primary arms makes a red dot for like ~200 bucks with a base, just save up.
still, should be able to easily go out to 300 meters at least with irons
>>29837898
do you mean accuracy wise?
>>29837898
Lethal to 300 meters at least.
fuck you tgi Fridays
>>29837898
Save up for a Vortex SPARC 2 or wait for the SPARC AR. Otherwise, the BUIS is pretty decent. A french dude I know hits sub-moa at 200m with his so, it will hold good.
>>29837835
So what's left? Only the dust cover and firing selector, right? Two small components, couldn't be that expensive. And yet, it's here that so many retro builders screw up. The A1 will have a distinct selector switch and dust cover, but many opt for just slapping on A2-style ones and calling it a day. You can avoid this, fortunately. A1 firing selectors, with their flatm notchless surface, are still available and also let you flip over to the giggle mode position (though you can't actually fire your A1 when it's flipped that way, not even in semi).
Selector switch; http://www.apexgunparts.com/ar15-m16/colt-m16a1-safety-selector-lever-good-to-very-good.html
Now, the dust cover would normally be a hard find. But, I'm here, and I can tell you that the boys at RifleSupply.com have new production A1 dust cover assemblies for all of $15.
Dust cover; http://riflesupply.com/AR-15-Retro-Ejection-Port-Dust-Cover-Gray-A1-Style-DustCoverA1.htm
>>29837898
Get a MD-ADS red dot on an ADM QD mount. $250 setup, solid as all shit.
>>29837909
Um not sure how you want it quantified. It feels sturdy inside, like the metal in it is thicker than I'm used to. The rubber sleeve surrounding it feels soft, almost stretchy, if you pinch it between you thumb and index finger and shift your fingers back and forth you can get the rubber sleeve to slide around a bit. The wire doesn't feel like a Surefire's, but is thick with rubber, I think a Surefire's is reinforced with wire mesh though. Where the wire meets the base that attaches to the flashlight body it has a bit of a gap, I think it is intentional for flex and give. I'm just going to zip tie it real well, if I don't like it I can always swap the tail cap back on. Maybe get a drop down mount and activate it with my weak hand thumb.
Does that help?
>>29837948
God forbid we see a gun, but cp is ok
>>29837987
Yes thank you
>>29837835
>Amherst
I recently ordered from these guys. Site looks like it came straight out of the 90s but those sites are usually pretty solid.
How sacrilegious is it if I use the 1:9 twist barrel instead of the 1:12?
>>29837652
bolice man pls no
>>29837999
Honestly, I wouldn't fault you for it. Only way someone will tell that you didn't use the proper twist rate is if they looked down the bore and knew what to look for.
>>29837941
Yeah. Will it hold up too? I mean it has "back up sight" in its name.
>>29837969
Is that what you have pictured?
Anyone get a hold of one of these bad boys? Trying to find a good precision optic for my ar.
http://www.primaryarms.com/primary-arms-platinum-series-1-8x24-front-focal-plane-scope-with-advanced-cqb-mil-reticle/p/kt-pa1-8x24ffp-ad-mil/
>>29837810
I do not like mine.
>>29838020
there was a test quite a few years ago now that showed the magpul BUIS did better in drop tests because polymer has more "bend" to it and would retain zero vs steel sights.
in the end its a back up sight meant to hit minute of man if your optic fails
>>29838020
They hold up. Magpul did a release saying "If we don't count idiots that used the airsoft version, we've never had MBUS2 returned to us in non-working order" a statement to which I haven't seen any refutation.
>>29837957
>>29837835
>>29837693
>>29837606
>>29837513
>>29837442
Anywho, there you go, how to into A1 component acquisition, step by step. A couple years ago you could have just gotten a parts kit, with barrel, for about $400 and slapped it all on an A2 lower while you waited for NDS to send you your A1 lower in 3-4 months. Unfortunately, the parts kits are almost entirely gone, and what's left is usually worn to hell, without a barrel, and costs about $600-$700. NDS' backorder log has apparently doubled since then as well, but at least there's the Brownells workaround, even thought it'll need to be refinished.
Building an A1 now can be daunting, but it's still quite doable.
Anyone user the slr sentry series adjustable had block? Im thinking about getting the set screw one and am slightly worried about reliability and durability should my life depend on my rifle.
>>29838020
Yes.
>>29838029
How come?
>>29838020
yeah it will do fine.
>who else /postingintheirPC/
>>29838055
It's heavy and the mount it has not not very good. The pad works well though. I'll sell you mine for $35
>>29838070
How you wanna do this bud
carbine gas is fine fuccboi
>>29838070
Gen 2 or 3?
>>29838070
Let me know if he >>29838076
doesn't take it.
>>29838076
>>29838089
3 iirc. I'll post some pics when I get off work. It's not in perfect condition
>>29838066
Cool patch
>>29837924
dubs decided on a t2 with larue mount but no money for it yet.
>>29838077
sure, it works, but midlength is vastly superior
>>29838109
thx bb
>>29837935
Vortex are cheaper if you order on Amazon. The Sparc II is 260$ on their site but 200$ on Amazon. Same thing with Strikefire II, 180$ on Amazon.
>>29838120
r u emt/paramedic/ff
>>29838151
EMT and currently in grad school for higher licensure
>>29838159
Nice. I looked into it here cause they are highly paid in WA. Ultimately decided on le and wastewater
>>29838099
Whay color
>>29838173
Really happy with all the skills and experience I gained in EMS but its rough on your physical health and stress levels.
>>29838135
No real reason to get the Vortex RD over PA's tho
>>29838198
Budget for me
>>29838187
I bet. I've been on a few ride alongs and had a couple cardiac arrest calls, after watching the medics do their shit I was amazed. They don't get enough respect imo
>>29838198
It costs just as much as the PA dot.
>>29838218
meant for >>29838218
Also turns out the Vortex costs more, not the same
http://www.amazon.com/Vortex-Optics-Sparc-Sight-SPC-402/dp/B00NI2UPBG
http://www.amazon.com/Primary-Arms-Advanced-Buttons-MD-ADS/dp/B00OD2L62M/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1462397740&sr=1-1&keywords=primary+arms
>>29838249
>>29838218
Holy shit, fucking kill me someone
>>29838088
What handguard?
>>29838043
Capped that shit m8. My A1 dreams will come true soon.
>>29838249
if you're going to get a piece of shit, get the best piece of shit
>>29838313
So not the Vortex?
>>29838043
So did you finally cave and get a real a1 lower?
>>29838046
i have 2, they are very good and aslong as you fully open and close it after every range session, it won't seize up.
>>29838459
>a real a1 lower
I'm not for putting down five figures for the sake of a little hole and a piece of metal.
>>29838294
>Literally every rifle but mine.
GOD FUCKING DAMN IT.
>>29838623
Eh, mine's not up there either.
>>29838623
my old rifle is up there but not my current one.
has D60 made you a png?
>>29838644
No. He ignored me. I think part of it was a lot of my old photos weren't at the right angle. But a few of the new ones definitely are. He probably already moved on with his life by then.
>>29838644
whens that fag around next
>>29838668
no one knows, he comes and goes as he pleases.
he is a free spirit.
>>29838282
MI SSK
>>29838668
Can you teach Giddy how to paint pls
>>29838731
I tried, didn't work.
>>29838664
>>29838668
They're pretty easy to make on your own, check out YouTube
>>29838755
It's not that I don't know how to photoshop, I usually hang out in /w/ in wallpaper threads and help people out.
It's that I wanted him to do it for me.
>tfw unbanned so I can post from desktop again
Mercy is best girl
I'm mad because I was in a good match with competent people and got d/c'd.
>>29838781
but why
>>29838788
Speak of the devil
>>29838731
>>29838740
>>29838788
hey, i get my can on friday so i'll have some new pics of my pistol with the can by saturday.
can you do the png thing to a new pic for me?
>>29838788
Hey, what's your bnet? I've been playing all day. You still have great taste in waifus by the way.
>>29838794
SO THAT I DIDN'T HAVE TO
WHY THE FUCK WOULD I JERK OFF WHEN I COULD GET SOME ONE TO DO IT FOR ME?
>>29838821
wow actually, that doesn't look bad at all.
>>29838837
Satisfaction of doing it yourself ^:
>>29838806
Boo!
I was posting from my phone at work earlier.
Got b& for postin "nsfw" on /v/ overwatch thread on sunday.
>>29838821
Yeah
I'm larping this weekend though, so I'll be back and look at the thread on sunday afternoon.
Is this your old can or a new one?
>>29838824
Curiositie#1952
I'm not on right now since I'm about to eat dinner, and I'm buttmad about that match being dropped.
>>29838258
What's wrong with vortex?
>>29838879
Same exact thing happened to me like twice. I think they're doing some updates since they're letting in all the plebs. I added you though.
Muh not really an AR yet AR. Lower is currently 700 miles away at other place antd too lazy to get it.
I nicknamed it shekels because every part was bought at sales/gunshows for super cheap so long as they weren't low quality shit.
Personally I don't think I'm doing that bad for a poorfag first AR. I mostly spend $$$ on antique guns.
>>29838885
Kinda stupid to go for the Vortex RDs when the MD-ADS exists. That said, I'll take a Vortex variable power scope over a PA one.
>>29838908
Probably.
Hopefully The plebs don't kill the servers.
Best low power scope for AR under $350 or so? It's between the Leupold VX-1 or something and the Nikon M223 currently.
>>29838937
I was a cunt hair away from going over the edge on buying a Leupold VX-2 1-4x20 for my carbine, but instead opted for a Colt 3x20 for my A1 build. I didn't look into the VX-1 that much, but the VX-2 was really appealing.
>>29838929
I see what you mean, but I like the cantilever mount and the overall design. That MD-ADS looks like the Bushnell trs-25
>>29838977
>That MD-ADS looks like the Bushnell trs-25
It looks more like a H-1, the TRS-25 has its battery compartment at that retarded offset angle.
Great thing about the MD-ADS, aside from the 50k hour battery life and durability, is it's compatible with anything meant for Aimpoint's red dot line.
>>29838914
>clamp on RAILED gas block
>BLUED barrel
>those airshit sights
>"so long as they weren't low quality shit"
Bruh...
>>29838879
old can, sf fixed it and sent it back.
thanks, bro.
>>29838937
Leupold VX-R
Vortex Strike Eagle
Heavily used Leupold Mk4
Millett 1-4x
>>29838937
Strike Eagle is neat.
>>29839034
Hooray!
I'm glad you're finally getting it back, it's been what, 2 or 3 months?
>>29838908
Side thought:
Who's your favorite hero to play so far?
I've really liked Pharah.
Other heroes are fun too, but I feel like I'm most effective as Pharah.
Building a 300 blk SBR
Which is best barrel length and why?
>>29839126
It's really hard me for to choose but I've played the most time as Bastion but Junkrat and Mercy are right behind him. I'm trying to play heroes that I've have less experience with lately. They're all pretty great.
How's everyone's day been thus far?
>>29839126
11 weeks
>>29839172
11.5 because why not
>>29839172
8.5" achieves full powder burn with most commercial loads. If you're gonna handload subs, 8" will fully burn H110/W296 and AA1680.
I think 8.5" is a good middle ground especially if you're gonna mount a can. Gives enough handguard to shoot comfortably if you're not putting a can under it while being short enough even a long/heavy can isn't unwieldy.
>>29839187
It's rainy here and I'm stuck doing desk work.
Ok day tho, overall.
How's it going over there, friend?
>>29839191
I actually wanted 11.3/11.5 or even 12.3/12.5 but I can't source any under 200 dollars
If anyone is holding out please share
>>29839215
I'm not into hand loading yet but I will be using factory subsonic loads, I've read that 1:8 twist can have issue with the heavier sub loads. Is this true in your experience?
>>29839254
Not an issue unless you're trying to load 240+gr bullets at under 1000fps. I've got 2 barrels, a 1:7 button rifled, and a 1:8.5 polygonal rifled. Both shoot my 245gr NOE's just fine, but those are cast. Haven't tried loading any 240gr Matchkings yet because they're expensive.
>>29839226
>12.3/12.5
Why would you do that anon ? Are you insane ?
>>29839187
still waiting for paperwork so I can get that stupid USP tactical and go shoot some sweet suppressed .45
Still considering just ductaping the can to my actual USP.
>>29839217
Gloomy typical western Washington day. Had to fight traffic most of the day.
Arigato Obama San
>>29839320
Eastern Washington best Washington.
>tfw jumped into the AR game only knowing noveske and bcm a few years back
>found a gen 3 noveske chainsaw lower
>ordered some random carbine bcm upper
Oh how I wish I could start over. My gun looks funky but whatever, I've been slowly making it better. Still irritated about the bcm upper but feel obligated to keep it on because the gf gave me a vltor casv.
>>29839186
I need to spend more time as mercy/ lucio zenyatta, I'm usually trash at supporting in games like this but I've done ok as a tank or Symmetra so far.
>>29839191
Dang
That's forever
>>29839340
Once Seattle is destroyed and the land upon which it sits is salted. Until then I guess you are right. Haven't been out near Spokane.