[Boards: 3 / a / aco / adv / an / asp / b / biz / c / cgl / ck / cm / co / d / diy / e / fa / fit / g / gd / gif / h / hc / his / hm / hr / i / ic / int / jp / k / lgbt / lit / m / mlp / mu / n / news / o / out / p / po / pol / qa / r / r9k / s / s4s / sci / soc / sp / t / tg / toy / trash / trv / tv / u / v / vg / vp / vr / w / wg / wsg / wsr / x / y ] [Home]
4chanarchives logo
/akg/ AK General
Images are sometimes not shown due to bandwidth/network limitations. Refreshing the page usually helps.

You are currently reading a thread in /k/ - Weapons

Thread replies: 255
Thread images: 78
File: 79824_74165618_ak107op.gif (18 KB, 475x143) Image search: [Google]
79824_74165618_ak107op.gif
18 KB, 475x143
AK General /akg/
Balanced Recoil Edition

Old thread here >>29619567
>>
File: 20160407_153601.jpg (4 MB, 3264x1836) Image search: [Google]
20160407_153601.jpg
4 MB, 3264x1836
>>29635440
swagpul shit
>>
File: image.jpg (227 KB, 1920x1080) Image search: [Google]
image.jpg
227 KB, 1920x1080
>that kalashnikov concern 107 clone will never be put into production and shipped stateside
>you will never fingerfuck the shit out of your double piston AK and make everybody jelly as fuark at the range with your zero recoil

Just end me senpai desu
>>
File: IMAG2249.jpg (1 MB, 3808x2144) Image search: [Google]
IMAG2249.jpg
1 MB, 3808x2144
>>29635440
I am not ashamed.
>>
File: 1452762374154.jpg (262 KB, 544x604) Image search: [Google]
1452762374154.jpg
262 KB, 544x604
What arsenal ak should I get the 7.62 or the 5.45 version?
>>
File: image.jpg (619 KB, 2550x826) Image search: [Google]
image.jpg
619 KB, 2550x826
>never EVER
>>
>>29635656
.
>>
File: image.jpg (2 MB, 3264x2448) Image search: [Google]
image.jpg
2 MB, 3264x2448
>>29635676
I love my slr 104
>>
>>29635451
What the fuck did you do to the finish on that gun ?
>>
>>29635721
He fell for the wasr meme
>>
>>29635690
The question you should be asking yourself is, why haven't you filtered me yet?
>>
>>29635656
Where'd you get that sweet furniture, family?
>>
>>29635676
get one of both
>>
File: xQNAUkd.jpg (245 KB, 2082x1321) Image search: [Google]
xQNAUkd.jpg
245 KB, 2082x1321
Submitted my Form 1, after two years of dicking around.
Also perfected bumpfiring my RPK today. Put an entire 40rd mag into a 2ft spread at 100 yards in about 5 seconds. Super easy to do off the bipod.
>>
>AS M7
>WASR
which one is better?
>>
>>29635752
I....really? It's Magpul for AKs.
>>
>>29635798
*SA M7
>>
File: image.jpg (3 MB, 3264x2448) Image search: [Google]
image.jpg
3 MB, 3264x2448
>>29635729
My wasr does not look like that shit
>>
>>29635779
Nice.
>Was it the bakelite 40?
You have a rear load drum too, right?
Have you tried it with that yet?
>>
>>29635818
where get vert fore-penis?
>>
File: IMAG2250.jpg (1 MB, 2144x3808) Image search: [Google]
IMAG2250.jpg
1 MB, 2144x3808
>>29635451
Fellow Alaskan?
>>
File: ddr1.jpg (189 KB, 1000x666) Image search: [Google]
ddr1.jpg
189 KB, 1000x666
Pulled the trigger on getting the WASR, at a relatively low price before a huge increase I think will happen soon. I like the idea of having a folding stock, like a 103. Is there a solid AKM folding stock like it?
>>
File: image.jpg (2 MB, 3264x2448) Image search: [Google]
image.jpg
2 MB, 3264x2448
>>29635872
Apex gun parts it was 24$ for the set
>>
>>29635858
Na, it was just one of those shitty Bulgarian bullet pattern mags. It was the end of the day and it was starting to rain so I just grabbed the closest one.

I do have a drum, I've only emptied it twice. First time was rapid fire, it failed to feed the last 4-5 rounds. Probably didn't wind it enough.
2nd time was an attempted bumpfire, it was slower than the one today and also had two jams. Don't know why it jammed but I'm guessing it was due to the ATF party mix I had it loaded with (FMJ/HP/SP)
>>
>>29635818
>no mag dimple
>doesn't look like shit
Pick one fampai

M70ab2 >>> wasrshit
>>
how do i make sure an online purchase doesn't leave me with a crooked sight or loose magwell?
>>
File: kaptainkekhimself.jpg (258 KB, 768x1024) Image search: [Google]
kaptainkekhimself.jpg
258 KB, 768x1024
>>29635909
>>29635858
My "big game hunter" pose on the target. General spread was on the left side; my buddy had hit it a few times with his R700 which are the bullseye shots and the headshots were from a flintlock, kek.
>am i edgy enough
>>
>>29635975
Step 1: do not buy century arms product

I made the mistake twice. Just not worth it.
>>
File: 19446.jpg (228 KB, 1600x900) Image search: [Google]
19446.jpg
228 KB, 1600x900
>>29635909
>it failed to feed the last 4-5 rounds
>Probably didn't wind it enough.
Likely. That's a problem more than a few people run into.
>I'm guessing it was due to the ATF party mix I had it loaded with
Also likely. Did you notice if it was the HPs that the stoppages happened on?

Here's one of my romy 75s and the newest member of my drum family, 100 round Chinese.

>>29635982
You're never edgy enough.
Will the Gold tigerstripe ever make a return?
>>
>>29635907
sold out, anyone else have link?
>>
>>29636017
Nice, are those both rear loaders? I'd like to get a top loading Romy for my RPK; the slight cant looks so goooooood. Where'd you get the chink 100?

Gold tigerstripe may come back. I plan on doing something swagged out sooner or later, though I haven't fully decided yet
>>
>>29636020
i actually bought the last set they had about a week ago got here yesterday haha
>>
>>29635451
>>29635656
>These guys got Zhukov stocks
I kind of wish I had gotten the long handguard, but I do not regret not getting that stock.

I went the classic way with a collapsible stock adapter and a MagPul Carbine Stock cuz cheek riser & shit.
>>
File: image.jpg (136 KB, 807x538) Image search: [Google]
image.jpg
136 KB, 807x538
>>29635982
Lookin good buddy, what state are you in nowadays?
>>
Might pick up a Yugoslavian m70, are they any good vs a c39v2?
>>
File: 1458087722905.jpg (2 MB, 4128x2322) Image search: [Google]
1458087722905.jpg
2 MB, 4128x2322
>>29635975
Inspect it before you accept it.
You can refuse a transfer if it's not acceptable.
>Check for canted sights by inverting the rifle on a flat surface like pic related.
>If the sights are straight, the ears on the front will both sit flat as will the rear sight.
>Bring a couple mags of varying countries of origin and size to check for magwell fitment.
>>
>>29636051
Better. My m70 is a tack driver and I like the heavy barrel and receiver.
>>
>>29635967
>non cromed line barrel
Maby equal not superior by any means
>>
>>29636037
Well post your AK.
>>
File: image.jpg (2 MB, 3264x2448) Image search: [Google]
image.jpg
2 MB, 3264x2448
I can't wait for my new mags to get here 3 more days
>>
>>29636064
Chrome lining is meh. Don't leave your rifle in nasty sea air or something.

Also no chrome = more accurate as well.
>>
File: 19449.jpg (279 KB, 1600x900) Image search: [Google]
19449.jpg
279 KB, 1600x900
>>29636033
Yeah, they're both rear loaders.
Got it from a friend of a friend.
Paid more than I cared to, but I've been wanting one for awhile, so I said fuck it.

I have a pair of top loader romys as well.
They're cool, but a pain to load compared to rear loaders.
>>
>>29636109
Chrome lining is to protect against shitty corrosive ammo. The accuracy difference is going to be tiny (when comparing barrels of equal quality otherwise)

It's not a big deal either way, just clean more thoroughly.
>>
>>29636048
South Canada.

>>29636125
You dumped it yet? Got any pics of it in a rifle? Regular drum in my RPK is pretty large, can't imagine the 100rd one.
Yeah I imagine they'd be a pain to load, but I would probably mostly use it for photo ops anyways.
>>
File: Evolution_2.jpg (4 MB, 3264x2448) Image search: [Google]
Evolution_2.jpg
4 MB, 3264x2448
>>29636109
You're not going to get an appreciable difference in accuracy with that M70 compared to a WASR. The corrosion resistance and barrel life would be a much more important factor.
>>
File: LPSWASR3.jpg (354 KB, 1192x742) Image search: [Google]
LPSWASR3.jpg
354 KB, 1192x742
>>29636087

Waiting for shit to arrive
>>
File: image.jpg (2 MB, 3264x2448) Image search: [Google]
image.jpg
2 MB, 3264x2448
>>29636152
Honestly my opap was my least accurate ak that's why I sold it and kept my wasr its been a dream
>>
>>29636152

This. The WASR barrel is seemingly the best one available in terms of durability.
>>
>>29636152
The Yugo has a better thicker barrel, the new wasr barrels are pure shit, it failed after 265 rounds in full auto.
>>
>>29636175
>Blaming the barrel for not doing something it wasn't meant to ever do

Excuse me while I try to drive my factory stock Blazer up a mountain trail
>>
>>29636175
Has there been a full auto test on a yugo ?
>>
File: Beryl and Saiga.jpg (2 MB, 2988x1681) Image search: [Google]
Beryl and Saiga.jpg
2 MB, 2988x1681
>>29636170
Yeah, had I the choice, I would have definitely gotten a WASR instead. My M70 wasn't bad though. It just has no particular advantage over a WASR besides price when I bought it.

>>29636173
It's pretty damn good.

>>29636175
lol
>>
>>29636152
It helps, actually, and the heavy barrel/receiver does as well.

My m70 vastly outperformed the wasr I had. To the point I sold the wasr off.

>centurymonkey barrels being better than a great condition milsurp m70 barrel
Kek
>>
>>29636161
You know, I was trying to find that kind of scope for my AK today at a local gunshow. No luck unfortunately, so I just got mags and ammo.
>>
>>29636207
I find it funny that you think Century makes the WASR barrels. You should probably learn what you're talking about before you make shit up. Go ahead and post your M70.
>>
Help me pick an AK.

> Century M64 RPK - $800
> Kastava AK47 - $600
> Yugo Century M70 Underfolder - $700

Other recommendations?
>>
>>29636195
I bumpfired one 75rd drum and eight 30rd mags really fast to get more cosmoline out of my handguards.

It never had an issue but I stopped because the wood was about ready to catch fire.
>>
File: image.jpg (4 MB, 3264x2448) Image search: [Google]
image.jpg
4 MB, 3264x2448
>>29636204
It was a heavy bitch too I actually really hated my opap it was my first ak and I wanted it to be something it wasn't
I'm really happy my taste have progressed in my opinion
>pic related my opap before I sold it
>>
>>29636187

Doesn't matter if it's not what its meant for, the yugo still has a better barrel regardless of that.

Heres a SBR going more, the short barrel= less heat dissipation so it's fighting a uphill battle with heat and still beat the POS wasr.

https://www.youtube.com/watch?v=CJm_pobZaJg&spfreload=10


The romanians have never been known to be a decent maker of weapons or ammunition.
>>
>>29636217
>implying I made any implication
>thinking century sources good parts
The same century that used .224 barrels for their tantals. Kek.

I'm not at home but it is a parts kit build off a basically brand-new kit.

I had a wasr and it was trash comparatively.
>>
>>29636234
>The romanians have never been known to be a decent maker of ammunition.

The old Romanian Red army standard ammo was absolute garbage, which is why century ditched there asses.
>>
>>29636217

Where did I state century makes wasr barrels, learn to read retard.
>>
>>29636265
>centurymonkey barrels
>>
>>29636149
>You dumped it yet?
Haven't had a chance yet.
>Got any pics of it in a rifle?
Unfortunately I don't.
Just got it, haven't had a chance to take more pics.
It is rather large, but it's barely noticeable unless it's next to a 75.
>I would probably mostly use it for photo ops anyways
Yeah, unless you load them ahead of time they're a hassle to load at the range.
But like you said, they do look cool.
>>
>>29636253
You're implying that Century even builds WASRs in the first place when they don't. They import them and slap in enough parts to be 922r compliant.

>>29636265
>centurymonkey barrels
What else did you mean?
>>
I bought a new wasr and it was canted to hell, returned it and bought a arsenal.


Seems they are just as shitty and the old ones.
>>
>>29636278
Still not implying that.
>gypsyshit
>good

Century is sourcing shit parts by getting anything romanian no matter how "assembled" prior to centurymonkeys fucking it.

Jesus anon this is the same company that ground down cetme bolts to make the illusion of correct bolt gap.

The only reason to buy from them is if you are poor or a cheapskate. Just about any other AK is a notable improvement, aside from century's many other abominations.
>>
>>29636286
>Did you not inspect it before the purchase
>>
>>29636286
Congrats you figured out the wasr meme
>>
>>29636313

Returned it on the spot.
>>
File: PSL_(rifle).jpg (911 KB, 3234x1908) Image search: [Google]
PSL_(rifle).jpg
911 KB, 3234x1908
>>29636212
>I was trying to find that kind of scope for my AK today at a local gunshow.

If you find one it will probably be clamped to the side of a PSL. I was lucky enough to find someone's cast-off on eBay.
>>
>>29636269
Ah, well I'll keep poking into the AK threads to get a looksie.

I usually preload most of my mags before I go to the range anyways. Usually never go through all the preloaded ones. Spend most of my time loading my 1911 because I only have two mags. There is a guy on armslist about an hour away selling 7 Wilson Combat mags for $80 and I am very tempted......
>>
File: unnamed.jpg (13 KB, 259x194) Image search: [Google]
unnamed.jpg
13 KB, 259x194
Cugir is a fucking junk yard compared to Arsenal,Izhmash,Zastava or the others.


Romanian Gypsy bullshit
>>
>>29636307
Yugo AKs in the US are as much Century as WASRs are. I don't understand how you're trying to take the shitty manufacturer high ground here.
>>
File: image.jpg (1 MB, 1488x1985) Image search: [Google]
image.jpg
1 MB, 1488x1985
>>29636321
I looked through like 4 rifles before I chose mine it's been a real doll no issues whatsoever
>tho it and my Arsenal are not even in the same league
>>
War's aren't even mil spec, besides the shit barrel the receivers aren't even dimpled on the commercial AK's unlike their own military AK's which they do dimple.

The dimples strengthen the receiver near the chamber, non dimpled= weak as fuck.


Literally every AK by every country that made/makes them is dimpled, no idea why the romanians decided to be cheap asses and make substandard shit.
>>
http://www.ar15.com/forums/t_4_64/159106_AK_abuse__home_built_version_update_on_Page_6_.html&page=1

>N-PAP's have literally cracked in have perpendicular the length of the rifle. The receivers cracked just posterior the front trunion (between center bushing and the trunion)

>We have WASR's on the line that have last OVER two and half years and the barrels are NOT shot out and they continue to run. We installed new bolts to bring headspace back up but they keep running

lol
>>
>>29636234
>Doesn't matter if it's not what its meant for

Matters entirely, dumbfuck.

Mine has over 1,000 by now and it hasn't melted. My friend's has 4,000 through it and hasn't melted. Then there's Rob Ski's WASR-10 that has 7,000 rounds through it and has not melted either.

It's literally the same situation as beating the piss out of a brand-new car. You can't abuse the fucker beyond its limit and then bitch that it doesn't hold up

Realistically, who the fuck is going to magdump like that anyway?

>>29636353
>no idea why the romanians decided to be cheap asses and make substandard shit.
https://en.wikipedia.org/wiki/Wassenaar_Arrangement
>>
>>29636353


Because they are dirty gypsys.
>>
>>29636339
Just because century has a yugo build doesn't mean all yugos in the states are century. But even a century yugo > wasr. At least it won't be made from inferior parts.

Mine was made from a very good if not unissued parts kit by a guy who knew how to put them together well.
>>
>>29636359

>Comparing full auto to semi auto over a long period of time

Fail try again
>>
Couldn't care less about this fight between poor plebs trying to defend their cheapass Wasr, but what wood is the "new" wasr made of?

Looks like Balsa
>>
>>29636357
>This may sound crazy but it's fair to say that they finally suffer a catastrophic failure (cracked trunion) at 80,000-100,000 rounds. Also, we have WASR's that have suffered a catastrophic failure and we just pull out the old trunion and barrel, grab one from a parts kit, re-rivet, re-barrel and get them up and running.

But-but muh yugos...
>>
>>29636357
>n-pap
>m70
Literally not at all the same. The pap line are new manufacture bullshit.

The m70s are all parts builds.
>>
>>29636369
Well if we're comparing only semi auto wich most of us own the wasr is the clear victor
>>
>>29636359
>total round count = full auto magdump

Nigga you dumb as hell
>>
>>29636369
>Fail
Uh, no. That's a normal lifespan, retard.
>>29636392
>Hurr it doesn't survive this event outside of its typical existance it must be shit

Let me throw my computer in water and bitch about how it sucks for not working, then I'll drive my truck through some houses and complain about it not being good enough. That's exactly the kind of argument you're making.

I bet you're the kind of guy who will bitch at an auto maker for requiring oil to be in the engine for it to work properly.
>>
File: 1460875008119.jpg (10 KB, 225x225) Image search: [Google]
1460875008119.jpg
10 KB, 225x225
>>
>>29636353
Oh look, here's a Saiga with no dimples.
>>
>>29636324
There was one that wasn't attached to a PSL and I pointed that out to a friend of mine and he wasn't all that interested. I didn't have an AK at the time so I just moved on. And like I said, I was kind of hoping to see the same guy there and see if it'll fit on my Century.
>>
>>29636384
>yugo guns are great except for the majority that aren't
>>
>>29636407

Yes, the later saigas are junk as well, they aren't even parked under the paint.
>>
>>29636401
It doesn't survive something that better rifles have zero issues with. That makes it an inferior product. It doesn't do anything better AKs can't do and it fails at something better AKs all do.

I don't give a fuck about you being a poorfag wasrfucker but please stop pretending your rifle is even on par with better AKs.
>>
>>29636416
>02
Yeah that's definitely a later saiga from 14 years ago.
>>
>>29636422
Where's yours ?
>>
>>29636414
>pap line being the majoriy of yugos
They aren't even the most common. Century m70ab2 builds are.

And we are discussing m70s not shitty fucking papshit.
>>
>>29636432
At my house.

>staying at home on a Saturday night
Ishygddt
>>
Wasr always was a poorfag gun, don't understand the fanboyism behind them.


they aren't even cheap, at $650 you can buy a much better ak.
>>
>>29636422
>It doesn't survive something that better rifles have zero issues with.
YOur ultimate bitching point is that the rifles won't survive continuous magdumping. I'm saying 95% of WASR owners won't ever subject their rifles to that kind of shit in the first place, considering how fucking expensive and unpleasant it can get.

>That makes it an inferior product.
No, that makes you a fucking dumbass. It means the WASR is 'good enough' for most people, not garbage.

>>29636422
>please stop pretending your rifle is even on par with better AKs.
I never have and I never will. There are more expensive AK's that are more accurate, tougher and look better.

You're saying it's shit. I'm saying they're good enough.

>>29636448
>at $650 you can buy a much better ak.
Do us a favor and name one.
>>
>>29636434

The Npap is a technically a m70 B3, which never had a grenade launching gas block and has a 1mm receiver.


OPAP is a m70ab1
>>
>>29636441
>bragging about going out
>shitposting on /k/ still
>going out to shitpost on /k/

That's almost worse
>>
>>29636455
>>at $650 you can buy a much better ak.

https://www.atlanticfirearms.com/component/virtuemart/shipping-rifles/zastava-n-pap-underfolder-detail.html?Itemid=0
>>
>>29636455
>good enough
For poorfags who have to constantly defend their poorfag gun to keep the buyer's remorse at bay.

DDI are hardly any more $$ and are flat out superior in every way.

Wasrs were only viable when they were like $300 which is what I bought one at. And surprise surprise it was shit all around and I sold it.
>>
Arsenal owner coming through, don't touch me poor fags.
>>
>>29636461
>technically
IIRC not even made on the same tooling as the real m70s.

The pap series are only m70s in looks alone.
>>
>>29636486

Steel mags are poorfag tier, they aren't current issue anymore.

If it ain't bakelite or polymer it's poorfag.
>>
File: a55d67.gif (3 MB, 445x247) Image search: [Google]
a55d67.gif
3 MB, 445x247
>>29636471
Anon, he said better, not yugoshit.
>>
File: wasrnew (4 of 3).jpg (460 KB, 1000x540) Image search: [Google]
wasrnew (4 of 3).jpg
460 KB, 1000x540
>>29636471
>much better
>>29636471
>n-pap
You stupid fuck.
https://www.youtube.com/watch?v=j18op9M6QgM

>>29636479
>DDI are hardly any more $$ and are flat out superior in every way.
I'm not going to disagree, but you're acting like the WASR is made of fucking paper, and it isn't.

>OH MEH GEH, MUH GLASS POORFAG RIFLE
>>
>>29636470
Gf is sleeping and I'm still awake at her place with fuckall else to do.
>>
>>29636441
Nigga you have a pic on your phone or your a liar
>source if I had a shit yugo and was proud of it I would have many of pictures
>>
>>29636489


Zastava says they are M70's (N-PAP M70 is stamped on the rifle)

so they are as much a M70 as anything.


The OPAP is a parts kit on a new receiver and barrel.
>>
>>29636501
>not stuffing her then being on your way
Granted my gf is working overnight tonight so that was pretty easy to get out of to come home
>>
>>29636496

I'll have to make sure not to run over my Npap with a truck, meanwhile I don't have to worry about my barrel melting if I shoot fast at less then 300 rounds.
>>
>>29636502
Even if I did, which I don't because I'm not some faggot who shows his powerlevels off to other people, you faggots would demand a timestamp next.

And I would want to verify via pc that the phito would be clean of exif before posting to this cesspool. Because posting here without that is like barebacking a pinoy skank with suspicious genital bumps.

Forgive me if I don't feel obligated to cater to your autism for the sake of an argument on a Malaysian fingerpainting imageboard.
>>
My wasr gas block, front sight, and receiver are literally crooked.
>>
>>29636511
>I'll have to make sure not to run over my Npap with a truck,

Naw, see according to the loudest theory in this thread, that one singular out-of-the-ordinary flaw means the n-pap is complete and utter garbage and you fail if you don't get an O-Pap or a DDI instead.
>>
>>29636357
>>29636381
I'd like to see a stress test on yugo AKs that is even remotely this impressive and extensive. A 5 minute YouTube video of someone putting a few hundred rounds through one does not count as remotely.

>>29636516
Exif data hasn't been a thing on 4chan in a long time. Go ahead and check any picture. It gets scrubbed automatically now.
>>
>>29636504
>it is called an m70 therefor it is
Kek. Nope.
>new barrel and receiver
Out of spec heat treat receivers was an issue with whatever junk they were using.

>>29636505
>not staying for wake up sex
Bitches are thirsty in the morning breh
>>
>>29636516
You sound like a scared bitch honestly
>>
>>29636545
nigga shes going to bed at 8am. I get enough sex, she's 19 so shes ALWAYS horny
>>
>>29636540
>yugo stress test
The ethnic clensing and wars don't count?

When did exif start getting autoscrubbed? I don't recall that.
>>
>>29636522
Should have looked before you bought it
>does it shoot ?
>>
>>29636553
Think whatever you want, I literally do not care. The wasr is inferior poorfag trash compared to nearly every other AK.

>>29636562
>night shifts
Pass
>>
>>29636579
>The wasr is inferior poorfag trash compared to nearly every other AK.

Except for yugos.
>>
>>29636579
> If you don't care why do you keep responding and pleading your yugos case ?
>>
>>29636567

>does it shoot

Nope, gas piston gets stuck and doesnt cycle, Its a piece of junk and not worth putting money into to fix it.
>>
>>29636579
>The wasr is inferior poorfag trash compared to nearly every other AK.

Based solely on one weakness that will, in the majority of cases, not cause a problem for everyone.

>DUURRRR
>>
>>29636584

Yugo's are high quality.
>>
>>29636591
>rifle is fine
Just manually cycle it
>>
File: 1339400993040.png (329 KB, 512x384) Image search: [Google]
1339400993040.png
329 KB, 512x384
A question for /akg/ concerning Saiga disassembly: If I need to replace the main spring, would I need to drill out the trigger pins like if I were doing a full conversion? Or could I replace the parts without going through the drilling hassle?
>>
WASR is literal anal god dammiting


fuck WASR
>>
>>29636579
I work nights too, sometimes. We work at the same place and our shifts rotate.
>>
>>29636598
>Yugo's are high quality.
>>29636529
>>
I hereby declare, on this day April 17th two thousand and sixteen, that the WASR is officially and legally, no longer /K approved.

Amen

The following are /K approved

PAPS

ARSENAL

DDI

SAIGA
>>
File: wasrnew (5 of 3).jpg (809 KB, 1000x540) Image search: [Google]
wasrnew (5 of 3).jpg
809 KB, 1000x540
>>29636605
>WASR is literal anal god dammiting

Sprechen sie English motherfucker.
>>
>>29636619

I second the motion.
>>
>>29636624

Cheap ass barrel, balsa wood stock, not dimpled

0/10
>>
>>29636619
>I veto this bill
paps are equal if not worse that wasr because thier specialsnowflake a
>>
>>29636619
>>29636625
I would like to amend the motion to include N-Pap's as well, based on its similar one-in-a-thousand-chance flaw.
>>
>>29636630
Change the fucking stock if you don't like it god dam Obama voter want everything handed to you
>>
>>29636633

Overruled due to 2v1 voting to accept the motion 1 to veto the bill.
>>
We have a vote to amend the bill to include the Zastava NPAP.

do I have a second
>>
>>29636633
The dub dubs have the ruling.
>>29636619
Motion denied, faggot.
>>
>>29636648
Well I'm sending for judicial review that shit is unconstitutional wasr ain't great but it's not trash and its definitely on par with the yugo shit
>>
>>29636655

I vote to remove the POS american made DDI from the bill.
>>
>>29636661
Second said motion
>>
>>29636661

Do we have a second.
>>
File: RobertsRules.jpg (269 KB, 1171x781) Image search: [Google]
RobertsRules.jpg
269 KB, 1171x781
>>29636658
>I'm sending for judicial review

Breh

You really gotta learn some civilization
>>
>>29636664
>>29636661
I always suspected DDI just had a bunch of paid shills. Are they just overhyped shit like I thought?
>>
The motion to amend the bill by removing the Npap from the list is denied due to such a amendment would remove ALL paps from the list, not just the NPAP, but the motion failed to receive a second.

Removing the DDI from the list was motioned and seconded and passes as amended.


The bill stands as


The following are /K approved

PAPS

ARSENAL

SAIGA
>>
>come to Akg from Arg after seeing anons complain of arg being cancer

>see this thread

You guys are worse, just with less tripfags
>>
>>29635681
that looks like an AK raped a MP5
>>
I vote to pass the amended bill.
>>
>>29636688

>/arg/ is tripfags and furfags all over talking about gucci shit
>We're having a civilized meeting about what AK's are actually approved

Yeah, we're worse, sure.
>>
>>29636694

Seconded
>>
>>29636699
I vote neyt
>nice dubs
>>
File: Unknown.jpg (5 KB, 278x181) Image search: [Google]
Unknown.jpg
5 KB, 278x181
>>29636699

Bill passes, court adjourned.
>>
>>29636696
Yeah because an AR can actually be Gucci, and it's a pretty common consensus which brands are actually quality versus the bickering that's happening here.

Yeah, fuck the furries though.
>>
Everyone's talking about Yugos being weak, but M70AB2s with 1.5mm recievers and heavy barrels and shit should be absolute tanks right?
>>
>>29636714
>bickering

Robert's Rules do not allow for 'bickering' in a civil meeting, sir.
>>
>>29636716


It's /K approved, wouldnt be on that list if it was junk.


The OPAP has a 1.5mm receiver as well.
>>
>>29636723

Well I picked up the M70AB2 the other day as my first AK, haven't shot it yet. Everything I understand says the one major weakness of the rifle is the lack of a chrome lined barrel.
>>
>>29636722
Go read the thread again
>>
File: image.jpg (2 MB, 3264x2448) Image search: [Google]
image.jpg
2 MB, 3264x2448
Well shit I better end it my wasr is no good
>oh wait I have a Arsenal also
>>
>>29636732


Non chromed is no big deal unless you shoot corrosive, a unchromed barrel will be slightly more accurate as well.
>>
>>29636740

But doesn't it affect barrel longevity? IE the rifling will wear out in less than half the time?

I don't really shoot at that volume but some people definitely do.
>>
File: AKwLBE1.jpg (417 KB, 831x744) Image search: [Google]
AKwLBE1.jpg
417 KB, 831x744
>>29636619
>/K
>>29636723
>/K
>>29636709
>Bill passes

so who is '/K' anyway? I'm pretty sure this is '/k/', as all of my approved apparel states.
>>
Romak 3 psl for 950$ a good deal ?
1 five and 1 ten round magazine
And what's looks like a posp scope
>>
>>29637898
Yeah that's a good deal. That's basically a PSL for VEPR money.
>>
>>29636424
my saigas serial starts H04, no dimples
>>
>>29636758
this pleases my autism
>>
File: Autism logo.png (3 KB, 284x115) Image search: [Google]
Autism logo.png
3 KB, 284x115
>>29635690
>>
No 2-gun today but at least there's a gun show
>>
File: WP_20160416_001.jpg (2 MB, 2000x3552) Image search: [Google]
WP_20160416_001.jpg
2 MB, 2000x3552
>>29626909
>>29629629
>>29627690

Sposn/SSO Tortila/Tortilla.
No frame.
45L inside
>>
File: LaughingBlueCunt.gif (844 KB, 800x786) Image search: [Google]
LaughingBlueCunt.gif
844 KB, 800x786
>>29636471
>NPAP
>>
File: SmugMILF.gif (473 KB, 512x385) Image search: [Google]
SmugMILF.gif
473 KB, 512x385
>>29636598
>Yugo
>quality
>>
>lolollol we're so much better than /arg/
>this thread
It was only a matter of time before the unity of poorfaggotry dissolved and the shitflinging over which sub-$900 rifle is better started to rise. I wager that once the influx of summer retardation hits /akg/ will be on par with /brg/.
>>
File: PretendRepublicanMan.gif (936 KB, 500x239) Image search: [Google]
PretendRepublicanMan.gif
936 KB, 500x239
>>29636619
>PAPS
>/k/ approved
>>
>>29638257
This. People are fighting over which piece of shit is better, and as funny as that is, it's spreading misinformation.
>>
hey guys, how much resistance should I be feeling when trying to put an upper wood handguard on? Im worried about breaking it.

I know I have to put it in the tracks then twist it, but the handguard I used seemed to be wider than the tracks allowed. Then again, it was a broken handguard that I glued back together, so it might have been a mm wider.
>>
File: NoringoRange.jpg (1 MB, 1600x831) Image search: [Google]
NoringoRange.jpg
1 MB, 1600x831
Was at the range with my friends Noringo AK47.
Holy hell these things are fun to shoot.
>>
>>29636286
>>29636319
>the wasr i looked at was canted
>therefore, all of them are canted

literal retards
>>
File: image.jpg (148 KB, 1136x640) Image search: [Google]
image.jpg
148 KB, 1136x640
Man is /k/ moody today, anyway, here's an Arsenal SLR 107 and USP for you bitches
>>
>>29636758
How do you like those bulgy bullet mags? Someone told me they were shit
>>
>>29636486
Arsenals are my side bitches, tie em up and pee on em AKs.
>>
>>29636688
This is how /akg/ threads go down
>wat ak47 shud I buy
>reposted picture
>how do I take apart my ak
>wat ak47 shud I buy
>reposted picture
>new tripfag trying to fit in
>decent post by chimps
>r wasrs gud
>wat ak47 shud I buy
>x39 vs x39?
>shud I do a screw build
>same picture from same tripfag posted yet again
>wat ak shud I buy

generals are cancer on this board and 4chan in general. /akg/ is no exception.
>>
File: AKHK.png (3 MB, 1771x912) Image search: [Google]
AKHK.png
3 MB, 1771x912
>>29638525
This thread went to shit fast.
>>
>>29635681
Heckler & Koch & Kalashnikov
>>
File: BulgyBullet40.jpg (139 KB, 873x746) Image search: [Google]
BulgyBullet40.jpg
139 KB, 873x746
>>29638540
>Someone told me they were shit

They're on the same level as the first-gen AK Pmags. They don't have metal lugs, but they have metal reinforcing the feed lips.

They haven't caused any problems for me yet. If/when they do, I'll post about it. I'm sure my 40-rounder will be the first to go, since it gets used the most.
>>
>>29638646
>Heckler & Koch & Kalashnikov
>>
>>29636219
wasr $579 at deguns.net
vepr $660
/thread

but seriously if your considering spending 800 for a century shit, spend a little more and get a arsenal.
>>
>>29637904
x54r veprs are under $800 now, and you can shoot all weights of boolets. PSL dont like heavy ball ammo
>>
>>29636619
your judgment is a shit.
>>
>>29639170
>PSL dont like heavy ball ammo
which is basically a non-issue seeing as how surplus is their main food
>>
>>29639218
When surplus hits commerical, which may happen this year, you lose nearly all the benefit.
>>
>>29639170
Has anyone ever had any experience with .308 veprs?

I'd like to get something long rage but in something NATO
>>
File: FullSizeRender-16.jpg (430 KB, 750x1334) Image search: [Google]
FullSizeRender-16.jpg
430 KB, 750x1334
>>29635440
I'mean getting bored of ARs and want to get my first AK. I wanna keep it under or right around $1000.

I'm looking at the petronov AKMs or maybe an Arsenal SLR107FR.

which do you guys reccomend and what other options are good around this price range?
>>
>>29639251
Just get the SLR if youre willing to spend 1k on it
>>
>>29639240
Whats your end game? Do you want to sling rounds out of an AK or are you interested in target shooting? At what distances do you plan to shoot?

I dont have exp with the .308 but shot the x54r vepr plenty.
>>
File: Fotor_145126319907873.jpg (486 KB, 1050x2344) Image search: [Google]
Fotor_145126319907873.jpg
486 KB, 1050x2344
>>29639251
SLR, not only is it awesome rifle but the butthurt it generates is amazing.
>>
>>29639285
I'm looking for something that can reach about 400-450 with an intermediate level shooter with readily available ammo.

Its either that or a PTR but id rather get a vepr since i have a SLR 104 already
>>
>>29639251
Are you set on the traditional look for the ak? Veprs are of great quality, they just dont have as many furniture options right now.
>>
>>29639308
Get the PTR. I've owned VEPRS and while nice they aren't really all that.
>>
File: IMAG0486.jpg (580 KB, 2688x1520) Image search: [Google]
IMAG0486.jpg
580 KB, 2688x1520
>>29639300
Superlative
>>
>>29636407
Which is another commercial rifle. Also most Saigas have dimples.
>>
>>29639308
A vepr is good to those ranges. But if your gonna spend money on match ammo or handloads there are better options out there. I hate saying it in /akg but build a sr25 style rifle. Tons of options, mags are plenty and cheap. Spend the money on the barrel, like something from white oak or wilson combat.
>>
>>29639300
Butthurt? Why?
>>29639309
I don't know really.. I like the look of a regular AKM.. something you might see a child soldier holding. But I know myself, and I would want to start tinkering and if I start with something like the SLR that looks kind of modernized already, I wouldn't feel as bad messing with it.
>>
>tfw I just ordered two thousand rounds of the wolf 5.45x39 mil-spec stuff that SGammo has
>haven't even gotten into the 3 spam cans of 7n6 or the 1500 rounds of the other wolf stuff I bought
>just bought a Bulgy AK-74 parts kit and barrel
>haven't even shot my SLR-104 that I bought two months ago yet because all the local ranges are trash
Fuck me I just wish I lived in a state with more federal land, fuck Kansas, especially the part I live in.
>>
>>29639403
Buttmad poorfags and centuryshits
>>
>>29639406
Honestly, man, I would never shoot the ammo in the 3 cans unless I had to; I wouldn't be uncomfortable shooting the rest.
>>
>>29639423
Stop being a dick. No one really cares.
>>
>>29639434
That was my original plan anyway. At least one of the cans had lost it's seal though so I crack it open, put it in a 50 cal ammo can with a bunch of desiccant packets and called it good. Might do the same with the other one that looks like it lost it's seal. Don't want that stuff sitting there and rusting without me knowing about it. What's the best way to tell if it's still sealed?
>>
>>29639445
As long as you inspect the perimeter of the can and there are no puncture holes, I think you'll be all right.
>>
>>29639445
>>29639488
You might want to shine a flashlight along the perimeter, too. If it's punctured you'll probably see the cardboard.
>>
Got to hold a "space" saiga, and see a couple $1000 unconverted ones....gun shows why even bother
>>
>>29639445
dunk it in water and if bubbles start to rise up its not sealed
>>
File: desire to know more.jpg (231 KB, 627x502) Image search: [Google]
desire to know more.jpg
231 KB, 627x502
>>29639512
>"space" saiga
>>
Waiting for my Bulgy parts kit AK74 to be finished by the AK Fairy.
>>
>>29639512
overpriced beef jerky?
>>
>>29639444
>no one cares
Except for the legion of butthurt poorfags that flood Arsenal threads.
>>
File: nNeBlaVc8Io.jpg (139 KB, 1280x853) Image search: [Google]
nNeBlaVc8Io.jpg
139 KB, 1280x853
>>29639534
One of these, should have asked how much

>>29639552
meh
>>
>>29639300
No one is butthurt that you bought a gun, you colossal faggot.

It's a nice, well-built factory side-folder with a shitty trigger and finish.

Outside of the folding stock Arsenal is pretty unremarkable in 2016.
>>
>>29635818
try showing the same side, senpai
>>
File: 1407608758525.gif (487 KB, 256x190) Image search: [Google]
1407608758525.gif
487 KB, 256x190
>>29639582

>Shroud everything so it doesn't look scary
>Looks fucking gay
>>
>>29639607
With DDI's sidefolder coming, even that won't be remarkable soon.
>>
>>29639514
Seems legit.
>>29639502
>>29639488
Doesn't seem like it'd really work that well.
>>
>>29636353
>>29639371
The vast majority of RPKs say 'sup.

Nice thread, /akg/. :^
>>
>>29639607
>no one is butthurt
On the contrary lad.
>>
>>29639300
>>29639423
>>29639553

>Thinks people care either positively or negatively how much he spent on his rifle

Arsenal is the most cost-effective way to get a proper side-folder. They run smoother out of the box.

Their factory trigger is also fucking garbage and Hoppes will take the finish off. Also plenty of examples of people understandably pissed off with spending more than a grand on a rifle with canted sights.

Personally I don't care for the look of a 90° gas block or polymer furniture on a 7.62x39 rifle, but love the triangle folder.

>want a Khyber Pass gun bad...
>>
>>29639691
Yet again you have no idea what you're talking about you fucking piece of shit. RPK's don't have the dimple because they have a bulged front trunnion and a thicker receiver so there is no need. Standard AK's have a receiver 2/3 as thick and without a bulged trunnion so they have that dimple to reinforce that part of the stamped receiver.
>>
File: ArmsHunting2015-03.jpg (2 MB, 2250x1500) Image search: [Google]
ArmsHunting2015-03.jpg
2 MB, 2250x1500
>>29636353
>The dimples strengthen the receiver near the chamber, non dimpled= weak as fuck
none dimpled mag well got 2 steel plate welded inside
so they actually are stronger than dimpled mag well
>>
>>29639732
>Hoppes will take the finish off.

Wait what? The trigger is an easy fix but this has me concerned about my future.
>>
File: 500px-UntitledM70.jpg (49 KB, 500x293) Image search: [Google]
500px-UntitledM70.jpg
49 KB, 500x293
>>29639735
>I sw-swear guys, dimples are supes important
The salt is real. :^
>>
>>29639760
They are though when you have a 1mm thick receiver.
>>
People getting butthurt about mag dimples.
>>
>>29639756
>2 steel plate welded inside
Yeah, WASRs have that too.

>>29639758
It's true. You just have to use less aggressive cleaners.

>>29639779
This thread is really kind of astounding overall.
>>
>>29639760
You're a fucking moron, this isn't the first time you've demonstrated it, and I honestly wish you'd just fuck off to whatever rock you crawled out from under.
>>
File: TabukWoodStocks.jpg (377 KB, 2380x1420) Image search: [Google]
TabukWoodStocks.jpg
377 KB, 2380x1420
>>29639770
Like, totes obvious bruh. Everyone knows that WASRs are known for falling apart from sustained usage due to that lack of dimple. Like, fore real. :^
>>29636357
>awww, damn...
>>
File: w43P9FA2HHw.jpg (356 KB, 1224x1632) Image search: [Google]
w43P9FA2HHw.jpg
356 KB, 1224x1632
>>29639691
>shutter stock
nice pic fagot
also this is the best RPK of the war
>>
File: WP_20151228_026[1].jpg (2 MB, 3072x1728) Image search: [Google]
WP_20151228_026[1].jpg
2 MB, 3072x1728
>>29639789
Remember guys, it's tripfags and /arg/ that is unproductive cancer. Nothing else.
>>
>>29639794
>Like, totes obvious bruh. Everyone knows that WASRs are known for falling apart from sustained usage due to that lack of dimple. Like, fore real. :^
Congrats on mis-characterizing the argument.
>>awww, damn...
You mean to tell me a shit rifle was shit? WOW. No one is saying that dimples are the end all be all you fucking tripfagging piece of refuse.
>>
>>29636380
European birch would be my first guess.

It's a decently strong wood but unless it's dyed it's REALLY pale in color.
>>
>>29639817
Just fuck off, seriously. You're a fucking joke and an insult to mankind.
>>
>>29639838
>You mean to tell me a shit rifle was shit?
Maybe you should read what he linked again. Here, let me help you:

http://www.ar15.com/forums/t_4_64/159106_AK_abuse__home_built_version_update_on_Page_6_.html&page=1

>N-PAP's have literally cracked in have perpendicular the length of the rifle. The receivers cracked just posterior the front trunion (between center bushing and the trunion)

>We have WASR's on the line that have last OVER two and half years and the barrels are NOT shot out and they continue to run. We installed new bolts to bring headspace back up but they keep running
>>
File: 1451780911012.jpg (202 KB, 526x670) Image search: [Google]
1451780911012.jpg
202 KB, 526x670
>>29639838
>Congrats on mis-characterizing the argument.
>>29639770
>Dimples are super important on 1mm thick receivers
>>29636353
>non dimpled= weak as fuck
>You mean to tell me a shit rifle was shit?
>Th-that doesn't prove anything...

For real though, this thread is glorious.
>>
File: Untitled (52).jpg (538 KB, 2560x1440) Image search: [Google]
Untitled (52).jpg
538 KB, 2560x1440
>thread quality correlates with the amount of trips in it

Wow what a coincidence!

/arg/ is the designated shitting street, you gotta go back.
>>
File: Alabino110416-09.jpg (3 MB, 2250x1500) Image search: [Google]
Alabino110416-09.jpg
3 MB, 2250x1500
4th Guards Kantemirovskaya Tank Division
>>
>>29638686
H&K needs to make a Kalashnikov, the H&K 32 doesn't count.
>>
>>29639868
Okay, and? I've read that thread probably a dozen times since it was first posted months ago. Hell the OP of that thread never provided any proof anyway. My point was that the NPAP failed because it's a piece of shit built with shit steel. The WASR is pretty much perfect except for the lack of dimples which help prevent twisting and deformation.
>>
>>29639876
>all steel is the same quality
"No"
>>
>>29639948
Sorry, I thought you were trying to imply that the WASR was shit like so many of the idiots in this thread. It does have inner plates instead of the dimples though.
>>
>>29639971
The plates don't really help that much with the kind of sheering force and twisting that happens with the AK's
>>
>>29639948
show me a WASR that has a busted receiver from twisting and deformation
>>
>>29639896
>three trips in the entire thread
>thread is nothing but an orgy of autism and buttrage
>>
>>29639896
This.
>>
>>29639921
Another quality post by
>Cz Shoulder Holster Goy !Ho87mGz/C2
Thread replies: 255
Thread images: 78

banner
banner
[Boards: 3 / a / aco / adv / an / asp / b / biz / c / cgl / ck / cm / co / d / diy / e / fa / fit / g / gd / gif / h / hc / his / hm / hr / i / ic / int / jp / k / lgbt / lit / m / mlp / mu / n / news / o / out / p / po / pol / qa / r / r9k / s / s4s / sci / soc / sp / t / tg / toy / trash / trv / tv / u / v / vg / vp / vr / w / wg / wsg / wsr / x / y] [Home]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.
If a post contains personal/copyrighted/illegal content you can contact me at [email protected] with that post and thread number and it will be removed as soon as possible.
DMCA Content Takedown via dmca.com
All images are hosted on imgur.com, send takedown notices to them.
This is a 4chan archive - all of the content originated from them. If you need IP information for a Poster - you need to contact them. This website shows only archived content.