pistol edition
old thread >>30560406
pistol soon
>>30563247
In
>>30563260
Helmet soon
>>30563260
I wish my micro set had USMC, just for that delicious KAC butthurt
>>30563260
What are you getting? A glock?
high capacity assault lever guns
I have astigmatism, and I looked through an EOTECH (Store didn't have aimpoints) and it was extremely clear to me (through my glasses also)
Are aimpoints the same? I know the way they project is different
Bought this CMMG 5.56 for $450 with case, 5 PMAGs, a "red dot" sight, and stubby grip. How did I do?
>>30563304
Aimpoint should agree with you, I also have an astigmatism and my PRO was fine. Everyone's eyes are different tho
>>30563260
>>30563278
Compete AR soon.
>>30563304
Read dis
http://www.thefirearmblog.com/blog/2016/07/06/the-more-you-know-astigmatism/
>>30563310
Here's another pic.
Sorry if it's turned around or whatever
>>30563310
Really fucking good. Throw away that red dot and get something good.
>>30563278
nice
>>30563288
uhh i earned that mark
>>30563292
that hurts m8. im building an ar pistol with the gesissele rail
>>30563330
Planning on it. Thinking of getting a vortex or something. It's a total dad scope...
>>30563310
Ya dun good. Its a basic bitch rifle and the optic is literal garbage but the rifle is worth about $650.
>>30563345
Even more with that KAC RAS.
>>30563345
Going to soup it up, it's a heavy ass bitch so probably trash the scope and get a different one, and swap out the rail system? We'll see. The stock is shit too.
>>30563335
>earned that mark
Oh shiet
>>30563320
>Compete AR soon
Nice work
>>30563310
good catch, id take it
>>30563369
Keep that rail it's a KAC RAS. Use it for a clone build
>>30563379
New to AR's. It's a good rail? What all should I scrap and upgrade? Optic is an obvious one. Butt stock is another obvious one. Came with a sick sling, and case.
>>30563371
Thanks
>>30563370
What did you spray that with?
From last thread
>>30563211
Sup lads, I already have my upper and I'm about to place an order for my lower for my first AR. Wanted to get a second opinion on my lower build.
>Upper: Midlength Delton with a YHM keymod freefloat rail and standard FSB
>Lower
Anderston stripped lower and buffer tube kit
Aero Precision LPK
Strike Industries Ambi Safety (I'm left handed)
Bravo B5 stock
Additionally, should I get a heavier buffer, or should a standard CAR buffer be heavy enough?
>>30563401
Yes it's the rail the military uses on it's M4's. Some day it will be a collectors item.
>>30563401
The RAS is pretty much the best drop in quad, and KAC is a gucci company. It is the issued handguard for the military m4/m4a1.
That being said, its still a non freefloat carbine quadrail in an era of longer freefloat rails. Its also the heaviest of the non airshit tier drop ins.
If you wanna keep it carbine with fixed fsp, keep the RAS on it. Otherwise sell it (its both valuable and in demand) to fund a freefloat.
>>30563430
>>30563370
Not mine, from internet
>>30563431
The G rails are easy to take on and off, not sure how much you're planning on adjusting your gas block though
>>30563431
SLR imo
In guis
are flat trigger groups a gimmick or actual improvement.
any trigger recommendation
>>30563438
>>30563443
Hmm i'll have to keep it on there then. Seems like its a nice heavy duty rail. The thing about this gun that concerns me is the fixed angle front sight. It gets in the way of a scope, or optic. Does the barrel need to be swapped out in order to get rid of that? Should I keep or scrap that also. It's not the biggest deal in the world, I can live with it.
>>30563370
>Nice work
Thanks, but I won't be satisfied with it until I can use it to teach my kid half-bro to shoot. Half the reason I am doing this is because I'd like other people in my family to be able to use it if/when needed, instead of lending them something that will kick the shit out of them.
That means in the near future I'll also be putting an RDS or low-power glass on it.
>>30563456
nice
>>30563278
Yeah man it's in the mail and on its way nig
>>30563335
>I earned that mark
MFW
>>30563484
>other people in my family to be able to use it if/when needed
I hear you. The political and social situation is fluid these days.
>>30563506
kek my hard earned shekels paid for it :^
>>30563462
I like them a lot. Some people don't. Its personal preference.
>recommendations
For single stage, SD-E. Its pure sex. For 2 stage, either SSA-E or MBT.
Single stage triggers have a shorter feel and are easier to shoot rapidly as well as being easier to shoot very accurately off a bench, 2 stage triggers allow you to pre stage for precision shooting in a tactical / high pressure situation and provide an extra measure of safety to retards.
I prefer single stage triggers for all forms of shooting.
>>30563335
Oh, I thought you were actually going to buy a handgun at some point.
>>30563527
That wasn't my thought, actually, but you're right.
I was just considering our cabin trips.
>>30563538
in 5 months
Aww yiss.
Is there a release date for the SB Tactical collapsible arm brace yet? I wouldn't mind getting my hand on one of them.
>>30563474
It gets in the way of the optic because it's a shit optic. If I were you I would keep the upper half exactly like it is but change the vertical grip for a KAC grip and get a sure fire M951. Get an Aimpoint PRO with lower 1/3 mount, a Matech backup sight, change the stock to a SOPMOD, change the grip to standard A2, and you would more or less have an M4 SOPMOD clone.
>>30563550
>tfw 24 in a few days
>>30563571
next thing ya know you'll be 30
pupper turns 1 tomorrow
>>30563474
A lower third cowitness mount (available/standard for all quality dot sights) will allow good sight picture with a fixed fsp. They do not noticeably interfere with magnified optics, you get a very small blurry spot on the lowerst point and thats it.
If you choose to remove the fsp, you can either dremel through the sight tower and create a ghetto low pro gas block, or remove the flash hider and knock out the taper pins on the fsp and slide it off the muzzle. It doesnt require the barrel being removed.
If your flash hider is pinned and welded you're pretty much screwed unless you want to get the flash hider cut off.
Cmmg makes good barrels. They're not super premium but there's no reason to trash it.
My kinda thread.
I bought an sp1 today for $550, today is awesome.
>>30563630
pics
Question about shortie ARs. (12.5, 10 inch, etc)
Do these things belch fire like crazy?
How effective are 55gr and 62gr out of these lengths? Seems like the 55gr would fail to fragment at those velocities (2500-2700 FPS, right?).
Does everyone run 75-77gr in these lengths?
>>30563603
>turn 40 before 2020
Fug
Its amazing how a year feels like no time at all now but felt like an eternity when I was in school.
>>30563531
STOLEN VALOR
T
O
L
E
N
V
A
L
O
R
>>30563565
Not really interested in a light, Should I be? For the lower 1/3rd mount is that just a mount to make the optic higher? Also not looking to make it a clone of anything really, would I get more badass points if I did try and make it a SOPMOD? Not a fan of the A2 grip either, I have one but the houge is comfy.
>>30563618
Not concerned about seeing a bit of the front sight. One concern I have is if I make the optic higher, then I wont have a place to rest my cheek, right? Or is that not a big deal?
Thanks for all the help
>>30563639
Shorter than 11.5 and velocity drops off rapidly. 10.5 can just barely cross the 2700 fps threshold for fragmentation
>>30563678
in other words, they're useful basically in a house
You can jam with them jammers
Blam with them blammers
ACOG soon I think
>>30563639
M193 will fragment out to 75yds when using an 11.5" barrel. It doesn't reach reliable fragmentation velocity out of 10.5" barrels. 62gr M855 is not very effective out of a 20" never mind 10.5". 77gr MK262 is the preferred round for short barrels, though I use 60-64gr soft points.
>>30563639
>do these things belch fire like crazy?
Depends on the load, but it runs from kinda to fuck yes.
>55/62gr effective?
At HD/MOUT ranges yes, but not much beyond that.
>77gr?
Most effective of the military loads (125-175 yards), still inferior to softpoints and frequently more expensive. Many softpoints will expand enough to be effective down to 1700fps and a few will do so down to 1400.
>>30563559
widdle baby G rail, so cute!
>>30563247
I'm looking for some creative ideas for shooting competitions for an even I'm hosting in August in Nevada. Anyone have any good ideas?
>>30563670
A lower third cowitness isnt that tall, you still get a decent cheek weld. Absolute with a folding front sight is better, but whether it's enough better to justify the expense of replacing an A2 is a personal decision.
>>30563670
If you plan on using the rifle for any sort of home defense or combat scenarios, a light is a must have. Something like %85 percent of all self defense shootings happen in low light. Lower 1/3rd co-witness just raises the sight a little bit and doesn't affect cheek weld much. You would definitely get badass points for making a SOPMOD clone.
>>30563731
*event
>>30563635
I'll post pics when I'm home, don't worry. I need another rifle to shitpost in every thread. :^
>>30563731
Chupacabra silhouettes sticking out of bushes.
Texas star or dueling tree offhand at fairly long range (150y rifle, 20-25y handgun).
SASS style stage
Long range precision from prone--8" target (gong, disposable pie plate) at 700m scoped or 300m open sight (150/100 rimfire)
>>30563731
Targets that secretly contain tannerite
>>30563735
They are fucking expensive. Just to raise it a little bit, I'm not sure if i'll go with a lower 1/3 or not. Maybe later in my AR owning life.
>>30563740
If I get badass points i'm all for it. I'll have to invest in a good optic then, which I was going to anyway. As for the light I have light mounts and a good light, but i've felt this AR with a light attached and it is not pleasant to hold. I'll have to ponder a bit more, maybe get a lighter light. I can swap out the grip, the houge one is comfy but it spreads out my fingers a bit too much if i'm being honest. I already have a classic A2.
Have any pics of true SOPMOD's that I can save?
>>30563711
>still inferior to softpoints
Neat. What are the best soft points for 5.56? Is TAP still considered among the best?
>>30563278
>>30563292
Are these 18-inch barrels?
I'm trying to decide what length of barrel to put on my first AR build from parts. I'd love to have a chance to hit marks at 300 yards and practice for that distance - I would definitely need to get a longer barrel than 16", right? Would I want/need to get a 20" barrel?
>>30563535
>I prefer single stage triggers for all forms of shooting.
Interesting. I've been doing research on some triggers and on a bunch of forums everyone talks about how they can't go back to single-stage after firing a two-stage.
I'm torn between this ALG ACT tuned by Geissele:
http://www.joeboboutfitters.com/ALG_Defense_Combat_Trigger_ACT_Tuned_By_Geissele_p/alg-act.htm
for 65$
or
the rock river arms national match two-stage
http://www.joeboboutfitters.com/RRA_Two_Stage_Match_Trigger_Kit_AR0093NMK_p/rra-ar0093nmk.htm
for 100$.
Any thoughts on these? The sense I was getting online was that the two-stagers were more accurate. Any truth to this statement?
>>30563792
Here have an entire thread full of them.
https://www.ar15.com/mobile/topic.html?b=3&f=118&t=610057
>>30563644
yikes
>>30563668
STEAL THEIR POWER
>>30563814
Actually viewing it right now. I have one of those bipod-grips laying around. Should I use that instead?
>>30563838
>>30563668
Steal their discounts
>>30563796
kys newfag
>>30563796
64gr Speer gold dot and 62gr Federal tactical bonded.
>>30563850
yes
>>30563247
If I have an AR I want to use for a little longer range shooting, can I stick a longer heavier barrel on it and get decent results, or is there more to it than that?
>>30563796
Your monolithic hollowpoints (barnes, hornady gmx, nosler e tip) in the 62-70gr range are the best by a fair margin.
Anything loaded with the Speer Deepcurl (fed fusion, fed LE barrier, speer gold dot) would be my #2, the softpoint TAP third, winchester 64gr powerpoint fourth.
All of the Barnes bullets (tsx, ttsx, tac x, tac tx) perform very closely to each other.
Poly tips have better BC. Fairly flat tipped softpoints (speer deepcurl, nosler protected point and bonded) deflect less off windshields.
>>30563885
Consider it done. My dad got it from some SF in Iraq, and brought it home. Has a bit of hockey tape on it for grip, I guess.
>>30563786
>Targets that secretly contain tannerite
Mind reader, that was one of the events I was planning. Like a game of chance, which shooter will set off one of the random tannerite targets first.
>>30563779
>Chupacabra silhouettes sticking out of bushes
Kek, I like that idea though it's a tinder box up here so the range will be void of brush/bushes.
Texas Star/Dueling Tree/SASS style sound like fun.
>>30563850
If your're gonna go with Block 1.5 get a KAC 300m micro rear sight on ebay for like $50. It's better than the Matech.
>>30563930
I kind of like the read sight, It has a tiny button on the side that flips it up.
What's the /k/onsensus on the Vortext StrikeFire 2? It would give me a lower 1/3 cowitness.
>>30563972
It's good but the 4moa dot is too big IMO. Get a Primary Arms advanced micro dot or a Holosun with ACSS reticle if you don't have your heart set on a 30mm tube red dot.
>>30563796
Speer Gold Dots are super cheap on PSA
>>30563811
From a tactical shooting standpoint they have their merits. They are objectively inferior from a pure accuracy standpoint though.
A single stage has less takeup and can be made lighter safely. This is a good thing for calm precision shooting and a bad thing for combat.
The ALG is a nice, basic two stage. However, it is significantly inferior to the more expensive ones. The MBT for $125 would be a hell of an upgrade from it.
The RRA is a purpose built competition trigger. Feels very good, but in order to be CMP national match regulations it's a bit heavy. I don't like it.
Any good deals on xm193?
>>30564142
http://www.sgogunsandammo.com/product-p/xm193i.htm
>tfw no NFA toys whatsoever
:(
How is Aero Precision's LPK? In particular vs Anderson's and Strike Industries' offerings
>>30564073
Thanks, I'll keep that in mind. The ALG I linked is actually a single-stage; not sure if I've seen their double stage.
I'd love to get the MBT but I'm impatient and don't want to wait the 8-10 weeks haha.
Actually, might just use the basic trigger from a parts kit to get started, and then upgrade to the MBT later on... Thanks for the feedback!
What length barrel do you usually use, out of curiosity? Can you recommend a manufacturer?
>>30564181
I shoot everything from 10.3 through 24 for 5.56 and 7.5 and 16 for .300blk.
I definitely believe in and endorse buy once cry once, especially with your key components.
>>30563247
In
>>30562922
>>30562906
>>30562872
Why do you act like I don't own one?
Fucking newfag
>>30564258
Because you never post photos of a whole AR, just parts.
>>30564258
>dosent post it cause its the poster child of awful ARs
>>30564258
>>30564292
Where is his ar?
>>30564181
As an addendum, a mediocre single stage is worse than a good two stage. And vise versa.
>>30564306
In the custody of the CHP most likely
>>30564342
lmao
I think he has everything but a lower receiver
>>30563811
My AR has a 16 inch barrel. The PTR is 18 inches.
Is there any reason to get an 18" barrel over a 16? The velocity of the bullet at the muzzle is like 50 less
>>30564351
No he has a complete rifle he hasn't posted in like 4 months
>>30564473
Depends on the load, whether you handload, and several other factors.
>77gr Varget handloads have an almost 200fps difference between 16 and 18 because Varget is slow
>>30564351
here it is
>>30564537
Thats not a rifle though, thats a bird sitting on a heap of shit
>>30564549
>>30563247
>>30563247
These are sexy af tbhfam. Might be the sexiest I've seen.
>>30564581
How much?
>>30564606
$250....unfortunately
What does /k/ think about a side charger bolt and upper receiver?
Thinking of making my next rifle with this kind of setup, only thing Im concerned about is the lack of a dust cover for going innadesert
>>30564581
>>30564606
Thats just a kac micro front and 300m rear.
You could put a set together off ebay for like $160
>>30564633
So put your own dust cover on it, make it slide up and down like a galil or FNC dust cover
>>30564633
Dumb.
>reciprocating
>unbalanced with no rails=gas key wear and potentially failure to into battery
>no dust cover
>>30564633
you wont get much appreciation for it here, they're memes.
that LAR is especially ugly, that rear screw "hole plug" where the old charging handle goes
>>30564633
I would personally go for the non-reciprocating upper, it also only requires a different cam pin.
Also, why does clover keep telling me I'm fucking banned? I don't shitpost that much.
>>30564663
>>30564658
>>30564653
Thanks for the advice guys, I'm about to finish up my a 5.56 build and was looking into some things to add to my .308 build. It'll be my quirky special snowflake build
>>30563889
>>30563889
JUSTABURP
I love that Haley strategic picks the stolen valor sight over any other
>>30564537
>>30564549
lmfao
Army: the way we fight is changing,
we need a new gun. We need to hit targets at longer range, targets that may be in body armour. We need to attach three pounds of lights, cameras, sights and lasers to it. We have done some research, lots of research in fact and this is our short list.
Pentagon: ok, write up what you want and we will do the science thing and the testing thing.
USMC: we want to have a say.
Pentagon: nope. You get cast offs like always.
Navy: specify powder cost, not just anodising and some brass fittings that the sailors will have to polish every day.
USAF: What colours will it come in?
Army: this is what we want, reliable, rugged, accurate, easy to use and adaptable. In that order.
Pentagon: we reserve the right to add cheep at the top.
Army: grumble grumble.
Airforce: we have to have ten round magazines and a bullet button versions for the baces in California.
Pentagon: here it is.
Army: wait, don't we get a say in what you buy us?
Pentagon: we already signed the contract for five hundred thousand of them and well there is this senator that we owed a favour to and than Colt has this legal sword of Damocles hanging over us from the last contract fuck up. They have been paid up front to deliver a fifty thousand a year for the next ten years plus parts, tools and training.
Army: this is the same rifle as we took to Viet nam. The rifle keeps jamming, brakes when you look at it wrong, the gas system weakness prevents the use of advances ammunition, it can't hit a man at three hundred yards, the pissy little round can't drop a man with one shot and the ergonomics are so bad that soldiers dislocate fingers changing mags. It was not even on the short list.
Pentagon: but we are getting five of these for the price of four of those rifles that you had on your short list. Tell you what, we will let you add stuff to it as long as you don't change the body, barrel or internals. Contract conditions don't ya know.
Army: grumble grumble
USAF: black is too threatening, can we get it in blue?
USMC: yo bob, get all the old A2 rifles from the army and recondition them. Even second hand, they are better than the new gun.
Navy: nope nope nope. Ok well go with 12g for boarding and use MP5ks for everything else.
Pentagon: um, guys, we sort of have another problem.
USAF: I resent being called a "guy"
Pentagon: not now ladies.
Pentagon: that sight you wanted, well it turns out that we did not do the science and testing thing properly. Sorry, but we spent so much money on dinners for Colt reps that we did not have enough to pay a decent contractor to test the sights and had to go to India.
Army: oh, great. Now what do we do?
USMC: ha. We don't use that sight anyway.
USAF: you mean the sight may hurt some one?
Pentagon: no, no, it is just that the sight is not waterproof, can't hold zero and you can't see through it anyway.
SAF: you mean the sight may hurt some one?
Pentagon: no, no, it is just that the sight is not waterproof, can't hold zero and you can't see through it anyway.
Army: oh goody. This is just so good.
USMC: ha.
Pentagon: stop complaining. You have a new rifle. You have a new sight. And all just in time for the draw down in Afghanistan.
Army: The rifle is a carbine. It is functionally the same gun we used in 1966. The sight is just as bad and you are sending us back to Afghanistan.
Navy: who cares, we just got another aircraft carrier. The name sucks dog balls. Who can't we have cool names like the Royal Navy, Warspite, indomitable, iron duke, dreadnaught. They are cool names.
USMC: hay army, want to borrow some ACOGs?
How should I paint my new target stand fellers
>>30564793
green
>>30564793
predrill before you screw it jezus
>>30564800
I have two greens
>>30564812
You like that :^
I'm not worried about it, just shit I had laying around.
>>30564258
Love my alg rail
>>30564793
kill yourself my man
>>30564832
>buying a cringe lower
>>30564840
why my man
>>30564793
>>30564764
>>30564780
>>30564787
armyfag here. you summed it up nicely and gave me some much needed keks
>capped for future use
>>30563635
Here it is.
>>30564905
Mos ?
>>30564848
>says the guy with the cuck lower
how the hell do i get started with ar's
just got a sweet new job and am now rollin in the dough, I dont want to spend time researching/building one yet, just want an intro into the rifle. I was thinking about picking up a DPMS TAC2 or Colt 6920 MOE, any advice?
>>30564764
>>30564780
>>30564787
>>30564633
If you're going to do that get a Gibbz
>>30564934
>>30564944
do not listen to this guy, he's a skinwalker
buy a radical firearms
>>30564946
is that a gunfighter cut hardhat?
>>30564934
PSA lower
BCM upper
I'm going to duck tape over the screws guys don't worry
>>30564793
Oh god pb. Please tell me that this is bait..
>>30564962
Question. What kind of longevity can I expect from my AR receiver? I started with a stamped AK, so I am used to the idea that one day, AK will beat itself to death and die in my arms.
Anyone tried out a Steiner m536 or m332? They seem like a good ACOG alternative but I'm open to other suggestions
>>30564641
I don't think so, Tim
>>30564979
why bait senpai
>>30564996
Literally more than 15'000 rounds
>>30564975
>>30564996
From the receivers? Probably 10,000 rounds or more. That's just a guess. It'll take forever and you probably won't have enough money to spend on the ammo
>>30564848
>>30564926
I think it's hilarious. Wanted calico jack but OOS. Makes me laugh everytime though.
>>30564793
That's just lazy
>>30564926
what did you say giddy?
>>30565022
I put a lot of effort into that m8
>>30564997
If you can't afford an ACOG, get a PA 5x or 3x prism optic.
>>30564934
>>30564962
>>30564944
give me models to buy man. say i got 1200 bucks, what would you buy, and where do you buy lowers online?
>>30563247
I'm looking for a gun lower that is FULLY ambi, that means a bolt release AND bolt CATCH on the right side. Why? Don't worry about it, I really just need to know my options. The only options I can find are LWRC and the ADM UIC lower.
The ADM UIC receiver set weights like 1.5 lbs, isn't that too heavy?
LWRC Lowers are impossible to find, should I just buy a LWRC M6IC-DI? I would still need to buy a nicer trigger for it and maybe a stock. It should have a nicer trigger at that price, IMHO.
Really, I just wish their was a light weight TRULY ambi lower out there...
>>30565074
KAC
>>30565033
>GDI
worth the ridiculous money?
>>30565106
It was $50. It feels nice and came in a cool pouch but I haven't shot with it yet.
>>30565088
That only has an ambi bolt release, not a bolt CATCH, right?
>>30565126
Why would you need the catch to be ambi?
I need a new AR15 case/bag. something relatively discreet.
>>30565136
Didn't you read. Don't worry about it m8
>>30565139
Haley Strategic Incognito
>>30565122
Was that the one that was dirt cheap a month back?
Does it look like the real deal? I'm curious now, since I shit on it so hard for probably being fake.
>>30564997
Steiner is owned by Beretta
do you trust Beretta to make good optics?
Why not buy American?
>>30565146
out of stock
>>30565148
Yeah. I'll take some more pics
>>30565152
pelican
>>30565136
I really don't feel like hashing this out for the millionth time. IS there a reason NOT to have it ambi? Then that should be a good enough explanation for you.
I don't want the new KAC proprietary bolt/extension anyways.
>>30565139
telescope case
>>30565139
Pistol or SBR separated into two halves in a backpack.
>>30564996
Probably more like 100,000 rounds or more.
>>30565139
Voodoo innovations
>>30565162
maybe law adapter
>>30565146
>>30565156
actually it looks like my rifle would fit in the smaller bag (which is in stock) while assembled. I'd prefer a soft case.
>>30565161
not a bad idea
>>30565162
way too ghetto
>>30565068
Spike's tactical, BCM, Daniel Defense, Noveske, Bushmaster, Colt, Lewis Machine & Tool probably offer an AR too, I donnow.
Aero precision?
So I want to get my friend an 80% lower for his birthday however he wants to build a fairly accurate M16A1 clone which requires a phosphate coated lower. Is there anywhere that sells phosphate 80% lowers or a service that does reasonably priced phosphate coating? Complete lowers are out of the question because we live in a shit state with no private sales.
>>30565068
Welcome to the wonders of free market capitalism.
There are over 100 well known and respected companies making parts for AR-15 rifles.
Many of them also offer complete rifles, take your pick.
>>30565074
>I'm looking for a gun lower that is FULLY ambi
www.tealbluebravollc.com/
Here's an ambi catch you can install yourself.
>>30565191
utg incognito
>>30565201
A1 lowers are different than any %80 lowers you will find.
>>30565068
Buy this upper
http://www.bravocompanyusa.com/BCM-BFH-14-5-Mid-Length-ENHANCED-Light-Weight-p/bcm-urg-mid-14bfh-elw-kmr-a-13.htm
This lower
http://palmettostatearmory.com/blem-psa-str-complete-lower-receiver-black.html
Spend what's left on optic
>tfw missing 4 mags
>>30565234
>$40
>>30565225
nodak spud
>>30565219
I already saw that. I would prefer not to cut up a nice receiver.....but I guess if I have to. You would think that the AR market is so big that even a niche item like the lower I'm looking for would be made by at least one company.
Is it worth it to cut up a receiver vs the other options I listed?
>>30565148
Here is the pouch
>>30565221
>haley long bag is out of stock
>short bag is 31" long
>my rifle with stock collapsed fully is 33"
>>30565156
Cool, I might buy a couple to get rid of my ARMS mount and get a better eye relief for the Aug
.>>30565201
Nodak spud does a1 %80's
>>30565225
I know, luckily he for some reason doesn't care about having a fully accurate lower so I don't have to buy one of Nodal Spud's over priced $130 80% A1 lowers
>>30565259
Why does everything ALWAYS say patent pending
Anyone got a recommendation for a basic bitch complete upper? Was going to go with a PSA or Aero but they're out atm.
>>30565234
What? Did someone steal your magazines? What happened?
>>30565263
kek get fucked
>>30565269
here is the side
>>30565246
>>30565269
Expensive and uncoated, I even emailed them and they said that all their 80% versions were out of stock until fall and theyre uncoated
>>30565272
Because you can get patent protection until it's approved.
But the product has to be marked.
I think it's called a "provisional patent" or something.
>>30565263
DREMEL
R
E
M
E
L
>>30565272
the patent is pending, pretty basic English m8
>>30565160
yes you do
>>30565290
no u
do they make a pelican with eggshell foam?
>>30565282
PSA shit restocks and sells out really quick, just watch for their daily deals
>>30565319
Oh I am lol. I'm on vacation right now, so I'm checking it just about hourly.
>>30565308
I don't know if pelican does but I'm sure you can buy eggshell foam that will fit
>>30565302
$300+t2
>>30565259
>>30565290
I'd venture to guess that its the real deal then.
Cool. Cheap mounts ordered.
So since my MRO mount isn't Gucci, what should I get?
>>30565343
you are crazy. did you call the shop here?
>>30565344
LARUE. Do ya like the mro? I'll prob get one for my pistol
>>30565302
No thanks, actually.
SO I guess I'll cut up a perfectly good lower, FML.
>>30565358
I do, it fits my needs perfectly and it isn't Aimpoint Micro tier expensive.
>>30565358
i will pay for convenience
>>30565302
man that's some cool airshit
So no opinions on the LWRC M6IC-DI? Worth the price considering I want the right side catch?
>>30565372
Glad to hear it, I'll put it muh list.
>>30565383
I would buy the one here for ya but can't senpai
>>30565434
it's cool, i would buy it today but i won't get payed until Wednesday
>larue sells a $240 soft case
what the fuck.
Anyone know of any good deals on budget ARs?
M&P Sport II was on sale for $550 at gunbuyer about a month ago but I slept through that one...
>>30565458
Does it come with a 100 dollar gift certificate
>>30565458
black trash bag
>>30565293
then get em to ship them to a coater. Literally no one else makes retro 80%ers
>>30565458
Sigbro has it iirc
>>30565473
Don't know why more people don't do this
>Paypal won't transfer funds to my account until Monday, at the earliest
Fucking Jewery, MI better not send me an e-mail telling my FF rail is on backorder after I finally order it next week.
is it ridiculous to spend $450 on an ap15 lower?
>>30565556
its goat boy I haven't seen you post in a while. also fuck you now I have an odd new fetish I don't like..
>>30565565
100%YES especially if it's a stripped lower.
the kac is $7-800 but comes with a great trigger and great stock
>>30565571
>now I have an odd new fetish I don't like..
You like it, you just don't want to admit it to yourself. :^
>>30565556
>556
Fuck paypal
Hold your rail for letsgo please
>>30565582
Yeah it's stripped. I would be importing it and the fee is $300. That adds extra gucci points right
>>30565582
And an A2 grip
>>30565587
once again fuck you for giving me mental aids I already had enough mental stds in my head. all I wanted was guns
>>30565600
no, it just makes you look dumb.
>>30565608
and a castle nut
any way my next door neighbor worked on this
http://www.gyrodynehelicopters.com/gyrodyne_memories.htm
he was a machinist there
>>30565621
A 2
2
![WP_20160311_001[1].jpg](https://i.imgur.com/tUQlzER.jpg "WP_20160311_001[1].jpg")
>>30565458
What's it offer over Pelican?
>>30565600
No, it's still a stripped Aero.
>>30565628
i don't disagree
Is 6x generally regarded as enough for SPR purposes?
My goal is to hit a clay pigeon at 400 yards but I worry 6x will be too little
If it will be ok i might just get the strike eagle
>>30565645
"Clay pigeons"
>>30565621
rip anyways I guess a lower does not fall under """sporting purpose""" so it cannot be imported
>>30565642
Yeah but it has the 2nd greatest roll mark
>>30565645
http://www.primaryarms.com/pa1-8x24sfp-acss-556/p/pa1-8x24sfp-acss-5.56/
>>30565645
3-9
l
9
>>30565556
If your rail hasn't sold by the time the funds clear in my paypal account close the listing and gove me your PayPal address. I will then send it without going doing an eBay sale. That way the funds should be available immediately. Btw fuck PayPal pic related
>>30565593
thats not how capitalism works.
>>30565632
You did a hack job on that case
>>30565653
>I work at a shitty pet store for minimum wage under the table because my mom stopped buying me tendies and my stepdad was tired of my whining
t. You
>>30565660
Leupold vx2 3-9 then?
What's your suggestion?
![WP_20160604_003[3].jpg](https://i.imgur.com/FmEIosi.jpg "WP_20160604_003[3].jpg")
>>30565661
Have you been looking at the listing several times today like a total sperg or am I getting genuine hits?
>>30565556
my rail is back ordered, its been 2 weeks they said 1-2 weeks until it ships so I'm gonna call monday and ree on them
>>30565565
yes.
I think I'm gonna go with one of these tactical tailor bags. I like their pouches
>>30565632
has a larue logo on it.
I'd get a pelican but I dont want to be tied to one rifle for the case or needing to buy new foam when I change shit
>>30565658
That's just a tad out of my price range. I want to get this gun done before the shilldog becomes president
>>30565701
Eat ramen for a week, it'll be worth it.
I can't believe no one told be about pic related, considering what I was asking for....
Too bad I can't find any for sale.
Plz no bully...
It's ugly but it works
Before anyone asks the weird black thing on top is a See All Nite Sight on a riser. In front of that is a microtac, and yes I have a TLR3 on the side at least until I get the XC1 I crave.
>>30565689
Just don't cut the foam
>>30565701
I would wait on glass. If optics get banned we have a bigger problem to worry about
