Enjoying the Chaos Edition
Old thread; >>30280269
>>30283628
>>30283628
have prices already skyrocketed ?
>>30283642
>>30283648
>>30283656
>>30283659
>>30283669
>>30283679
>>30283684
>>30283689
>>30283705
>>30283709
>>30283716
>>30283720
>>30283726
>>30283736
>>30283740
I just panic-bought two 6920s at Bud's.
$1635 shipped & insured for both.
How'd I do?
>>30283744
>>30283752
dummy
![WP_20151211_007[1].jpg](https://i.imgur.com/cbQms7Z.jpg "WP_20151211_007[1].jpg")
>>30283752
It's aight.
Hey fuckface, this isn't imgur
>>30283754
>>30283764
>>30283765
Dat Jack
>>30283769
![WP_20160521_007[1].jpg](https://i.imgur.com/Vw0qfqL.jpg "WP_20160521_007[1].jpg")
>>30283764
It's not like he has an AR of his own to post. :^
I think it's cute.
I grow tired of this buttstock, fetch me another /k/
![WP_20160521_004[1].jpg](https://i.imgur.com/Y5zLYD4.jpg "WP_20160521_004[1].jpg")
>>30283781
https://www.magpul.com/products/str-carbine-stock-commercial-spec
>>30283781
B5 sopmod, obviously
>>30283781
>commercial spec
pig disgusting
>>>30283790
already had 1, it was okay
Im leaning towards the SL-K from magpul
>>30283752
>two 6920s
>$1635
That really isn't terrible, but you should still have ordered two more worthwhile uppers+any lowers for less in total, instead.
>>30283781
interested in a BCM Gunfighter? 45 doll hairs shipped. Been a little wet but it good condition.
>>30284011
>PSA rifle
>Water
That was stupid.
>>30284027
>what is chrome lining
>>30283762
Ha! Enjoy your Anderson.
>>30284275
thanks
>>30284308
lol @ pistols
>>30284344
lol @ stamps coming back any day
get fucked retard
Do any of you know if there's anyone who makes an A1 style upper with a brass deflector (C7)? Thinking about making a retro carbine. I've seen that DPMS used to make one, but I don't think they do anymore.
>tfw too poor to free float
>>30284403
It'd be easier and cheaper to just get an A1 upper from Brownells (just make sure they didn't fuck it up)...why specifically do you want the C7?
>>30284514
FF handguards cost about as much as decent drop-ins these days.
>>30284514
How exactly do you afford ammo?
http://www.bravocompanyusa.com/BCM-Standard-16-Mid-Length-ENHANCED-Light-Weight-p/bcm-urg-mid-16elw-kmr-a-13.htm
>>30284385
You still live in abject poverty.
Panic buying? Is that a thing still?
Is 20 inch worth it?
Seems like if SHTF it would be a slight bit more of a pain to use in the thick woods around here
>>30284689
it worked in vietnam
>>30284689
Over a 16"? Not really.
>>30284689
Depends? A1 handles really nice. A4, not so much.
It's for you to decide whether the extra 50-ish yards of reliable frag threshold with M193 is worth it to you. Personally I don't think so.
It's time I bought a light for my blaster. What should I get? Are pressure switches meme teir? And what about mounts?
>>30283752
I mean, not a bad price, but not a very good rifle.
>>30284820
Post your rifle, and I'll tell you the best choice for it
>>30284856
Forgot to put trip in
>>>30281616
To make a depends how close you want to get your clone. You can go exact, or you can get close enough that all the important parts are covered.
For a "close enough" clone. Get a prebuilt rifle like a 6920 or an M&P or someshit with a front sight post. Then get this handguard as an acceptable substitute for the KAC RAS. http://midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=64
After that you'll want to get a Matech backup rear off of Ebay for like $3-40. And a sling adapter that goes under the FSP. Figure out how to rig that sling up. I never actually did it myself.
You now have a basic bitch M4 clone, minus an optic.
If you want to get a real deal optic, you'll want either an Aimpoint Comp M4, or a Trijicon ACOG 4X RCO.
If you are looking for a "close enough" optic, a Primary Arms prism scope or a Vortex Strikefire 2 will be fine.
Need a few more things to finish up my AR build:
Sling, Red Dot, and foreward grip
Thinking about getting the VTAC sling?
Probably a Sig Romeo 4
And some angled BCM grip
Would these be good purchases or can I get better brands/options
Just got a LPK to match my new stripped lower, a MAGPUL MOE stock and a 16" 1:8 5.56 NATO barrel and ordered an upper receiver.
Slowly it's coming together.
P
>>30284892
>Sig Romeo 4
>$300
Might as well buy a Micro clone that doesn't pretend it was not made in China for pocket change.
http://www.primaryarms.com/primary-arms-advanced-micro-dot-with-push-buttons-and-up-to-50khour-battery-life/p/md-ads/
>>30284875
Get an Arisaka 300 series light with one of their keymod mounts, use it for a while, and decide later if you want a pressure switch.
>>30284892
Sling: D3, Vickers padded, Magpul, Vtac padded
Red dot: PA advanced microdot, people also like the Vortex sparc, and the holosuns, but I don't have experience with them.
Foregrip: It doesn't matter. Get whatever you think looks cool or comfortable.
>>30284955
Thank you. Putting an order in now
Should i go with Government profile or the Faxon Gunner profile?
>>30284955
>>30285020
Nevermind. Out of stock.
>>30284892
BFG Vickers padded
Aimpoint
BCM is good
>>30285047
SF or nothing tbhwyfam
![WP_20160521_013[2].jpg](https://i.imgur.com/P8dt99m.jpg "WP_20160521_013[2].jpg")
>>30284820
>What should I get
Surefire
>Are pressure switches meme teir?
It's kind of nice being able to control when your light is on without having to move your supporting hand.
>What about mounts
Depends if you want QD or bolt-on. QD is QD, but also tends to be bulky. Bolt-on is not QD, but is also lighter and has a lower profile.
>>30285041
Government profile is literally born of molecular grade idiocy. Any alternative is better.
![WP_20160525_003[1].jpg](https://i.imgur.com/VrRc6dO.jpg "WP_20160525_003[1].jpg")
>>30285104
>Muh barrel whip!
>>30284084
How expensive was chrome lining and what parts need it?
>>30285116
The human ability to come up with elaborate explanations and justifications for design choices that weren't up to them truly is amazing.
![WP_20160604_016[1].jpg](https://i.imgur.com/tpcLAdE.jpg "WP_20160604_016[1].jpg")
>>30285151
>How expensive
Literally an industry standard that is only ditched for autism-tier accuracy and shit-grade poverty builds.
>what parts need it
Barrel
>>30285116
Like he said, molecular grade idiocy.
In an era of muzzle brakes being widespread and generally accepted there is no reason to hang an extra pound off your effectively pencil barrel for almost zero gain.
In the era of the A1 birdcage it provided an extremely slight reduction to muzzle rise.
Guys guys guys why shouldn't I do this and sell / don't use the other parts
Can keep barrel and gas system
Why is that a bad idea?
>>30285047
Check eBay. You can also get a SF M300 on eBay for a decent price, which is what the Arisaka is modeled after
>>30285072
>>30285094
Which surefire model? HD shtf gun.
>>30285217
Which one?
>stainless 18"
It's a garbage barrel is why you shouldn't do it.
>pistol/SBR upper
It's a shit handguard and the barrel is well below minimum effective length for 5.56
>>30285235
That answers my question. 18"
>>30285234
Whatever you can afford.
>>30285217
Literally just go buy a barrel, its cheaper and isn't some bargain bin bullshit.
>>30285267
Alright.
I know you're one of the poors and prone to bad decisions based on money, but lemme drop some learnin' on you.
>if you're trying to build an accuracy gun, an accurate barrel is going to cost a lot of money
>If you're going to buy a stainless barrel, it needs to be Hart/Brux/Bartlein/Krieger/Pac-Nor/Lilja/Shilen. If you can't afford those, don't buy a fucking stainless barrel and stick to Ballistic Advantage or FN.
>>30285161
What gets me is that even a cursory glance at an A2/A4 without handguards reveals how fucking useless that added thickness is. They literally chose the most irrelevant location possible to beef up the profile. I love the
>"It's a heatsink!"
argument as well.
>>30285170
If you haven't read the 1986 Army report on the M16A2, I suggest you do so. Seeing an Army Research Institute official come to the conclusion over 25 pages that the USMC should never be allowed to design a rifle again.
http://www.dtic.mil/dtic/tr/fulltext/u2/a168577.pdf
>>30285312
I was looking at the larue stealth but saw their promo so I'd figure I'd at least ask
>>30285170
I believe what he meant was the common barfcommer argument that the extra thickness past the gas block magically makes barrel harmonics 1000% better, even though people involved in the A2 development have already admitted it was supposed to be a hotfix for an issue that turned out not to actually exist.
>>30285316
No, you don't understand, it was everyone else that tapered the barrels the wrong way since the dawn of firearms.
>>30285234
What can you afford? If you're poor/Kikefag, the M951 is by far the best option available, being under $100 on ebay, complete with a mount.
>>30285223
>>30285234
>>30285316
>Heavy Barrel. The light weight barrel of the MI6AI is prone to external
pressure, and our firing tests have revealed large differences in bullet
strikes based on these stress extremes, i.e., a hasty sling as opposed
to a bipod position with downward pressure (see Figure 13). It is proposed
that only sufficient weight be added to the barrel at the receiver and midbarrel
to help the barrel bend problem and that this be coordinated with a
more securely fastened handguard to help provide rigidity while retaining
light weight. A heavy barrel has been tested and there may be plans to
incorporate it as a preplanned product improvement if it proves to be adequate; however, the goal is not a heavy barrel, but the elimination of serious bullet
displacement resulting from various holding positions. Another consideration
must be to retain sufficient cooling air space, already reduced, between the
barrel and the handguard.
I certainly hope you're not trying to argue in favor of the current government profile.
>>30285357
>I certainly hope you're not trying to argue in favor of the current government profile.
I have been loudly mocking it for the past 15 minutes.
>>30285357
>I certainly hope you're not trying to argue in favor of the current government profile.
How in the fuck would you come to that conclusion?
>>30285377
>>30285378
Sorry was too busy laughing while reading through MSD's link to notice he continued on to shit on the gov't profile.
>>30285357
Speaking of this excerpt tho;
>A heavy barrel has been tested and there may be plans to incorporate it as a preplanned product improvement if it proves to be adequate
If this improvement hadn't vanished into the ether, I wonder how hilarious an M16A4 with a HB would have been to wield.
>>30285415
Well, I won't fault you for being distractedly amused while reading what is basically a flabbergasted weapons expert wondering who in fuck thought it was a good idea to let Jarheads design a service rifle.
>>30285423
Oh god...that would've been horrible.
>only people to use the A4 were POG's and Marines
Kinda would've been poetic justice though.
>>30285423
Mine was (is) a HB. With the M5 RAS, as I've said before, transitioning between targets is a KV-2-esque experience.
>hurr we need to stop force exerted on the barrel from having an effect on POI
>how about we thicken the 6" ON THE MUZZLE END????
>yuo are of genius!!1
USMC in charge of high school mechanics.
>>30285481
Who is this
>>30285462
Shitty.
Pic related is over 9lbs and transitions quite well because of where it's balanced.
>yes, I did manage to balance an angled magwell on a round object
Kinda proud of that actually
>>30285484
Guys who made that shitty goat game
>>30285493
How do you like the UBR?
>>30285511
I like it pretty well. It's heavy and I wish it extended just a bit further, but that weight provides enough counterbalance that this rifle is pretty pleasant to hold up for longer periods of time.
I certainly wouldn't want one on every rifle I owned, but I think it's an excellent niche stock.
>>30285498
>guise guise looks the guy who made a videogame looks like a nerd, who would have guessed xDDD
Tbqh I'd say he looks like a fag, but then I remember the /k/ yearbooks and "post your war face" threads and suddenly he seems a lot better.
Hello arg,
Just recently purchased pic related. Hasn't arrived yet, but I want some furniture for it. Very new to guns so any non-meme recommendations are appreciated.
Also, I'm using sportsmansguide to purchase everything since I have a free trial of buyers club + free shipping.
>>30285540
I think it's more along the fact that a grown ass man worships that's queers creations
>>30285569
Do you want a free floated handgaurd or no?
What's your budget?
Stock could be replaced with the Magpul MOE carbine stock,
https://www.magpul.com/products/moe-carbine-stock-mil-spec
And the handguard options are limitless
>>30285569
Magpul STR or CTR stock, or B5 Sopmod
MOE, MOE+ or MOE-K grip
Midwest drop-in handguard of your choice (preferably mlok/keymod), or if you feel adventurous, an Aero or ALG free-float handguard
>>30285540
> he looks like a fag
Pretty sure he's gay as all hell.
>>30285617
It was a way more worthwhile game than most of the multi million AAA titles that major studios have managed to come up with in the past decade, so he's good in my book.
How does one into AR...
Where do I start?
>>30285617
>Do you want a free floated handgaurd or no?
no idea what that is
>What's your budget?
$100-200, depends
I want the necessities
maybe a sight?
>>30285621
can you please be a bit more laymen with your suggestions, I'm a total retard when it comes to this stuff.
>>30285648
Lurk.
>>30285569
Magpul, BCM, whatever plastic fits your fancy. FF rail would be an incredible waste, spend money on a MPI and HP tested bolt.
>>30285647
Maybe. I don't know much about it besides the milsurp fag eats that shit up
>>30285648
Are you fishing for (you)'s?
>find upper that matches your needs
>buy accessories you want
>find lower with rollmark and stock you want
>buy Gucci aftermarket trigger
>???
>profit
It's actually p. easy
>>30285665
Free float means the handguard doesn't directly touch the barrel anywhere at all, drop in is what uses those little end plates you have now
For your intended purpose, it seems you will be find w/ the drop it.
So a magpul furniture set of your favorite color and maybe a red dot and sling and you will be g2g
>>30285665
Hahaha nvm, you need to lurk too.
>>30285692
thanks mate
>>30285694
I like guns but I'm not really interested in the culture. Just thought you guys could help me out.
Looks like I found a BCG for my build
http://www.bravocompanyusa.com/BCM-Bolt-Carrier-Group-MPI-Auto-M16-FDE-p/bcm-bcg-auto-mp-fde-ib.htm
>>30285692
No I'm really not. Past knowing not to buy pre-built I know nothing other than that I want one. Thanks though bro. Will start looking
>>30285665
Just look up the stuff on Google and decide what looks better, that's mostly what it comes down to between all of these. Stock and grip installation are vegetable tier, as long as you have a screwdriver (and preferably a hex wrench set) you'll be able to do both.
Anyway, if you have absolutely no idea what you're doing, then forget about freefloating. Just buy a drop-in carbine length handguard (that's the length that will fit your rifle) from Midwest industries.
Or, if you have no idea what to do with RAILZ, just keep the stock handguard, no need to get shit you won't use.
The main question is what do you want from your rifle. All of the "what buy" goes from there.
Anyway, $100 should suffice for the stocks and grips I listed. $200 will get you that and a handguard.
Sup senpai, anyone else hungry.
>>30285734
>not interested in culture
Then why are you here???
There are a million other forums that will spoonfeed you exactly what you are looking for, hell, a quick google search of those hard to understand "acronyms" would reveal a line of products that you are looking for.
Sounds like you should just go shoot your new gun first, git gud, then re-assess your priorities.
>>30285765
Thanks for responding.
What I want from my rifle is comfort. I've shouldered a M&P sport without an adjustable stock and it was waaay too tight. I was breathing sulfur the whole time shooting it. The ruger has an adjustable stock so I thought I was good there, but you guys are saying I should go aftermarket (if you could explain why that'd be great). I've seen stocks with rubber padding and I think that's what I'm looking for.
My biggest concerns are compatibility. I don't want to buy something that won't fit. It's my understanding that anything "ar-15, mil spec" will fit my rifle correct?
I've looked at the magpul furniture set and that looks like a good buy. Brownells seems to have what I need as far as that goes. I don't have any tools though, so a recommendation a tool kit would be awesome too.
Again, I appreciate your time.
>>30285817
I know the ins-and-outs of PC hardware and software but I don't browse /g/ because I'm not interested in the culture.
My brother comes here often and told me to head to arg for my questions, so I did.
>>30285871
>My brother comes here often and told me to head to arg for my questions, so I did
Your brother is retarded, start a thread asking questions or look for non general AR15 threads,
/arg/ is retarded tripfag circlejerk
>>30285876
kys
Just ordered my first lower to finally get that out of the way. In case something does end up changing from a legal standpoint, what should I be getting next for my build? I was thinking about a handful of standard cap magazines but I figured you seasoned ARfags would know better.
I would have bought everything in one go but I'm on a budget. Should have all the parts by autumn.
>>30285851
>if you could explain why that'd be great
The stocks I've suggested feel leagues better than the carbine stock the Ruger has from factory, and you can get a much better cheek weld with the STR or Sopmod. The rubber padding on AR stocks, if present, is mostly to provide traction between your shoulder and the stock.
It will fit, don't worry. The only mistake you might have made is buying a commercial stock instead of mil-spec, but that's increasingly less likely these days since commercial tubes are dying.
If you have absolutely no tools, buy a big, quality made bit set with flathead and allen heads and preferably torx and phillips ones, too. And a wrench like pic related (or a T shaped one).
>>30285897
fuck tons of mags, a barrel, pistol grip, and any adjustable stock.
>>30285316
>>30285337
>They literally chose the most irrelevant location possible to beef up the profile
the handguards provide bucking for barrel whip via coupling to the cap and delta ring, adding thickness under the guards will help with full auto fire as seen in the R0921HB though.
>>30285772
After seeing your rifle I lost my appetite.
>>30285772
Not really, planning on making chicken salad sandwiches with grapes and walnuts. Gona have a root beer float with it
>>30285569
>plastic D ring
>retarded front sight
>that muzzle device
>SRP 799
i hate ruger so very much
>>30285871
>I know the ins-and-outs of PC hardware and software but I don't browse /g/ because I'm not interested in the culture.
i can relate to this, ignore that asshole
>>30284562
Thanks for the input and sorry for the late reply. I like the A1 sights and sometimes I shoot left handed is all. It's not gonna kill me to not have the deflector but I was just curious since there's relatively little on the C7 uppers. The Brownells seems good, guessing it's the same as Nodak Spuds.
https://petitions.whitehouse.gov/petition/ban-ar-15-civilian-ownership
I signed this so that you cancerous tripfaggots get your rifles banned. It's already got enough signatures to warrant a response from the White House.
>>30286043
you're incredibly clever, what's your iq? 65?
![WP_20160524_010[1].jpg](https://i.imgur.com/vJzQl40.jpg "WP_20160524_010[1].jpg")
>>30286006
A couple years back you could reliably get C7 uppers, dunno why they're suddenly unobtanium. Only reason an anon here was able to get one was because I sold him the one I had collecting dust in a parts chest.
>The Brownells seems good, guessing it's the same as Nodak Spuds.
They are, but I seriously think they get NDS' blem receivers, if mine is any indication. There's also a couple imperfections in the milling. They were even retarded enough to send it without the dust cover rod holes drilled out, so be sure yours is actually complete when you get it. Brownells has been shitting the bed a lot lately from what I'm seeing.
>>30285940
>the handguards provide bucking for barrel whip via coupling to the cap and delta ring
No. The support they provide is inconsistent by the very nature of the components and their relation to the barrel. Remove all of them and I can all but guarantee everything will stay the same or you'll see a very slight improvement.
>>30286043
cool, i loaded all my mags and my guns are zeroed.
lets do this, family
>>30286043
>It's already got enough signatures to warrant a response from the White House.
lyl
A response along the lines of "that's nice, honey."
![WP_20160521_010[1].jpg](https://i.imgur.com/CRjGYKf.jpg "WP_20160521_010[1].jpg")
>>30286043
>Banning the most popular weapon in the nation with something like 10,000,000 in circulation
Lolokay. Not even responding to the b8post itself, just the very notion of that petition.
>>30286043
You mean the same White House that's been pushing for an AWB for the last 8 years and has failed to do it. If they couldn't push it through after Sandy Hook, what the hell makes you think it stands a chance now? Not that this is anything other than weak trolling.
>>30286096
You can't guarantee this without proving it. Show the math or stop making assumptions.
Their presence does indeed provide enough evidence to suggest they will buck forces. Negligible, who knows. But to say they don't do anything is conjecture.
>>30286119
>he thinks the white house will just dismiss a petition that they pretty much shilled for during the Orlando response video...
stay out of american politic.
>>30286133
I wasn't the one claiming their provide support for ""barrel whip"".
You provide the maths or fuck off.
>Start new job
>Finally have ability to build AR of my dreams
>Assemble my lower
>Waiting on first big check from job
I won't be able to order my upper for another few weeks. Motherfucker.
>>30286067
That's funny, that guy actually was telling me you might know about em when I made a short lived thread last night. I'll keep an eye on the Brownells, might be the way to go as long as they don't send out a turd. Thanks for your help man.
>>30286143
Yes, that's exactly what I think they'll do, as they've done with every single whitehouse.gov petition ever.
>>30286050
>>30286100
>>30286119
>In 10 minutes I get three butthurt (You)'s
/k/ is full of bluegills that go for the shittiest b8
>>30286067
>>30286130
GG for identifying the baitpost
>>30286145
the presence of 2 semi-rigid objects coupled to the barrel and receiver is enough to prove that they will do something. negligible or not, i can't prove without doing math.
did you not understand?
>>30286171
>haha I was only pretending to be retarded!!!
Trolled!!!
Retard.
>>30286171
hooray you did it! you baited on 4chan!!!!
>>30286161
Did he mention the cancer I sent with it?
Brownells might be the most optimal way of getting an A1-sight upper. Certainly the quickest, anyways. As said though, just inspect it after getting it, and if you see fuckery at play, give them a nasty call. Or write a negative review that gets you a phone call within 12 hours, which then is never "approved" for posting. Either way.
>>30286171
GG was for the other MSD post and not the A! picture upper. >>30286128
>>30286171
>i am teh le epin trole xDD
Yes, internet petitions an ocean away trigger me something fierce. :^
>>30286191
This only works when the first posts call it out. The first two (You)'s were
>muh 'iq', not even capitalized
>I'm ready for da gubment!
![WP_20160326_002[2].jpg](https://i.imgur.com/l3Go9Bu.jpg "WP_20160326_002[2].jpg")
>>30286193
Forgot pic
>>30286173
>2 semi-rigid objects
>they will do something
Yes, they will negatively impact accuracy. If they didn't there would be no point in free-floating.
Are you perhaps mentally deficient?
>>30286202
but they do, you've been bitching about your shit-tier country and how "even the slovaks backstabbed us".
you are easily triggered by things bitchboy
>>30285937
Thanks Anon. Which manufacturers should I be looking at for barrels? Any i should definitely avoid?
>>30286210
umm...how new to this are you?
all we do on here is troll each other, maybe you should go back to facebook.
>>30286219
negatively impacting accuracy because the user could impart force on the barrel with them isn't the same thing as 'not helping barrel whip' you mongoloid.
i know it's tough to figure out but if you think about it long enough you might be able to...
>>30286222
>I bitched about things that might mean confiscation of 70% of my guns within 2 years
>this means laughable whitehouse.gov petitions warrant the same response
Pass that jenkem, senpai.
>>30286148
What kind of upper are you looking at getting tripcunt?
Why do online retailers have a specific manufacturers parts cheaper than the manufacturer?
Are they deficient?
Am I being rused into expensive shipping?
>>30286227
not really any you should avoid, but Noveske makes the best "combat" barrels. Ballistic Advantage make good barrels for cheap and have a MOA guarantee.
>>30286241
>still has no math to support his original claims, other than "IT HAS AN EFFECT HURR"
Another proof anyone who uses the term barrel whip un-ironically is retarded.
>>30286249
Do any distance shooting with that yet?
>>30286193
>>30286214
Actually he did. Should have known it would be goat cancer. Probably just gonna buy it and if anything seems out of order, like you said, and phone call and some mean words should take care of that. IF anything goes wrong. Now time to go look for 4 position stocks.
>>30286236
New enough to remember the board before your trip started appearing :^)
>>30286271
Of course, not a ton though. I'm sure I'll put it to more use once the suppressor is released from prison.
>>30286272
> *a phone call
>>30286249
BCM 14.5 midlength KMR
>>30286279
i see, well kys
>>30286325
Mmmm, good choice. What barrel profile are you going with? Those BCM LW barrels are good stuff man, would be a perfect fit for a nice light 14.5 package like that. It makes a world of difference for comfort and speed.
>>30286295
Nice, it will be pure sex with a can. I'm ordering a pri best mod upper next month :^
>>30286248
and yet you want us to believe you're not triggered by governments taking peoples guns away?
you're doing really well at convincing us, keep it up slavguy
>>30286252
more specific pls
>>30286325
Noice, m80.
What's a good red dot under $100? (Preferably under $50)
>>30286355
Kind of jelly. I was torn, I love the look and feel of the mod 0s, but for functionality and weight had to go with the God mod 1. Either way, at least you didn't try to go with the abomination you refer to as a "mod H."
>>30286352
That's the plan. Just a basic, lightweight carbine with a microdot.
I also know Eric Kinsel personally through family connections, so there's a hope he might be able to give me the hookup.
>>30286345
You're a relatively new tripfag, so don't take things too hard.
Mmmm.
>>30286389
> good red dot under $100?
You're pretty much relegated exclusively to a basic Primary Arms microdot. Maybe the TRS-25, but little reason to get that these days.
> under $50
Doesn't exist.
Honestly, I'd advise spending $70 more and getting an MD-ADS, the improved battery life alone makes it worth the relatively little price hike.
>>30286389
Irons
>>30286391
iktf. I don't care for the weight as it will be a bench gun 99% of the time. after I get a can and cut the barrel I'll have a based modH :^
Needs more goat-boy, but I like mine.
spraycan day
what do you think guys ?
>>30286389
>good
Nothing really man. If you want the best possible red dot in that price range my money goes to Primary Arms.
I'd honestly stick with irons and hold out until you can get into the MRO price range at least though. Cheap red dots will take care of you for close stuff just fine, but adjustments get suspect when trying to fine tune the zero. I swear the primary arms micro I have likes to randomly jump between 1/2 MOA, 1 MOA and 2 MOA adjustments per click at random.
>>30286389
Zero, none, goose eggs
>>30286412
>Needs more goat-boy
Nnnyeeesss?
How are Bear Creek Arsenal AR's? Classic's offer is tempting. I'm not looking for an insanely accurate gun or one that has a perfect fit and finish, just a solid rifle that won't fail.
Are there other AR's in the $500 range that you lovely people could recommend?
some lol/rage fuel for you guys.....
apparently we know a dirty little secret?
>>30283628
Hey AR dudes, I've been wanting to get an AR with a vintage appearance, like an early CAR-15 or an A1 style rifle.
Any idea where I can get that?
>>30286469
link http://thoughtcatalog.com/daniel-hayes/2016/06/i-am-an-ar-15-owner-and-ive-had-enough/
>>30286480
>>30286469
No one cares?
>>30286468
iirc bear creek used to be moors machine. They changed names cause they sucked ass
So this is what I've decided on. Does everything look alright?
>>30286493
relax breh, i'm just sharing. i haven't read the whole thing yet
>>30283720
This annoys me.
This person clearly enjoys nice things and spent a lot of money, but skimped on arguably the most important part of a precision rifle.
>>30286526
You need AT LEAST 20 magazines
>>30286526
you can buy lancers for like a $1.50 more
taclink might have them still
>>30286540
I am relaxed, I'm letting you know no one cares. Opinions are like assholes. Thanks for sharing.
![1c5a8274acd4a90d1ae072b7795c17a8[1].jpg](https://i.imgur.com/DESeJ4g.jpg "1c5a8274acd4a90d1ae072b7795c17a8[1].jpg")
unironically want to do a completely earth tone ar build but am having trouble finding parts that don't refinishing
what do?
>>30286436
MRO confirmed as god tier
>>30286569
spraycan
>>30286511
Do you have any recommendations?
>>30286526
Yep.
>>30286469
Kys
>>30286569
you could kys
>>30286583
If you don't mind putting together the lower a PSA rifle kit is hard to beat.
>>30286589
a tad bit rude friendo :(
>>30286370
Primary arms has the exact same BA barrel from BAs website for $130 instead of $165
Along with numerous other parts from other manufacturers that were to be included in my build for cheaper than I would pay on the manufacturers website.
>>30286526
Save your money and get a drop in quad rail handguard. The Magpul handguard blows, I hated it and it's ugly as hell. I switched back to the stock M4 handguard before getting a Midwest Industries Gen 2 drop in carbine length quad. Much more space for accessories, and much nicer. As a matter of fact I don't use any Magpul stuff anymore aside from their mags. Went back to the milspec pistol grip from an MOE grip and will be snagging a BCM gunfighter one instead.
>>30286602
i ain't your friend fagarino
>>30286616
This guy is retarded, quad rails suck dick and the magpul has mlok.
>hurr I like holding heavy, bulky cheese graters so everyone should
The magpul is sleek, light, comfortable and has modern attachment points, anon is stuck in the 90s.
>>30286587
Fucking hideous
>>30286601
Alrighty. I need to research Cali laws on buying lowers. Especially because I am not 21 and I think a lower by itself is classified as a handgun or something along those lines.
>>30286569
The only answer is refinishing. Aerove is pretty durable for rattle can stuff if you don't want a professional solution.
>>30286642
Its "other". Private sale, gift from family, or 80% are your options.
>>30286638
>t. poverty
>>30286662
>California
>private sale
>>30286636
What is this?!?!?! *do front flip while unsheathing my twin no-dachi katanas Demonbane and Death Reaper* You want fagarino?! I'll give you fagarino!!!!!!!!!!!!!! *bring down Demonbane on gaijin's head and begin slicing* TAKE THIIIIIIIIS!!!! *do a cartwheel and stab the baka with Death Reaper* AND THIIIIIIIIIIS!!!! *do a backflip while slicing all over. body falls apart* heh, thanks, I needed to test this sharpness for a while now. nothing personel, kid. B^)
>>30286667
I like 15 inch free floats myself, quad rail tards have no room to speak
>hurr I paid more for my piece of garbage than the perfect entry level handguard
>lel poor
>not wasting money on retarded opinions
Hey guys, I have a quick question:
To explain a bit, Canada ALWAYS grandfathers guns that get banned. Every time in history, so some lucky faggots from the 80s still even have full-autos and full auto licenses up here.
We had a petition backed by a representative which, due to INCREDIBLY poor timing, went before parliament yesterday to de-restrict the AR15.
This seems to have had the opposite intended effect, the proposition getting immediately slapped down, and reminding libtards that we are still allowed to own these SCURRY KILLIN MUSHEENS.
So because I foresee a total AR ban on the horizon, I want to buy an AR while I still can, so that if a ban DOES occur, I will have a license that allows prohibited firearms.
Logically this would mean buying the cheapest possible stripped lower, but JUST IN CASE the ban only allows me to keep what I already have...
Tldr: What is the highest quality, objectively best lower available on the market. As in, if you could only have one lower ever, what would it be?
>>30286672
ok kys
>>30286469
>>30286480
>But there’s one thing that would put a dent in the number of mass shootings today and that’s restricting magazine sizes for the AR-15 and other semiautomatic rifles to 10 rounds. No more. Ten.
>>30286662
I turn 21 in September, think that's too long to wait? I hate to have to buy one out of fear, but based off the current laws coming down the pipe, idk what to think.
>>30286700
no thanks poopyboy
>>30285531
If you typically have the stock extended that far you might consider sliding the cheek piece back to match your face. It'll limit how short you can collapse the stock, but it'll give you a better cheek weld when extended. I ended up getting rid of my UBR because of that gap.
>>30286638
>Heavy
You sound like a giant vagina
>Bulky
Barely larger around than the MOE grip with infinitely more options for accessories without having to buy rail sections.
>Modern attachment points
Sure buddy, I hope Magpul is paying you to shill this hard, then again it's be a bad investment on their part.
I had my entire rifle decked out in that shit and I will never go back. Mags are great and stocks are OK...you can keep that ugly shitty handguard, bud.
>>30286694
Literally any metal lower that's in-spec, and that's most of them. The only thing that matters would be the guts, and specifically the trigger if that's something you are concerned with.
It would be smarter to buy multiple of the cheapest metal lowers you can get instead of one overpriced lower with a fancy roll mark.
>>30286712
Wait. Nothing will happen by September, if anything it will just be expensive. I'd buy a PSA rifle kit on the 4th sales just so you have that.
>>30286713
Ok
>>30286700
you should take your own advice
>>30286549
are you implying the scope?
i thought the most important part is the barrel?
>>30286366
>possessing this level of reading comprehension
Homeschooled much?
>>30286526
Basic, but 100% okay.
>>30286741
pb is ok
>>30286587
>Kys
i didn't write the article you tard
>>30286730
>You sound like a giant vagina
not an argument
>Barely larger around than the MOE grip
Quite a bit larger
>with infinitely more options for accessories
No
>without having to buy rail sections
Considering the money you save not buying rail section you don't need(quad rail) that is not an issue.
And then you spew retarded opinions again because you can't actually justify your retardation
>>30286741
>>30286757
this. qb listen to yourself
>>30286739
Fuck I didn't even think of that.
Holy tits.
Thanks, ARG.
And if my plan was to buy one with the most rigorous QC available, and like, 9 of the cheapest metal ones?
Any manufacturers stand out as the tits amongst the rest?
>>30286741
>>30286700
I think you should both drink poisoned kool aid cult style. As a matter of fact, anyone reading this should kys.
>>30286740
Gotcha. Hopefully they have them in stock by then! Thank you very much.
>>30286607
just buy it, your rifle is garbage anyway :^)
also obligatory kys
>>30286755
>Homeschooled
do you think public school is better?
>>30286773
other me is a dick
>>30286723
sweet 9mm
nice collection as well
>>30286784
t. Ptac build owner
>>30286616
>hate magpul
>stops using everything magpul
>continues to use pmags
their stocks are not bad, if i was going to eschew everything they make except for one item, it definitely wouldn't be the mags.
>>30286777
back to your vr world senpai
>>30286779
np
>>30286773
the other me is a dick
So I bought a FDE magpul buttstock to go with my AeroPrecision. FDE build. Well the tans aren't matching up too well and it's noticeable. I bought the buttstock off of brownells website and I don't want to pay to mail it back for a return.
My plan is to go to Academy and buy a black one and then put my tan one in the box and return it.
Do you think I can get away with it? Or does anyone have any other suggestions.
>>30286801
i just said that
>>30286776
what do you expect to get out of the "most rigorous QC available" lower ?
>>30286790
>do you think public school is better?
Objectively yes, public school was filled with pussy and friends.
>>30286777
you should kys for tripping out
>>30286800
kys
REMINDER
qb##7nathang7
>>30286549
You've heard of GA Precision right?
Guess what scope they use to test their rifles.
>>30286809
i just said that too
>>30286755
The average college freshman from the American public schools can only read at a 7th grade level.
>>30286825
kys
>>30286694
ignore this moron
>>30286739
machining more than "push a button and walk away"
if you want high quality i can only personally vouch for mega arms. their fitment is perfect. their machine shop is VERY precision oriented. i'm sure there are others out there however.
>>30286823
>tripping out
Is that a kms for not using a trip?
>>30286769
I wasnt arguing, I was pointing out the facts. You thinking the rail is heavy indicates that you're a vagina, negating your opinion (which it is) that Magpul is desirable over a quality quad rail.
While we're at it, show us how the MOE has more, or better attachment options than a quad.
>No
Also not an argument.
See how it goes both ways?
>>30286814
>perpetuating this myth
well except there was this one kid i met at a luxury hotel from texas that checked every single box for how people think homeschooled children are.
he was wearing crocs with a suit and tie for fucks sake
