Nevah ben dun befo
Images are sometimes not shown due to bandwidth/network limitations. Refreshing the page usually helps.
You are currently reading a thread in /k/ - Weapons
You are currently reading a thread in /k/ - Weapons
Lets come up with cool shit no one has made yet.
>Submachine Gun in .50 AE
>Glock in 5.7mm
>A decent Bullpup .308 Battle Rifle
>>30098355
>quality threads made by anon
japs with asses
>>30098364
>quality posts made by tripfag #2639
>>30098408
Anon if I wanted my own comeback I'd have wiped it off op's moms chin.
>>30098415
cringe
>>30098385
>tfw no jdm gf
>>30098415
Not only a trip-tard, but under-aged too!
>>30098355
>KRISS Vector in 7.62x25 Tok
>A 7.62x54r 3 (or 4) round revolver
>Double barrel side-by-side chambered in .50 bmg
>>30098415
>try hard mexicunt
wew lad
>>30101238
I second that side-by-side .50"bmg!
Also, why not VZ.61 in 7,62x25 Tokarev? That would be loads of fun. And a sore face, probably!
On topic
>underslung flamethrower, for all your burn the heretic needs
>Shotgun pistol with magazine inside the handle, maybe for Aguila mini shells, but not shit and heavy as MAG-7?
>>30101470
>>30101238
>I've never fired 50bmg: the posts
>>30101470
I'm sitting here wondering what the minimum breach diameter is for .50 BMG, I don't think i want to look it up.
>>30098355
Uhhhh...
>>30101470
Underslung flame thrower has been done before by the Finns at the end of WWII.
>>30101883
Oh! Had no idea! Thanks, kind anon. Have any more info?
>>30101901
It was more to disguise the flame thrower man and make him less of a target.
https://www.forgottenweapons.com/suomi-m31-and-underbarrel-flamethrower/
Submachinegun in 9x20 Browning Long
>>30098355
>submachine gun in .50AE
A BOLTER
A 3 shot revolver in .300 Winmag
>>30101963
Thx, man.
>>30102259
Nah, would have to be at least rocket assisted. Also, larger diameter. Fluff used to go like .75" for normal and 1" for heavy bolters.
Light tank with twin linked Gau8s, smoke launchers, thermals, top speed of atleast 80mph, put some AA rockets on it to be safe. Needs top notch turret traversal speed and angles
Should allow it to brrrrrt while tracking targets as it does circles around everything. Though it's armor wouldn't stop anything higher than crew served machine guns
A 22lr miniature revolver cannon.
A lightweight, self powered, variable speed rotary gun.
>>30102184
>Not 9x23
>>30102341
I'm sure one could handload rocket projectiles into .50 AE cases.
>>30098355
A Mateba Model 6 chambered in .500 S&W
>>30101844
>Kel Tec
>high quality
Pick one, and try not to gouge your hand on the wood screws.
>>30102184
>bolo Mauser C96
Ben dun befo'
>>30102524
also ben dun befo'
>>30102411
Lemme guess, you also want it to be depolyable by heavy gliders launched by a recommissioned and upgraded Iowa-class battleship, right?
>>30104504
I rubbed my dick on one.
Nothing happened except I'm now aroused.
>>30098415
Build wall
>>30101844
>leltek
Okay anon
>>30098355
>A decent Bullpup .308 Battle Rifle
MDR
>>30104504
>>30104790
>I don't know what I'm talking about:The posts
Ok pal.
>>30104810
Available Nevuary 33rd, 2525.
>>30102423
The key to thwaw threads it's checking to see If your submission exists before posting.
>>30104440
Sure you could. But do you have to ability to attach the rocked motor to the projectile with enough qc to maintain any semblance of accurate
Tfw there is no 44 mag or 38 submachine gun.
>Tfw there is no modern des lisle carbine
>tfw there is no 44 mag broom handle
>>30098385
Do you have anymore pics?
>>30105667
There's no point, because 10mm is a much better round for autoloaders and can be loaded similarly to .357 mag.
>>30105667
>>30106483
>Not wanting superior 460 Rowland
Enjoy not stopping the 30 polar bears that are charging at you with your 10mm baby gun
>>30098355
>decent bullpup .308 battle rifle
Kel-tec RFB and if they ever finish it, RDB.
Desert Tech MDR
M14-clone in the Rogue Chassis bullpup kit
Unless you mean something more specific and special snowflake.
Hm....I would say AR in .30-06 but that already exists.....
A handgun with the customization potential of the AR. I think glock comes close but they just miss the mark.
I will want my god damn 50a.e. carry gun. Shit I'm almost willing to take something like a 3 shot 500sw revolver.
Also bring back 25acp. It's funny to me Andi want a pocket gun in it that's somewhat relevant and easy to feed.
I want a decently priced (under 5k), decently sized (under 30 lbs?) minigun capable of being hip fired by one guy. 556 would be a good caliber for it I think.
>>30108451
So fucking buy one
And wtf do you mean relevant and easy to feed? Those already exist as .380s and .32s unless this plan involves making something the size of a g43 but double stack .25 that magically drops the price below 30cpr
Otherwise buy a Phoenix HP25 and be done
>>30098355
>7.62x25 Glock
My dick would be rock solid.
>>30101238
Well now I'm aroused by the thought of a 7.62 by 25 vector so long as its full retard.
>>30108599
My plan is almost exactly what you said. Doesn't have to be polymer like a glock, was thinking a double stack metal frame. Just a useless little brick for fun really.
>>30102280
I'll break your wrists for free
A liquid cooled, DI .577 sniper rifle with a 12.5 barrel and 5" folding report altering device with 8 directional free floating rail system, wire frame mutli-directional adjusting cheek resting system and pistol grip. Built in bi-pod + monopod combo and an integral scope too.
And paint it gray.
>>30098355
>affordable 9mm bullpup that's not a fugly tactibubba hackjob
LASER GRENADE
>>30108599
i would buy the shit out of a .25acp & 7.62tok glock.
>>30098415
and this is what you would come to expect from a trip
>High velocity, spitzer round, 7.62x25 Tokarev in a PDW like a P90 or MP7
>.460 Rowland or .454 Casull 1911
>.50 AE, .454 Casull, .460 Rowland, .500 SWM, or .500 Nitro Express M1 Carbine
>>30104766
dubs of truth
>>30108797
Second ones already a thing
>>30108797
>.50 AE, .454 Casull, .460 Rowland, .500 SWM, or .500 Nitro Express M1 Carbine
fuckin thing would beat itself to death
>>30098355
>Scout optics that don't suck
>Holo sites that don't lose zero with temperature changes and can change the dot color to aid the colorblind
>lever action or semi auto 10mm carbine
>drop block single shot breech loading rocket launcher (fuddbolter/40k crossbow)
>AR pattern shotgun to compete with the Saiga and VEPR
>taser that uses a slow sublimating pellet to create an ion trail instead of a solid wire: lightning gun
>>30108843
no it ain't, nigga
>>30098355
AR10 chambered in 8mm Mauser.
>bullpup semiauto
>26" OAL with looong barrel to meet req
>quick change barrel system for SBR lengths
>fully ambidextrous
>downward ejecting
>chambered in 10mm
>>30108927
>>drop block single shot breech loading rocket launcher (fuddbolter/40k crossbow)
Gyrojet comeback
>>30108950
There's actually .460 Rowland conversion kits for the M1911, not so sure about the .455 Casull
>>30098415
Stop.
Christ.
>>30098355
I like the p90's mag design, and want to see it adapted to larger calibers. As far as likelihood is concerned i could see .223 happening, but I like the idea of one in 10mm.
I'm glad to see that so many other people wish there were guns besides the desert eagle and a revolver or two in .50 ae
it's a nice cartridge, and while it's nice in an auto pistol, it'd be cool to see it in a long gun too
>>30108927
>Semi auto 10mm carbine
1:glock carbine kits
2: vectors in 10 coming soon
3:some fucker probably makes some bit for an AR.
>>30109000
>vectors
Yeah I can't wait for that 5" barrel.
A straight-pull bolt action rifle chambered in a modern cartridge that takes AICS magazines and doesn't cost over $2k.
Double stack mag fed 20 gauge toggle locked sideways ejecting/feeding folding stock integrally supressed stamped construction shotgun
>>30108403
>RFB isn't good, RDB won't even be offered in anything other than 5.56
>MDR will never come to market, they're already 3 fucking years behind schedule
>M14's aren't good and any aftermarket chassis system is literally shit
>>30108451
>bring back .25acp
It never left? There are seriously like 2 dozen pocket pistols that are still in production chambered in it. Hell Beretta alone makes 4 of them.
>b-but it's an absurdly expensive round for what its made from!
So are all other niche calibers and gauges. Deal with it.
>>30108797
>>30108881
The
>why can't I pull the charging handle against the gorillion-pound recoil spring?
rifle.
>>30109006
I thought they had (or will) a 16" model?>>30109006
>>30108972
>not sure about the Casull
Yes, because having a 3" long rimmed round in an autoloading pistol fed through the grip is totally possible.
>b-but muh coonan!
.357mag is almost an inch shorter than .454cas and that fucker's already ridiculously wide.
>>30109085
They will. They have basically zero LE sales and absolutely zero .mil sales so a civilian-legal, non-NFA item will be their first and probably only production of it.
>>30109051
>RFB isn't good
Or, ya know, no. It's pretty damn good.
>>30109092
well, time to make a .454 auto cartridge!
>>30109110
It's literally the worst semi-auto .308 ever made.
So, no.
>unreliable
>inaccurate
>gorillion-pound, gritty, creepy trigger with a mile of takeup
>crack-prone frame
>nut heads that wallow out the soft cheap plastic surrounding them
>ruins brass almost as bad as a G3/HK91
>>30109122
You mean .460 Rowland?
Ben dun befo'
>>30109134
Have you ever even seen, let alone held one? Literally nothing you said is even remotely correct.
>>30098355
.327 Fed Mag lever-action rifle, pref. from the Winchester 1892 pattern.
>insane muzzle velocity, very little recoil
>capable of firing 5 different calibers (.327Fed, .32H&R, .32 S&W Long, .32 S&W Short, .32acp)
>>30109173
Fuck that, a .460 S&W Mag lever action and actually be able to use calibers still in production.
>>30109168
Yep. Local range has one for rental when it isn't fucking broken.
I will say this, lelkek has a good warranty and CS. Because the thing is *always* broken.
>at best a 2.5MOA rifle, literally worse than most FALs, HK91s, and M14's
>literally an 11 pound trigger
>will jam at least once a mag with good ammo, absolutely refuses to cycle steel-cased
>completely crushes the case mouth as they get turned slightly sideways in the ejection chute (also causing jams as brass gets wedged and piles up)
>frame has cracked literally every time it has been dropped
>the one time the frame went long enough without being dropped, the nut heads in the grip torqued through the plastic and spun freely
If nothing else, it would be very nice to have a rifle that doesn't break 100% of the time it's dropped from waist level onto linoleum.
>>30109190
>implying everything but .32 S&W Short aren't still in widespread production
Also, Big Horn Armory makes leverguns in .460mag and .500mag. My dad has one of the .500mag ones and it's not very pleasant to shoot.
Glock in 9x18
anything in 7.62 tok, that is a modern double stack semi auto pistol, and available in the united states.
>>30109059
I guess it's more common for other people. I rarely see it I. Stock where I am and can't be assed to try finding it online, though I really should. Any of those current production ones worth Shit? Not bothered by price per round really.
>>30109231
For what purpose?
Surplus makfood or tokfood is now more expensive than 9x19 new production, on top of being corrosive.
I could kinda-sorta see the appeal of a 7.62Tok chambered modern autoloader, but why 9x18? It does literally everything worse than 9x19 while having basically the same recoil, and is fatter than 9x17 while only being ~3% hotter so it's still a bad choice for pocket guns.
>>30109248
The Beretta's are pretty good. The SCCY one is okay. Most are SNS-tier (Jennings, Phoenix, Bryco, Lorcin, Raven). The lelkek one is...barely adequate. I think Walther still makes one but I don't think it ever made it stateside. Astra is *still* making a good copy of the Browning 1908. Taurus makes one, no idea on quality but >taurus. Colt just started making one again.
ACOG with a mil-dot reticle
S&W X-Frames in .22LR and .44 Mag
>>30109248
Literally every walmart, Big 5, Academy, Gander, Cabela's, Bass Pro, Dick's, Sports Authority, Hibbett, and every other sporting goods store (and at least one gas station) in my area carries FMJ .25acp, and about half of them carry some form of defensive load.
>>30109207
Try 1.5 MOA and a 6~lbs trigger that doesn't damage brass at all. In the 9000 rounds I've shot through mine, and in all other reviews of said rifle, none of what you said is true.
>>30109299
>S&W X-Frames in .22LR
this right now
>>30109313
I seriously doubt my local range has been getting lemon after lemon after lemon from them.
I mean, I know rental guns get the piss beat out of them but their RFB seriously breaks more than all their other rentals combined.
this reminds me of a conversation i had with my grandfather
>"you know, they should really make over under shotguns with one 12 gauge barrel and the other a .410"
>why do you want that?
>"well 12 gauge for useful shooting, and .410 'cause that's what my brother was killed with"
>>30109351
what
>>30109253
because it is relatively panic proof, since they are not mainstream calibers.
plus I have 1400 rounds of steel core bulgarian tokarev surplus. I would love a modern full size pistol. so I have my little body armor defeater.
>>30109351
They make those though.
>>30109378
someone makes those? i've looked and i couldn't find any.
>>30098355
>a reasonably priced and mass-produced 9x19mm bolt-action rifle with iron sights
>any new production and cheap centerfire bolt action with iron sights, for that matter
>lever-action 9mm rifle
>revolver rifle that shoots .22LR or .22 Mag
>>30109390
I've seen a few, but I'm pretty sure they're all either ridiculously expensive one offs or bubba jobs. One guy on reddit had this weird piece of shit made: https://www.reddit.com/r/guns/comments/3qkc97/is_it_and_sbr_is_it_an_sbs_no_its_an_aow/
>>30109431
he specifically wants an over under, not a side by side.
>>30109411
>Rock Island's .22TCM boltgun
>under $300, takes their doublestack .22tcm 1911 mags
Could be fairly easily converted to 9mm as well. Frame's the right size, bolthead might not need any modification, would take already-existing 9mm (doublestack) 1911 mags.
>>30109451
It's a proof of concept.
>>30109431
>>30109451
>>30109455
he also doesnt mind ridiculously expensive, so if you know of any, let me know.
>>30109289
Awesome I'll have to check those out, thanks.
>>30109309
It's probably at cabelas near me, but they tend to move things around in the ammo section.
>>30098415
this shit is as original as a black man involved with BLM.
>>30098385
wheres the bulge?????
>>30104522
Underrated post
>>30098385
How is it fat but bony as fuck at the same time?
No wonder they have negative population growth.
>>30101844
He said decent.
>>30109026
Couldn't you just get an AR without a gas hole drilled in the barrel? Then it would be a straight pull mag fed single action in basically any caliber.
I'd like to see an SKS chambered into some other calibers.
>5.56
>5.45
>7.62x54
>.308
>>30110746
Oh, an SKS in moar calibers! I want that! I think it would be fuckin' neato in 7,62x51
Also on topic. WHERE'S MY FUCKIN' PLASMA GUNS?!
Pic also related
>>30109190
Is .327 Fed Mag no longer in production? Because I'm pretty sure it is.
A subgun in african eliminator sounds less than pleasant to shoot.
A full-sized Glock in .225 JAWS MicroMag.
I really, really want a 10ga Saiga or Mossberg 590A1.
The closest I've gotten to this dream is a 26" barreled Ithaca Mag 10. My other 10ga guns have 30" barrels.
A powered exoskeleton that lasts more than an hour and has actual armor on it.
>inb4 ironman
>>30111036
Mah nigga!
Btw recently my tech geek friend made a few articles about the problem. Thing is that we most likely won't have shit like Fallout or Warhammer power armours, but instead more like S.T.A.L.K.E.R. take on powered armour. Just dress up in the heaviest conventional defense and slap a exoskeleton on top to help you carry it, but still wouldn't be crippling if the battery ran out or some vital shit for the suit got fucked. (Fuckin' monolith btw... grumble grumble)
The issue of power is the only thing that keeps it from going to war proper. Some versions can run for about 3-6hrs on their own, but that's not including the armour part. There have been thoughts of equiping a single guy from a squad/fireteam/wotever it is called nowadays with PA and let him storm inside doorways or other dangerous stuff, while others can be equipped in today's fashion, maybe with exception of carrying spare batteries for the power armour. That, and there have also been some mentions of maybe making a "heavy weapons guy" outta the power-armoured dude - think mk.19 AGL
>>30110972
Curious as to why you want the 10ga so bad? I only shot 12ga and that shit gave me dakka-boner. What makes 10ga special in your book? Of course, bigger is better, but you know...
>>30109411
Tikka T3/T3x Battue comes with irons and chambered in a bunch of rounds.
>>30110953
the most abstract sounding cartridge I've ever heard
>>30098355
I have a better idea that hasn't been done before.
Weaponized ants..
>>30098385
Why is she covered in shit?
a mass-produced straight pull bolt rifle of any kind, preferably in something like 7.62 x54R
>>30112708
>preferably in .30-06 and/or some other durr calibers
ftfy
>>30113150
but 30-06 or 7.62 x54r aren't meme calibers
like, at all
>>30108927
>fuddbolter
FUND IT
>>30101612
>What is padding?
>What is custom recoil buffer?
>What is basic designs of the "neva been dun befo" double barrel?
You are retarded if you thought I was saying just slap 2 .50 bmg barrels on a regular 12gauge style stock like pic related. I'm not stupid nor am I a sadist / masochist.
>>30098415
I wonder how many people filtered you just now.
>>30104766
REMOVE TACO remove taco
you are worst mexican. you are the mexican idiot are the mexican smell. return to mexico. to our mexican cousins you may come our contry. you may live in the zoo….ahahahaha..mexican genocide best day of my life. take a bath of dead mexican...REMOVE TACO FROM PREMESIS
>>30109231
Norinco made a SIG clone in 7.62. Only available to canucks though.
>>30109026
>>30112708
Straight pull actions arent strong enough for modern cartridges
>>30109369
>because it is relatively panic proof, since they are not mainstream calibers.
But making a glock in 9x18 would result in it becoming mainstream
>>30110746
>I'd like to see an SKS chambered into some other calibers.
So you want a short stroke piston in .308? go buy an FAL
How about a rifle/shotgun design that shoots axes
Modern revolver rifle in a decent hunting caliber
>>30113346
>revolver rifle
Cylinder gap sucks massive wind for killing power. There's a reason even revolver rounds become lever action carbines instead of revolver rifles in long gun form.
ROLLER MINES
MANHACKS
SEMI AUTO BULLPUP WITH ELECTRONIC FCG EASILY PROGRAMMABLE FOR FUN-AUTO AND WITH ELECTRONIC IGNITION
USES SPECIALTY CASELESS 6.8MM ROUNDS AND HAS AN UNDERBARREL 39.99mm "FLARE" LAUNCHER
TAKES RECHARGEABLE POWER SUPPLY THAT ARE KEPT IN EASILY INSERTED BATTERYPACKS
>>30113435
Yeah is there a grenade launcher that you can put on a Tavor?
>>30113307
THICC
Name? Sauce?
>>30109207
Comparing any rental gun to a personal firearm.
>>30113312
will they explode? BECAUSE THAT WOULD BE F*CKING AWESOME!
>>30113211
without muzzle brakes, I believe it might break an ordinary wooden stock
I've never fired a .50 BMG rifle myself, but I've read that with muzzle brakes and fired out of a 30 lbs rifle, the recoil is likened to being a bit higher than a 12 gauge slug
can you imagine what the recoil would be like without any sort of compensation, coming out of a 6-12 lb gun?
>>30113286
>Straight pull actions arent strong enough for modern cartridges
Yeah, that's what I was afraid of.
>>30098355
I'd like to see more fully ambidextrous combat rifles. I think true ambi is the best option.
>top/bottom/forward ejection
>charging handle on top or both left/right (not right or left that you can reverse in a field strip)
>All controls mirrored on both sides
>>30113447
Gineva or ginivia, something like that. Some camslut.
>>30113651
The best option is to shoot right handed.
>>30114074
what if you're left-eyed
>>30114347
then you just die
>>30110527
Why are these taking so fucking long
>>30114863
Because they've been tweaking the design over and over again based on operator feedback so it's become a bit of a Duke Nukem Forever situation. That said, they're available for preorder now, so they should be out soon (for realzies this time).
>>30116393
Any day now I'm sure. No company would just take tens of thousands of dollars for a vapor ware project and then not make it, especially when they have no real fear of reprocussions.
>>30116413
Are there any semi-vaporware shotguns out there? I just had a great idea for a novelty 3-gun loadout.
>DT MDR
>Bren Ten
>???
>>30108742
Technically, mag in grip configurations are bullpup.
Plus there's 9mm AUG.
>>30108927
>semi auto 10mm carbine
There isn't an AR15 kit for that?
>>30101238
Reverse trap robot chick is amazing.
>>30098355
>Decent Bullpup .308 battle rifle
Kel-Tec RFB
>>30109231
>straight pulls can't handle full power rifle rounds
Schmidt and Ruben disagree
Pistol caliber carbine in 10mm Auto. Seriously, what the fuck gun makers?
Get on this shit.
>>30119520
Vector is coming in 10mm IIRC.
>>30113286
>Straight pull actions arent strong enough for modern cartridges
Bullshit.
>>30119611
About damn time.
>>30120567
I'm waiting for them too
>revolver that uses 12g shells
>>30120941
>Effective range six yards
Might as well use a spear at that point.
>>30113307
Jesus Fuck
>>30098355
non pistol grip (for compactness) big bore semiauto SBR.
>>30116612
Pancor Jackhammer, duh.
You'd have to have more money than god to get them back from hollywood though.
>>30121338
>Jackhammer
There is literally one in existance m8, and reloading the thing involves taking out a hex head screw because it's an early prototype.
>>30098355
Pure sodium bullets. The bullet itself will be surrounded by a dissolveable coating that melts when wet. Pure sodium hits water in body. Chemistry does the rest.
>>30098355
An m1 carbine chambered in .357
>>30119520
https://www.youtube.com/watch?v=wfVPEQfmHEA
>>30108985
Straight wall cartridges only tho
>>30109351
>>30109378
I don't know about different gauges, but I know O/Us with a 12 gauge and some rifle cartridge like .223 are a thing.
>>30101612
>only a few mags
>>30113516
Yes. I've fired the .50 bmg AR-15 upper, it was fun until seconds later when the after-adrenaline pain hit. Left a mean bruise and a 3" tear on my shoulder but then again it didn't have a muzzle break or any substantial padding of any sort. But yeah a double barrel .50 with a good shock-absorbing butt-stock could be easily bearable.
>>30117798
Yup. The best.
>>30123371
>that chick lean
>>30110518
could be implants, that form the skin creases that make it look bony.
>>30109134
>G3 ruins brass
I've never understood this meme.
I've had one casing malformed by my ptr and i've put a lot through it.
Is it the scoring?
I genuinely don't understand.
>>30128600
like most memes on /k/, i'm sure it's simply one user's bad experience that was snowballed by a combination of inaccurate retelling and people talking out of their ass.
>>30128600
You got lucky. HK didn't design the G3 with reloaders in mind.
A scaled-down M249 in .22LR
>>30110972
So buy a 10 gauge BPS and a Briley mag extension on it. These threads are always full of shit that either already exists or is easily made but nobody knows how Google works
>>30113389
>Cylinder gap sucks massive wind for killing power
Luckily for you talking out of your ass isn't a punishable offense because you are painfully wrong. The fact that you chose the words "killing power" is worth an eye roll all on it's own
>>30119520
>P90 chambered in 10mm with a Super V recoil system in the back
fund it.
>>30113507
>MONKEY MODEL RFB!
>>30113286
>Straight pull actions arent strong enough for modern cartridges
The 8x56r is a fucking monstrous cartridge, I'm sure an M95's action could handle .308 and more.
>>30113286
>Straight pull actions arent strong enough for modern cartridges
that is a load of fucking horse shit
There's the Blaser R-93 and the Browning Acera both chambered in magnum cartridges
>>30098355
A laser shotgun with an adjustable beam dispersal pattern.
>>30098355
>AK in .47-70 govt
some one make it pls
>>30098355
>DI Galil
>Lightweight OG style Galils that doesn't look like shit and overpriced (I'm looking at you, IWI)
>Lever delayed blowback rifles that don't fuck up when the ammunition weight or proppelant type is changed
>>30131399
For what purpose?
Half the point of the Super V is to put the bore axis in line with the hand. Any inertial compensation in muzzle climb would require the recoil system to be on the same side of the fulcrum (i.e. your hand) as the barrel, on the other side you'd make it worse.
You've basically invented just a rear heavy, unbalanced P90 in 10mm.
>>30110919
The guns were a bit of a flash in the pan. Great round doomed by fuddlore surrounding .32cal pistols.
>ME of decently hot .357mag from a 5" barrel
>from a 2-3" snubby
>with less recoil than .38spl standard pressure
>also you can get 6 rounds in a frame/cylinder that can normally only hold 5 .38spl (J-frame, LCR, etc) or 7 in a full-frame revolver (SP101, K-frame, Vaquero, Single Six, N-frame, etc)
The Hornady 100gr XTP load is actually really *really* good. ~14" of penetration and an expanded diameter of almost .550" from a 3" barrel. Through the longer-barreled Single Seven or through something like an Encore/Contender it's a fully serviceable deer round.
However, the ammo stayed in production and Ruger started making the Single Seven in it 2 years ago and the LCRx about 8 months ago.
>>30112708
I know it's rimfire but the Browning T-Bolt is a straight-pull.
>>30131465
It's big. It's also very low pressure and still pretty tame on recoil (less than .308).
>>30098364
>tripfags insulting non attention whore brethren
>>30116641
Sure is. As well as 9x25 Dillon, .45acp/super/.460Rowland, .357sig, 7.62x25, .30carb, and basically any other caliber that could conceivably fit in the magwell of the rifle.
>>30128600
Between the fluted chamber fucking up the neck and case mouth, and the extremely violent ejection putting a hellacious dent in the case wall (like >>30128821, that's actually pretty archetypical) the brass is usually unsafe to reload.
Mid to low high end Single shot break actions in a plethora of caliber options.
>tfw I want a purdy 45-70 or 500sw or 300 winmag break action under 2k
>>30134432
You want a Thompson Center Contender with more caliber options?
>>30121405
Enjoy your 25 grain projectiles
>>30121405
this actually works
the reaction is so instantaneous that when it starts tearing apart in gelatin it makes a huge cavity
you have to have a coating on it because sodium becomes an inert over layer exposed to air for too long.
ill try to find the video i watched where some nerds did exactly this
>>30114074
The best option is to be fully capable with either side. I'm not even a subhuman lefty, and I like shooting both ways.
>>30135119
You swing both ways, eh?
>>30121378
>Get prototype
>Scan into 3D software
>Resell prototype (profit pt.1)
>Use 3D printing to rapidly finish protyping (fix reloading/other issues)
>Machine fixed design out of real materials
>test
>die in explosion or have a working jackhammer, depending on how good of a machinist you are
>?????
>profit, part 2
>>30109411
sawta been dun befo
>>30109411
Features:
Calibre – .22LR
Model – Alfa Carbine
Mag Capacity – 9 Shot
Finish – Blued
Action – Carbine Revolver
Sights – Adjustable Front & Rear Sights
Stock – Timber
Barrel Length – 16.5"
>>30135695
>Gross oversimplifications: The post
>>30136506
>Stating the obvious: The post
>>30134432
>what is the Thompson/Center Encore
>what is the Thompson/Center Contender
>what is the Thompson/Center Contender G2
G2 and Encore have factory chamberings for everything up to .458 Lott and .500S&W, including 12ga. Contender up to .45-70 and .500S&W.
>>30136878
If 3D scanning was as capable as people here seem to think, then reverse engineering would be a hell of a lot easier.
First, you don't end up with a 3D model. You end up with a point cloud you need to then turn into a 3D model, which will still be horribly inaccurate by not have the actual nominal value for the dimensions or giving you the engineering fit required.
The massive investment in making the 3D model and shop drawings alone would be prohibitive.
>>30134975
Fund this.
>>30121405
>>30134975
>>30136948
https://www.youtube.com/watch?v=T85d7ST2yxU
