Trigger malfunction
Images are sometimes not shown due to bandwidth/network limitations. Refreshing the page usually helps.
You are currently reading a thread in /k/ - Weapons
You are currently reading a thread in /k/ - Weapons
Hey K, went shooting my PSA kit for the first time today, went great except for their standard FCG trigger. I think it was having trouble resetting so I had to push the trigger forward or slap it back to get it to fire. No issues with it firing upon release but it was a shame not to be able to mag dump. Is my anderson lower out of spec?
What is the /k/ solution: 100 dollar jizzel? or 25 cent trigger job?
>kit
>kit
>kit
>kit
top kek
>>29730358
it was an extremely cheap baby's first AR, there is honestly nothing funny about this sir
>>29730348
You may have put the hammer spring in the wrong way. Same thing happend to me
>>29730348
put the FCG springs in the correct way
>>29730438
k thanks
>>29730380
second for that.
there -are- /k/ommandos on budgets.
![WP_20160419_001[1].jpg](https://i.imgur.com/2i723gJ.jpg "WP_20160419_001[1].jpg")
>>29730391
>that pic
Gross.
>>29730380
it's funny as fuck because you're blaming the trigger for not working after you put it together, then accused your lower of being out of spec.
>>29730453
WHAT HAPPEND TO YOU
>>29730458
true, I dont mean to talk shit. obviously it had everything to do with me putting it together
>>29730483
just the bantz m8, its cool. Not many people have a great affinity for tiny parts and springs.
>>29730453
>That furniture
>that magpul stock
>>29730495
I refuse to find an armorer
![WP_20160419_003[1].jpg](https://i.imgur.com/aYSgvxF.jpg "WP_20160419_003[1].jpg")
>>29730531
>>29730474
I-it's not that bad...
....buy a new trigger group?
I mean unless you're hopping on the premium trigger market, it isn't that expensive to buy a replacement mil-spec group.
Unless your lower receiver is a lemon. or you put a spring on wrong.
>>29730551
ARG HAS CORRUPTED YOU
>>29730348
Take it apart and put it back together the right way.
If it still doesn't work after you put it together wrong again, then buy another kit from a different company. They're super cheap. If that one doesn't work either, then you'll know 100% that you just need to watch more youtube vids about putting it together correctly.
>>29730551
>>29730348
polish that shit up OP
chances are you have the wrong spring on the disconnect or something
probably pushing on the trigger too hard possibly
>>29730551
Muh nigga
PSA kits are known to suck
check your spring positions
I would bet if you fucked up the trigger spring, you also put your hammer spring on backwards
If you removed the disconnect would the gun be full auto or would it ride the bolt and not have the inertia to strike the pin adequately?
If it were full auto, would it stop firing when you let off the trigger?
>>29732349
Just curious. If I wanted to do something illegal I'd make a lightning link, which I don't but if there are illegal lightning links out there, that implies that removing the disconnect wouldn't work.
>>29732349
it might fire out of battery because the hammer immediately follows the bolt, so yeah it's terribly unsafe anyhow. the disconnector is still used in full auto operation, the auto sear just disengages the disconnect *after* the bolt is in battery so it operates consistently.
>>29732452
Ah, that makes sense. Thanks
