Why isn't your rifle Cerakoted edition?
Previous thread
>>29479197
>>29479197
>>29479197
>>29485777
>Why isn't your rifle Cerakoted edition
could never decide on color
>>29485777
>didn't use my image
:(
>>29485776
If the wd40 still does nothing by tomorrow I'll go to Walmart and get some PB blaster
>>29485797
are you SURE your hitting the right side
Why would I cerakote when I can spray aervoe all over it like a real operator?
I dislike sending guns away, takes time away that I can shoot them and I've lost packages before.
>>29485816
Yes. Very sure.
You hit the smaller side to drive it out towards the bigger side.
Brb taking pics
>>29485793
If its your very first build then 6.5 is an awful choice. Stick with 5.56 for your first couple builds, especially if youre so unsure of yourself now.
>>29485777
>Why isn't your rifle Cerakoted edition?
Because.
>>29485777
I'm going to paint it soon. It's going to be time consuming though so I'm kind of putting it off.
Because spray paint is cheap, and I get a reason to do a cool new pattern every once in a while.
>>29485851
Did you get lazy half way through rattle canning it?
>>29485852
Reasonable enough
>>29485888
Yeah but I'm not driving to Walmart tonite
>>29485816
Pic related is the side I am punching
>>29485913
Nuke it from orbit, its the only way to be sure.
>>29485913
Pic related is the other side.
The measurements are arbitrary as I wasn't being super precise, but I'm illustrating that it's clear which side of the pin is smaller
>>29485922
Yeah no kidding
>>29485888
>but hurt
Accidentally posted in the last thread, but. Rate my build.
Just put the new generation midwest industries handguard on and gave the old one to my dad who wants to build one now.
It's an Anderson upper and lower mid tier parts in it. More of a rice gun, but it loves eating up my gas rings. Suggestions for those?
You guys think it'd look better with black furniture?
>>29485932
6.7/10
and dont put oil in the lower
>>29485879
No it was the wrong black.
I have flecktarn stencils. Just going to be a pain in the ass not fucking it up.
>>29485932
>More of a rice gun
what?
>but it loves eating up my gas rings
more what? whats going on with the gas rings? how many rounds and gas rings do you have through this rifle?
>>29485777
because spray paint best paint
>>29485944
That's from my hands, I had shot it for quite a bit, making a mess keeping it wet.
Who makes good affordable stripped uppers and lowers?
Planning my next build and I'm not sure what to go with.
My first AR has one of those $40 Anderson lowers but I'm not overly impressed with it and there are some minor issues with it that make me not want a new one.
>>29485941
Yeah I'll probably do the oil on top of hotter and harder. It may not matter but it will temporarily alleviate some of my rage
>>29485954
i think he means like a ricer car
>>29485954
I've gone through 3 sets and 1200 rounds.
>>29485962
>hes going to get angry and just whale on it
Hes about to pull a God_of_Muar!
>>29485959
Aero is decent and affordable.
>GC taking advice from CG because whacking at his gun does nothing
This can only end well.
>>29485970
If it can't be pushed out I'm just gonna grind it because fuck railed gas blocks
>>29485947
Flecktarn is saxy
>>29485984
If you have any suggestions don't fucking hesitate
>>29485989
THATS WHAT IM TALKING ABOUT!
A MAN WITH HUEVOS! HUGE HUEVOS!
>>29485969
that doesnt sound right at all. how do you know you need new gas rings?
>>29486000
I love how America is carrying a little flag of America
>>29485995
Yeah ARG voted. Vietnam tiger was a close runner up. I was surprised how few votes hex got considering everybody uses it.
>>29486009
I love everything about that comic. lol.
>>29486030
Yeah my wife was bugging me to stop. Apparently the sound of frustration is disruptive
>>29486030
Seriously which one of you trips plays CG? He CANNOT be real.
![15a443ea32a50398ce89331b1ca2d263[1].jpg](https://i.imgur.com/DEFhToh.jpg "15a443ea32a50398ce89331b1ca2d263[1].jpg")
>>29486006
The Bolt collapses under the BCG's weight, generally around 400 rounds. Causing jams. Kind of using you guys for a gun diagnosis right now, I'm wanting to try different gas rings. But if it seems like another issue, I'm into it.
The first 200 rounds I shot through it were the Wolf Gold 223s, and then I bought a box of pic related, and now I'm 200 rounds away from finishing the 1000 rounds it came with.
>>29486043
I-I a-am r-real!
>>29486037
My gf does that shit. Anytime I get upset or emotional about anything, she takes it personally.
Its a really really fucking annoying personality trait.
>>29486030
>im smart cause I say so
>im so smart Im gonna brag about it and jack off over my own smartness on the chinese picture place
>god, all these guys think Im so smart. Fuck im so turned on
So, does this help you feel good about the rest of that failure you call a life? You deaf piece of shit.
>>29486043
Oh... hes very real, un fucking fortunately.
We all wish he wasnt real so he would stop showing back up here.
I'm a lazy cheap bastard
>>29486057
You are using utter shitty bcg if gas ring get worn to point of failing stand up test at 400rds.
Really shitty. What brand is it?
Spill it at once!
Oh and answer my question about lower part kit what brand it is?!
>>29486078
That sucks. She wasn't taking it personal, but she could hear me swearing and pounding on the table and she doesn't want me to end up freaking out at her, which I've done before in high stress situations
>>29485999
First thing I'd check would be whether you have it secured in a 100% rigid manner.
I've seen people absolutely demolish shit because they hammered away at it even as it happily flexed.
>>29486086
>Asian market
>>29486078
Geeze somebody's having shitty life or day and is getting jealous of my...
Smugness
My life have took better turn lately and it have already on good side of thing.
Feels good mang.
>>29486113
Great sushi. Go visit there.
>>29486118
Yeah. Im really envious of not looking like a twig and having my hearing totally bums me out man.
>>29486108
I've got it locked in a vice pretty good.
I might go to a buddies house who has better tools and more ar experience to help me.
I do appreciate all the help guys
>>29485979
Alright.
>Aero stripped upper and lower
>CMMG "essentials" LPK
>Magpul K2 grip
>MOE trigger guard
>ALG ACT
>not too sure what stock I want yet
>Aero upper parts kit
>Faxon 14.5" barrel with a faxon GB and gas tube
>AIM gen 2 BCG
>BCM Mod4 charging handle
>Pinned and welded J-Comp
>considering either a KMR Alpha or a Gen 3 Midwest Industries rail
>DD fixed front sight
>KAC micro, Aimpoint PRO, and Surefire M951 off of my A4gery (then put my carry handle back on the A4gery and make it an irons gun)
>>29486133
>dat KAC rail
>dat 10.5" barrel
>dat 30mm red dot optic
>dat fixed rear sight
>dat MS3 sling
We basically made the same rifle. You need to get a can for that stick.
Is there a cerakote service I can send it away to be done?
>>29486230
Yes
http://blowndeadline.net
>>29486225
Im pretty sure we have had this conversation before. Ive been debating buying a 5.56 dedicated can,but until then I may break down and buy another uggo YHM brake.
Plus I enjoy how uncomfortably loud it is. Fuck public ranges and fuck your hearing pro. FEEL MY CONCUSSION!
>>29486078
>My gf does that shit. Anytime I get upset or emotional about anything, she takes it personally.
>Its a really really fucking annoying personality trait.
>>29486104
>That sucks. She wasn't taking it personal, but she could hear me swearing and pounding on the table and she doesn't want me to end up freaking out at her, which I've done before in high stress situations
Both of you.
Not doing this
> be in frustrating heat of moment and swearing
> hear annoy whiny voice of girlfriend sitting on counch watching her fav show or being on mobile for facebook saying something like "anon clam down you are scaring me please stop it calm down anon!"
> immediately put on maniac stare and walk over to the room and quietly stare at your gf and as she look over at you with your sweat covered maniac face and say "a-anon what are you doing"
> swoop to your woman and grab her at both arm (backhand her in cheek if she have been acting up lately) say "woman! i best not hear you tell me calm down ever again, i dont take kindly to lady trying to tell me what to do, my woman would know better!"
> let go of her arm with shove
> turn and leave the room and resume the work
>not establishing domination and keeping your woman at check
I bet you guy let you woman walk around and do whatever they wish and sometime disobeying your order like bad dog!
(this post is intended to be comical you retards)
Although sometime i wish it was day of wild west where i can go cowboy style disciplining on my woman.
>>29486259
>Im pretty sure we have had this conversation before.
Many times. This is ARG after all, nothing is new.
I went the opposite route and got the dedicated YHM 5.56 Phantom QD Titanium first, and now I have the 7.62 version on Form 4 at my FFL.
I'm stoked to get it on my Mossberg MVP LC 308
>>29486290
>I'm stoked to get it on my Mossberg MVP LC 308
I picked up 200x Speer Hotcore 200gr PSP bullets for some subsonic loads. I'm just hoping the gunpowder gods deliver a can of trail boss to me at some point.
>>29486277
>(this post is intended to be comical you retards)
Except youre not funny. Go away. Im openly hostile towards you. Stop trying to be buddy buddy, you fucking little sperg.
>>29486290
Yeah. But I enjoy your conversations anyways. Im stoked to be getting a Savage rifle in 6.5 creedmoor soon. Should ship this tuesday. Still waiting for my AK to sell so I can buy a premium optic. I got some time until deer and elk season though.
>>29486290
>>29486312
>I went the opposite route and got the dedicated YHM 5.56 Phantom QD Titanium first, and now I have the 7.62 version on Form 4 at my FFL.
I did this to ensure that I wouldn't be tempted to put off the 7.62 can and never wind up getting it.
>>29486277
I realize this is bait and all, but she just asked me to calm the fuck down which is beneficial to both of us.
We generally have pretty good communication and bandle this stuff good
>1900 + 116
>hitting women
Nah
>>29486133
You are jealous of my smugness which reflect satisfaction on my quality of life and progress.
I dare to say of my handsomeness and good body frame which is only matter of time before i reach swimmer physique.
Perhaps my knowledge and experience at my age.
Although you being at el paso really should have easy card you shouldnt be bitter.
>>29486312
6.5 CM is a hell of a round. Not my first choice for hunting, but damn near perfect for paper punching (but still plenty of bullet for white tail).
I use a 300 Win mag for hunting, and a 308 for plinking. I rarely get to shoot beyond 500 yds, so the 308 is much cheaper to shoot.
For the rare times when I can shoot to 1,000 yds, the 300 WM can easily carry its weight with 190 gr FGMM.
Over the weekend I got RSO certified on the Sniper and precision warfare ranges at Quantico though, so all that might change very soon.
>>29486326
>>29486277
Jesus Christ, do you think about the shit you say or just say it and hope for the best?
>>29486277
>>29486326
>>29486322
Yeah thats why theres section at bottom where time of wild west and cowboy was brought up.
My woman wouldnt say shit like that though out relationships inform her what you dont like and expect of her if she cant do it she isnt one or your expectation is too high.
My mother didnt even say shit like that to my father.
Well actually she does but in much more genuine concern caring manner where she walk to backdoor and peer through glass and watch my father in garage and checking if hes okay or obviously needing help most of time she wouldnt say shit.
not in annoy-like shouting from another room as she sit in couch like if you are bother her not her being concerned for you.
One single bad or crazy girlfriend can fuck your whole world to shit. Be careful guys.
Mind over heart and dick.
>>29486401
>>29486344
#1 use will be paper punching/long range shooting when I feel the urge for such a challenge. Secondary use will be hunting. Thats the thought process at least. Until I have the money to buy dedicated rifles for those two rarely exercised uses.
My local range has a 1000yd range, and outside of that I have many thousands of miles of open desert at my disposal.
>>29486344
>Over the weekend I got RSO certified on the Sniper and precision warfare ranges at Quantico though, so all that might change very soon.
When I run the range for the day I get it all to myself for an hour and a half in the morning for myself and whoever I want on it.
>>29486368
> obvious bait with obvious implied baited and bait disclaimer
> still bited the bait
>>29486429
>My local range has a 1000yd range, and outside of that I have many thousands of miles of open desert at my disposal.
That's a rare gem; I was a member out at Peacemaker NTC in WV for a year. Their ranges were amazing--the 1000 yd lanes were electronically scored.
It just proved to be a little too far for the investment to pay off; I only went twice in a year.
>>29486449
Yeah yeah we know. Somehow we are the retards and youre just an amazingly awesome troll who fucks tons of bitches in real life.
>>29486452
Even rarer, its free and well maintained by a city basically run by democrats.
>>29486401
I'm so glad knowing that when I wake up tomorrow I won't be you or fucking taco tits.
It's a good fucking feeling and I'm sorry you will never know it.
>>29484392
Pretty shit, aside from sleeping in till noon. I'm buried in homework and just moved all my shit into a storage unit pending location of a new official domicile, so I can't look at or shoot my guns because they are buried. Hell I can't even post pictures of them at the moment because I accidentally stored the flash drives I keep the pics on. Plus I'm getting sick. I fucking hate life right now.
LKHJKLDFHKLDF
>>29486452
>>29486429
My family's land can must a shot of ~550 yds at its longest point. That's a fun challenge with the precision AR, but not much for the 308 or 300.
>>29486484
>that dewalt powder drill grip
What are those really called? How much do they cost?
>>29486401
>mind over heart and dick
This is probably the best advice I've ever seen come out of CG.
>>29486484
Man, that picture reminds me that I need to drop that rifle off at the gunsmith tomorrow.
I got it threaded about a year ago, and since then I've tried 10 different factory and hand loads and never got under ~1.5 MOA reliably.
Compared to the .5 MOA it was printing before I got it threaded, I'm almost certain that the crown got messed up.
>>29486428
> Guy that agree with anon who told gc to heat up his aluminum gas block 21 degree away from melting
> opinion remotely matter at all. literally almost anon teir
>>29486492
>dewalt grip
It's a precision thing. It's designed to be a shelf for you to rest your hand on so that it takes all the tension off your trigger pull.
http://www.midwayusa.com/product/1949360453/ergo-tactical-deluxe-sure-grip-pistol-grip-with-palm-shelf-ar-15-overmolded-rubber
>>29486474
Now thats a normie AR if Ive ever seen one!
>>29486484
I cant fucking wait to have a down payment for a house saved up. Goodbye living in the city or the edge of the city. Hello desert ranch house.
>>29486511
Oh, I know what it's for. I was just curious about it and poking fun at it.
>>29486290
>>29486300
Aren't you the huy who started precision shooting general? Those were good threads, why don't you do them anymore?
>>29486515
It's fairly tame for a normie AR tbqhfamily
>>29486515
>I cant fucking wait to have a down payment for a house saved up.
Get that USDA or VA loan if you qualify.
Just don't forget that any down payment under 20% is going to require mortgage insurance on your monthly payments--and that shit stacks up fast. It's usually as much as the payment itself.
>>29486523
If it looks stupid and it works, it isn't stupid.
>>29486526
Yeah, that was me. I enjoyed them, but I got into grad school in January and I just don't have the time to keep them bumped anymore.
>>29486463
>Yeah yeah we know. Somehow we are the retards and youre just an amazingly awesome troll who fucks tons of bitches in real life.
D-dude thats sad like fuck. You mean to tell me that you got none of that plentiful spic pussy floating around for white man in el paso?
Houston's like that too. Theres another city where small amount of white girl's like that but i aint telling.
Sad like fuck theres sperg who live in city full of slut and slut wannabe and never took any.
D-dude it isnt hard at all. AT ALL.
Dr8co's also proof of that for those who dont know girl or nightlife of those cities.
>>29486530
I know but still. Its pretty. I have a whole folder full of normie abominations.
>>29486533
I plan on it. But I want a big downpayment saved up. Im not owing some faggot bank money forever. I want that bitch paid off so I can live a free man. Fuck debt.
>>29486500
>>29486579
>insanely high rings and riser
>requires a cheek riser to shoot
kill it with fire
>>29486541
>>29486595
Nigga pls
>>29486615
>>29486615
>>29486615
Do normies know anything about aesthetics?
>>29486633
This is aesthetic to them. Thats the cancer of the normie.
Here we have a specimen of the "I was going to enlist in the marines but I was too much of a badass they wouldnt take me" in the wild.
>>29486645
>>29486645
b-b-but that's actually a pretty cool looking rifle, man.
>>29486615
>at the range
>suddenly some asian guy shows up
>pulls a case out of his car
>pulls his AR out
>16" carbine gassed
>UTG quad rail
>grippod
>removable carry handle
>BUT WAIT
>fuckhueg NCStar scope on tall ass scope rings mounted onto the fucking carry handle
>nigga is shooting it at a fucking <50 yard range more or less exclusively used for pistols
>fucker has a goddamn shoulder weld on it just to use his scope
>>29486665
I mean aside from the ACOG being mounted so far forward there's no possible way a sight picture could be obtained without doing unnatural neck gymnastics...
At least it has buis though
>>29486671
lmao
>>29486665
>>29486676
No... not really. Its put together wrong for starters. And everything on it is fucking airshit. The fakecog, the fake fucking peq15, and its just put together wrong. Im not even gonna go into it.
>>29486671
and let me guess, he made groups like pic related and was fucking proud of them.
>>29486665
>grip pod
>laser at 9 o'clock
>fucking wolf slayer
>bible verse or something
>acog to far forward
>angle grip
>rail covers
>skull lower
>plastic BUIS
>>29486692
He was shooting at a pumpkin. Did two mags and then just left.
Wish my phone wasn't dead or I would have snagged a picture.
>>29486704
>Implying there's anything wrong with standard MBUS
Nutnfancy would argue with you about that until you either killed him or yourself.
Shit, all my rifles that have buis have polymer MBUS. They're backups, not main sights, they don't need to be fucking metal.
>>29485852
You need a darker contrast on the pattern
>>29486692
Wow, you can tell all that stuff is fake just from that borderline for-ants picture? You must be a tier-1 firearms pro.
>>29486775
The ACOG is definitely fucking fake. Go look at pictures of real acogs, and then look at that picture and tell me theres anything beyond a "made in china" resemeblance? And based on the fact that the owner is obviously a poorfag mongoloid Id bet cash the multithousand dollar PEQ15 is also fucking fake.
but yeah sure. I guess Im just some internet badass.
>>29486769
>They're backups, not main sights
Exactly if shits gon so far sideways that your main optic has broken down I don't want to worry about my BUIS. Breaking
>>29486822
I mean, I hate the BUIS, but honestly man, they are solid af. Even I cant deny that reality.
I just dont think they look good.
>>29486822
Have you ever broken polymer MBUS? I have yet to, personally, even after 6k rounds and a bunch of 3gun matches...
>>29486769
>Nutnfancy would argue with you about that until you either killed him or yourself.
Why is that is it because he's nutnfancy or he discovered something bad?
Have you seen drop test where mbus beat few another aluminum buis like troy?
Huh? Uh? Huh huh?
>>29486840
holy god
pleasekillme, the rifle
>>29486841
I fell like a MBUS is more likely to break then a metal BUIS
>>29486844
>Have you seen drop test where mbus beat few another aluminum buis like troy?
That sentence was just 3 grammars short of making sense. Please try again.
>>29486853
You feel that way but dont be a woman. Feelings arent often right.
>>29486850
>>29486615
This is the worst one yet. I am in awe.
>>29486853
Do you worship in the Church of GI Mags, or the Church of Magpul Mags? Please tell me it isn't the latter, or you are a dirty heretic.
>>29486887
I don't own a single non polymer mag
>>29486899
If it's good enough for mags, it's good enough for buis. Now stop being a woman.
>>29486874
Im not trying to write perfect english. Here's better written one. few actually
Have you seen the test which shown MBUS beating few another BUIS made of aluminum?
Or i could write it like
Did you see the test where MBUS beaten few another BUIS made of aluminum?
Or perhaps like this
Haven't you not seen the test which MBUS beaten several BUIS made of aluminum?
And now im going to punish you with purposefully poorly written posts for being faggot.
Son. You really fucked up.
Faggot.
>>29486882
>>29486984
>>29486887
Comrade usgi mag user. That remind me yesterday something happened that spoken reason- wait sec i have to write poorly to fuck with this faggot>>29486874
It has been too long its time.
Its time.
VladimirTheRussian mode activated
VLADIMIR FUCKING ACTIVATED!
I yesterday me try sell o
Me of testing you wait please.
you wait now american pig.
>>29487040
Me testing two
>>29485777
Like my new Ar-15 :-^)
>>29487050
Hello me of back.
Miss of me yes?
I know thank you filthy american pig sucking of my asshole!
I OF FOUND MY NO TIME CLASSIC SPIDER GREENTEXT STORY FROM THREAD OF OLD YEAR AGO OP POST PICTURE OF BIG SPIDER HALF AS TALL OF HOUSE AND ASK WHAT /K/OMMANDO OF DO?
ME ANSWER YOU WILL SEE COPY N PASTE FROM ARCHIVE.
MY GREENTEXT IS NO TIME CLASSIC WORTHY OF SLOT IN ARCHIVE.
MANY ANON HAVE NOT SEEN.
*PHOTO OF SPIDER HALF TALL AS HOUSE
> be VladimirTherussian
> be strolling in suburban
> see pic related
> instantly slav squat
> yell cheek breeki
> 47yards around me is now Soviet russia territory
> gaint spider is in Soviet russia territory
> spider shudder in fear as i rose from slav squat slowly and alpha like
> i commence charge toward spider
> yell cheeki breeki damki
> spider frozen in sheer fear
> i leap like spetsnaz
> i land on spider and rear up with gaping open mouth
> i came down at spider with fury of thousand soviet man
> i bite spider
> i felt auditable vibration from spider skeleton crunch and spider collapse to death
----------------------------------------------------------------------------
IN SOVIET RUSSIA
RUSSIAN BITE SPIDER!
Not seducing it
Where do you thibk you are?
> be VladimirTherussian
> be see OP pic of big spider
> squat
> yell cheeki breeki
> i have caught spider's attention
> stand up slowly towering over it
> seductive strip my clothes slowly
> stroke my flaccid cock
> cock grew in throbbing massive cock
> spider visibility shudder
> spider approach
> feel to its eight leg footstep
> its approach
> my cock is now even harder
> i approach
> we now within ice breKer zone panting into each other
> my cock now dribbling precum
> spider put its two fore leg on my shoulder
> it closer itself to my cock
> it fang gently stroke along my cock
> i grabbed its two fore leg jn sheer pleasure
> spider stabbed both side of base of my cock with its fang
> i felt powerful venom bekng injected
> oh my i mutter as my cock grew
> my cock is now size of my forearm and as thick
> i watch spider crept upon me futher and plop on its back
> its two rear legs claw grabbed my balls
> left leg grabbed my balls with authority
> right leg does same
> my leg weaken
> it tug my balls with authority to itself
> i follows as good stud i am
> left leg now let go my balls and grab my cock at mid section
> right leg now grabbed my both balls
> it guide my cock into its webby hole
> i moan as sheer pleasure wave upon my body
> my hug long throbbing dribbling cock slide in with ease
> we now panting heavily
> i begin thrusting
> thrust we trhrust
> thrust
> thrust
> its leg play with my balls and squeeze very base of my cock behind my balls
> hnnnng i came
> we both flutter
> i collapse on spider and crawl to its fang as my cock slither out
> crawl i does
> i have met the spot
> its fang open up
> i made out with its inner mouth
> we now walk around in shtf
> i ride on her as she carry me effortlessly
Happy ever after
Not doing thing like me
What a plebian all of you
>>29485817
ID on that Handguard?? thats a sexy beast.
>>29487177
>>29487161
>>29487152
It's too early for this
>>29485913
What size punch are you using?
How are you securing the material while hammering?
From which direction are you hitting the pin?
If you're using a small punch, size up to a larger punch. If using a larger punch, vice versa. I found that expanding the contact area to where it was atleast as larger as the pin aided in starting pin removal as you've got more gross force being delivered through a larger area (If the pin is slightly extended from the material, obviously.) A small punch will deliver a lot of force to a small area but it may not be enough to break it free.
Also, ensuing that all force is delivered without loss of force due to material movement is essential. You may not this it be but it do. Have the material as secure as possible so that there is no movement in any direction upon striking. You want all energy to go into pin. Prop up all points of contact with something hard if you have to.
Are you the one with the m&p? I've read that they go against industry norms and install their pins from the opposite side of conventional wisdom. Typically, pins are installed from the right (side with ejection port) inward. M&P's are apparently opposite that so they're installed from the left inward. You SHOULD be hammering on the right side inward to reverse this, that is hammering down on the side with the ejection port. Even though you've got calipers on it in the pics it looks like the side that measures smaller (and you've obviously been beating on) is mushroomed and would indicate the larger end of the pin, or the side you DON'T want to hit. Even if you don't have an M&P it's possible that they could have been installed backwards at the factory. Hitting it from the wrong side may even break it up enough to ease removal.
I read you were applying heat to it. What method were you using? Make sure you aren't heating the pin itself but rather the area around the pin.
Best of luck mate, don't let your frustration sour you against DIY.
>>29485777
>Why isn't your rifle Cerakoted edition?
I've considered cerekote, but multi color cerekote is expensive and I'm not sure I'd always want M90.
Though I have considered doing an M90 Hydro-dip and going over it with clear cerekote.
>>29487220
>6 hours ago
Not that guy, but just in case you're around...
https://www.rockriverarms.com/index.cfm?fuseaction=category.display&category_id=380&CFID=548280434&CFTOKEN=17771603
The gun itself is a RRA LAR-15 Operator of some flavor
>>29488651
Like a miniature Mk. 12 rail
>>29486211
>this faggot here
What barrel profile get? Should I go pencil to save a few ounces?
I'm also considering an ACS stock kit from PSA or something.
>>29485777
checked
cerakote is too much $$$ and too difficult to remove.
>>29488476
I appreciate the wall of text m8, but it's stuff i already know. It's secured pretty good and I am hitting the correct side. My father also suggested smacking the incorrect side a few times to maybe break it free as well.
And yeah, idk what s&w was doing putting the pin in the other way. Oh well
>>29489043
Except you appear to be hitting it from the wrong way. Based off your pics it looks like you're hitting it from the left side inward. Which would be the standard way. If S&W did install it backwards you should be hitting it from the other side.
>>29489076
I'm hitting from the ejection port side. The photos are dark and shitty so it's hard to tell
>>29488476
Are you Wild Bill incarnate?
I just built my first AR and am paranoid about taking it to an indoor range to shoot for the first time. All the public outdoor ranges near me are closed on Mondays and a trip to the nearest private property isn't feasible for a work day trip. Should I go to an indoor and hope that I don't have any crazy malfunctions or discharges, or wait until tomorrow to go outdoors?
So I just found out AR Bumpsaws are a thing. I'm not sure how I feel about this.
>>29489109
Have you done a basic dry cycle test? Have you triple checked everything? If so then go ahead and put a couple rounds through it at an indoor. Trust your work
>>29489109
Are you paranoid because you don't wanna look dum if you mess up or because you're genuinely worried you are so incompetent the gun might explode?
Id say to see if the gun feeds ammo okay, check over the gas system and have at it
Part of me wants to shoot it, the rest of me just wants to throw up.
>>29489139
>closed bolt
>no quick change barrel
Why would this be a good idea
>>29489158
>>29489109
I wouldn't worry about it.
>>29489167
I'm on my first build, so could you guys help me out with something? I'm torn between 5.56 and 6.5 Grendel. I already have a long range rifle, and I would have to get a bunch of special snowflake parts to accommodate the round. How does the ballistic advantages stack up to the economical and logistical factors of buying and getting parts for the Grendel? Is it worth it?
>>29489158
Quick change AR barrels are a thing now.
Not sure how you could even begin to implement open bolt legally though.
Would rather just have an RPK tbqhfamily
>>29489124
>>29489135
More paranoid about looking like an asshole. I think I'm just going to be patient and wait until tomorrow. I haven't tried to feed any ammo yet because even a slight chance of accidental discharge isn't something I can risk where I live. I'll take the time run over everything again today and get an early start to the range tomorrow. Thanks guys.
>>29489179
5.56
>>29489179
It's not worth it. If you want a special snowflake round, get a Blackout.
>>29489139
>>29489186
Just weld your firing pin forward and use a magpul BAD lever as a trigger
>>29489201
Countering that trash you just posted.
>>29489201
Well what would................oooooooohhhhhhh. Isn't that interesting.
>>29489212
You like em thick eh?
>>29489201
I wonder if that could be legal
Wait
No it couldnt.
>>29489222
Thiiiiiiiiiiiicker
>high test thin pam will never come back
>>29489222
Pam is 8/10
>>29489213
>>29489225
(dont actually do this)
>>29489212
4u
>>29489222
>>29489247
>gooks
I am okay with this.
>>29489231
>>29489244
>>29489258
>>29489212
>I want to be crushed by those thighs.....
>>29487220
It an RRA Half-Quadrail you can get them for cheap on the RRA Website
Its an RRA Operator 2 Entry Tactical
>>29489139
>No gas tube
Whats the damn thing cycle on hopes and dreams?
>>29489094
I get more people saying I look like Custer. One group of reactors asked if I'd be willing to go with them one time to a reenactment.
>>29489317
I don't wanna like it but I do.
Also
>tfw had my rifle loaded and slung across my back all weekend
It's a good fucking feeling
>>29489326
I think you look a bit more like Bill. Custer has that billboard forehead going o which you lack.
>>29489326
You look like a chick with a fake mustache.
>>29489326
>magpul fixed stock
Whyyyyyyyyyyyyyyy?
>>29489370
You should see him dressed in girls clothing
>>29485913
>>29485928
NIGGER, DID YOU GRIND THE TIP OF THAT CALIPER OFF?
REEEEEEE
>>29489346
Yeah 50% of people thinkk it's ugly as fuck and the other 50% thing it looks pretty neat.
RRA is the only company I have been literally 100% safisifed with, and I own Colts and LWRCs.
I need to buy a forward QD mount so I can mount a Blue force 2pt Vickers sling.
The sling it came with is uncomfortable as fuck.
I've decided to buy a Texas Custom TCG-15 as my first AR.
I've spent months researching, shooting, and getting a feel for other people's guns. I was debating between a KAC SR-15, DDM4V11, and an F1 Billet rifle, and after shooting my friend's TCG-15 I fell in love. All of those rifles above were nice, but they weren't nearly as slick and smooth as the TCG.
>>29486225
What vertical grip is on that thing? Trying to find one for my sbr.
>>29489383
Because it's long. And I have love arms. I've not shot a rifle with a telescoping stock that I didn't need to constantly have at the longest possible extension regardless of clothing or position.
I suffer endlessly being 6'4"
>>29489370
You really should.
>>29489402
I'd rather see him out of girls clothing...if you know what I mean.
>>29489441
Good luck getting a consistent cheekweld. Even someone who's 6'4" can shoot NTCH.
>>29489441
If you cut your hair and shaved off that stupid mustasche you would look way better
>>29489426
I almost got a RRA upper but they somd out right when I went to order.
So did BCM.. And Aero... And PSA...
Then I found the PSA upper as a rifle "kit" for $50 more than the upper itself
>sold the LPK for $50 and the stock for $80 because they were stil brand new and in their packages
>ended up getting a complete $500 CHF Premium PSA upper with a premium BCG and a basic charging handle for $420
Feels good man.
>>29489465
That's like. Your opinion man.
I only like fuck with hipster bitches. And they love my set.
>>29489482
....I can only imagine the kind of women you would attract with the whole Custer look.
Do they also have mustaches????
>>29489441
Get an A2, I even have an A2 shell Ill sell you.
The magpul fixed stock is fucking uggo. No redeeming features even. You can add a QD socket to the A2 for $15 and having a drill.
You suffer from bad taste.
>>29489515
Its not bad taste.
Its no taste.
The guy I started coyote hunting with says he wants to build a twin to my SPR rifle.
Should I break it to him what the actual component cost is so far?
>>29488476
>>29489326
>>29489441
Handsome AF desu senpai. I usually ignore guys, but in your case I would reciprocate flirtations.
>>29489482
Precarious AF desu senpai.
>>29489515
What is wrong with Magpul fixed stocks?
>>29489567
uggo beyond belief
A1/A2 master race fixed stocks.
>>29489567
They look god-awful, not as durable or cheap as an A2, and if their Zukhov stocks are anything to go off of then they probably arent built very well.
test
>>29489088
just drill it
>>29489558
Choot dem, choot dem bof!
>>29486772
It got over saturated in the picture. It has better contrast in person.
I was struggling to find a good place to take the picture at 4 am.
>>29489436
Looks like a KAC broom handle to me.
>>29489422
No? Why would I do that?
Why would I use a grinder at all, much less on a precision instrument
>>29489489
Maybe. Maybe not. Don't knock it til you try it.
>>29489515
>>29489539
Because having the literal default stock implies taste? I'll take straight, angular lines and modern features any day over a triangle.
>>29489558
Domo arigatou kohai. Kawaii-desu.
>>29489567
Nothing that I'm aware of.
>>29489586
Spot the Fudd.
Sweet, my IWC package will get here a day early. Tits.
>>29489904
>angular lines over a triangle
>Posts pic of moe telescoping stock
What features are you using?
Sure dont see a sling.
Anyone use Australian Outback 69gr Sierra HPBT MatchKing?
>>29489904
Not my 10/22. My 22 is much nicer.
The magpul fixed stock is objectively uggo. You want a QD socket on your A1/A2? Its easily doable. Doing it again tonight actually.
The magpul fixed stock has zero redeeming features.
You guys get any snow today
>>29490074
That was yesterday
Enjoy my sloppy seconds blizzard
>>29490074
haven't had snow in a while. its a comfy 48f right now
>>29489555
yes and give him the msrp of the parts.
>>29490074
no
i'm trying to think of a way to kill yourself with a pair of shoes so i can tell you to do it.
i guess hanging yourself with the shoelaces would work.
>>29490105
How do you like the Geissele rail?
I've been considering buying the 13" MK4 MLOK forever now, but its almost 400 buckeroos here in Canuckistan.
>>29490123
well, that's a mk2, which they discontinued recently
i've also got a mk8
i don't think you'll find a more solid modular rail accept the KAC URX
>>29490151
I've had a hard-on for the MK4 since pic related was posted. IMO they're the best looking rails available.
![WP_20160404_006[1].jpg](https://i.imgur.com/twUjTym.jpg "WP_20160404_006[1].jpg")
>>29490074
Yeah, in fact it's still coming down.
![WP_20160404_002[1].jpg](https://i.imgur.com/1NEYczC.jpg "WP_20160404_002[1].jpg")
>>29490238
>>29490123
You forgot your customary Canadian apologies.
>>29490074
Short of global cooling being a real thing, there's no way it could snow here at this time of year.
#desertlife
>>29490039
It has a larger storage compartment with a large opening than the A1/A2
>>29490238
>fake colt scope
logo was wider on the real thing, nice $50 chink copy
>later style ejection cover
>fake A1 upper
>m1 garand sling
>fenced lower
if you can't afford to do a proper retro build, don't do it all.
>>29490290
To be fair, the only thing you should be storing in your gun would be papers or at most batteries.
You're just adding extra pointless weight otherwise.
Love, Nutn'
>>29490299
Autism speaks.
>>29490290
Please, tell me all about the various tacticool things you keep in your buttstock.
>>29490300
Or a cleaning kit/ spare bolt.
>>29490255
>>29490238
We antique posting
>>29490299
Literally, and I mean literally, ever attempt you just made was either incorrect assumption or just a flat out display of ignorance. I also mean it literally when I say you should kill yourself.
>>29490300
In my SBR SOPMOD stocks I keep my trust and NFA Paperwork. In my A1 stock I keep an alien wrench for my adjustable gas block. That's all they are good for.
>>29490328
Skittles, duh.
>>29490340
Cleaning kit can go in a pouch on your person, the likelihood of having to access it quickly is extremely low and would be better overall to be not in the gun. The bolt makes sense, but that could go in the pistol grip like what Magpul does.
>>29490407
Tactical skittles are acceptable.
Carry on.
>>29490371
Is that you?
Get it, cuz your old
>>29490300
>>29490328
do people not put little packets of lube/batteries in their storage?
>>29490340
spare bolt seems way too heavy to carry around a replacement for
>>29490473
Bolt is not BCG
>>29490371
>>29490458
Can't be him, no goat tattoo on his chest.
is dpms a legit option for a pre built?
>>29490574
>prebuilt
Why? But to answer your question, I think DPMS is.......just okay. I mean it depends on what you're going for. Is it budget driven or are you looking for some specific feature?
>>29490556
>556
>>29490591
>*hides post*
Aahh, much better.
>>29490586
I guess just budget, would I be able to build something better for around the same price? (~1300)
>>29490556
It could've been before the fetish
>>29490663
Better? For $1300.00? OH. HELL. YEAH. You know how to build? Got a wrench or a buddy with one and a vice block set? Got a color you like or just old school black? You like Magpul furniture or something else? You want rails? Answer these questions and Ima hook you up with some links.
>>29490663
Oh, or give me a link to the DPMS you were looking at and I can replicate that if it was exactly what you want.
Why do all ARs have muzzle brakes? I hate muzzle brakes.
>>29490839
Then get a flash hider.
>>29490700
This dude knows what's up.
>>29490663
For $1300 you should be able to walk away with a pretty good piece. If you stretch it you shot be able to fit an optic in there too. Always get iron sights before an optic though.
>>29490663
a budget AR is like $400-600. For $1300 you can build a pretty much premium rifle.
>>29490839
because they're useful? because they look good? because protecting your muzzle is a good idea?
>>29490839
>>29490556
>picrelated w/ "Reset the whole fuckin' village"
>>29490886
Noice.
Wolf is bretty good.
>>29490865
They look good but they make the rifle too loud
>>29491028
Wear ear pro silly
Thinking about getting my VZ cerakoted burnt bronze and getting black furniture.
My AR is sacred though, stealth gray on black looks too damn good. But if someone knows a way of making my mag stealth gray, let me know.
>>29491311
>Thinking about getting my VZ cerakoted burnt bronze and getting black furniture.
...why
