Manufacturing
Images are sometimes not shown due to bandwidth/network limitations. Refreshing the page usually helps.
You are currently reading a thread in /k/ - Weapons
You are currently reading a thread in /k/ - Weapons
Where I'm at its completely legal to make garage guns. Me and a friend are going to start with a 25acp, got prints/destructions. Any other easy to make garage gins out there? We were thinking a sten next. Any recommendations as far as tools/equipment would be legit. Pic not really related.
>>29195419
>We were thinking a sten next
Aren't stens open bolt?
>>29195465
You can buy a reduced diameter reciever tube so that it cant take a full auto bolt, and they make closed bolt semi auto conversion kits that cost about 250 bucks.
I got my parts kit and whatnot, just waiting on the 16 inch barrel to show up and I'm gonna get started on my build.
>>29195529
>You can buy a reduced diameter reciever tube so that it cant take a full auto bolt
Unless you have an ATF letter saying otherwise, open bolt is open bolt.
>>29195571
see
>>29195529
>and they make closed bolt semi auto conversion kits
If its not open bolt, its not open bolt.
Plenty of subguns have been remade as closed botl semi autos
Also, the ban isnt on open bolt, its on open bolt with fixed firing pins.
Read the letters.
>>29195419
Its super easy to start with parts kits than making everything from scratch.
czech out weaponsguild
Unfortunately I'm not an educated gun person. My partner in this venture most certainly is. This is my entry into this world beyond shooting stuff. Posting my to-be shop next
>>29195637
Keep us updated.
<thread slowly dies>
Start of shop. Not much. Basic tools and grinder. Still need drill press and much more I'm guessing. Whole garage was full of unorganized shit. Somewhat reorganized now. Still some shit. I gotta stop for now and go work. Ideas?
Closer up on bench.
>>29195419
If you're in the US and making "1 of" guns that is different than manufacturing. Please avoid using the word manufacturing when referring to your garage hobby, there are severe legal problems that could occur.
>>29195419
>start with 25
Fucking why
Just do 9mm, it's not hard
>>29197393
>>29197407
>has a towel clamped to work bench
Top Kek. These retards will be on the news, mark my words.
>>29195529
>>29195571
>>29195595
Sten conversion kits make the bolt into striker fired.
>>29199249
Op, listen to this guy.
Do NOT store or leave out oily rags when working with metal working tools that throw sparks.
"Possibly illicit local gun factory discovered after fire, tonight at 10!"
Even if everything is legal you now look like just another dumbass for the antis to point at and go "were not saying you can't have guns, were just saying only licensed corporations should make them, its just common sense!"
Also, get a fire extinguisher. Preferably 2 or 3 of them.
