Previous Help Thread >>8944348
Considering doing a cosplay of toy man from the DC animated universe (pic related). I figured the best way to go for the mask would be a buddy silicon mask from CFX (pic in next post)
Before I order it, does anyone have any other suggestions? Would it be viable to try and make something myself, despite having no experience? Or get something commissioned even?
>>8964382
Post in a new thread because didn't see this. Copy/pasted here.
First time cosplayer. Short enough to pull of the best character in Game of Thrones. Totally new to cosplay, can someone help show how I could get/make the robe/overshirt cape thing in the OP?
Thanks!
>>8964382
You can get a wig and try to use makeup to emulate his facial features. Red lipstick, bold brows, black circle lens...
>>8965016
You can use two long rectangular pieces of fabric and cross them in front and secure with a belt. Use Velcro to keep it attached to your chest.
>>8965080
That a really good idea. I can spread them out and layer them in the back for the psudo-cape as well. And then just get a standard fantasy/pirate shirt to wear under it.
How would one go about making this collar thing? I really do not want to use worbla.
>>8965217
I think I've seen it done with some kind of spandex. Probably wet-look to make it shiny
Hey, if anybody has a link to a tutorial for making troll horns out of earthenware clay (as in, non polymer, kiln baked clay) or would like to help me out? Bc I can't find any, or info on to how to secure the horns to a headband. Thanks !
>>8965321
You can make horns out of expanding foam and cut it to shape via the razorblade + paper mache method, then glue wire to a headband and have the headband be placed under the wig so that you can push the horns down onto the wires that way.
>>8965585
Is kiln fired clay not a good idea? Bc I have a good amount of access to it, but not to expanding foam
>>8965616
How big are the horns you're planning on making? The clay will definitely be heavier than any kind of foam (which you can get from a Home Depot or Orchards or any kind of hardware store for relatively cheap), so I think both could be viable options if your horns aren't too big.
>>8965080
Any recommendations on what cloth I could buy for this project?
>>8965644
A heavier cotton, brocade, or curtain fabric. Something with texture would be nice.Try going to the fabric store and just touching some of the fabrics in this color range. Make sure it doesn't feel too rough.
>>8965321
You can use aluminum foil for the base of the horns and add a thin layer of clay over it. The clay will be heavy, so a lighter material must be the base. The headband can go under the wig. Hope this picture helps.
>>8965817
Order should be from top to bottom: horns, wig, headband
>>8965321
It's been a while since I've used it but I used Model magic for making my troll horns. You could do what >>8965817 suggested and build model magic atop of them.
A lot of people have had bad experiences with model magic cracking or worried it'll be heavy but they're actually really light for smaller horns and once they fully dry out they're pretty solid. The best way to make them without cracks is to limit the air which, sadly makes the process rather slow but it minimizes breaks. Using a plastic Tupperware or plastic bin (usually lined with tin foil or wax paper) you can leave it open a crack for it to dry. Usually rotate them every day so they don't get flattened. Also seams make cracks so roll it out like dough and then sculpt.
When they're firm you can use fine grit sand paper and carve grooves if you want them.
If they do crack, use super glue to fill in the crack and it'll fill in the air pockets. Any unevenness can be sanded smooth and then covered with thick acrylic paint.
>>pic related
These took about 2 weeks to dry enough to handle and paint. The person who ordered them styled the wig around the hair band but I'd say go for the headband under the wig look for that seamless appearance.
I hoped that helped some.
Has anyone sewn a tailcoat jacket? What material did you use? Also, what pattern did you use?
Two parter:
1. I need to iron some white characters onto a black shirt. Would I need to cut them from light transfer paper or dark transfer paper? Probably obvious but the difference always confused me.
2. Can iron-ons stick to polyester? I've seen a bunch of people do it, but I've also seen a bunch of people say it doesn't work.
It's for a haikyuu uniform btw.
Has anyone ever done an actually accurate cosplay of this? What would be the best way to make the skirt?
What would be the best material to make a shiny black and golden robotic suit?
>>8966242
Smooth Cast 65D
>>8966304
Sorry to be nitpicky but what's the second best thing then? I'm more looking for something more like Worbla except very shiny.
>>8966376
Shiny paint on top of worbla.
How do I remove the fuzz from a felt plushie? Using a lint remover just pushes the fuzz around and handwashing didn't do much
>>8966758
By fuzz do you mean pilling? Shave it, then use your lint roller again.
I need to paint the soles of a pair of boots red, what type of paint would work and not flake as i walk because of the shoe bending?
pic related
>>8965945
Suiting or polyester twill. Pattern depends on what you want and how accurate you need it.
>>8966072
1. dark transfer paper, but I would do the fusible web applique method with white fabric + satin stitching. It will look a lot better and you can still iron the shirt/letters afterwards from both sides. Iron-on transfer paper will melt if you try to iron later and the letterings will crack and peel easily with stress.
2. Yes, but keep in mind a higher temperature is generally needed for a better bond and a higher temperature = more likely the polyester fabric will melt before you reach the optimal bond. That's why some people say it doesn't work (well).
>>8966076
I have no idea if anyone has, but looking at it, it seems plastic-y, so maybe something like wonderflex or worbla?
My question from the last thread went unanswered. Copy/pasting:
What would be the best way to achieve this hairstyle on a wig? I know that I'm going to need a lacefront, but should I make the bun thing right on the same wig, or should I make it from wefts and than attach it? (and if I were to do the latter how would I accomplish that)
I've never purchased a lacefront before so I don't know what the average price is, is it reasonable to ask for recommendations on where to find one that's under $100? I looked at the ones on Arda and one of them looks like it could be good, but since I am unsure if what method I should go about making the bun (from the wig or from wefts and attach it), I'm not sure if it will be long enough for what I need.
>>8966242
TranspArt, aka transparent worbla might be a good way to go. Just paint the inside of your pieces so it looks shiny/robotic from the outside and you don't need to fuck with clearcoat. Do your research on the material though, it does have a few quirks to working with it, iirc.
Looking for an old tutorial on how to wear a kimono off shoulder or oiran style. Google fu is weak atm I guess.
Does anyone know if heat n bond lite makes fabric really stiff?
Alternatively, does anyone know of any good heat bonding material that can be used for applique work and doesn't alter the hand of the fabric?
I need to applique details to the bottom of a skirt, but I don't want the bottom to be stiff and alter the drape. I've looked into Misty Fuse but I haven't heard of anyone's cosplay-related experiences with it.
>>8965945
i'm actually about to start on making one. i'm using twill and i found a jack skellington costume pattern at joanns that i'm modifying a bit
I just wanted to say that after all the help I've received; I'll be pretty fucking upset with myself if the project ends up looking like shit or unfinished. Like I've failed you guys, or something.
You people have been so helpful overall and surprisingly accommodating with my ineptitude that it's astonishing.
I posted in the circle lense thread but there's no help, so I have to ask here. Anyone know where I can get bright yellow contacts for prescription that won't cost so much? Everything I find is like 26$ per lens and I'm not going to wear them enough to pay that much. I have blue eyes if it helps
>>8967434
>wanting to be cheap with contacts
>>8967441
Well I'm not going to blow half a paycheck on contacts I'll be wearing once or twice a year
>>8967468
Is this for a cosplay or just for fun?
That's the cost of cosplay. It's a hobby, and hobbies are money sinks.
If it helps, you actually don't need to buy coloured lenses for cosplay.
>>8967565
>If it helps, you actually don't need to buy coloured lenses for cosplay.
But only if you like looking unfinished.
I'm putting together Lilith from FE, and I just sewed the skirt of her human-form dress. When it was on my mannequin, the skirt looked great, but when I tried it on the box pleats flared out a shitton.
Is there any way to fix this? Can I sew in between the box pleats to keep them down and from flaring out as much, or something? You can tell in the concept art that her pleats aren't supposed to be so wide. I'm wondering if this is unfixable and I'll have to redo the entire skirt to make it work.
Most of the skirt is going to be covered by an apron, too, so I'm not sure how big of a deal this is but it's bothering me.
>>8967565
I understand that and I've been doing this for years. I've just never needed yellow contacts for a Costume before. I can buy non prescription ones but I don't want to wear my glasses over my facepaint.
>>8964365
Confused on Dark Pit shin guard construction, is there foam for the base and just sewn fabric over? I'd imagine maybe you could slip the fabric over a foam base and maybe glued/sewed them on and then used fabric to fold over the bottom and maybe glued them up with the buckle already installed with vinyl ribbons to decorate? I think they used vinyl for the covers.
>>8967682
Another photo for the back of the Dark Pit shoes.
>>8967592
Not that this is the thread for it, but literally no one cares if you don't have the right eye colour, unless maybe you need sclera lenses for your character or something and it looks weird without it.
>>8967270
Mmm thank you! I think I'll applique it on then. It'll be fucking hard to do with Japanese characters, but this has helped a lot.
>>8967086
I'm also really curious about this. I've cosplayed characters with coloured souls and it's never gone too well.
>>8967270
>>8967384
>twill
Thanks, however, when trying to find it I can't seem to find it in thew color I need. Any recommendations to places that have fast shipping?
>>8967431
>Like I've failed you guys, or something.
You really shouldn't care this much. /cgl/ is a board that will call your entire cosplay trash if you so much as have on a wig 1 shade off or you actually dare to have fun with a character instead of being a 1:1 replica.
I accidentally punctured a hole in my EVA foam. What can I use to fill it?
Hey everyone, I'm currently working on Victor S. Court cosplay but I'm having some troubles with his staff; the upper part is going to be craft foam and black worbla, but I'm not sure what to use to make the body itself.
(Also, the talon thing at the base will be made with polymorph since it will add weight and will maintain its shape)
Thoughts?
>>8968112
PVC pipe.
>>8967592
I can't physically wear coloured contacts because I have an incredibly high astigmatism- so high that they don't even make coloured lenses that would be safe for me, and wearing lenses that don't technically fit could seriously damage my eyes.
It's easy enough to change your eye colour in Photoshop afterwards. No one should be that anal about a character's eye colour.
>>8968112
Sounds good, you could use a wooden dowel for the body. Look at how people make attatchments/detatchments too (i've seen people use bottle caps, even) since the top part is wide and having it come off will help you during travel.
>>8964365
I am new to the board and I don't want to post my own thread just asking for something. I am wondering if there is a resources page or something for someone interested in learning how to sew and looking for patterns.
In particular I am looking for a hanten pattern. I love how they look.
Hey, how can I get a way to prototype how an Eva foam set of armor would fit. I'm making a big helmet and need to make a simple version so tht I don't waste materials.
What would you guys say is a good material to make Skyward Link's tunic out of?
I ordered some swatches of fabrics that I thought would be appropriate and the one that stands out the most to me is cotton velvet.
Any other suggestions?
>>8968307
Honestly, making armor to fit well is always a little tricky. but what you can do is make mock ups of heavy-weight paper or craft foam (in the same size as the real thing, of course) to use as guides for the real thing.
When you're making the real thing, always cut them just a tiny big bigger so you can always cut down on size and always try them on as you go to make sure you got the size you want.
>>8968373
I'm a lazy fuck but desu I'd go with gabardine and line it with interfacing to thicken it out a lil
>>8968373
Yeah. It's relying on electronics and an acrylic dome. I need to find out how it will fit on my shoulders and how I can interface the electronics without burning money on Eva foam and exacto knives that I can be using later.
I've seen a ton of different ways to seal bodypaint, and I really am confused on what products to use since everyone agrees on different things. I'm only going to be painting my face and neck, the rest will be armsocks. But I'm going to be in the Texas summer while wearing it, is there any way to really stop it from smearing everywhere?
>>8968429
I've used the alchohol n water spritz bottles and they work wonders.
>>8967598
It will probably be noticeable, so for your own sanity i'd try reironing the pleats in such a way that doesn't mean seaming ripping the entire thing to see if it helps it sit right (maybe after you make the apron to see if you can hide the mistake), failing that you may have to do some surgery to fix the skirt.
in the future give your dress form some hips
>>8968432
What brand did you use? For the paint I mean.
>>8968439
That's exactly why I'm trying super hard to avoid smearing, I don't need to become another one of "those" cosplayers.
The exact color I need is from a brand called Wolfe, but I'm sure mixing ben nye powder with other brand face paint won't do much harm.
Should I get makeup setting spray, or something tougher?
>>8968445
Accidentally deleted my post, but powder is w/e I just use Leichner stage powder and a kryolan fixing spray over snazaroo. You don't generally need to your face/neck to be TOO safeguarded because there's not much friction going on.
>>8968429
Water activated cake make-up like Snazaroo, Ruby Red, Wolfe FX, Diamond FX, Kryolan, Chamelon, Kryvaline, TAG, and Global are all super easy to use. However, because they're water activated, they come off with water and therefore can come off with sweat. Setting powder and sealing spray (like Ben Nye's final seal) will increase longevity and prevent transfer.
Cream based paint like Ben Nye will stay longer while you're sweating, but they are a little more tricky than water based paint and they will transfer more. You set them with setting powder.
Alcohol based paints are probably the hardest to use and the most expensive, but they stay on the best. They are very hard to get off (you have to use alcohol to get them off) and I don't recommend using them on your face if you can help it. Set with powder and setting spray.
Can anyone think of a way to satin-stitch an applique on an analogue sewing machine with no stitch length settings? Would doing it by hand be too messy?
What type of fabric should I be searching for for strange juice's cape and shoulder pieces? Any tips on how to sew it?
>>8968445
Snazaroos, it's cheap and it has prime on amazon. It was a last minute decision that worked wonders.
>>8968429
I use ben nye aquacake, and activate it with liqiset and set it with their setting spray and colorless powders
cosplaying pic related
I have a HUGE burn scar that im really self conscious about running along my power back; in picture it would be between the bottom of her top and the top of her pants. How would be the best way to over it? Or Should I modify the top to cover that part of my back?
>>8968489
You mean you can't adjust the length and width? Is it from 1914?
>>8968641
Try applying skintone makeup over it.
>>8968641
Try Kryolan Dermacolor Camouflage Cream? Apparently it can cover tattoos though I can't vouch for that myself.
>>8968645
It's a really solid machine that's recent enough, but it does not have the ability to change thread width/length. I didn't think to check if it did at the time. A damn shame.
I'm struggling with painting my first prop, I applied multiple coats of Modge Podge to my foam yet my spray paint still easily chips off. It's based on acryl. Anyone know what causes this? Should I do something like a layer of paint, Modge Podge, paint and so on?
>>8968715
Try using PLastidip. Gives it a good solid area to bind to
Would it be poor form to wear a Teen Titans cosplay to an Anime con? (fanime to be exact)
>>8968741
No one would care
>>8968715
Are you using the right formulation of MP? I always heard to use white glue, but I've never done it.
>>8966402
Use Color Coat or something similar
>>8968741
No one really cares these days. If they did Teen Titans is still heavily anime influenced depending on the iteration. Only time you should care about that sort of thing is when it's a franchise specific con like Blizzcon and I'm sure that still gets plenty of Harley and Deadpool.
Complete amateur with no real experience looking for a new hobby and ive really wanted to get into making stuff from Eva foam for awhile.
Am I about to get in over my head or am i in for a wild ride into the /cgl/ world
>>8968681
If it doesn't have zigzag (satin) stitch, then you just can't do it automatically by machine. Closest would be to manually do every stitch on the machine, which would be exceedingly tedious. Doing it by hand is also very time-consuming and difficult to have even and clean unless you're already quite good at it.
I'd recommend getting a solid $80-$140 Brother machine to do the satin stitching for you, the hours wasted/spent on trying to coax a machine that doesn't do it or by hand just isn't worth that many labor hours.
>>8967788
Make a stencil or trace from actual Japanese characters, please don't try to freehand it if you don't know Japanese or Chinese. It will most definitely show if you try to "draw" Japanese letters without knowing the language.
As a male, is this as far as I need to go with makeup? Or will photos still look bad without more extensive techniques/contouring?
https://www.youtube.com/watch?v=TBZgKOqnPFs [Embed]
First time taking on a god-tier outfit, and I've gotten stuck on the hood, boots, and mask. For the hood, I'm using knit fabric, but I'm wondering if I could add something like interfacing to help its shape. The boots, I'm not sure if I should attempt to tackle boot covers or say fuck it and just buy the boots. In terms of the mask, I have no idea what to do.
Any advice you could give me helps a lot, thank you!
>>8968839
Don't look here, go to the RPF. Armor threads here can be helpful but those guys are better.
>>8968681
You really gotta indicate what the machine is capable of. If it can only do one straight stitch then no. In the case that it's like the IKEA sewing machine you could still manage it with a stitch like F and just feed it through the machine slowly or go around twice. Also depends on how complicated your design needs to be or if you just need to tack the edges down or you want that ropey satin finish.
>>8969118
Thanks Anon! I posted just before going back to work. I'll check it out now.
What sewing machines are recommended for custom embroidery? I was thinking of buying one and I'm really unsure which to bother with. Preferably something not too expensive.
Any tips for getting cleavage when wearing strapless bras? I'm an A.
>>8969105
Actually yeah, that's all you really need. Unless you want some dramatic results, there is no need to contour or anything of the sort. Just some good matte foundation to even out your skin and make sure you're not shinny--unless you want to look shinny--and you should be fine.
You can always go a little further and give a little extra color to your eyes with some brown eyeliner or a small amount of eye shadow, but it's not essential.
If you're worried about the outline of the pics still, just experiment. See how much product you need on your face to get the look you want on the pics. You won't know for sure until you try.
>>8969108
The boots look very simple, I think you can get away with attempting to make boot covers with some stretch fabric. Make sure it's a four way stretch, though. There are lots of tutorials on how to make boot covers out there. This one's my favorite, though:
http://pre02.deviantart.net/bc13/th/pre/f/2011/088/3/f/no_stretch_boot_cover_tutorial_by_firelilycosplay-d2o87k0.jpg
I know it says 'no stretch fabric' but use it anyway and make sure you're using a stretch stitch on your machine. The stretch fabric just gives you more room for 'mistakes.
As for the mask, it looks very simple, simple to the point where I think a well-made craft foam mask would do fine. If you want something a little more fancy, you can try your luck with a PVC fabric made one. Since the hood is gonna cover the sides of your head and back, you can just use a stretch string to hold it to your face. Don't over think this, dude. Good luck.
>>8969319
Well, you ca always go for one of those 'upbras'. I think you can wear those strapless and still have a pretty good cleavage with a bit of stuffing and a little make up to make your boob lines more apparent.
If not then, you can always buy a push up bra a cup size bigger than your own, get the 'invisible' straps and go the stuffing and make up route.
>>8969540
Thank you so much!!
>>8969540
Thanks senpai
I don't normally post but I'm looking for a cat woman (Arkham knight ideally) suit, can anywhere suggest where i can look? I don't want to look like a domme but I also don't have like €500, please help ugh
>>8969307
I have a brother pe770 and it's great but I don't know if you consider $600 to be expensive. Look at amazon reviews for different machines then check the ones you like on youtube to make sure it suits your needs.
Reposting since nobody answered my question in the last thread.
I'm trying to make a scabbard for the master sword just to put up on my wall (I already have the sword and shield), I know how to make the scabbard itself, but what's the best way to make the golden bits?
Does anyone have any references saved of Bishamon from Noragami in outfits other than her main bra outfit? It's too revealing for me but I don't really like her black suit either.
>>8970360
I'd probably go with worbla.
Where is a good place to buy craft foam in bulk?
Im thinking about doing a Wilfred cosplay, any advice??
>>8970587
I would like to know this as well, preferably enough to make a sword of over 1 metre?
>>8965221
I wanna do a blue spirit cosplay, and I have this really nice pair of black silky looking kung fu pants, and a sort of Underarmor type of long sleeve shirt (completely black, no logos or anything).
They match each other really well, would those work or is the fabric not appropriate for the character?
>>8970605
Get a basic animal onesie costume pattern, find the rattiest fur fabric you can, get thick needles for your sewing machine.
That's pretty much it. I've sewn three costumes with this same basic pattern, it takes under 2 hours to make even if you're a novice.
>>8970726
Didn't mean to quote anyone there, my bad.
Hello everyone I was recently quoted for this costume and they wanted $580 for the entire coat nothing else is this a rip or good value?
>>8970762
Everything is a rip off unless you make it yourself. Who quoted you?
>>8970762
Tbh that's a pretty complex coat there. Plus nice materials won't be cheap and the pattern is custom to fit you. You're buying from a skilled worker not something mass produced in China by workers who get $2/hr.
>>8970773
A page called Professional Cosplay Commissions Service.
>>8970784
>Professional Cosplay Commissions Service
that's a legit quote, were it from a reputable commissioner. judging by this place's website, they look to be taobao resellers. no way a non-industrial level producer can pump out that much stock just for publicity photos.
>>8970857
So would it be worth to continue with them? I don't know any commissioners.
>>8969319
Hello yes. This is my area of expertise! I'm an A/B cup size. All I do is use duct tape (please use a better option I'm just lazy to buy proper stuff) and a bra two sizes too big. I literally tape what ever boob I can grab together to fake clevage and then contour the heck out of it. Because all the boob is being squished to create clevage you'll need a bigger push up bra to create the volume on the sides. In this particular outfit I just stuffed my top with socks. Im half ass I know. But the results speak for themself lol.
>>8969108
i made her a couple years back, used stuffing in the hood. was nice and comfy and i'm pretty sure i used it as a pillow at one point after the fact, interfacing may not be strong enough to get the pointy end. i personally bought boots cause i was still very new but they aren't a difficult or complex design so you could definitely make them. for the mask, i made one from the same fabric as the dress with interfacing.
>>8970982
what tape would you recommend for someone to get?
Thank you, by the way, from fellow tiny-titted lady.
any ideas for the best way to attach the cape on the front to pic related's armour so it drapes right? any advice for what to make the circlet out would be appreciated also. clay seems like it'd be too heavy and fragile. worbla scraps maybe?
>>8971266
Worbla noodles maybe but you'll need a lot of finishing and smoothing gold paint us unforgiving. Maybe plasti morph would be smoother
>>8970360
Foam and plastidip. Worbla's too rough so I wouldn't suggest it.
>>8970865
Email Hex Mortis or Volpin Props and see if they can do it. Hex is great and reasonable, idk if they specifically make certain things but it doesn't hurt to get a quote.
>>8971249
DO NOT USE DUCT TAPE. Get medical tape, or some kind of athletic tape meant to go on skin.
>>8970773
>$580 for a custom, intricate coat with applique is a "rip off"
Are you this big a moron in every thread you post in, or did I just get lucky?
What's the best way to go with swords made of foam? Metal rod inside? Worbla, or something else to make it sleek and sturdy?
>>8971460
I think most people use a wooden dowel if they want to make it a little more sturdy, but plenty of people also just use gesso or some other sealer to give their foam pieces a little more stability.
>>8971366
Shoo. If you make everything yourself then you know how to get the best deals on materials and everything will fit like a glove, provided you know what you're doing. A commissioner likely isn't going to account for 50% off discounts at wherever they shop from.
>>8971469
Will gesso really help it survive a con?
>>8971509
So youre just retarded, got it
>>8971646
Get bondo, sand to perfection, then Plastidip, then your regular paint. Also if you're really worried about structure cut the flat shape out of plywood then put insulation foam on either side and shape it.
Prop newbie but I wanna make Sting from the Hobbit. Is it way out of a beginner's hand to make it glow?
>>8971784
You should be able to do it, I remember doing similar projects learning about circuitry in school. Check out some of Kamui's tutorials and props for inspiration and more pointed advice. https://www.youtube.com/watch?v=4HR6yDJDf6w
>>8971801
Thanks a ton! I'm doing Bilbo and felt the ring alone was a bit of a cope out prop
Can anyone recommend a good place to buy a lycra spandex zentai suit? And if possible one you can get made for your own measurements?
There are so many places I don't know where to order from.
>>8971658
Bondo, the car stuff? If you say so.
I was thinking of hot gluing a metal rod in the center. I hope that doesn't melt the foam
Ehat are the best/most cost efficient/easiest to work with materials to make prop armor with? I'm talking heavy plate armor with lots of pieces and layers.
Planning on Lulu for my friend's Yuna anyone know where I can find decent pictures of her embroidery? My machine is pretty good about making decent pictures into files but I can't find anything for Lulu while my friend's Yuna files are all set.
>>8971900
EVA foam.
>>8971900
easy and cheap method is foam-seal-spraypaint-seal. Basically any yoga mat/craft foam, seal it with a craftglue/water mix (Modge Podge), spraypaint/paint, and then seal again. It's cheap and relatively fast. And you can glue that onto sturdier materials or add wire.
However, it's still fragile. be careful of what paint and how you seal because brushing up against stuff will chip it. But it's cheaper then alt stuff so it's pros and cons man.
>>8971658
What kind of Bondo? They make like a million different products
What would you rec for the inner/tan portion of the ears? I have fur for the back, and I know how to make them, I'm just stuck on what to make them out of. felt looks cheap and more fur seems wrong, especially since it's supposed to be skin and match own tone.
>>8971953
The body filler.
>>8971956
shit better pic
>>8971953
Body filler. Beware, it will not be sturdy.
My char's hair is this short, as is mine. Think I can get away with styling, then freeze spray? I'm having it professionally dyed.
>>8971964
liquid latex with a fabric backing like elf ears?
>>8971866
Bondo is just a filler and pretty common in making hard bulky props. It doesn't have to be just for cars. The hot glue will melt the foam a little bit but it won't tear through it unless you've got it to molten temps. Wood glue might be better if you're worried.
>>8971964
Moleskin? Comes in fleshtones and is just a bit fuzzy. You'll have to find it in the first aid section. It's how my mom made cheap elf ears for me back in the day.
Making a cosplay of Kindred with my best friend, I'm doing Lamb and he's doing Wolf. We're doing it in a more of a humanised tribal version, but I can't figure out what type of wig would suit her best.
I found these two gradients:
http://www.ebay.co.uk/itm/New-Long-Wavy-Silver-white-purple-cosplay-party-hair-Wig-/182047351410?hash=item2a62de2272:g:GsgAAOSwZQxW3kGw
http://www.ebay.co.uk/itm/Harajuku-white-and-purple-mix-long-curly-cosplay-WIG-/351592762923?hash=item51dc8fce2b:g:I5YAAOSwcBhWXIIU
Or a pure white wig like this:
http://www.ebay.co.uk/itm/Mixed-Color-Anime-Cosplay-Wig-Ombre-Brown-Pink-Purple-Blue-Red-Gray-Full-Wigs-O-/371597912631?var=640609691156&hash=item5684f62a37:m:muVaK26dD34C5uoKMe2L0VQ
The wig would be styled to have beads, strings and braids in it too, to keep to the tribal theme. I'm unsure what to do with my wolfs hair but he'll be wearing a hood anyway.
>>8972002
Thats a good idea anon, thanks!
>>8972009
Additionally, I've no idea what to do with Lamb's torso, I've already figured out her legs up to her waist, I just don't know how to give her a graceful torso design.
>>8971967
Okay, as long as the sword doesn't snap in half or something
Anyone have any recommendations on how I should paint my armor for Silas from Fire Emblem Fates?
Looking at Krylon black metallic shimmer or possible using a silver base,dusting some gun medal,and then rubbing black acrylic.
Trying to cosplay Josuke Higashikata. I have a little more than a week to sew together his uniform, but I don't know how to sew. I have friends that do, so I should be fine, but I don't have an exact pattern for his top, and I have no idea how to do the flaps. Help?
>>8972182
Simplicity Matrix coat pattern or the McCall Civil War uniform should be a good base
>>8972182
> I have a little more than a week to sew together his uniform
You mean your poor friend(s) who ends up with the task will have to bust it out in a week & figure out the collar/lapel patterning for you. You can go with a commercial pattern like >>8972197 suggested and modify it. Buy pants to match from a thrift store.
>>8972239
To be honest, they only really have time to explain my sewing machine to me, and everything else is my work.
does anyone have advice on how to scale down a pattern?
>>8972090
My friend did this and it shittered
Hoping to make the book of the dead from the mummy. On her on Evie won't stand out But curious what would be best material?
>>8972607
Laser cut balsa would be so titties for that
I was considering some ambitious Lemongrab cosplay this October. I can't figure out how to make his head shape though. Any ideas?
>>8972657
Some would say chicken wire and paper mache, but I think that'd be pretty heavy. I'd say clever geometry and yellow posterboard.
>>8972618
I would second this.
Just layered lasercut balsa wood.
A question for myself tough.
What kinds of embroidery is there out there? I want to make myself a neat dice pouch, and i want to make it fancy. Is embroidery the best way or are there other techniques for putting patterns on pouches (no colouring, it has to look really good and be permanent).
Need help finding this skirt for Lisa.
>>8972871
There are many different applique techniques. Satin stitch, heat and bond, straight stitch, reverse applique. it all depends on the look you are going for.
>>8972971
http://lmgtfy.com/?q=short+purple+slit+skirt
>>8973142
You think I didn't do that? I ask because everything I see is too long or the wrong style.
>>8973208
You're probably gonna have to modify it. There's an extremely low chance you'll find exactly the cosplay item you're looking for in a mass produced garment.
>>8972009
>>8972022
I think a lacefront could work really well, and it would give you the pushed-up, slicked-back look that Lamb has going for her. Just get a white one and sharpie dye the ends purple, trying to find a premade wig for gradients isn't the easiest of tasks.
For Lamb's torso, you could work with some fitted-bodice type of blouse. This is a weak example, but it is a flattering and slimming type of cut. If you tried something sleeveless, it could probably work within your theme.
>>8973135
Tell him to get a job
![maxresdefault[1].jpg](https://i.imgur.com/o32coM4.jpg "maxresdefault[1].jpg")
I'm not good with makeup.
Anyone know what I should use to draw Dragon's tattoos?
>>8973300
He tried that already if you bothered to read it.
>>8973303
If you want to make it look like a real tattoo, liquid eyeliner with powder on top has always worked for me. If you just want marks on your face, some bodypaint should work.
>>8972009
I'm doing the same and I was looking at this one, though it'd need to be dyed. Maybe you can consider it too.
http://www.wigisfashion.com/collections/white-lace-front-wigs/products/lf741c
>>8973311
Not that anon, but you never said anything about a job. All you said was he couldn't get any money, which is incredibly ambiguous. That could mean he asked his parents and they said no, it could mean he tried to mow lawns for cash, it could mean a ton of things.
>>8973312
>>8973303
Cool thanks
Anyone have any advice on hair.
I have no idea how to deal with long hair I've been growing it out for the past couple of months, and I can barely control it.
>>8973311
>>8973135
Tell him to get a job. If he's desperate, there are plenty of retail/labor jobs that require no skill and pay minimum wage, but money is money if that's what he needs
>>8973311
Maybe you should read it because it said nothing about a job.
He should prioritize getting money before going to a pony convention
>>8973135
Is this some kind of jew scam
>>8973318
>>8973287
I have no idea how to apply lacefront wigs, would they be necessary if I'm wearing the mask all con? That blouse seems like a good idea, thank you, although I've no clue how to tribalise it, I want something graceful but something tribal too to fit with my Wolf. i'll look into blouses though.
>>8973392
You need a lace front wig with a widow's peak and you need to cut and style it. I'd suggest this one. https://arda-wigs.com/shop/virginia-classic/
>>8973429
Nah I have a widows peak if I pull my hair back enough. I just can't do it yet without holding it with both hands because for some reason my hair keeps coming back to the front, maybe it's not long enough yet to do without some gel or something..
I was talking more prep/products.
The most I do now is use conditioner. I don't have any experience with hair products aside from shampoo/conditioner.
Also, I don't want to use a wig when I don't need one! I know my hair isn't super long like Dragon's but it's good enough. And the next con I go to is in another month so that's more time for some good growth
>>8973460
Go to the hair thread.
>>8973460
Your natural hair won't be able to keep those spikes all day and it's be easier for you to just get a wig and style it ahead of time, but it's your costume and I don't care enough to give you the typical seagull rant on wig use.
http://cosplaytutorial.com/list.php#WigsHairSpiking
>>8973311
>being this sassy about wanting anons to shill out money for some lazy fuck
tell him to get his fucking priorities straight, conventions are a hobby. If you want it badly enough, fund it yourself
fucking bronies
>>8972717
Not a bad idea, thanks. I have plenty of time to get it right too.
>>8973312
>liquid eyeliner
Similar ordeal, but the tattoo I want is bigger. Any recommendations for a brand of body paint? Water resistant and all that.
Anon, you're my only hope.
This happened yesterday, and to be honest, I'm pretty excited so I decided to go for it, but I need to know: Is this something possible for a beginner? I'm just now learning to sew
>>8973303
You can use temporary tattoo printer paper. A jinx cosplayer turned me to it and it comes out pretty nice.
>>8973659
Kryolan and Ben Nye are the leading brands.
>>8973666
This is an intermediate project, I'd say, but if you're determined you could maybe make it work, but you'd need to give yourself extra time and materials to learn and practice with. Some specific advice from a friend with more knowledge would also be helpful, as you'd need to learn about sewing basics, seaming different fabrics together (if they're not the same type of fabric there can be tension issues that cause puckering and broken threads), using interfacing, collar construction, armor construct, glove construction, garment shaping...
>>8973659
You're cosplaying Michiko too?
I've used Sharpie before and had no issues, but Sharpie tattoos tend to be obvious, plus they fade and will definitely do so in water.
Ben Nye is the recommended body paint for tattoos iirc, and there's a waterproof sealer.
I was going to try out a waterproof black henna marker but it's still in the mail so I can't make any real recommendations yet.
>>8973659
Wolfe FX, Diamond FX, Mehron Paradise, Kryolan Aquacolor, Diips, Proaiir. Diips and Proaiir are both water proof, and you can look into other alcohol activated paints for more longevity.
>>8973691
Holy shit, do not use anything that says black henna. That stuff can scar your skin. If you want something that will stain and look dark look into jagua.
>>8973689
I have lots of determination and I don't plan on going anywhere soon. I also have no friends, but I do have the internet.
>>8973693
Sorry, I should have specified the marker I ordered isn't actual black henna, it's an "FDA approved safe alternative" alcohol-based special effects body paint in marker form.
>>8971232
Thank you! This really helps!
Any ideas on how to make a snake tail? I assume it would involve assembling the "Pieces" somehow, but I'm a complete loss about where to start.
Not sure if this is the right thread to ask in, but I was looking for some advice on photographers. I've done a good amount of cosplay in the past but I've never gotten good, professional quality pictures taken of them. My question is, how do I pick out a photographer? What's the general protocol, do's and don'ts of working with one? If it makes any difference, I live around Los Angeles.
I'm wondering about how to go about getting a certain skintone. Something grayish, but not full on gray, just skin tinted gray. Thinking about doing Ghirahim from Legend of Zelda for reference.
Bodypaint would probably not be worth it, especially when I want to tint my skin more than paint it, but how would a sheer bodysuit in the right tint look? Would it be too obvious it's mesh in person, or does it give the illusion of skin without close inspection? Would I be able to use makeup on my face and still make the neckline seamless, or would lighting and other things alter the look of the mesh against the makeup? I'm pretty new to cosplay but I've been interested in learning.
![[coldhell]_Free!_NCED_v2_[D18686EF].mkv_snapshot_01.01_[2015.11.09_02.14.48].jpg](https://i.imgur.com/z7jFEHb.jpg "[coldhell]_Free!_NCED_v2_[D18686EF].mkv_snapshot_01.01_[2015.11.09_02.14.48].jpg")
I'm kind of stuck on how to do his jewelry while making it look at least kind of like part of a set. (also just in general)
I'm planning on making the arm things from craft foam covered in golden vinyl wrap so I was thinking of making the earrings the same way and then just using spirit gum or s/t to attach them and then maybe clay for the golden necklace and wrapping that too? Any better options for that stuff? And any recommendations for the other necklace? His golden necklace also has a weird thing on it, for reference.
>>8967871
how big is the hole and is it on a spot that might bend or flex?
>>8968302
google. Good on you for not making a new thread though.
>>8967381
I just sifted through over twenty minutes of videos on a material I will probably never use to bring you this answer. Short answer, no.
It seems like the bonded area makes the fabric a little stiffer, but not "really stiff". Granted I got this answer by watching usage tutorials and carefully watching the people pick up the piece when they were done and looking to see how the fabric moved, so try it out for yourself and take my answer with a grain of salt.
>>8971249
>>8971307
I've heard of people using bondage tape. It sticks to itself but not skin/hair. Definitely safer than duct tape.
>>8971281
Is Volpin doing fabric now?
![[coldhell]_Free!_NCED_v2_[D18686EF].mkv_snapshot_00.59_[2015.11.09_02.14.26].jpg](https://i.imgur.com/sU0hDKM.jpg "[coldhell]_Free!_NCED_v2_[D18686EF].mkv_snapshot_00.59_[2015.11.09_02.14.26].jpg")
>>8974271
Aforementioned weird thing and more jewelry references.
>>8970982
I tried this this morning and it worked perfectly!
I'm cosplaying pic related, and I'm unsure how to proceed for the armor "belts" he has around his waist. Should I just heatform foam around myself (or a tape dummy of my midsection) ? I've tried looking at historical armor pieces for inspiration but I haven't seen anything similar.
I'm also conflicted on how to do the greaves, since the ones I've seen all seem to be open at the back, and his are in one piece that shields the whole leg. Is foam flexible enough to just slide my foot in ?
>>8973754
Either you make it a long ass tube of some sort, or think clever and make a skirt that looks as if you were a coiled snake. Depends on what you want a photoshoot or a cosplay you can walk around in..
>>8973139
Oh thank will check these out. I want to make a pouch, most likely out of velvet, or would that be a horrible material choice.
>>8973973
Look at the Homestuck thread, they have links to tutorials about how to make arms socks. Use those for your arms, get tights for your legs, and find matching paint for your face.
Having trouble finding the right color wig for leo
could anyone give me a suggestion?
>>8974275
I know Volpin does cloth internally, not sure about commissions.
Hex definitely does though
I have a bunch of questions regarding Elise's corset thing.
Is it armor (made with craft foam) or leather (made with pleather/vinyl)?
How should I approach doing the hearts on it?
If I bought something from a seller who specifically stated "I'm not responsible for lost packages" but is overseas and I didn't get tracking, would I still be able to file a claim via PayPal if it doesn't arrive? Or am I fucked?
I would like some fabric suggestions for Saitama's hero suit. Despite what a lot of people use, I don't believe that the suit is made out of spandex.
From what I can tell I'm looking for some sort of matte fabric with a slight stretch, probably a cotton blend with anywhere from 2% to a max of 5% of lycra or spandex(but probably not that high because it wouldn't be something like jersey either) but I have no idea what such a thing would be called (I've scoured google but I've found nothing useful).
I've thought about the things that coveralls/jumpsuits are made out of but poplin apparently wrinkles like a bitch so I don't think that's it, and twill is out due to the weave so I'm out of ideas.
Seagulls, have any of you ever done Yowamushi Pedal before? My friend and I are going as Aoyagi and Teshima as 3rd years, and I have some questions.
1) I know that you're not supposed to wear underwear under the shorts, but I don't think I'd be completely comfortable going no-pan all day. Can you recommend anything I can wear under them that won't give me a weird visible panty/other line?
2) I've never crossplayed before, are binders flat enough to not show lines under the jersey? If not, is there something else I could do?
3) Are there any buyable road bike shoes out there that don't look like shit? Wearing tennis shoes would just be half-assed.
Reposting from the now possible dying wig thread.
Recommended wig for her?
Thought about using Arda because their wigs are so thick, but nothing really matches. Unless I curl one of their straight ones.
The only wig that I found that's close to the type of curl I want is white, so Id have to dye it.
>>8975027
if you dye the wig the curls will go out, just try to curl a brown one it would be easier
>>8975007
It doesn't matter what the seller claims. You can file a PayPal claim under Item Not Received and WIN because the seller will fail to provide a tracking number.
Now, whether or not you'll be blacklisted by the seller and banned from ever buying from them again is another story.
>>8975012
Look for a cotton/spandex blend fabric or a polyester that is thick? It might fall under names like interlock, ponte, or "athletic", but it will depend on the manufacturer. I personally want to try jumbo matte spandex from Cosplay Fabrics just to see how it goes. Their regular spandex line is too thin for Saitama as attested by people who bought the fabric and tried to make a suit out of it.
Poplin w/spandex blends and twill will generally be too stiff or thin to work properly.
>>8974271
For the bracelets you can use car shrink wrap over thicker foam. For the beads you have to find or make them.
http://kaypikefashion.deviantart.com/art/Cosplay-Metallics-SOLVED-FOREVER-464151191
>>8975007
it would be an extremely dick move but nothing would technically stop you
>>8974331
the whole outfit looks like a history clusterfuck, I guess your heat-foam idea would work with the belts. for the greaves just do long boots (skintight boot tutorial with shit attached to it maybe?) with the knee parts added to it.
>>8973973
as others have said, armsocks and tights plus bodypaint. should be pretty easy to make the neckline work with the cape/hood but please wear a tank top of some sort under that cape
>>8975016
try underwear meant to go under body tight dresses/skirts, that has no seams.
Any place I can find a wig that looks similar to this hair style? I'm not good at styling wigs myself, so I can't just buy a long one and make it look like it.
heyo, I'm just curious, but is there a product that makes all of my hair the same color? like blends it together? i have natural highlights/lowlights and I don't really like them.
>>8975223
yes its called hair dye
>>8975016
Bike shoes on a bitch and a half to walk in
>>8974994
looks like her armor is made of leather, hence the stitching
>>8975246
I figured there was a particular product. I don't want to change my natural medium hair color, just get rid of the bright strips and dark strips so it's all the same, but I guess dye is the only option?
So I'm looking to replace the undersuit of a Kamen Rider Kabuto suit I got with something more comfortable. The current suit is made of pleather which i don't like the feel even though I have under armor on when i use it. Any suggestions on what fabrics I should look for? It has to be durable so the chestplate does not rip it.
>>8975247
My plan was to take off the clips for most/all of the day.
>>8975102
This will help me a lot, thanks for the suggestions!
Is it okay to order from Cosplayfu?
I know that if I buy everything I'm a major pleb, and the site seems kinda expensive, but I'd get everything at once, and they seem to offer free shipping to everywhere.
Skinnyfat fag here.
What can I do to bind my belly fat for cosplay? I tried one of those spandex slimming garments but they don't have much effect.
Would wearing a corset underneath work?
>>8976328
>>>/fit/17018018
Believe in the me that believes in you
>>8976338
I am working on dieting/exercise, but that isn't going to help in the short term for cons coming up soon.
>>8976341
Your problem isn't just that you're chubby, it's also that you have no chest and wide hips. No amount of strapping your guts down is gonna make it look good. I think you're hosed for this season senpai.
pls obtain pissening bench numbers
Anyone ever had your mom or other female relative try to get into lolita?
The other day I caught my mom searching on eBay for lolita dresses and I gently guided her to MLD since it's easy to use. I thought she was going to buy me a dress for my birthday or something but then my brother told me that she told him that she wanted to start wearing the fashion because it was so cute and it could be something we do together.
I'm not sure how I feel about this. I don't know if I want to bring her to meet ups with me but we could at least dress up to go out and be cute together. I think it would be kind of weird to bring your mom to hangout with other 20-something year olds.
>>8976328
Underworks.com. If they don't slim you, seek help because your fat is made of concrete.
Trying to cut off the heels of a pair of shoes, and I hit a long metal nail going down through the plastic. Is there a way I can cut/file/remove the nail without tearing apart the whole shoe?
>>8976383
I want to rub my face against Mutsu's abs
>>8976628
hacksaw/file/oscillating tool/dremel
whatever dad has handy in his toolbox
cut til flush, sand as needed
>>8976631
who doesn't
god damn
>>8976634
Which dremel bit is good for this? none of mine did much of anything, unfortunately.
>>8976641
Oh shit senpai
If that was a hardened nail you just broke all your bits
use a zip next next time senpai
>>8976651
Thanks, anon!
This is my first time cosplaying out of state.
Does anyone have tips on getting your costume over there?
Do you mail it, or take it with on the plane?
>>8976803
deets. Why wouldn't you take it one the plane
>>8976806
Because it's (EVA foam) armor and can't stuff it on as a carry on.
>>8975203
you may want to mildly shrink it for the sake of reality. Google fu is failing me, but there are several longer length wigs that are white/blonde in color that will work here.
>>8975378
sounds like you'll want to add a layer of backing to the chestplate itself. Something softer like maybe foam or some kind of fabric.
>>8976811
get there a day or 2 early and make the props from scratch there... or dissassemble costume into pieces that can be reassembled on arrival. As far as actual props such as metal replica weapons, don't bother even trying to take them on planes, you're just asking for headaches.
I've not personally dabbled with flying, but if you can make most of the pieces and keep them in small, packageable pieces, you should have minimal problems with reassembly once you're at your destination. Just leave a bit of extra time because you could have complications.
Alternatively, stay local.
What's the best material for the gold parts? Worbla is pretty cheap, but I read you have to sand it a lot for it to be pretty. I need it to be very shiny and plastic-like.
>>8976929
you could try black worbla or thibra?
a coat of plastidip might also help get that smooth effect
>>8976929
Gold metallic vinyl over Wonderflex.
does anyone know of any stores that sell any styles like the lockshop mermaid with the skin top? i love this style but i don't want to give them my money seeing as their quality is all over the place.
>>8976578
>Goes over the balls
These things aren't going to strangle my nuts, are they?
>>8976936
Is the black worbla easier to work with than Worbla?
Related to the horns question at the start of the thread.
I'm making a skaven grey seer cosplay (pic related), and managed to bag a pair of actual curled ram horns. Question, how do I attach them to the head? They're hollow, but still have some weight to them, so I can't just glue them to a headband or the head itself.
Thinking of maybe drilling holes in the ends, putting a metal rod with nuts in to secure them, then putting the base inside the head so the horns jut out. But I still can't figure out how to attach them to my head, as they're too heavy to just hang out the back of the mask.
Any ideas?
