Hey /wsr/, recently I got a hyper 212 evo, and decided to install

Thread replies: 10
Thread images: 2

Anonymous
2016-01-15 22:35:32 Post No. 33383
[Report] Image search: [Google]

File: stock-photo-old-man-working-on-the-laptop-computer-smoking-pipe-2377310.jpg (38 KB, 450x321) Image search: [Google]

38 KB, 450x321

Anonymous 2016-01-15 22:35:32 Post No. 33383 [Report]

Hey /wsr/, recently I got a hyper 212 evo, and decided to install it. Upon discovering that it required me to take out the motherboard, I figured i'd re-wire my PC for better cable management(It was awful the first time I built it.) So I disconnected everything, took all my components out, and re-wired my PC. hooked everything back up. and started it up.

Lo and behold, it started up, but once it got to the windows login screen, it froze up, and lagged like crazy. Took me about a minute to type in my password, took a minute to log in, took a minute for the desktop to load. Mouse was borderline unresponsive, eventually it would crash. All the while the screen was flickering on and off. Sometimes it'd boot up for it to crash right after the login screen. Now if I run it in safe mode, it runs just fine. No issues. Is it a driver/service issue? hardware? any help would be appreciated. Thanks.

>>

Anonymous 2016-01-15 22:41:44 Post No.33389
[Report]

Anonymous 2016-01-15 22:41:44 Post No.33389 [Report]

1. Did you seat the heatsink properly?
2. Are you using aftermarket thermal paste?
3. You removed the old thermal paste before applying any new paste?

>>

Anonymous 2016-01-15 22:42:55 Post No.33391
[Report]

Anonymous 2016-01-15 22:42:55 Post No.33391 [Report]

Enter BIOS, look at CPU temperature.

Does it run away?

If yes, reseat heatsink.

>>

Anonymous 2016-01-15 22:44:44 Post No.33392
[Report]

Anonymous 2016-01-15 22:44:44 Post No.33392 [Report]

>>33389
>>33391
I checked both of these, because I first thought it was overheating, but CPU temps are nominal.

>>

Anonymous 2016-01-15 22:50:24 Post No.33395
[Report]

Anonymous 2016-01-15 22:50:24 Post No.33395 [Report]

>>33392
God knows then.

Take everything apart.
Swear at everything.
Put it back together.

>>

Anonymous 2016-01-15 22:54:20 Post No.33398
[Report]

Anonymous 2016-01-15 22:54:20 Post No.33398 [Report]

>>33395
What truly baffles me is that nothing's changed. all I did was take it apart and put it back together, and it runs fine in safe mode. I tried restoring back to a different config, but that didn't work. Should I just re-install the OS?

>>

Anonymous 2016-01-15 23:01:46 Post No.33405
[Report] Image search: [Google]

Anonymous 2016-01-15 23:01:46 Post No.33405 [Report]

File: fghfghfgh.webm (459 KB, 360x360) Image search: [Google]

459 KB, 360x360

>>33383
haEv yuo treiD blaStinG it wif PISS????

Seriously though, Try a clean boot and enable services one by one and see if anything is fishy, alternatively; try resetting bios to default settings.

>>

Anonymous 2016-01-15 23:10:25 Post No.33412
[Report]

Anonymous 2016-01-15 23:10:25 Post No.33412 [Report]

>>33398
Possibly.

Run a lap of memtest86 first.

>>

Anonymous 2016-01-15 23:11:04 Post No.33413
[Report]

Anonymous 2016-01-15 23:11:04 Post No.33413 [Report]

>>33405
It'll take a while, but I'll try that
>>33412
Is that that thing from the F8 boot menu? Because I tried that and no problems were detected.

>>

Anonymous 2016-01-15 23:20:50 Post No.33422
[Report]

Anonymous 2016-01-15 23:20:50 Post No.33422 [Report]

>>33413
I also forgot to mention that I tried a diagnostic startup boot and it didn't detect any issues