Bitchin' Sweet Rides Edition
Last thread >>45948385
>Citadel Painting Guides:
https://www.mediafire.com/folder/drb4mezm6792i/not_citadel_nothing_to_see_here
>Painting guides, Uniforms & Heraldry books, Painting Videos, Visions, ebooks and White Dwarves:
https://mega.co.nz/#F!OgpwzAKS!a5eVE6pOagTTOWEr5tEaEQ
>Painting Videos only
https://mega.co.nz/#F!XEJSFDCL!9ZZKiLi6M_wguI1uTpyjPg
https://mega.co.nz/#F!WUsUlSLb!556OumKLhusFd9Fw5dBMdA
>DIY Lightbox
https://www.youtube.com/watch?v=OyxzC5kqbyw
>How to Moldlines
https://www.youtube.com/watch?v=A4LZ8iCSkeU
>Fuckin Magnets how do they work?
http://www.bolterandchainsword.com/topic/297605-tutorial-magnetisation/
Super glue or plastic solvent, which one do you prefer?
>>45986523
Plastic cement for plastic on plastic, super glue for everything else. It's that simple.
>>45986428https://mega.nz/#F!h8wwnY7B!v3V8yO2gSe4cZ56x30hWlw
Care and share.
>>45986652
Shit, I forgot that was in the last thread. Thanks for adding it, anon.
>>45986671
>Thanks for adding it, anon.I just want more of this stuff, wasnt working in the last thread though:^)
Starting my Thousand Sons Predator
Got nothing new to post, so here are my fancy marines again, in the progress of being base layered. All opinions are welcome, as usual.
>>45986742
>those turret magnets
Im glad Im not the only one, feels like shit but it works.
Reposting
So I got two Necron HQs yesterday to lead my army and both were a fair bit warped and had more flash between them than the entirety of the models I assembled already.
A player at my LGS told me to dip the bits in hot water and straighten them out by hand.
It worked for the most part but the arms don't really meet the elbow joins well.
For Obyrn, the one on the right, his weapon flexs a bit to match up with the socket.
Orikan, the one on the left is even more of a problem because he is almost hugging his staff and the slots are much more off.
Do I need to rebend the arms attached at the weapon of the bicep on the actual model.
I know the picture is absolute shit and I apologize but it is all my shit camera can do.
>>45986760
What purple are you using?
It looks just a bit lighter than my Naggroth Night and would probably be good for my edge highlights.
>my picture is the OP
Now I really have to do it.
I'll buy a separate prince because working with metal is a bitch, but this is happening.
>>45986851
It's Vallejo's Hexen Lichen. It's clearly a different tone then Naggaroth Night, can't tell if it's brighter though, might just be the lighting. I usually use Vallejo's Royal Purple for highlights on Hexen Lichen, it's really close to the latter an only a tad brighter. Might give that a shot.
Do the two bionic legs that come in the thunderwolf kit only fit the bodies they share a sprue with? So I can't buy extra ones to have them all with bionic front limbs (without a bunch of modifications)?
>>45986916
Someone asked how I did this. Metal is layered up to runefang steel, second is two layers of guilliman blue, third is waywatcher green layer, and fourth is one final layer of guilliman blue and then details. Takes a while but pretty easy.
>>45986949
Great, thanks!
Never used Vallejo. Currently sitting on ~30-40 tubs of Citadel paint.
>>45987025
Wow that is great. I am trying to make metalic blue Necrons.
>>45987025
I'm going to try this out and see if I can't start an Alpha Legion army, this is ace. How on Earth do you plan to do vehicles though?
>>45987025
And that's saved, great look for Alpha Legion
>>45987110
Trial and error until it comes out right. I have no vehicles to paint at the moment but when I get one and get around to painting it I'll post the process.
I've got an Orlock ganger who just got his hand on a Needle Pistol. I'm using a DE Stinger Pistol to represent it on tabletop, because real needle pistols are a pain to find.
Either way, was thinking of sculpting a hat for him like a stetson or slouch hat with Green Stuff. Anybody has any experience with that?
>>45987110
>How on Earth do you plan to do vehicles though?
This is what is worrying me for my Necrons metallic blue scheme. The Flat surfaces of the Ghost/Doom Arks arent going to come out as well. I was thinking about thinning a metalic with the blue glaze. Going to try it on a spur when it is nice enough out to prime.
>>45987256
you would have been better off posting whatever kind of hat you are talking about in the pic.
>>45986916
>>45985121
It's gonna be great!
>>45987256
>>45987256
Slouch on the left, Stetson on the right.
>>45986916
http://www.ebay.com/itm/WARHAMMER-40K-BITS-CHAOS-DAEMONS-BLOOD-THRONE-SKULL-CANNON-REAR-WHEEL-/371572777105?hash=item568376a091:g:GMcAAOSwYlJW4zYe
>>45986523
Superglue, I don't like that plastic cement melts the plastic.
>>45986916
Pick up a single marine or eldar bike
Eldar may actually be easier to modify with the throne bits and you get to skim. It is a smaller model so you can hide it under a ton of daemon good stuff while having a solid structure underneath.
Either would give you a core to build off of
>>45986819
Your first mistake was buying Finecast.
You're just going to have to keep rebending the resin until you get what you want, for what it's worth, Orikan is supposed to be hugging his staff pretty closely so don't worry about that.
>>45987352
>plastic cement melts the plastic.
This. My entire DA army is put together with GW Plastic Cement whatever and now that I am getting a bit more better at modeling/understanding I want to move around shoulderpads and magnetize stuff and it has been a bit of a pain. The shouderpads I remove take some of the shoulder with them and I had to try and scrape/file the stuff off to sit smoothly on a different shoulder. Then the shoulder is all bumpy and uneven and a new shoulderpad doesn't sit perfectly.
Apparently all you have to do with superglue is freeze the shit and it snaps off.
>open a box of CSM
>throw all parts together to get absolute random results
>put the assembled ones away
>still get 2 pair of almost identical looking and posing CSM
I hate myself
>>45987420
>freeze the shit and it snaps off.
Aye, I've done this countless times with pre-owned kits from Ebay. Slap them in a freezer, let sit for some hours, take out, snap apart. Sometimes, you're unlucky and break off a leg, neck or something, but it mostly works fine. Pry apart seams between arms and shoulder or waist with a scalpel.
Started painting the inside of my chimera before finishing gluing things together
I think I've improved since my last vehicle?
>>45987628
Don't be too neat. Modern military vehicles normally have a uniform look on the inside, and most stuff gets coated in anti rust paint.
So just take a big drybrush, brush the whole interior including the floor, and touch it up with a few smudges (especially the floor, shit gets carried in by troops embarking).
Also give it a thorough wash, let it run down the walls for a few streaks, dab off excess and tone down the floor a bit.
>>45987715
Thanks, I'll keep that in mind, also plan on having it pretty neat on the outside when I finish initially and gradually put damage on as I play more games
>>45987337
This is close enough.
http://handcannononline.com/blog/2012/08/01/a-beginners-guide-to-sculpting-part-ix-hats/
>>45987781
Good luck doing that for a lot of vehicles and keeping it up...
By the way, check out http://i110.photobucket.com/albums/n98/Hishambas/00BMP2Interior_zps866c2957.jpg
It's a good idea to use a bright interior paint, so shit doesn't get too dark with a tiny light source inside.
>>45987797
Thanks, I'll post progress after the exams.
Has anyone here used salt to achieve a rusted paint effect?
I remember reading a No Quarter that included a tutorial about base coating the metal parts orange, putting some salt over it, painting over the salt, and then running the model under cold water and removing the salt with a tooth brush to reveal the orange rust. I believe it was used on the studio Kraken.
I was considering trying this on some Nurgle models but dabbing the rust on with a bit of sponge sounds safer. Just curious if anyone has had success.
>>45988169
usually not worth the time on guys smaller than terminator size, I find
Salt masking/weathering is pretty well documented online though, so you'll have plenty of well done examples and tutorials to draw from.
>>45988169
In order to pull of the salt effect, everywhere I've read recommends having an airbrush and you apply a layer of non-aerosol hairspray before adding the salt, giving the model a thin varnish layer.
>>45988169
https://www.youtube.com/watch?v=-0EWdr6t8m0
>>45987025
Any highlighting before or after the process? Or is the shine enough?
>>45986523
Plastic. I just prefer how it operates. I've had so many superglued pieces break because the superglue is quite hard and doesn't have any give in it. All the plastic glued pieces I've broken have been because I just didn't glue them well enough.
>>45987420
>Then the shoulder is all bumpy and uneven and a new shoulderpad doesn't sit perfectly.
Except that as the plastic glue melts the contact areas, the uneven surface becomes less uneven.
I did promise to show my method about a week ago, so here it is.
and the dreadnought. Coverage on my blue's been a bit janky lately, so he's still got a way to go, despite almost being finished. Putting him aside for now to work on tacs for a change of pace.
>>45988827
Tacky, oldschool, 90s.
I love it.
Sigmarine assault termies
>>45988913
the legs look really out of place
>>45988913
legs are to thin compared to the body
>>45988940
>>45988949
Not that anon, but it's not the legs, it's the head.
With a head a tiny bit smaller this would look dope.
progress! worked on the grill and laid down the first hazard stripes
>>45988913
In the grim darkness of the far future there is no leg day.
>>45988860
I am playing with toy soldiers, after all.
It's hard having a backlog with all these nice deathwatch miniatures taunting me from their sprues.
>>45988985
>L O V I N G I T
>O
>V
>I
>N
>G
>I
>T
>>45988985
2nd Ed Never Dies / 10
>>45988913
Not bad, I like it.
Little question, are those legs bigger than the standard Stormcasts ones?
>>45988994
Nah, flairs just stopped being in fashion
Seriously though, they're slightly thinner in the shins, thicker in the thighs and longer overall so it makes them look really skinny
>>45988970
I'm actually with this guy, I think that Sigma-Termies should probably go bare headed.
>>45986771
fuckin sik
PURPLE WORM, PURPLE WORM~
>>45988913
legs look fine, it's sick
>>45989586
Green daemon of jealousy for scale.
>>45989614
thicc
>>45989614
>want to start painting it since players might encounter purple worm soon
>want to start out by spraying it black
>local temp is below zero
>>45989639
Dude is green because he just knows he can't compete with dat girth.
>>45989742
Or because he knows that he can't get a skull out of that fucker.
>>45987025
This is brilliant and I love you. Been frozen with indecision on how to do my new Alphas for a month. This is perfect.
>>45989586
>>45989614
>>45989672
Im pretty sure that started as some weird sex toy project.
>>45989411
They're the legs from the paladin box
>>45989483
Bare head vs helmet
>>45989784
>>45989836
It looks... better.
Still a bit weird but Im sure you can pull that off
>>45989841
Holy shit, our consciences were twin linked there for a while, anon.
>>45989836
Bare head looks badass.
>>45989836
Yeah I know what legs they are, but since I never had paladins, I don't know if these are bigger than the Liberators ones.
>>45989836
No helmet is a strong look on these guys, esp as they're BAs.
I'd go with that, but I ain't you.
>>45989834
You're almost right. I think roughly half its weight is nothing buthot glue.Literal hot glue, though.
>>45989878
Oglaf does that to people.
>>45989873
Here's one I prepared earlier
>>45989891
About the same size, just more plating
okay so i managed to put some wash on and put the fancy little thing on the back to make it a bit less bland i guess
hope i didnt ruin it
also i really need to take better pictures
>>45989947
Is this supposed to be tyranid like or just a giant worm?which reminds me of this jedi academy mission
>>45990045
Ah now I know whats weird, the legs are missing purity seals and stuff, they are to bland compared to the torso.
Imo.
>>45989836
Bare head looks fine, but how about slightly smaller helmet?
>>45988913
In the grim darkness of far future, even the super soldiers skip leg day.
>>45989148
>>45989364
thnx anons!
>>45990045
i like that, keep going anon
Warhammer Troll, first bigger model that I have painted.
>>45989834
>>45989947
For anyone else who wants to make something similar, this guide is really good: https://www.youtube.com/watch?v=mzLSXMgzWpk
Reversed the scales though. The ones in the video would be extremely painful for such a big guy moving through the earth.
>>45990097
>Is this supposed to be tyranid like or just a giant worm?
Only noticed that it was tyranid-esque after I attached the carapace, actually. But hey, I already established that tarrasques look vaguely like tyranids in my campaign, so why not purple worms as well?
>>45986771
Sweet. Completely different from what I did with my steam dorfs, but it's REALLY great so far.
>>45990097
I think you might be right about the lack of ornamentation on the legs, I'll raid the bits box and report back
>>45990179
holy shit from this thumbnail >>45986771 I thought thats only the leg of the dwarf what the fuck
>>45990045
Maybe put some more gold on the legs?
You have rims already sculpted, why not take advantage of it?
>>45990105
Wow my headless termis and DW knights are finally getting a helm.
>>45990284
I tried that initially, but they looked to khornate to me
>>45988783
Haven't seen your stuff before and a rough week is a bit far too look for it in the archive. Is the method base, wash, layer 1, layer 2, wash? I really like it and would like to give it a shot.
>>45990251
Yeah, those steam armour dorfs have differently long legs on their minis. As far as I can tell the characters like sergeants or football team leaders are supposed to tower over the other dorfs. The normal steam dorfs are really big already, pretty close to standard space marine height, if I remember right. And since I use them as marines in terminator armour, it works good for me.
>>45990179
Nice to see there are others who appreciate Scibor's dorfs
>>45990450
close
base, wash, highlight 1 (base+white mix), highlight 2 (watered down white), blend/clean up highlignts with base
I made up a couple similar guides for the paint threads back in2012
>>45990587
I love 'em. My only problem is that some of them miss the sideburns and/or mustaches in their beards, but that's nothing that green stuff can't fix.
>>45988913
Did you shave off part of the torso? I'm trying to do similar and it looks off.
>>459906862012 is a bit before my time here.
I do recognise that terminator though, thanks for clearing that up.
>>45991009
no problemo
Reason why I use straight paint at the last step instead of a wash is because you have more control over where it goes and how much pigment you're using.
so i painted this now because i realized i would have to put those little gun things in and painting it afterwards i would have to repaint the guns afterwards
hope that it didnt come out that bad, i'll post what it looks like together after i do that in a bit
If I can see paint strokes on flat surfaces, I'm guessing I have to thin my paints?
>>45991670
Yup
Put some purity seals on the legs, GK style helmet and a vanilla termie for scale
>>45990868
Nah, I use normal termie torsos and cut down the waist on the paladin legs to fit
>>45991808
Helmet is still to tall.
The eye sockets only work for the dog like standard terminator snout helmet, if you cut the snout you must readjust the chin, or the eyes seem to be at the forehead.
first raider finished. ran out of dullcote though
What skin-color would you give a Black Legion CSM? Normal skin color or pale?
Found this FW head in my bitz box and wanted to make a CSM similiar to the DV box.
>>45991808
Yeah, the purity seal 's fine, preferred the helmetless version, though.
>>45991924
Good job on the sail anon. I think a layer of a thinned down purple glaze would really bring it together.
>>45992099
Paler skin is a good extreme contrast for black legion.
>>45988985
You're doing gods work anon, thank you.
>>45991924
looks pretty sick, always enjoyed the DE aesthetic and glass canon is my second favorite concept after fast and dangerous in your face reckless close combat brutes, you pull how I imagine DE to be perfectly
>>45988827
Would serve in death with/10
>>45991924
Nice collection, and I love the guy hanging off the side.
Whatcha drinkin'?
Comparison between my chimera and my old-ish basilisk
I feel like I've made a lot of improvement since then
https://www.youtube.com/watch?v=YyDqgPPoeEc
He's doing the kan kan.
>>45991808
I like it, that termie looks so tiny in comparison.
>>45991808
Dude adding things etc will not help, the body parts are different scales, that's why the ankle to knee length is monumental in comparison.
It was a cool idea but it's time to stop
>>45991924
>DE player
>Plasti-Zap
>eraser in a jar
>brown liquor on table
>dice cube mingling with hobby supplies
What the hell is going on over there anon?
>slow progress on GUO.
>>45991808
It looks great, I really want to see them painted.
>>45992538
You still use a shitton of glue.
Any maybe you should assemble the model a bit more and then prime it.
And why are the lasguns aiming into the sky?
Dedicated AA?
>>45992979
i put them straight up so i can put the treads on later, i can still mess around where they point
>>45992214
>>45992406
Thanks! definitely not totally thrilled with the sail, hope to take the lessons on to the next one.
>>45992460
>>45992787
"JD Revelry" some batch bourbon that was on sale at the packie. Tasty enough.
Really liking the "watermelon" look on that guo
>>45992373
thank You anon!
>>45992770
It's too late to stop now, but thank you for your concern
>>45990069
Salamander???
>>45993348
nah, just decided to make the inside of my first chimera look nice
Is it possible to respray an already painted model or will it swallow all the detail?
>>45993450
strip first, but follow a tutorial so you don't use something that eats whatever your mini is made of.
>>45993474
>>45993450
>>45993132
>Urban dictionary search Packie
>Pleasant surprise when it's a totally different slang term to the one I thought you were using
>>45993548
>>45993474
Maybe I'll try that, thanks
Anyone know a good tutorial on doing space ship deck bases? I want to rebase my Iron Warriors and Imperial Fists as fighting during the battle of Phall.
>>45993744
Are you looking for something more exciting than just diamondplate plasticard?
>>45993548
If you're in the U.S. - try 'CSC' (Castrol Super Clean) - found in the automotive section in many stores. It's used to degrease engine parts, but does a fine job of stripping paint off of metal, plastic, and resin minis without damaging the minis.
Anyone have suggestions for ships that would fit, wrecked, on a table?
Was discussing with my friend a fun one shot game mode. Based off of the last episode of S1 of the OLD Clone Wars cartoon. Surrounded on all sides, few left, gotta kill something bad or wait til the other player pushes through the blockade.
But all these spaceships are 'lel fukhueg battle chapel in space, 2big5me cant comprehend.' Even if its half of one, just need a fluffy ship to make a carcass of. Help please
>>45994101
Look for the crashed lander from the battle for macragge box set on Ebay?
>>45992588
blurry af picture f@m but looks good from what I can tell
>>45993744
Get some of the small sized plastic cross stitch sheets, flat plasticard, and diamond plate plasticard.
https://tinyplasticspacemen.wordpress.com/2014/06/23/starship-bases/
>>45990686
Bold and clean. Looks like he has a Charlie Chaplin mustache though.
>>45994147
Im looking to actually make a whole board setting for this, but thank you. It needs to be able to fit small/medium units in it, but still have most of the hull intact for cover
>>45994049
Was looking at something like this: http://i17.photobucket.com/albums/b98/Corai/IF7_zpsecd19122.jpg but since I didn't know what diamondplate plasticard was, that is already a huge help. Thank you!
>>45994264
Perfect! This was exactly what I'm looking for, thank you so much.
>trying a new painting technique
>mess up a little
>actually like how it came out
>have no idea how to replicate it
just kill me desu
>>45991924
Looking pretty sick, the blending on the sail could be a bit better but aside from that it looks awesome (so does the rest of the army in the background).
>>45994101
Something like this, for any anons that havent seen the old '03 version of Clone Wars
>>45987021
yeah they're for specific wolves, it will require some fidgeting to get it right, I've been having trouble with the exact same thing for a while now.
>>45994680
Intact escort ships start at 750m long...
http://wh40k.lexicanum.com/wiki/Imperial_Navy#Vessels
Build some of the imperial scenery into really narrow, ship interior portions, clad the windows with plasticard and stuff, really tear up the edges so it looks broken off.
Build a big naval prow section out of plasticard to make it distinctive?
Wrecked Thunderhawk would cost so much it's not even funny, and looks a bit smaller than you want.
Shark assault boat?
http://wh40k.lexicanum.com/wiki/Shark_Assault_Boat
Hey WIP, how can I resize my photos before i post? I've tried cropping them and it doesnt seem to work. BTW its from my phone if that helps.
>>45994920
Oh i was definitely wanting to do a huge, ornate prow at one edge. The whole ship will be a basic funnel, go too far back and you get a chokepoint, but your escape vehicle will not be able to get right to you. Thinking of subbing Necrons for the battle droids, and having them fight a modded Necron HQ as the sub for Grievous
>>45994871
Eh, I'll just have to get 3 of those with all their paws on the ground (for stability), get all the techy bits for them and try to make them look at least a bit different from one another.
>>45995150
By cropping them you'll lose some weight, that is simple maths.
The otherway to do it is to mess around in your camera settings, to go from a bajillion pixels to a respectable amount. Mine was simple to see, I went from 4k×something, to less than half that.
Then you can just go back to normal settings when you're done shooting your models.
>tfw don't know how to paint red so it turns orange instead
Can anyone guess how this darker blue was painted? It looks a lot like citadel Dark Reaper.
>>45995507
In the same way that over-highlighting black means you've just painted grey, over-highlighting red turns it orange.
If you're going to layer like that rather than edging, try
A) Toning down your highlights with a glaze
B) Darker shade layer- mix your base red with brown.
>>45991808
Fuck the haters, I wish I could rip the legs off of all my Deathwing right now and get these cool armoured looking one.
Dark Angels are a real medieval themed army and your dude is putting my DW Knights to shame.
Can anyone tell me how tall a Skitarii walker is? The jousting, shooty one
not the Onager
>>45986771
What model is that? Is it warma?
Working on a knightly themed chaos lord. Unsure of which pose to go for so just blu tack things in place.
Which looks better?
>>45994537
Buy a Thunderhawk and use it as wreckage.
>>45994634
this literally happened to me painting ork skin earlier
REEEEEEEEEEE
>>45995519
I've gotta get my unpainted infinity figures back from my friend. those make me want to paint them again
>>45996391
First one. The second would work if the sword arm was extended fully to a strike, but that looks more like he's in a guard position, and that's not a very Chaos lordy of him.
>>45995507
im kinda digging it, even if its not on purpose.
>>45995212
http://www.ironhands.com/daunt.htm
Was trying to find more pics of some crashed ship terrain form 90's White Dwarf (pictured), found this instead. So you could totally do something like a Frigate if you want even bigger
>>45996805
That's awesome, almost perfect. Probably going to make it in grids then donate it to my LGS, but it will be bigger than that. Thank you!
How primed is too primed? I'm brand new to this, and I was watching a series of videos on how to paint minis. In his priming video, he showed the mini completely covered, unable to see any plastic at all. I saw another video though that called that overpriming. He stated that you should be able to see specks of plastic through the primer. A comment on his video cited the fact that woodwork and other crafts do this for primers as well, so it made sense.
I want to ask you guys though, how much primer is overpriming? Is that speckled idea really shitty? Either way, can you explain why?
>>45996391
The pistol-glove looks weird on the left one, especially if you consider the direction the gun is pointing when he is not aiming, right one looks fine, but only if you put him toe to toe with an enemy.
>>45996805
I have that one, but in green. Man, 1997 is long gone ...
>>45997245
Ideally you want a completely covering coat without clogging the details. Primer does contract a little as it dries so sometimes what might looked slightly overprimed after spraying will be fine once it dries. Still, you basically want to apply as little primer as possible to get as much of a complete coat as possible.
And yes, speckled is bad. It means parts of the model are unprimed so paint won't adhere as well to it. Honestly though, if you're sealing 'em up with varnish afterwards it won't really hurt.
Still has a ways to go before I'd call it done, need to redo the checks on the shoulder pad, looks shit.
>>45993548
Dettol works a bloody treat, can be expensive. I'd be suggesting just normal luke warm water with detergent in it to wash your figures in after a dettol bath. Metho has ruined the detail on a few of my marines
>>45987209
SO I had the same problem with my vehicles, I used nuln oil to darken my models, but it looked blotchey on my vehicles. Here is how I solved it.
Take desired ink, get a secondary container. Now I did this much but you dont have to. Add the whole pot in (this was back when they were small) and 2 pots of lahimian medium to dilute it without using water.
Then I coated the vehicles with 2 coats of testors dull coat and let that dry. Then put ink over it. With a large brush do areas, then with a clean brush soak up any excess ink. Looks good.
>>45994634
there is a reason no two of these have the same result on the wings. And it's not because I wanted them all to look unique.
>>45998132
You want to break the surface tension to prevent pooling. Flow aid/flow release is the main way to do so. You can also use dish washing liquid but be more careful with it.
>>45992787
Why haven't you removed the flash around his toes?
>>45997263
If i do that pose the pistol will be cut off. I just tacked it their to figure things out before cutting.
For my Orks, I'm going to make one more Gunwagon/Trukk.
This one is going to be themed to be the Danger Cart from ATHF, but pulled by a Mangler Squig instead of Meatwad.
What is a good 2-wheeled cart that I can use as a basis for the Danger Cart to loot?
>>46001233
And the Danger Cart that I forgot to attach a picture of.
>>45994686
get gud at cardboard
>>46001233
I love the idea. But an Ork Carl in a looted 2 Wycked is now something i need to make. Sorry, Tau Backlog
>>45995507
I so want to see these when they're completed. The start already has me drooling for more.
Been working on repainting my x-wing fleet like this. White is extremely unforgiving...
Need suggestions for the decimator's scheme, and what to do about the intakes on the rear of my TIEs. Because as the next image shows, I'm a bit stuck with the current baboon ass.
>>46001930
As promised: baboon ass.
>>46001422
Looks exactly like the things around some of the walkways at Southbank QLD.
Looking for a specific kind of shield. Don't have a pic sadly, just a description.
A dude at my FLGS had his Crusaders as some kind of conversion from fantasy units. Bretonnia, I think he said. Anyways, they had these awesome shields that were four sided, almost squarish but with soft edges and a mildly tapered tip. Another anon in the WIP thread a few days ago had them on his Terminators. Anyone have any idea where they came from?
>>46002155
You're not just thinking of storm shields are you?
>>46002245
No, they were way smaller than those.
>>46002155
Can you do a drawing of the rough shape, might make it easier to find
>>46002155
man-at-arms shields?
>>46002367
Kinda like this.
>>46002368
No. See >>46002571
>>46002471
This?
>>46002471
Just looks like a plain heater shield to me.
>>46002501
similar shape but way smaller and there wasn't really any design on them.
>>46002489
those are classic 4th/5th edition empire/bret shields
you can find similar ones in the knightly order kit, though they have details on them
>>46002517
>>46002616
That one on the far right looks exactly like it. Thank you.
I need help, lads. I'm new to the 40K and I want my first army to be Chaos Demons.
I intend for the core of my army to be the Infernal Tetrad, which is one of each flavor of Daemon Prince.
It looks like there's literally only one model of Daemon Prince though. And he looks like a Khorne worshipper. Are there good substitutions for Tzeentch, Nurgle and Slaanesh? I don't want to just buy 4 Daemon Prince models and paint one blue, one green, one red and one pink.
>>46001957
A shot of my developing decimator. Gonna need a lot of cleanup when I'm done. I'm thinking a thick black line in the middle of that white gap. Then some null oil wash along the crevices and machinery.
>>46002744
Forgot the picture of course.
>>46002718
There's a couple old ones for 40k that are internet only:
https://www.games-workshop.com/en-US/Chaos-Space-Marines-Daemon-Prince
https://www.games-workshop.com/en-US/Chaos-Space-Marines-Nurgle-Daemon-Prince
>>46002823
Whoa, these are fucking cool. Thanks.
Sadly the first one also is very Khorne-esque. I have a feeling I'm gonna have the biggest problem with the birdman. Tzeentch is so cool. I wanna do him justice.
Definitely gonna get the Nurgle one though.
>>46002718
https://www.games-workshop.com/en-GB/Chaos-Daemons-Keeper-of-Secrets-40k
https://www.games-workshop.com/en-GB/Chaos-Daemons-Lord-of-Change
https://www.games-workshop.com/en-GB/Chaos-Daemons-Great-Unclean-One
Anything wrong with fielding these guys as daemon princes?
>>46002886
ask
>>46002729It depends on your own playgroup
>>46002718
Try googling "demon miniature" or something along those lines, there's tons of miniature manufacturers that might have something you can use as a base and convert a bit.
>>46002845
>I have a feeling I'm gonna have the biggest problem with the birdman
Doesn't really have to have avian features, looking like a sorcerer with a magic doohickeys and runes and stuff will work fine.
>>46002886
Might cause some confusion, since they're very much specific other units. Most people make total custom Daemon Princes rather than just sub in existing troops.
>>46002886
Either way, he's now down to Tzeentch and Slaanesh.
There's also https://www.games-workshop.com/en-GB/Be-lakor-Daemon-Prince-2016 as another base model for any conversions.
Idk the current daemons too well, so I'm not sure what his restrictions are re: what he needs to be WYSIWYGing on the Tetrad.
>>46002845
The gaunt summoner could make a decent tzeentch prince.
>>46001977
I was just thinking that! Just needs like 30 Ibis's around it
>>46002957
There's actually a 4th Daemon prince on the store as well https://www.games-workshop.com/en-US/Daemon-Prince-2016
>>46002718
This guy could work as a Tzeentch prince. Just use the helmed head and sword, then paint him in blues and purples with some pink highlights.
http://www.ragingheroes.com/collections/fantasy/products/kahn-urkan-lord-of-shadows-heroic-version
>>46001918
Here's a preview, probably not going to be remotely as good as these guys since these took 5 days to paint and those took 5 hours
>>45995507
>Chaos Space Magmarines
For anyone interested, here's a size comparison between a battlewagon and a puppetswar warbus
>>46003545
Normally I'm not a fan of CSM models, but they look damn nice
Any good tutorials for sculpting fire/flames? I friend of mine wants to commission a flaming Prince of Tzeentch from me, but I'm pretty shit at sculpting. Tips would help...
>>45995507
I'd say a red glaze or wash over the top would probably sort that out while keeping most of the blended effect.
anyone have any good guides for painting brighter oranges? i've been trying to layer troll slayer orange over jokaero orange and its only led to pain and suffering
>>45993548
Those methods take so long and require so much work after.
Just go down to a hardware store and by a can of paint stripper, takes 2 minutes, literally disolves everything plastic, superglue all the paint, and then you wash it off in water and prime it again after drying.
Detol is also quite toxic for humans don't breath that shit even if it has great ventilation.
>>46004182
>literally disolves ... plastic
This is why those methods exist. Some people want their nice plastic models to not come out of the paint stripper looking like the Wicked Witch of the West post-Dorothy.
>>46002758
Redstripe, its beer. Hurrah beer!
>>46004087
I could see that warbus being used as public transportation, orks having to deposit teef as they get on, all of them on their way to waagh.
Soo much burning and purging to be done. But first more cleaning of mold lines, base coating, and painting.
>>45986428
My first NL squad. I intend to have all the traitor legions represented. Still got two raptors to go. How'd I do?
>>46001233
Fantays probably has several chariots that would work.
>>46004430
purple bases are gross
otherwise I love them
>>45997934
I think technically they look okay anon, i'd just make them bigger next time.
>>45987256
new genestealers have needle pistols, try ebay
>>46004669
I'm okay with this, because eventually only the rim will be purple. I just haven't made up my mind on a basing scheme.
>>46004780
PURPLE LAVA
>>46004833
Well, I guess I'm now purple base anon.
>>46004937
Eye of terror. Purple mud with neon pink & green flora.
>>46004182
fine
>>45996369
One of sciborg dwarves. It's from the football range, but there is absolutely nothing football related in the miniature so it can be used as a fantasy miniature.
>>46004182
Detol is toxic.... to cats. It smells of pine. Admittedly, it will play a number on your skin if you don't wash your hands or if you use it a lot but... this is a substance used as a disinfectant in kitchens and hospitals. I've never known anyone suffer from breathing its fumes.... unless they were REALLY overdoing it.... or were a cat.
>>46005286
I'll also add that I've known diluted detol be used on scrapes and cuts when I was a kid... it's hardly Nitromorz*.
*old-style Nitromorz will fuck up your lungs, your skin and your eyes. New version isn't as bad.... but it's not as good either.
>>46005254
the reason no one does this is because it sounds too good to be true. I did a whole army with the dettol method, and will never do that again.
>>45998254
Give me your color scheme.
I will consume it.
>>46005519
Why? I used dettol several times and it was fine.
>>46005536
It just takes fucking ages I did like 2500 points in over a few days. I mean it works and all, no real complaints other than labour involved.
![720x405-Otto_Disc[1].png](https://i.imgur.com/LG1qSDb.png "720x405-Otto_Disc[1].png")
>>46004087
Things I didn't know I needed: Otto Mann ork driving DA WAAAGH BUS!
>>46005551
>It just takes fucking ages
Ultra Sonic cleaner, you need to place the models on top of the ... whatever emits those waves.
Destroys hardened liquid greenstuff though
>>46005580
>Get on board, little grots! Da WAAAGH Bus ain't got no brakes!
>>46005589
>Ultra Sonic cleaner
I just googled that. Seems interesting. If I ever got one it would have to accommodate a land raider. So probably exy as fuck.
>>46005643
Like, it CAME with brakes, but we ripped them out and put more fuel there.
>>46005651
This one cost me... 50€ I think? Put a towel under it though and like I said, the real deal 's only right above those emitters.
>>46005743
Food for thought.
>>46005737
>And speakers so we can WAAGH louder
Finished my BaC Contemptor.
>alright, time to stop being lazy, lets paint this hive tyrant!
>hive tyrant gone
JESUS FUCKING CHRIST WHY
I finished up the sides last night and am currently wondering what weapons to put on this
>>46006084
I hate it when wip projects flee.
>>46006171
I must have left him at my old apartment, FUCK
>>46006171
>>46006306
no wait, I found the 2 heads, where the fuck is the rest
>>46006334
This makes me want to into chinaman
>>46006334
Half of those seem like what you get with Finecast desu.
>>46006697
That´s the joke I think.
