[Boards: 3 / a / aco / adv / an / asp / b / biz / c / cgl / ck / cm / co / d / diy / e / fa / fit / g / gd / gif / h / hc / his / hm / hr / i / ic / int / jp / k / lgbt / lit / m / mlp / mu / n / news / o / out / p / po / pol / qa / r / r9k / s / s4s / sci / soc / sp / t / tg / toy / trash / trv / tv / u / v / vg / vp / vr / w / wg / wsg / wsr / x / y ] [Home]
4chanarchives logo
/k/s friendly reminder that building AR15s isn't hard and
Images are sometimes not shown due to bandwidth/network limitations. Refreshing the page usually helps.

You are currently reading a thread in /pol/ - Politically Incorrect

Thread replies: 21
Thread images: 8
File: image.png (266 KB, 1868x1280) Image search: [Google]
image.png
266 KB, 1868x1280
/k/s friendly reminder that building AR15s isn't hard and now is the time to do it.

Read this, ask questions.
>>
>>80454960
Can I buy these parts at a gun store? I would like to inspect the pieces myself before buying anything (even if I don't really know what I'm doing). Also, is pre-built really that bad? If I had say 1500 to chuck at an AR could I get a good one?
>>
>>80455469
Bud, you could build yourself a fine ar for just 600$. You can also buy a good ar for 600$.
Check out some gun shops in your area
>>
>>80454960
There is literally no reason to "build" your first AR 15. You can get a fully assembled one for $500 or less these days.

http://www.webyshops.com/Department/Firearms-dept/ANDERSON-AM15-Optic-Ready-Non-RF85-Rifle-5-56-16in-Barrel-1-8-Twist-30-Rd-76874.html
>>
File: S&W M&P Sport II.jpg (68 KB, 600x600) Image search: [Google]
S&W M&P Sport II.jpg
68 KB, 600x600
Bumping for interest. This is a highly important matter right now, as we're about to see a full-scale AWB once Clinton steals her way to the election, or perhaps when BLM ruins it for us and Obama chimps out.

Pic is mine. Slidefire stock, 1000 rounds of brass, can't go wrong.
>>
>>80454960

>reads this intro guide

This faggot uses terminology that a newfag will not understand

t. me newfag that barely understands this
>>
File: Lynch Factory.png (367 KB, 800x800) Image search: [Google]
Lynch Factory.png
367 KB, 800x800
>>80454960
https://soundcloud.com/couchtruthing/lynch-factory

fuck u nigger
>>
What are your thoughts on building your own lower using a lower 80%? I've seen a few vids but haven't tried it yet.
>>
The AR 15, which stands for Adolf's Revenge 15 million, and which was designed for a second holocaust of 15 million jews, fires the exact same bullets that were dropped on Hiroshima and Nagasaki in 1945. There's absolutely no reason for a civilian to own one of these and it's time for America to adopt common sense gun laws
>>
File: IMG_20151126_073349_HDR.jpg (2 MB, 4208x2368) Image search: [Google]
IMG_20151126_073349_HDR.jpg
2 MB, 4208x2368
>>80456147
a "built" AR will always be cheaper than its assembled equivalent.

i bought my AR essentially fully assembled, the upper and various parts were shipped to my home while the completely built lower received was transferred to my FFL. all i had to do was open up a bunch of packages, slide the bolt and charging handle into the upper then attach the lower with 2 pins. for less than $700 after shipping and fees i got a complete rifle with a Nickel Boron BCG, magpul furniture with ACS-L stock, mid length gas system and 12in Daniel Defense quad rail that sells for $300 on its own.
>>
>>80457508
>jap shitposting

Back to protecting America's interests abroad, GI.
>>
>>80454960

Army Reserve nigger had an SKS and the cops had ARs. He got a much higher k:d ratio so I'd rather go with an SKS than your plastic meme rifle. thnx
>>
File: arp.jpg (64 KB, 800x533) Image search: [Google]
arp.jpg
64 KB, 800x533
>>80454960
Recommendations on AR10? I'm partial to the 7.62×51mm 308 round. I've already got a FAL and a few other weapons that use that round, that and I have about 30k rounds stocked up. Was thinking of maybe at AR10 pistol.
>>
>>80459426
>that pic

what is going on here? do people customize real weaponry like it's a movie prop? That's fucking sweet
>>
File: IMG_1384.jpg (46 KB, 800x600) Image search: [Google]
IMG_1384.jpg
46 KB, 800x600
>>80459694
Components: -Spikes Tactical Pistol Lower With Color filled markings -Bullet Button -Noveske KX-3 Flash Hider -VLTOR CASV Rail system -VLTOR Front flip up sight -Magpul Rear MBUS sight -Magpul Grip -Ace Buffer tube -Rock River Arms 7.5" Pistol Upper -Extended Battery Assist Device -EOtech 512.A65 -CAA Saddle
>>
File: 4.png (51 KB, 657x527) Image search: [Google]
4.png
51 KB, 657x527
>tfw you will never be American and shoot an AR-15

We can't even own crossbows FFS
>>
>>80459947
>Components: wat

>bullet button
>MBUS
>Extended battery assist device

what's the battery for?

what's a flash hider?
>>
>>80454960
Hi /k/,
I didnt know you could build an ar yourself and save money.
how much should I expect to spend to build one?
>>
What kind of ammo options are there in a build your own AR?
>>
File: Eye of the Storm.png (106 KB, 1000x820) Image search: [Google]
Eye of the Storm.png
106 KB, 1000x820
>>80454960
What length barrel do I want if I'm buying to "be prepared" in case of race war?

I live in a suburban area.
>>
>>80464193
whoa anon, its for self defense.. remember that.. (till the time comes)
Thread replies: 21
Thread images: 8

banner
banner
[Boards: 3 / a / aco / adv / an / asp / b / biz / c / cgl / ck / cm / co / d / diy / e / fa / fit / g / gd / gif / h / hc / his / hm / hr / i / ic / int / jp / k / lgbt / lit / m / mlp / mu / n / news / o / out / p / po / pol / qa / r / r9k / s / s4s / sci / soc / sp / t / tg / toy / trash / trv / tv / u / v / vg / vp / vr / w / wg / wsg / wsr / x / y] [Home]

All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.
If a post contains personal/copyrighted/illegal content you can contact me at [email protected] with that post and thread number and it will be removed as soon as possible.
DMCA Content Takedown via dmca.com
All images are hosted on imgur.com, send takedown notices to them.
This is a 4chan archive - all of the content originated from them. If you need IP information for a Poster - you need to contact them. This website shows only archived content.