Questions that don't Deserve Their Own Thread Thread!!!!
I am thinking about buying an AR-10. I'm eyeballing Link Related
http://www.livefreearmory.com/product/lf308-20-hunter-rifle/
Does anyone know anything about the company or the rifle? Also considering the 18" but it's only 4oz lighter so... Anyhoo
Answer my question or ask your own and go!!!!
Thinking about bumping, but... I dunno....
Yeah, I guess I'll bump.
Please sir, May I have a bump?
Do I take it then that no one knows anything about this company?
Can't find shit about them online. Assuming you need a ~$1000 AR10 and you shoot right handed, just get a DPMS G2.
Either that, or buy one, and let us all know if the suck.
Luger p08 in my area for 800.
Beat to shit (lister says) but i see no scratches rust or dings.
Yes or no
>>30347398
Looks like a fine rifle, but I don't know the brand at all. Lots of new rifle companies these days.
In another, unrelated question, what would a person expect to pay for a good cerakote job on an AR15? I have been considering having mine done, I just don't know what a reasonable cost for it would be.
How come nobody made a mlok metal badge to put on your handguard to show off? Like a mlok pin for handguards.
I'm having a mental block, can someone just start listing off pistols? Striker fireds, DA/SAs, single actions, double actions, etc. No revolvers, no milsurp. I'm making a list
Can someone define the word fingerfuck, in the context of guns?
Does anyone have that poorfag guns guide image?
>>30350967
http://amagicalplace.wikia.com/wiki/APPROVED_POORFAG_GUNS
>>30350946
To fondle and feel a gun all over.
>>30347398
>DPMS G2
Picked up one of these recently, was fairly accurate even at 1k yards.
Seems to have problems feeding though.
Can anyone recommend a good laser boresight? All the ones on amazon are rated shit except the $100 ones.
Anyone familiar with Osprey Global optics? Good, bad?
What's a good price for a mannurhin PPK?
kinda more general 4 chan but...
so when you fuck up and post in the wrong thread or replay to the wrong person or with the wrong pic etc what's the time window to delete comments?
I'm going to get my first gun soon, and it is going to be my only gun for the next few years for a couple reasons that aren't really important.
I want to get a handgun. Primary use will be training at the range and getting familiar with firearms, secondary uses will be SHTF defense and hunting small game. I might want to get a CCW license in the future but not now.
I'm having trouble deciding between a Glock 17 and a .22lr pistol like the Ruger Mark III. I'm worried .22lr will be unreliable and garbage for defense (doable, but far from ideal). I'm worried that 9mm will cause too much damage to game animals and ruin the meat.
I'm also planning on getting a suppressor for whichever one I buy, if that matters.
I'd appreciate advice from any hasguns.
Would an EMP / Carrington event ruin DVD's?
i'm thinking about buying a bulgarian makarov for ~$300 when i'm able. are they good pistols for cheap? i want to complete my slavshit collection.
I'm building an AK from an 80% receiver.
I know it is illegal to sell or distribute the firearm once it has been completed. Is it illegal to let my friend shoot it at the range with me?
Is there any government (US) statistics kept on vehicular homicide?
Is the DD AR-15 worth buying? And if it is then what model?
>>30347398
Have a Maverick 88 which I suspect has a large amount of surface rust inside the barrel. I say surface because it's shiny and I'm seeing no pitting at all, but when I run patches, the thing is coming out all brown and shit.
Would it be better for me to elbow grease it or just find a new and clean Maverick 88 or Mossberg 500 12 gauge barrel that is chrome-lined and replace the damn thing?
>>30352806
Maybe in the FBI UCR like with all other crimes?
>>30352272
I've heard the ammunition is cheap, but that the gun was much cheaper in the 1990s.
>>30352273
Why would it be illegal? Selling of unregistered firearms is only illegal in a few states
>>30352273
>>30354299
Pretty sure you need to put a serial and maybe 'manufacturer' label on it before selling a homemade firearm legally
>>30352273
>Is it illegal to let my friend shoot it at the range with me?
I have the same question. everywhere I've looked so far, lending isn't permitted either, so...no?
>>30350182
ask for a boreshot and decide then
What exactly is the difference between 5.56 round and .223? Is 5.56 heavier and pack more force, or are they basically the same? If my AR-15 can shoot both, which do I want to use?
>>30354996
if rifle is labled 5.56 it can shoot also .223 but if the rifle is labled .223 its not advised to shoot 5.56 without making sure the rifle can handle it
5.56 is a bit hotter than .223
Where can I get wood furniture for my ak 47 wasr 10? Anyone have any good recommendation?
>>30354234
Unless you have a rifled barrel, it's just a smooth metal tube.
I just picked up a Marlin 30-30, anythung I should know/avoid/purchase?
I already have my eyes on an okay aperture sight. Help me out /k/owboys.
Are guns on planes even relevant anymore?
Obviously BRRRRRTT has its place, but Im more asking about the Raptor for example.
I would think that with the speeds they can go at and just how sophisticated air to air missiles are, 20-30mm cannons on fast jets are kinda defunct.
>>30355499
>What is Air Force doctrine leading up to the F-4 Phantom?
>>30355535
Could you elaborate?
>>30355584
The early jet age prompted that exact question, leading to the F-4 being developed without an internal gun. An external gun pod was later added because they were wrong.
Are there any resources the on the exact measurements of every single part of a gun? I'd be interested to see if I could recreate one in a CAD program
>>30356141
http://confab.fosscad.org/34/official-fosscad-mega-pack-v4-7-aramaki-release
I think this has some.
>>30352249
Considering that CDs are an optical medium, not volatile magnetic one, I would say no, they would not be affected. Then again I'm no magician
When using new, un-fired brass, does it need to be resized? I've checked around, most sources seem to say yes, you should put it through a resizing die, but a few say no.
I'm only just getting into reloading and I'm paranoid about doing shit wrong.
>>30356821
Not that into reloading but rifle should be fine without resizing, pistol/straight wall cartridges may need it as you often have to expand the neck before seating your bullet.
>>30356141
grabcad has a lot of gun parts
>>30347398
Well, putting one together out of bargain basement parts, purchased over a long time (whenever stuff's on sale) will cost around $800, inc. FFL and shipping costs, plus sights/glass. Realistically, that's a pretty good price for a .308 AR, but I don't know the company. I'm guessing it's DPMS spec, which means good things for parts commonality, and helps explain the low prices (Armalite spec has a lot of snowflake parts).
I would like to build something similar to pic related. Who sells this type of rectangular handguard?
>>30357078
VLTOR CASV, would be the closest I guess don't expect to find anything exact.
>>30352090
>handgun for hunting
not advisable, you want a rifle. get a ruger 10/22 for both hunting small game and familiarizing yourself with firearms. it will also be suitable for home defense - with good shot placement, 22lr is just as lethal as any other penetrative projectile.
>>30357184
I've noticed the MCX has a rectangular-ish handguard. Wonder if they are sold separately and for the AR-15.
>>30355103
Not sure what this means but, does that mean I should just let it keep its rust?
I just got a psa bcg for my first ar build. Do I need to open it up and clean/lube it or should it be good to go?
>>30357476
Not sure what he was going for either. Should be easy to clean, though, since there's no rifling. I'd give it an overnight solvent bath and then go hog wild with a bore snake.
Rust breeds rust, so best to do something bout it.
I have a worn out harrington and richardson shotgun. I'm new to guns in general and want to learn how to disassemble, reassemble and clean this gun. The info on the side of the gun is almost entirely worn off.
>>30357623
Strip it and clean it to remove the factory preservative (if any), then lube it, and reexamine it in 24 hours. If it can dry, it may drink in that oil like a sponge (metal is porous, after all) and have no lube left on the outside.
>>30357739
Google it.
>>30357739
Search YouTube. It's an AWESOME resource for cleaning. Some redneck will do it with you, step by step.
What exactly is plinking?
>>30355499
Guns don't weigh that much and extend the sorty ability of your aircraft.
Adding one is pretty much common sense.
>>30357784
Shooting at stuff for fun.
>>30350946
Picking up a gun and trying the controls.
>>30357784
This >>30357794, usually accomplished with cheap ammo. For example, no one uses TulAmmo (formerly known as Wolf) for any self respecting purpose, since it's dirty, overpowered, and not especially accurate. However, when your goal is to blast apart that 24 case of undrinkable store brand soda (Diet Dr. Thunder, etc) you sprinkled on the 25 yard berm, it's just the ticket.
Does anyone else that owns a Carcano have this issue with feeding? It stops at this point and does not continue without a firm push to get the round into the action. I am using Prvi Partizan ammo with this.
>>30357763
I did. I found a pdf for a similar gun by the same company. Here is hoping it is similar enough.
>>30357846
>wasting Diet Dr. Thunder like that
>>30356909
Thanks guy, yer it's all rifle stuff, .223 and .308.
>>30357846
Tula and Wolf are not the same. Wolf and the Bear ammo is of markedly higher quality than Tula.
Other than that, you're spot on.
>>30357869
Good stuff.
Googling old guns for .pdf's is usually what I do. You should try the Youtube route as well, as the other Anon suggested.
>>30357750
Will do, thanks.
What is a really good laser bore sight for 9mm?
>>30357897
The Wolf Military Classic is a whole different can of worms, but I think your basic TulAmmo is what used to be the basic Wolf line.
What does /k/ think of Polish rifles? I'm under the impression that polish steel is very good. Enlighten me.
>>30351486
Why do you need a boresight?
It's much cheaper to sight it at the range.
>>30358322
And more accurate.
>>30347398
Anybody have accessory recommendations for a 10/22?
Mostly looking for a 25 rounder that isn't built like shit or cost too much.
I also want one of those gatling triggers, but I have to go to Wiscansin for that.
>>30357078
That's like an H&K MR556 rail except the side rails have been replaced by those...things.
>>30358491
>Anybody have accessory recommendations for a 10/22?
Golf ball attachment.
>Mostly looking for a 25 rounder that isn't built like shit or cost too much.
Just buy the Ruger one.
So, is it actually true that a brown bear's skull could bounce a 9mm fmj? Because according to what I've read their skulls aren't too thick, but I really don't think it would stop a standard M882 9mm.
>>30359319
>golf ball attachment
Amazign. Solid rec.
>just buy the tiger ones
Will do. I've heard that steel feed lips are better, but I'll wait until I have problems for that.
>>30347398
I have a preban AK mag that I picked up because I live in Massachusetts. I tried loading it and only got like 10-15 rounds in when the follower stopped going downward and it jammed up. Go it be a dent in the side? Any way I can fix this. Prebans aren't too easy to come by now and it's going to get worse.
I'm buying my first gun lads, and I'm looking at the Moist Nugget since they're everywhere here in Texas, and so damn inexpensive. Any advice for a firsttime buyer?
What was the most effective German small arms weapon of WW2?
>>30360386
Zyklon B.
>>30360386
That's pretty subjective. I'd say either the MG42 or the MP40
>>30360409
On the Eastern front, not in some kikes imagination.
>>30360446
I would gather it's the MG-42. Actual casualty statistics based on weapons platform don't exist to my knowledge.
>>30354234
>Maybe in the FBI UCR like with all other crimes?
i poked around there and couldnt find any thing with cars used as killing tools. so maybe not.
>>30360096
If it comes with a bayonet, check to see if the serial number on it matches the rest of the gun. They often ship them with the wrong bayonet, and since the guns are all hand-built in factories the bayonets and the rest of the parts are custom fit to that specific gun. You can rework the bayonet with a small grinder tool to get a fit if not. Also, never rely on the stripper clips if you intend to use it for self defense (I wouldn't). I also note that the gun's accuracy changes with the bayonet attached. Mine fires better with it. Check to make sure the bore isn't fired out. It'll look worn through the barrel.
What would be a good scope to put on a K-11/K-31?
I'm going to use it mostly for target shooting but I might do some hunting.
>>30347398
Anyone know of a good source for random old gun parts? I've looked at Numrich, Midway, Brownells, etc, and I've been unable to find a Marlin Camp 45 Trigger Guard Action Assembly.
>>30362551
This is up on Gunbroker for $300 minimum bid, no bids yet. Marlin Camp 45 barreled action with charging handle, recoil spring, and bolt assembly. Problem is, it's no use without the rest of the action.
I'm looking for something to deal with snakes while working down by a creek. I thought about using a .22 with shot shells, but I've read a few places saying that rat-shot isn't worth it. Should I just get a .22 and use shorts? The place is pretty far out in the country, but I don't want to scare any neighbors.
>>30361010
It might be in "others" category. Is there an others category?
What weapon do you recomend to make a masive shooting at schol?
>>30362713
I would suggest either a small bore shotfun with birdshot, a high velocity pellet gun or a cheap .22 plinker. Have used all of the above on the family farm to take out anything up to chicken sized with minimal fuss, and though I have never tried .22 shot I can't imagine it having enough oomph to kill anything more than a couple feet away. At that range regular bullets or birdshot should serve you better anyways, with a much better effective maximum range.
>>30347398
Can I make multiple suppressors on the same Form 1 or do I have to pay 200 damn dollarydoos every time? I have like four guns I want to suppress :<
>>30351692
depends on the caliber
>>30352272
they are good guns and still a good deal, but you could probably get one a little cheaper.
>>30352273
should be legal to let your friend shoot it unless you live in a shitty state, but then it'd probably be illegal to ever have. you can sell guns you make, you just can't make guns with the intention of selling them.
>>30355086
http://www.ebay.com/itm/7-62-Romainian-rifle-stock-set-SALE-LOWER-PRICE-/222131563316?hash=item33b812ab34:g:k3wAAOSwa81XSFmc
i don't know when these sets started going for money.
>>30358222
breddy good
>>30360073
http://bushcraftusa.com/forum/showthread.php/151353-How-to-fix-a-dented-%28bent%29-AK47-magazine
there is no way to distinguish a preban mag from a post ban mag if it's combloc standard.
you may need to buy some magazine repair kits to fix it.
>>30361010
it's tricky, vehicular homicide covers negligent driving and drunk driving as well as intentional pre-meditated car murder.
>>30361991
wouldn't be a terrible idea
>>30362658
they are exceedingly rare, you'd have to hunt around for a couple of years to find one at auction or on a trade board, stripped they go for 150 and everyone with a camp 45 will need a new one eventually.
>>30364335
just kill yourself
How the hell do you transport a long gun if you don't have a car in the state of Texas?
>>30362713
Get a snake gun!
They are like handguns with shotgun shells, a little pricy but because of the way snakes slither it is worth it
>>30364858
locked container? wait you can open carry rifles in texas can't you?
>>30364858
>>30364882
You can OC both pistols and rifles now.
>>30350407
Depends on the place and how fast the turnaround is, but I've seen prices range from as little as 200 to all the way to 500 bucks.
The big issue is whether you want just a single color or multiple/pattern setups. The more complicated, the faster the price'll rise.
But yeah, cheapest I've ever seen was about 200 for a full sized rifle.
>>30364936
This is a little misleading.
You have to have a concealed handgun license to open carry pistols in Texas
ammo grain question
for something like 9mm in a cz75, I've heard 124 grain is ideal, but if I didn't know that and had boxes of 115, 124, 135, and 147 grain with me at the range, how would I deduce which one is better for the gun/better for shooting?
>>30366132
Whichever groups best
And even among he 124gr loads the CZ prefers some over others. Mine loves 124gr Hornady TAP for example.
Anyone know where I can buy a MAG tactical upper? I can't find anything online and their website 404s. Alternatively anyone know of any other super lightweight AR uppers?
I like precision shooting.
I have fun and need to practice my pistol shooting.
I want a gun I can defend myself with.
Carrying is not an option in my country.
I don't really enjoy shotguns.
Would I be wrong to get a bolt-action 308 and a 9mm pistol?
Rem 700 police is 1700, T3x Tac 2100. Still go with the T3?
CZ75 SP-01 is a really nice pistol but also not cheap at 1200. Glock 34 could be had for 800.
Which two? Or something completely different?
>inb4 .22lr
>>30355499
We learned this lesson in Vietnam. I really hope people like you don't end up in a position to decide what does and does not belong on a plane
Is the Diamondback DB-15 any good? An area gun store has them for ~$500 or so.
I'm planning on building an AR10 soon. I know Palmetto State does a good 4th of July sale ever year, but the majority of their AR10 parts ate out of stock. Does anyone know if Aero Precision parts are compatible with PSA parts? I know that Aero Precision follows the DPMS style, but all I'm seeing on Palmetto State's website is "AR10s are not standardized like AR15s, we recommend you use only PSA parts on your build".
>>30366193
https://www.ar15.com/archive/topic.html?b=7&f=158&t=1434202
i'd think long and hard about building an ar on that after all the reading i did to dig that up.
>>30366266
depends a lot on your area, i'd stay away from remington but it's otherwise hard to comment without knowing what's on the shelves and what it goes for where you are.
