80% edition
will greencarpets even mill out his lower?
{spoiler:no}
old thread >>30200291
>>30204458
edgemaster edition
Had no idea a single lower could contain so many bad decisions.
>>30204485
I'm kind of sad that they missed the auto position engraving and colorfill.
In and bored af. Where can I buy 2k rounds of 62/68 grain .556?
>>30204458
Fug obb. It will get done soon. I've been making actual progress with this. I got my lowers like I said, ordered my LPK like I said, and my bad lever. Next is my retardedly expensive stock
>>30204338
Thanks
>>30204503
Also pic.
>>30204505
>retardedly expensive stock
which one?
is there anyone out there that makes a billet 9mm lower with a straight trigger guard
>>30204503
LAXammo has PMC 62gr in stock.
https://www.laxammo.com/rifle/5-56-ammo/pmc-x-tac-5-56-62-gr-green-tip-20-rds-556k-2-detail
>>30204534
UBR
>>30204567
UBR master race
>>30204611
Soon
>>30204557
They have zqi too at 1200 rounds. I've never shot the shit is it on par with federal American eagle?
>>30204485
if no fucks given was the only thing written, id rock it
>>30204611
whats with the riser bridging the rail/receiver gap?
>>30204625
id say on par.
>>30204623
I'd be more worried about making your lower functional than obtaining the UBR though, honestly.
>>30204656
It will be milled soon, and I have the LPK and bad lever on the way. I mill it, throw a stock on and my lower is finished
In for Aero.
>>30204645
At the time the handguard had had the threading stripped out of its retention screw holes, so it was prone to rotating or walking off. A nice tight riser bridge was a quick and dirty fix.
>>30204667
I regret the bad lever man, unfortunately when I got it I started having problems with the screw loosening so I loctited the thing in place.
Now it won't come off and I'm stuck with it.
>>30204714
That's too bad. Idk if you're the anon from the other night but another guy complained about his being locktited in place.
What kind did you use?
Might be able to heat it up with a heat gun and break it free
>>30204732
I am that guy. The loctite wouldn't be such a problem if I still knew where the tiny allen key was that came with the thing. I have a large set of them but none are quite an exact fit and I've semi stripped the screw attempting to loosen it.
If it comes to it I might end up breaking off the entire bolt release and replacing it.
>>30204714
definitely try heating it up. if you have to get it off, you could try epoxying a throwaway allen key in there
>>30204556
>556
seriously wondering
>>30204774
Email magpul and see if they will send you the Allen key
>>30204791
>torx
>>30204774
i forgot, its not an allen key, its a torx screw- i want to say a number 6
>>30204787
When was the last time you ate a fruit or vegetable?
>>30204799
I repeated his terminology
>>30204812
>>30204799
Ah, silly Magpul, using such an odd tool for their product. Honestly I installed it so long ago that I don't remember what I used for it.
Since I hate calling people and dealing with companies I'll probably just do some bubba fix, up to and including breaking the thing off.
>>30204812
i don't care
>>30204810
t9
>>30204623
Please stop posting. Thank you.
>>30204849
But an Email would take 5 min and you could probably sell it used for $15..
>>30204851
K
>>30204853
Every time an anon posts that, I devote another 1,000 posts
>>30204812
the other day
>>30204849
>using such an odd tool
vastly superior screw/tool type
>>30204874
If your answer is anything but "a little while ago" then you're doing something wrong
>>30204864
Then you truly do not care about /k/ and quality content. Seriously, why do tripfaggots like you always have to be such pricks when people call you out on your faggotry?
>>30204849
buy this to remove it
http://www.shop.pbtools.us/Titanium-SwissGrip-Torx-Screwdriver-T9-84009-60-Ti.htm
>>30204902
Tripfags in general add way more content to this board than anons.
What's /arg/ listening to tonight? Pic related.
>>30204849
i actually lost the tool it came with also. i went to lowes and bought a small torx/screwdriver set for $6
>>30204905
>buy this gucci Swiss tool so you can use it one time to remove a $20 accessory
Naw man if I do that I don't have as much money for gucci parts in the future.
I'll probably just query some of the older men in my life, one of them is bound to have one.
i've been trying to find a m203 heatshield for my next ar15 build; but, to my dismay, they seem to be made without a bottom.
anyone else have any luck?
>>30204930
https://m.youtube.com/watch?v=SECVGN4Bsgg
>>30204930
nothing but the best
https://www.youtube.com/watch?v=FVJRmdG_q10&list=RDEMK0RbexC0Bl2-Ho7RwqytzQ&index=34
>>30204931
A more realistic COA
>>30204946
Is this a joke? You're suppose to have a 203 under it.
Did someone say 80%?
Pic related as fuck
>>30204922
Of course, because remaking circle jerk threads to repost the same five images is really contributing to the board.
>will greencarpets even mill out his lower?
Will this guy ever get glass?
>>30204969
yeah i figured that out, man. I was hoping- in my heart of hearts - someone it came with a removable bottom plate, or someone had taken up remaking it for a strictly civilian market.
>>30204957
Impeccable taste
https://www.youtube.com/watch?v=LltaJU3ORcM
>>30204957
Fuck I hate that song.
>>30204961
Haven't listened to MMJ in a while.
My dog likes hood rap.
>>30204935
>buy this quality tool so you can increase the number of tools you own and become more self sufficient by the day
>nah man
numales
>>30204970
i like those v7 parts, much aesthetics
>>30204946
This is what you deserve
>>30204930
2hu eurobeat mixes
>>30204995
Those do look cool as hell, what are they made out of? I don't think it would be that difficult to fabricate a bottom for it.
>>30205028
the same stuff as the rest of M16A2 furniture with a steel/aluminum sheet insert to deflect heat.
>>30205008
Thanks, V7 makes some nice stuff. That was one expensive lower to finish though.
>>30205004
>Haven't listened to MMJ in a while.
well we need to change that
https://www.youtube.com/watch?v=VYWtyJGq4vo
https://www.youtube.com/watch?v=Bpdwwa7lsUI
>>30204974
It's funny because anon makes 100% of the bait threads.
>>30205000
You're goddamn right
>>30205004
But why?
>>30205005
I am a single renter that moves constantly, literally only tools I own are those required to build ARs and target stands. Everything else is dead weight for me.
>>30205011
i'm not sure if you're bullying me or not; but thanks, man.
>>30205059
Theyre good but only when I'm in the mood for them. I perfectly replicated Stan smith off American dad with them.
>>30205060
Because it reminds me off "I come from the land down under!" And I fucking hate that song.
>>30205117
What about pic related
>>30204946
Just get an airshit M203 on that bitch and call it good.
>>30205080
If you had been able to put two and two together you would have seen that the bottom portion of that handguard is the 203 itself. I hope you spent less than 20 dollars on that.
>>30205117
What about this song?
https://www.youtube.com/watch?v=NYLo7d_rXfw
>>30205150
I spent less than $0 on it as i haven't bought it yet.
I don't think it's immediately obvious that the M203 would be the bottom of the handguard. that certainly isn't the way modern small arms attachments work.
>>30205080
>>30205140. <best advice you can get
http://www.evike.com/products/30619/
Throw something like link related on there. Rip off the muzzle device and shit post your pictures on here. But outside of that it's pretty well useless.
>>30205154
Kys asap. Or listen to scarface's first album and redeem yourself
>>30205139
I actually like men at work. 7/10 choice.
>pic related is god teir. Good night
>>30205154
ear wash
https://www.youtube.com/watch?v=kemivUKb4f4
https://www.youtube.com/watch?v=otv_yf1WKTA
https://www.youtube.com/watch?v=0dYPYAMxviw
>>30205208
>kys asap
>coming from a trip I've never seen before today called "Faggotmanure"
No, you kys. Scarface a shit.
Tears for Fears is decent tier though.
>>30204969
oh how i laughed
>>30205207
>http://www.evike.com/products/30619/
reading through the product descriptions on that website have really turned me off of the whole idea.
thanks for your assistance. my 'tism has been cured!
>>30205259
That last track is chill as fuck mang
>>30205263
>from an anon who wasn't in the thread where I got this name.
Kys desu familia. Also gnight.
>>30204946
>they seem to be made without a bottom.
Yeah, take a guess what went in that big gaping hole.
>>30205186
>that certainly isn't the way modern small arms attachments work.
That's where you are wrong, on both the original m16 rifle and the current m4 carbine the M203 attached in the same way. Both requiring the removal of the bottom handguard. Be it the polymer hand guard or KAC RAS.so actually that is how some small arms attachments work.
>>30205313
oh well oops. i guess i learned something new today.
>>30205290
finally someone with good taste
https://www.youtube.com/watch?v=UxD5Z0ClLd8
https://www.youtube.com/watch?v=gmWmvR_PwXA
https://www.youtube.com/watch?v=oF9yHO-UUws
https://www.youtube.com/watch?v=_hI0qMtdfng
>>30205308
i like this gif
>>30205335
there are railed versions of the m203 but they aren't in as wide of circulation as you would think. Simply because of of existing supply lines. pic related is an example of the mounting system.
>>30205308
Who is that?
>>30205380
undertale trannie goat
so it turns out that, anti-seize on the threads for my can are no goo, it gets really dry and hard when exposed to high heat.
would grease be better or should i clean it with a brass brush and just spay it with dry lube(graphite) and let it be?
>>30205395
Might as well try a high temperature grease and if it doesn't work then try graphite
>>30205395
is that a toenail you filthy inbread
>>30205390
>trannie
He's just effeminate.
>>30205395
Are you using high heat anti seize?
I believe it should be the copper one, instead of the silver colored general antiseize
also, last range trip, i poured water in my can to help it cool(was at 300f) and forgot to dry it out so now it looks like a smurf used it as a pocket pussy.
>>30205418
red n' tacky?
the anti-seize was rated to 1600*f but i think the carbon fucked with it and it didn't get that hot.
>>30205442
what do you know, it is.
>>30205452
using the aluminium based one rated to 1600f
>>30205479
The carbon in the grease is an interesting point, I guess you never know what it's going to do to the compound.
Super lube is rated at like 600 degrees
>>30204458
What kind of groupings do you guys get shooting 55gr out of a 1:7 barrel?
First AR15.
California.
MS4 Sling and BAD Lever on the way. Also a 10/30 HEX Mag because it was on sale.
>>30205620
>>30205640
Not bad. M&P is a good gun.
I also have a cheap 10/30 hex mag
>>30205704
After shooting the ranges AR15, my friend said 'fuck it' and bought a Sport 2. I couldnt be left out so I had to get one myself. Always been more of a pistol/shotgun guy, but with threats of all these crazy laws happening, I figured might as well get an AR15 now before it is impossible.
Got a new stock, rail covers, foregrip, red dot, pistol grip. extra mags, and a charging handle. After the sling and BAD lever get here I guess all I need is a good light.
I really love this BCM Gunfighter charging handle.
>>30205779
Did good.
>>30205779
Get a surefire light and move that Vortex as far forward on your upper as possible. But looks goat to me bruh.
>vortex stronk
>>30205862
Is that a SPARC II?
>>30205872
yes
>stolen valor soon
>>30205936
Excellent.
>>30205945
Not soon enough. Damn you Hawaii and your cursed shipping times.
>>30205956
You're in Hawaii?
>>30205936
>tfw tempted to get the LMT version of these
>>30205903
someone shot at it with a shotgun?
>>30205965
shipping from Hawaii
Keep up with the thread
>>30205965
no, its shipping from HI. Pretty sure its coming straight from a USMC base there.
>>30205966
Or just ebay and get a muhreein one
>>30205965
>guns
>Hawaii
pic one
>>30205970
correct
I shot it from either side at 7yrds with a 12ga among a bunch of other stuff I've done to it so far.
>>30205977
No, it needs to match.
>>30206002
>greentext the rifle
damn dude........damn
>>30205977
Useless accessories: the image
>>30206022
you talking about the bad lever?
>>30206011
You love it
>>30206038
well its different for sure
>>30206026
and the ladder rail cover on the top rail and the afg at the angle you're holding it
>>30206061
>what works for me is the only way things should be done
k
>>30204557
>>30204645
is LAX ammo a reliable place to order from? i thought about getting some ammo from them recently but changed my mind...
>>30204849
Go to a motorcycle shop and ask them to pop it off for 5$
>>30205975
No u
>>30205977
Kek
>>30205982
No
>>30206114
Supposed to be here saturday though. We'll see about that usps, we will see.
>>30204458
ALG ACT?
>>30206075
Even though I don't need them for the grip, I need some extendos for my 19 because they look cool
Is there a lower with a flat magwell, as opposed to the angled one that's common?
>>30206159
>they look cool
Not that they add 5 rounds or anything like that though. I obviously just load it to 15 and leave it.
>>30206172
The important thing though is that they look cool
>>30206144
i just ordered some gun shit a few minutes ago from PA, hopefully it gets here for Saturday to
>>30206203
Absolutely, what weeb shit should i get laser engraved onto it?
>>30206205
Buying parts is the fuckin best. Like christmas all the time. I love doing builds took, parts show up for a solid weekend and the its build time on the weekend.
My new project.
What kind of buffer spring assembly thing should I get? I'm set on the MFT minimalist stock.
>>30206217
A pair of testicles
>>30206229
a milspec buffer assembly should do you just fine.
>>30206230
good thinking
>>30206229
An expensive one
>>30204458
>80% edition
My 20" AR15 is an 80%
>New wall display
>It's chalk board painted to draw the guns location and write stuff down.
>>30206242
>>30206240
I want a soft recoiling one that is reliable.
>>30206144
Good luck
>mfw $8 shipping for PSA LPK and it's still not here
>>30206252
dude, its a spring and a buffer. Thats it.
But I guess you could buy a normal buffer kit and then buy a griffin armament AR-SOB
>>30206252
That'll cost you about a grand
>>30206268
>dude, its a spring and a buffer. Thats it.
NO. That can't be. There must be some elitism to this or it's not fun.
>>30206274
kek
>>30206281
3500 for the best buffer ever
>>30206274
holy fucking shit
>>30206298
>>30206288
H I G H _ E N E R G Y _ W E A P O N
Good night
https://youtu.be/_BPVtw6oRno
>>30206456
I hope you don't wake up!
>>30205862
Did it survive the shotgun blast?
What are some good optics for 50-300yards? Less than 300 bucks Because I am a poorfag. I was thinking about the Nikon p223 in either 3x32 with the bdc carbine reticle or the p223 3-9x40 with the duplex reticle. Are they any good or should I get something else.
What else is worth doing?
>>30206497
Giving me free shit and buying lots of hookers
>>30206483
p223 4-12x40 here, works gud
You don't necessarily need that much magnification for 300 yards though...
>>30206559
God do I love the UBR.
I'm kinda stuck between the Leupold vx2 or a strike eagle.
I'm gonna call turners and see what they have.
I know the salesman told me they have a really popular vortex for AR's but it wasn't the strike eagle....IIRC it retailed around tree-fiddy
Side charging 80% checking in
Mega Arms Maten lower + Aero M5 Upper, anyone know if that works?
>>30206559
Yeah I am looking for a close to medium range scope that can reach out in a pinch. I don't think I would take a shot past 300 unless I really needed to. Is a fixed 3x optic good for that or should I just go with the 3-9.
>>30206576
Yeah since I have no BUIS on that one if baddies get inside practical 4x engagement range I might have a club a mother fucker. Forward thinking.
UBR4LYFE
>>30206643
POST
MORE
>>30206617
I guess my only doubt about the strike eagle is I want more than 6x
>>30206681
Kek
>>30206669
I have a 4x in addition to the 4-12x. My next acquisition will be a 1-6x of some sort for just that kind of use. Not a big fan of fixed power optics personally.
>>30206617
Get dat eagle.
>>30206693
B-but I want more than 6x!
Then there's this...
http://shop.opticsplanet.com/leupold-mark-ar-mod-1-3-9x40mm-p5-dial-riflescope-matte-black.html?_iv_code=LU-RS-ARMOD-13-9x40-115389&utm_source=google&utm_medium=cpc&utm_campaign=plusbox-beta&gclid=COOAzuHql80CFcYlgQodi5IPdQ
Fucking damnit why can't I find what I want?
>>30206684
pupper added for scale
>>30206643
>scope mount backwards
>mount clamped to both receiver and handguard
>>30206701
Take pics w/ better light. I need to thoroughly enjoy this
What optic?
>>30204458
My 80 build almost done. Just procomp which I'm probably going to reorder tomorrow because fuck waiting for back order.
>>30206663
It should, they're both DPMS pattern.
>>30206716
Intentionally backwards or I'd scrape my knuckles side charging
>>30206721
Luepold MK 4
>>30205956
Pls nobully but what barrel shroud is that?
>>30206773
http://www.larue.com/larue-tactical-120-handguard-lt15-12
>>30206773
>>30206806
Actually the pic you linked is an 11", not 12"
Dubs decides my tripcode for the next 24hrs
>>30206820
#CatLivesMatter
Slowly learning how to crop and reduce file size without shitting on the quality.
>>30206855
If your camera has the option, drop the MP count on it.
>phone has 12mp camera
>take photos at 5mp because they look better and use a quarter the space
I could probably still go smaller too.
>>30206864
I thought taking them at higher quality and lowering the file size would look better than lower initial quality, but it turns out I don't know shit about pictures or cameras.
>>30206855
With my iphone I just crop out the edges
>>30206820
SHYGAYBOY
>>30207022
Guess so
>>30207028
lol
I know where i could get ahold of 100% lowers with no serial numbers, should i do it? What would the consequences be if i got caught with it? Commieforniafag here.
>>30207318
20 years in Federal pound me in the ass prison, especially so in commiefornia.
>>30206839
Shit, nice DMR bud. Digging the Luth stock.
>>30207318
Buddy could always Ill-eaglely mill some 80%ers for you.
Otherwise, nope.
This is a cool article
http://www.defensereview.com/tactical-ar-15m4m4a1-carbine-aftermarket-accessories-for-military-combat-applications-the-competition-to-combat-crossover/
>>30207429
it's also pretty old
>>30207764
And yet it's new to most people in this thread.
>>30207831
But, i saw it on here a few months ago.
>>30207909
Hey try this shit for your can. We use it at the plant pretty often.
>>30207930
Seems pricey, i think i'm just gonna leave it dry. It worked fine before and sf sends it that way.
>tfw you will never be allowed to own an AR in your country let alone a semi of any kind
save me ameribros
>>30207991
are you a cute grill? You can be my mail order bride
>>30207986
I have absolutely no idea what the price is because the shit just appears out here. If you were local I would smuggle ya some.
In
Good morning niggas
>Upper and BCG shipped
>=D
>>30208000
you'd take a dude too
trips confirm it
>>30208307
no benis
>>30204484
is that the magpul stock or sopmod stock?
>>30204458
Where does /arg/ get their 80% lowers?
What do they normally go for?
>>30208571
Thats a B5 Sopmod
Building a suppressed sbr here,
11.5 inch or 12.5 inch barrel?
adjustable gas block or switch block?
>>30208659
10.3 inch and switch. Giddy suggested to me the W.A.R upper. Look into it
>>30208659
If you are concerned about external ballistics but want to stay short, 12.5", for unsuppressed smoothness you can go 12.5" mid gas as well. If you want to be shorter than a 16" rifle with the can 10.3/10.5".
11.5" is for copouts buying factory rifles that have to be tuned for the dumbest of users.
WAR Upper in combination with an adjustable gas block to fine tune at the start, set and forget is truly the best choice.
>>30208698
>>30208716
Sorry to say that I have a stag arms lefty upper... With that in mind, would you guys suggest a noveske switchblock, govnah or syrac/jp/slr adjustables?
Any concerns on unburnt powder blasting away a suppressor's lifespan for 10.5/10.3? I do plan on using a muzzle brake for sacrificial baffle.
Is the "11.5 > 10.5 due to 40% dwell time" an old bullshit meme?
Thanks for the replies.
>>30208805
I've only had experience with the syrac and it's worked well on my buddies gun but his is an unsupressed 16" gun. I've never suppressed an sbr so I am the wrong guy to ask. I am only going off what I've read. I know the mk18's are extremely popular right now but I haven't started building mine yet so I don't know much about em.
>>30208805
>could help with your questions
I like being a lazy fuck though
>>30205479
Can't wait to see you destroy your suppressor because you're an autismo about cleaning shit that doesn't need to be cleaned.
>>30208805
For a single adjustable source, I like the govnah. Order it with the pilot dimples and tune it with a hand drill for the weakest ammo you will shoot. Yes adjustment requires a free bullet or a pokey tool, but you aren't counting clicks or worrying about threaded regulators gumming up with carbon overtime and getting stuck.
The switchblocks are tuned to Noveskes specifications, not your individual rifle and ammo choices. Furthermore touching hot gas blocks with my hands to adjust them or being unable to shroud it with a rail without being limited to the noveske rails always bothered me.
As for blast baffle life on a 10.3/10.5 I use a brake mount so the brake serves as sacrificial baffles as well. How much it helps with a Stellite blast baffle/core on modern designs versus older suppressors that had full stainless baffles is up for debate but it gives me piece of mind.
>>30206026
What is your favorite optic out of those? I want an MRO but I don't want a lemon
Cryptic black is back in stock
>>30208928
>Is the "11.5 > 10.5 due to 40% dwell time" an old bullshit meme?
It is true, however if you are planning on tuning your gas system already then it doesn't matter. It is a concern for those who are just throwing a rifle together and shooting it with anything from the shittiest low power ammo to super mega firebreathing bolt lug cracking handloads.
>>30208886
That's fine, I am being lazy too.
>>30208928
Thanks
So I filled out a form 1 for 11.5 barrel but it really doesn't matter what barrel length I get does it not? I mean I guess I would have to send them a notification of permenant configuration change.
Got myself an M&P Sport. New to ARs and /k/ in general. Any parts you guys would recommend?
>>30208992
Get a new complete upper and lower.
>>30208976
>So I filled out a form 1 for 11.5 barrel but it really doesn't matter what barrel length I get does it not? I mean I guess I would have to send them a notification of permenant configuration change.
If you are not going to keep a 11.5 barreled upper on hand, then yes I would notify them of a configuration change just to cover your bases.
>>30208992
its probably fine just the way it is
>>30208992
Shoot it, a lot. Then make part purchases based on areas you feel the rifle could be improved for how you use it.
>>30208992
ammo and mags
oh, and an Elcan
And a can
New front rail
Geissele trigger
And a paint job
$200 carry case
>>30208992
Lots of ammo. Shoot it until you think you want or need something to make yourself a better shooter. Then Research every part you buy extensively. Noy everything has to be gucci despite what /arg/ says
>>30208992
Ammo mags targets getting the fuck out of /arg/ if you know what's good for you
>>30209071
Do you have some references for shooting/sighting an AR? I'm decent at an indoor range with a max of 25 yards but I don't know what adjustments to make outside as I cant hit shit at 250 yards and I can't see where I hit at 100.
>>30208992
light
optic
sling
rail
stock
trigger
>>30208954
The Aimpoint PRO all damn day
The MRO has a .25x magnification that is dumb as fuck.
The sparc 2 has shit battery life and 8hr shutoff
The PA-MDS has a .25x as well but is worth it for the cost
>>30209092
This except sling before optic.
>>30209092
Revy is one of the worst characters ever
So considering a 14.5" barrel on a carbine length gas system what would my ideal twist rate be for common ammo's? I see a dichotomy choice of 1:7 and 1:9 but what about 1:8 is this the consistent in between or does it just make it less effective with both light and heavy grain projectiles?
Another retard question. Do you guys regularly spend thousands on a single sight? The last thing I am is a NEET, but that's still pretty steep even for my ambitious ass. Or do you guys find good deals or purchase alternatives?
>>30206144
i have a shitload of batteries for that thing and dont have one....
fml...lol
>>30209147
What do you plan on shooting with the rifle?
What ammo do you plan on using?
Let's be honest here, you aren't an operator. You're gonna punch paper, and probably with cheap ammo.
>>30209158
No. Acogs are about the standard high expense of /arg/. You can get red dots for a lot less.
>>30209110
That's not revy
>>30209179
Cool. What makers?
>>30209184
It's all garbage.
>>30209190
Aimpoint makes great red dots. I'd say top of the line at an affordable price.
Vortex if you're really broke.
>>30208603
Anyone?
>>30209110
That's not Revy. Roberta is probably the third best anime character I've ever seen. She's only beaten by Lupin and Spike.
>>30209207
80% lower store
just google it
>>30209190
Primary Arms Advanced Micro Dot
>>30204505
Who's lower is that?
>>30207318
the risk is sooo not worth the reward.
>>30209184
Don't you have a pizza to eat all alone in your car?
>>30209217
I see them ranging quite a bit in price.
I don't want to buy one for $50 and it be a piece of shit. That's what I'm asking. Specifically which are reputable.
>>30209083
second this.
>>30209267
>car
>implying
loool
>>30209283
He does it like every night. He eats a whole pizza in his car by himself.
Thanks for helping a retard out yesterday /ARG/.
I'm glad I finally understand how to use a red dot sight.
Also, does anybody have any experience using the magnifier with the Sparc? It's kind of shitty and it really tightens up the field of view but I feel like it could be useful for those 500 meter shots.
>>30209275
anon, lowers are like the simplest part of an AR.
>oh golly gee wilikers i like the looks of this lower
>buy lower
>wait
>lower arives
>oh boy, i just cant wait
>drill holes using jig
>clean up
>paint
congrats, you bought a peice of metal thats exactly the same as millions of others, and then drilled some holes, your like a machinist or a wizard or something.
tbqh anon, if you have ever used a drill press and sand paper, you can do it.
TL:DR
>buy asteticly pleasing 80% lower
>drill holes
>they are all the same
>jig is important
>>30209288
maybe if he didnt eat so much danm pizza he wouldnt be so fucking poor.
I just finished my first ar 15 for some reason the barrel shakes and wobbles does anyone know why that is?
>>30209391
either your upper and lower fit is really bad or you fucked up installing the barrel to the upper reciver
>>30209168
Wow this board has become insufferable. Your either a civilian or a POG but anyways, I have about 1000 rounds of 62gr pmc green tips and I'll probably shoot downwards of 55gr federal .223 so probably that.
>>30209492
>Wow this board has become insufferable
There's always been a few of those dickheads on here. Although, I'm not certain whether that guy was trying to be a dickhead or be helpful.
>>30209391
did you put the barrelextension pin into the corresponding opening on the upper ?
>>30209492
No anon, I'm just being realistic.
Probably 1 in 9 then. You may as well match the barrel to the ammo, and that'll do better than a 1 in 7 for 55gr 223.
1 in 7 will do better with heavy, but if you're not really planning on shooting them why bother?
>>30209522
Just being realistic. If you aren't going to shoot a lot heavy projectiles, and instead shoot a lot of 55gr cheapo, you may as well get the barrel for that ammo.
>>30208805
>noveske switchblock, govnah or syrac/jp/slr adjustables?
Noveske if you want to quickly switch from suppressed to unsuppressed, i like my slr but it's not for constant adjustment.
> Any concerns on unburnt powder blasting away a suppressor's lifespan for 10.5/10.3?
As long as you aren't magdumping all day, a brake will only extended the life by a few thousand rounds, i suggest using a brake just to make the can quieter.
> Is the "11.5 > 10.5 due to 40% dwell time" an old bullshit meme?
Yes but you can just open the gas port up and fix that.
>>30208922
Already broke it once, if i send it in 5 times, i get a free hat.
Also
>anal about cleaning
Dats not me
>>30209579
>you may as well get the barrel for that ammo.
Which would be 1:7