Canada General
Images are sometimes not shown due to bandwidth/network limitations. Refreshing the page usually helps.
You are currently reading a thread in /k/ - Weapons
You are currently reading a thread in /k/ - Weapons
Pastebin: http://pastebin.com/EZCrqG5n
Current news: Bill status as of June-7
>E-111 AR-15 Petiton 25.2k signatures Status: Complete, parlament has until June 27, 2016 to respond
>E-124 Petition to add property rights to the charter.4.3k Signatures Status: Complete, parlament has until July 20, 2016 to respond
>Bill C-230 An Act to amend the Criminal Code (firearm — definition of variant) Status: Second reading/Continuing debate (22 In order of precidence)
http://www.parl.gc.ca/LegisInfo/BillDetails.aspx?Language=E&Mode=1&billId=8111356
>Bill C-246 Modernizing Animal Protections Act(Hunting - More strict measures against hunters/trappers) Status: Second reading/Continuing debate (16 In order of precidence)
http://www.parl.gc.ca/legisinfo/BillDetails.aspx?Language=E&Mode=1&billId=8122718
>Bill S-223 An Act to amend the Firearms Act and the Criminal Code Status: Dead after 15 seatings unless someone re-sponsors it. (Seating 12of15)
http://www.parl.gc.ca/LegisInfo/BillDetails.aspx?Language=E&Mode=1&billId=8177186
>CPC details their new platform for firearms reform
http://calibremag.ca/cpc-convention-2016-firearms-policy-proposal/
Any good ranges in or around Windsor ?
Im looking to shoot some N.R. stuff ?
>>30202159
There's a couple maybe an hour's drive from you towards london. You can always just google "Gun Range" and the map should show you all the ones closest to you. I live in Waterdown so normally I drive out to Silverdale, but that'd be a long ass drive for you to do.
what's Canada's favorite Overwatch hero?
>>30202819
I dont play meme games.
>>30202858
This
>>30202819
D.Va and Mei but only because of rule 34, I don't play team forteress3
>>30203200
basically this
>>30202103
Why on Earth do we get screwed so hard for optics and practically every important accessory? For example, it costs 320 CAD for a Sparc II red dot that retails for else than 200 USD in the US. I've noticed that certain manufacturers such as Vortex are horrible for mark-ups and others such as Bushnell are somewhat equal. Even taking the exchange rate into account we are getting fucked hard.
>>30203528
Economics.
Also just get a holosun.
>>30203528
>optics
People who can't see irons shouldn't be allowed to own firearms.
jesus christ how hard is it to find a fucking barrel.
i need an 11.5" AR barrel in the lightest profile humanly possible.
>>30203528
Our dollar is shit
>>30203921
saudi fucking shits
>>30203838
Closest to 11.5" I've seen is the NEA barrels that come in 10.5" and 12.5". Is there any way you could import a barrel or would it be too much of a hassle at that point?
>>30203838
11.5" in general is pretty odd IRG does the odd colt govt profile order every once and a while. Arms east also used to carry them you can try them Questar and CTCS to see if they can special order.
>>30202103
>>CPC details their new platform for firearms reform
>http://calibremag.ca/cpc-convention-2016-firearms-policy-proposal/
This shit makes me happy. Hopefully Trudeau fucks up enough that the CPC get a strong minority and can fix that. I'm hoping for McKay to take charge.
Is a Norinco M305 a decent buy for someone that really only wants one rifle for dicking around with?
I've heard some horror stories about the headspace but not too many.
>>30204103
They're fun but there are better dicking around rifles. SKS comes first.
>>30204103
Yes
>>30204202
That's a sexy stock.
![m14scamo[1].jpg](https://i.imgur.com/m5R9PfL.jpg "m14scamo[1].jpg")
>>30204202
>>30204324
I went to P&S Militaria in person on Monday. Very tiny store, had some neat stuff. I saw pic related in person. Holy fuck, it's even uglier up close. I couldn't possibly buy it unless I had a stock ready to throw it into.
>>30204089
This is some good ass shit dude. If the Conservatives get re-elected would that mean we could be seeing some previously Prohib rifles becoming NR? Shit like PTR-91's and Veprs?
>>30204421
Its quite possible. There are a few caveats that the simple classification system may not be retroactive but I hope it is.
>>30204421
>>30204434
Apparently the plan is as follows:
Prohib=Full auto
Restricted=Handguns, rifles and shotguns under 26" OAL
NR=Everything else
This would mean that AKs and the like would become NR, and FALs would be back on the market. As well, it could also mean that converted FA guns could become R or NR depending on exactly how "full auto" remains defined in the Criminal Code.
>>30204496
>AKs become NR
P l s
>>30204496
Fuck man, Depend on how Bills E-111 and C-230 we could try to organize a petition to that Firearms policy instated.(If that's even a possibility. I don't know a whole lot about Politics)
>>30204152
Chinese or Russian?
>>30204565
Yugo, if you can find it.
>>30204496
>NR=Everything else
>This would mean that AKs
MAXIMUM DOUBT!!! The news would be all over the CPC about letting evil baby killing rifles that shoot cop killer bullets. They would likely stand no chance in the next elections.
>>30204550
E-111 is a petition. The government isn't formally obliged to change a thing regarding it.
C-230 works within the current law, and would be mildly helpful, but wouldn't change a ton.
The policy in question belongs to the Conservative Party. It isn't law. It isn't a bill. It's a campaign promise for if they come into power.
>>30204593
Feel free to check out the CPC website and the article sourced in the OP. And it's not like anyone really knows or cares how the law works in Canada. We can already get AKs.
>>30204565
I got a Russian one as a Graduation present a year ago, It shoots really well for a 65 year old rifle. I can't comment on the quality of the Chinese ones but if they're as good as the Russian ones then it would just depend on the look I guess. Russian ones have a regular Bayonet and the Chinese ones have a Spike bayonet, Although I think the Yugo ones look the coolest.
>>30204608
russian is best
whats the point of the arbitrary 4.2 inch barrel? is it like our 18.5 inch shotgun barrels? Why cant you canucks have snubs and turn them into the chief mounty because the prime minister is on his ass?
>>30204565
Both are good russian a generally cheaper and more available and later with chrome barrels are better.
>>30204603
I'm not saying I doubt they said that, they also said they'd repeal the firearms act too. I just think they're lying. Those AKs are also few and far between and expensive, unless you mean that massive unguarded border with a country that sells AKs. Then yeah I guess we could already get AKs.
>>30204603
The Finnish ones are a ridiculous amount of money though, What about Ak's for the poor man?
>>30204694
Like I said. It's a campaign promise. Quite frankly I think they'd actually follow through on this one, but that's just me. They had overwhelming support for the policy at their convention, I think only 3 people dissented out of hundreds.
>>30204726
SKS, VZ58, Type 81. I know they aren't AKs, but they are very similar in all but their action.
>>30204726
>>30204737
>>30204737
vz58's and type 81's are about 1 grand. Not exactly a great deal, but it's not like we have very many options for NR 7.62x39 rifles.
>>30204737
I've been told to Stay away from Vz58's from a bunch of fudds my Dad's friends with. I figure their full of shit but I'm gonna start saving up for possibility of NR AR-15's and then wait until C-230 to figure out Plan B.
If the Conservatives followed through with this policy I'd probably ask my Polish friend to help me import a Tantal or something.
>>30204780
It's about the same price as the US for a good AK, though they do have a bunch of cheaper models. If we were getting them from Russia and China I wouldn't expect them to be much cheaper.
>>30204800
Why would they say that? I have a VZ58 and it's great. They had some issues with the .223 models manufactured between 2012 and 2013 but other than that they're really solid and pretty accurate.
>>30204765
Should add our not prohibited prohibited style sks (Valmet or type81)
>>30204815
He didn't elaborate on what they said, but he seems to have this lingering Bias to towards anything from Eastern Europe for some reason. He didn't even want me to get an SKS at first until I made him take me to Silverdale to shoot one of the rental ones.
Motherfucker's gonna make me fly him to another country to shoot an AK before he lets me buy one probably.
>>30204765
shhh you dont know that
>>30204846
Sounds more like a personal bias than any actual issues with the guns themselves. He probably just hates Eastern Europe. He could also just dislike anything other than fudd guns.
Also >Asking parents permission to buy guns.
>>30204883
It's more of a their house, apparently they own the real estate of MY gun cabinet. Most of the fudds in my family seem to think all I need is a shotgun, and something that shoots .30-06 because "I don't need baby killers". Is it possible to be anti gun and own a gun at the same time?
>>30204918
Yes; it's the reason why retards keep making things like this.
>>30204496
My god, all we need now is to pray Trudeau can't import enough of his refugee voters to offset the amount of people who realized they made a terrible mistake.
>>30202819
Zarya a CUTE!!
>>30204937
I'm sorry, I think I just had a stroke looking at that thing. What is it?
>>30204918
>Is it possible to be anti gun and own a gun at the same time?
Yeah apparently you live with those people. Just letting you know now, they will throw you, and anyone else who owns guns, under the bus the moment anything anti gun happens. I recommend you move out if you can, then buy scary assault style weapons and flaunt them.
>>30204937
/r/ing the Pinball Wizard pasta
>>30204918
>Is it possible to be anti gun and own a gun at the same time?
That's basically what a fudd is
A fudd isn't just someone who enjoys good old fashion bolt guns and doesn't personally feel like he needs or wants anything modern, a fudd is a person who believes that all people should only be allowed to have bolt guns.
They're our worst enemies because they're basically anti-gun but happen to have one bolt gun so all the other anti-gunners treat them like they're some kind of firearms experts.
>>30204973
My Step mom seems to be pretty chill about the gun stuff, She liked shooting it on our last range day, She's more worried about her kids getting their mitts on it one day that I'm at work or something.
And I'm slowly starting to work on my dad, I've turned myself from anti gun to pro gun, and gotten him to do the same. I should probably contextualize this with I'm almost a year graduated from highschool. He had to take the safety course with me or I'm sure I'd be the only gun guy in my immediate family.
>>30204962
Literally what it looks like. The gun uses a cartridge to fire a giant fucking pinball mounted on the end of the gun at an assailant, which will only shatter their bones instead of perforating them.
>>30205001
>Ever since I was a young man,
>I've shot the silver ball.
>From Baltimore and Ferguson
>I must of shot 'em all
>But I ain't seen nothin' like him
>In any riot at all
>That coked up black kid
>Sure takes a mean pin ball
>>30205111
That's sorta smart but don't they already make rubber bullets that do the same thing? and why does it have to have that obnoxious orange colour?
>>30205111
I smell a kickass new alternative to paintball!
>>30202786
Im trying to smoke out the other windsor anons , he was in the cabellas thread.
Im looking for a nice carmers fied to shoot at .. hrrmm the backstop any one make a portable one ?
>>30205166
At least people would call their damn hits with this.
>>30205030
Just make sure it's locked up safe in a cabinet. If your dad also has a license, you could make a show of giving him a key to the cabinet as well. Range trips always help, and try to go with the "don't prejudge guns" line, especially if they are left wing. You can work up with the whole racism but with guns angle.
>>30205007
>They're our worst enemies because they're basically anti-gun but happen to have one bolt gun so all the other anti-gunners treat them like they're some kind of firearms experts.
A thousand times this. Always some fucking potbellied, middle-aged NDP voter narrowing his pig-eyes at you and interjecting "YEW DUN NEED THAT FER HUNTIN DURR".
I've got enough of them in my extended family as it is.
>North Sylva still, STILL hasn't got my T97 back to me yet, reeeeee
New toys, though! Dulls the pain a bit.
>>30205317
Post more of that knife. I love me some daggers.
>>30205317
Good luck with that your rifle is theirs now.
>>30205241
Every time that happens. Always overweight, always balding, usually middle aged and white. Would gladly use a muzzle loader if it meant getting rid of semi autos.
>>30205317
>North Sylva
You should've expected 2 year turn around times.
>>30205216
I've already done the first two things. Most of the time we have a discussion about what my next acquisition might be he interrupts me like an asshole with "Oh well So and so said this is a poop gun and I take his word for it so stick with this" or, and this one's what he said to me today about wood furniture on an Ar-15 "People don't think a gun is any more scary than another gun just because it's black".
I just wanted it to look nice like pic related.
>>30205338
You basically have to say that you've done your own research on the matter and you'll take X's opinion into account but you're getting what you want.
>Survivalist's rifle
>Chamber it in .50 beo
>>30205322
I aim to please.
>>30205362
Exactly what I was thinking, Down the line of course though.
Does anyone know what the Quality of Dominion Arms rifles are? If something happens with bill E-111 I'm thinking about getting one, and then using the money I save from not getting a hella expensive .223 rifle to drop it into some Wood furniture I'll stain Walnut.
>>30205329
>>30205336
I have an angry Fudd store owner on my side, though, since they have some of his crap, too. They claim it's being sent tonight. I'm gonna call tomorrow and snarl at them some more.
>>30205322
How about a Ross bayonet?
>>30205445
Or a C1 bayo?
>>30205420
DA rifles are rebranded Norinco. They're perfectly functional though they look rough. They'll still go bang every time though. Fun part of AR15s is that you can always switch out the parts you don't like down the line.
>And E-111 isn't a bill, it's a petition.
>>30205456
>>30205445
>>30205419
Is that a motherfucking CADPAT quilt?
>>30205456
>>30204947
>musclegirls
muh dick
>>30205476
Fuck, I don't know why I keep thinking it's a bill. Hopefully it goes somewhere though.
would it be a good idea to get a DA lower and then stick a different upper on it like an 18" NEA? I figured having different brand parts might lead to some issues or something.
>>30205503
>Hopefully it goes somewhere though.
Hopefully Trudeau and the rest respond positively towards it, we will see by the end of the month.
>would it be a good idea to get a DA lower and then stick a different upper on it like an 18" NEA? I figured having different brand parts might lead to some issues or something.
Barring some odd proprietary configuration that I haven't heard of before, it'll work perfectly fine. Just understand that they'll probably have different shades of colouration, and different quality of finish. If you aren't happy with any given part you can also just replace it too.
>>30205317
>posting serial numbers of registered firearms while admitting your carry illegally and unpin your magazines without a care in the world
If anybody still doesn't believe Tok Guy is a cop, I've got a bridge to sell you.
>>30205550
Thats why none of you will come to a meet up cause ive already invited him
>>30205538
Couldn't I always just paint them the same colour afterwards? Just kinda spit balling ideas right now so that if anything happens I'll have a plan in mind. The as long as the Upper receiver works well and a round discharges with each trigger pull I'm happy.
>>30205634
It should be fine. AR15s are considered lego guns for a reason. They've been made for decades now, you can switch it around as you like.
>>30205600
I'd go to a meet up .im str8 edge so idc
>>30205663
Sweetness, That's the only reason I'd rather get one before I buy an AK or knock off AK. At least until getting a Tantal becomes more than a bucket list item.
>>30205550
It's blurry enough. Besides,
>"The stories and information posted here are artistic works of fiction and falsehood. Only a fool would take anything posted here as fact."
:^)
>>30205600
I'll pass, anyway. I'm too busy. Normally I do go to AB meets when I can (many have likely met me already), but working hard to get my Class 1.
>>30205697
>At least until getting a Tantal becomes more than a bucket list item.
I will never EVER forgive Tactical Imports for giving us hope.
>>30205712
Theres no specific date for it youre pretty much welcome to come shooting anytime, ill watch for your fat ass at seb
>>30205715
I must not have been old enough to know about that happening. They were gonna try importing them?
>>30205789
H-hey, I'm not fat.
Where do you guys meet again? I normally go up past Westlock or down to Wildwood. When I get my Iltis, you'll find me at Wildwood a lot more, camping every other weekend.
>>30205712
Are there any meets in ON?
>>30206304
There are definitely people interested, but we need someone to take charge.
>>30206322
I'm currently Noguns with knowledge of guns so i'm not that person I'm looking to get my PAL and RPAL written this year. I was just seeing if there was an active group i could learn under / shoot with when i got certed.
>>30206383
If you live near Ottawa I'd go shooting with you. I just don't know of any spots except for the Stittsville range and that's pricey.
This >>30206322
Ontario is a huge province and it seems like half are located in the GTA, half in Ottawa and surrounding areas, and a few north bay and other outing areas.
It would probably be easier to organize a meet for south/north areas just due to the amount of travel necessary.
>>30206400
>>30206396
I'm Close by to the GTA currently but i travel to The Ottawa region to see friends and go /Out/ Camping/ Canoeing so shooting could easily be added to that list
Question. Bought a CZ858 in .223. Now was it the CZ or VZ .223 that had the over gas problem?
>>30206565
CZ's have the problems but only a few from 2013 or 2014 cant remember which year
>>30205836
Genesee
>>30206416
If you could arrange a spot to go shooting near Ottawa I'd join up. I'd love to get a chance to meet some fellow /k/ommandoes again, and to find a place I can go regularly.
Are NCStar products as bad as people say they are?
According to the status webpage, my PAL/RPAL has been issued.
Does that mean the application process is finished and the licence is in the mail? Or is there another step involving the provincial CFO?
Are there any reasons that you can be rejected for a PAL?
I don't have a criminal record of any kind, I've never been suspended from school, I've always distanced myself from dark people, I worked with the cops, I'm in higher education. Basically I'm a good boy who dindu nuffin and am trying to get a start on life.
But, I live in toronto, am a paki [legal] immigrant, and have said a lot of shit online and irl.
>>30209898
The RCMP isn't omnipresent, they won't look through your Facebook comments. They are primarily concerned about your criminal, domestic, and mental history.
Answer all of the questions truthfully. Even if you have to answer "yes" to one of the personal history questions, that doesn't mean you will be denied.
>>30209898
Make sure to get references who won't joke around during the call. Tell them to answer every question completely seriously and with no "haha i dunno he might shoot up a school or something lol!"
>>30209941
What I'm trying to say is the RCMP will not reject you arbitrarily.
Good luck.
>>30209944
Shit references, that may be a problem. I have 2 friends, one has a mental health history.
Who qualifies for a reference? What questions would they ask? Actually I'll guess I'll look it up.
Thanks.
>>30209959
I hope not. Thanks.
>>30209982
I'll ask my friend, but in the case for both me and my friend, the RCMP only called one of our references (still gotta provide 2). They need to have known you for like 5 years or something.
Questions will be along the lines of "Does anon have a history of violence?" or "Would you trust anon with a firearm?" and stuff like that.
All answers should be super straight "No, sir, anon is a very kind person" and "Yes, absolutely."
>>30209982
Just look at the application.
>>30210027
OK, thanks.
>>30210039
Yea I just read it up, seems I can even use parents.
How far out of Toronto would i find some general purpose land to shoot on?
I really don't mind turning it into a camping trip, so a couple hours drive is fine by me. Would just need a can of gas in the back.
>Inb4 dangerous
I know, but rather have a backup.
>>30209686
Yes its in the mail, no you don't have to do anything with the provincial CFO.
Some provinces are assholes about buying Restricted firearms without a range membership so you may need to send them a copy of your range membership but I don't know which provinces do this.
>>30210843
I agree with you . Dont try to buy anything unless you have the PAL in your mitts .
As for restricted , C42 eliminated the need to be a member at a range. I bought my TT33 , it took a week for the transfer to come in. Then after i became a member at a range.
If you do it this way you will be sent a seconf RPAL , with your non-standard ATT conditions attached
>>30206565
Honestly I kind of regret not getting a .223 version of the VZ so I could use a magwell adapter and beowulf/LAR-15 mags with it.
Hell, now that the Ukrainian commercial ammo has dried up non-corrosive 7.62x39 isn't even as cost effective as it was.
>>30210935
You can still find crates of 1440 rounds of x39 corrosive for $300-350 if you look enough. I'd expect the Ukrainian ammo to slowly start coming back once the whole "Russian invasion" thing is over.
>>30210970
Honestly I'm not a big fan of corrosive, it's not that I'm to lazy to clean, it's just that everything gets to fucking dirty with the hot water method compared to good ol' ballistol (and when the fuck are gunstores gonna start regularly stocking ballistol in this damn country? Ever since I tried it out I never want to go back to any other product)
>>30211001
You don't need to use hot water, it's just recommended to loosen the salts. I stick with CLP onsite, nitro solvent to actually clean, and then a coating of CLP again after the patches come out clean. Even using moderate quality Outers brand stuff I've had good results and no corrosion on my VZ58.
>I also recall it being possible to bulk order ballistol online somewhere
Is a 28 inch 12 gauge shotgun with a modified choke accurate enough for bear hunting/defense using slugs? I already know that the modified choke can fire slugs because I looked it up and tried it out. The accuracy was bad but I'm not sure if it was because of the choke or because of my cityboipussified arms.
I got some 2 3/4 inch slugs and 3 inch slugs, both of which the shotgun accepts (rated for 2 3/4 and 3 in), but the long barrel and modified choke was most likely designed for the intention of long range waterfowl huntin.
>Anon just buy a 18.5 inch barrel with a cylinder bore!
I don't want to buy more stuff!
>>30211123
Anon buy a hacksaw and chop that fucker legal to 18" but restricted if semi auto and less than 18.5"
>>30206646
Ah, really? Is there some Crown Land out that way? I usually avoid ranges, and prefer to shoot with friends on CL. I can do goofy/fun/illegal stuff out there and nobody is gonna be breathing down my neck, assuming there's still a reasonable amount of safe behaviour.
>>30205480
Woobie Blanket best blanket.
>>30205329
>>30205336
>Called NS today, FINALLY they ship it
>Should be here Friday
WAS THAT SO HARD?
>>30204041
>>30203980
needs to be 11.5" and lightweight, even pencil profile.
i've found a couple in the states, and i'm waiting to hear back from J&T if they'll actually sell me one.
del-ton makes one too, but i can't find any dealers here, and i would really like to do this without going through the whole third party import deal.
>>30211399
You can hear fudds shooting at the range from where we go,
>>30211620
So it is on CL? Well, you have my spare burner email, right? Send me the location and maybe I'll swing by sometime.
>Inb4 everyone starts bawling that abloohoo ebil Tok Guy is RCMP and we're gonna get raided
Almost new gun time, what does everyone think im stuck on Skorp, BHP, Lever shotgun, 1911-380, mp446
>>30203528
A lot of the product goes to the US first (even non-US makers), then gets shipped up here with all those stupid ITAR restrictions to contend with- adds a lot to the cost.
>>30211948
Which lever shotgun?
>>30211973
Corwins alder clone 14"
>>30211978
>>30204496
>Restricted=Handguns, rifles and shotguns under 26" OAL
Sounds dicey to me.
Aren't there a few legit NR longarms with <26" OAL?
>>30204565
Ideally: Russian metal, Chinese wood
Realistically: Russian
>>30212227
If they can be fired while under 660mm in length, they are considered restricted under current laws:
>a restricted firearm is:
>c. a firearm that is designed or adapted to be fired when reduced to a length of less than 660 mm by folding, telescoping or otherwise
>>30204883
>personal bias
Quite possible. I'm guilty of it myself
>tfw I refuse to buy Israeli or Turkish firearms
>>30212260
>>tfw I refuse to buy Israeli or Turkish firearms
I'm with you, I won't buy anything made south of France.
>>30204940
Thing is, if you actually sit down and have a chat with most non-white immigrants, you'll find that their viewpoints are more close to right-wing than left.
The only reason they would vote left-wing would be one of the following:
>they're very fucking young
>the left-wing candidate of their local riding is the same ethnicity as them
There is the possibility that they could vote for the Liberal candidate to show appreciation, but that would be kind of silly because every major party had a plan to help refugees.
>>30212276
You're missing out on some nice Spanish pieces.
>>30212347
I would suggest they're more west of France, but I get what you're saying.
>I'd buy Spanish, but I never really see too much Spanish stuff floating around
Lol why do I need muh ex girlfriend's permission to own guns? FuckinCucknada lel
>>30205317
>>30205550
>>30205705
>AA_X314
I can't make out the third letter, but I suspect that it's a B, E, or F. The rest is more than legible, and that's more than enough to narrow a Glock 17 Gen 4 down to one owner in Alberta.
>Comments are owned by the Poster.
>>30212363
bbuuut annon , dont forget about polytechnique !
It was a WOMYN hater !
(pleat dont remember that the shooter was a musilmani )
>>30212360
There are some Spanish Mausers on a few sites like Collectors Source and SFRC, and Prophet River has some high end Spanish shotguns. TradeEx has Spanish shotguns and rifles from time to time. A lot of the postwar British Mausers sourced their actions from Santa Barbara.
>>30205480
If CTG is ex-military as he claims, it's not too unusual for him to have CADPAT swag.
>>30212363
Just don't mention it. Unless you tell them you were living with her, they probably won't ever know otherwise.
>>30212381
Neat, didn't know that.
>>30212363
What the fuck
Do canuck cucks really have it this bad?
>>30205538
>Hopefully Trudeau and the rest respond positively towards [the de-restriction of the AR-15], we will see by the end of the month.
>>30212037
Oh, my. That is very sexy.
>>30212369
Pls no bully senpai
>>30212381
Sebarms has/had an FR7. Really interesting little Spanish beast.
>>30210872
>C42 eliminated the need to be a member at a range
Not exactly true.
Whether a range/club membership is required or not is the provincial CFO's prerogative. The Ontario CFO doesn't give a shit about memberships. The BC CFO does in fact give a shit, at least from my experience.
>>30202819
I like soldier 76. He's a cool guy and doesn't afraid of these godamn kids.
>>30212438
shiieeeettt , sorry BC
I hear yall need a pal to even buy body armor :*(
>>30212400
References are required to get a license. Doesn't have to be an ex, though, and often they never call.
>>30212418
I still see updates on my Facebook feed about the proposal. I mean, it'd be nice, but I think there's a better chance of the Canucks winning the Stanley Cup than us getting NR ARs.
>>30204940
Mr Melvenheimer pls
>>30212363
To be specific, your conjugal partner.
If you never lived with your ex-girlfriend, or if it's been more than 2 years since you did, you don't even need to fill that section out.
>tfw single
>tfw still interested in dating
>tfw will never ever move in together, no matter how serious we get
>>30212458
>I hear yall need a pal to even buy body armor :*(
That's actually a plus for us.
Some other provinces require a specific permit to own body armor. From what I hear, it's about as difficult as obtaining an ATC (ie. next to impossible unless you have a legitimate use for it in your job).
I also hear that a few provinces don't allow it at all.
So, a PAL requirement? Thank you very much, at least I have a PAL.
>>30205317
CTG, if you arent popo I want to see you build that 303 svt into a scout rifle
>>30205419
Whats the crest right by the handle.
>>30212553
I will, I just have to hear back from SI about them releasing an SVT mount. Maybe they'll do a one-off if they can't. It's a bit long for a true """""Scout""""" build, but that's fine.
>>30212513
other provinces ? like which ones ? I know in Ont is neit prob
>>30212619
Ont there is no requirement for owning body armor.
>>30212624
there is ONE requirement ...... money ;^)
>>30212586
Cap badge. The knife is a BESH VP-100, if anybody wants one of their own.
>>30212633
If you're complaining about money on /k/ this is not a good hobby for you.
>>30212655
jajajaj , tru
funds = gunds
>>30212600
Do it, with pictures, then shitpost on CGN with it
>>30212635
Thats what I suspected. How long were you PPCLI
>>30212896
I'm not sure what that would accomplish, since Mohawks are uncommon, but around.
>>30212913
5 years. My passion has always been aviation, so I'm getting my Class 1 to save up for my pilot's license. I like driving, so it's something I can do as a career.
>>30213031
Neato, I'm a sigfag now but the trade has way too many autists to be enjoyable. I doubt I will be doing this for much longer
>>30213156
Always had respect for the siggies. Each trade has its place. I'm sure you'll find a way to pursue your passion and make a career of it.
>>30213218
Thanks dude, I'm sure I'll find somethjng nifty to do without a concentration of spergs. Fuck I want to buy a LSVW off of crown assets but I know how beat to fuck they are
>>30213271
I saw someone mention that before. Even in good shape, though, I dunno. They're pretty shit, even if they do look cool. Gonna pick up an Iltis myself as my next DD.
>>30211852
Im more worried about fish and game
>>30213321
Fair point.
>Our brave Boys in Off-Green stopped a ring of EVIL RAPIST POACHER SCUM from POACHING BAMBI yesterday RIGHT NEAR YOUR CITY
>The individuals all claimed they were there for a "meet", but those filthy poachers will say anything to save their hides.
Just kidding, we don't live in the Maritimes.
>>30213378
>maritimes
>the MARITIMEs
>giving a shit about wildlife on land
>not the sea
>>30213312
Turn the rad pod into a mobile hunting camp or making a wood box and turning it into a new brunswick woods truck. People in pet had a bunch that they would cruze in the woods in. I was allways jelly when they drove past me
>>30213525
Jelly of the iltis that is
>>30213393
Apparently you can't even target shoot, no matter how obvious it is, unless you are using the appropriate calibre for the hunting license that's currently in season that you possess.
>>30213545
I'd kill for a surplus Milan launcher to slap on it. Not sure what sort of getup I want, though.
>>30213594
Mount an mg34
Considering joining the military in combat arms, leaning towards armoured soldier. anyone have any tips or advice?
>>30213606
Get /fit/ and follow orders.
>>30213545
I saw an Iltis here at a autoshow held every Wednesday.
It was fucking radical in real life. Though its 75 hp engine is pretty pathetic.
>>30212434
Corwins alder shotgun clones are up for sale now way cheaper than I expected. Ended up being only 350 shipped so I bought it. Maybe I'll still get the mp446 depending on my paycheck.
>>30213769
Link to those? I checked their website and couldn't find them.
>>30213866
https://www.corwin-arms.com/product/warrior-lever-action-shotgun-14-inch-barrel-screw-chokes
https://www.corwin-arms.com/product/warrior-lever-action-shotgun-18%C2%A0inch-barrel-screw-chokes
https://www.corwin-arms.com/product/warrior-lever-action-shotgun-26%C2%A0inch-barrel-screw-chokes
>>30213881
Pretty neat except for the Turkish thing.
>>30213605
I could, if they weren't so pricey that I'd be nervous.
I'll likely make a thread looking for ideas when I get it.
>Inb4 I get pulled over and anally drilled for having a gun mounted on my car
>>30213756
I thought it was 84? I know some guy around here had a project Iltis with 210bhp.
>>30213924
My MPA is pretty good so I don't really have a bias. Plus all the funding terrorist false flagging IDGAF.
>>30213996
I understand they have decent quality, I just don't feel good giving money to the Turks. Long history of them being horrible human beings.
>>30211123
Slugs out of a smooth barrel are not very accurate. Anyhow, you should keep it under 100 yards. Plenty of people use slugs to hunt bears and such.
>>30213881
Just bought one. I really want to buy 3 and flip 2 in 4 months but I really don't want to be a scumfuck
>>30214104
Which one did you get, just out of curiosity.
>>30214018
To be fair, most of us buy Russian & German shit without batting an eyelid, and it's readily obvious what they did.
>>30213972
>I thought it was 84? I know some guy around here had a project Iltis with 210bhp.
Yea it's only 75 hp inline 4. Also 210 bhp with iltis is crazy, its like 95 slugs fully loaded, it's nothing. Anyway, this isn't really a fast car, it's better to get more torque into it, cos it's got a idle gear that you put the engine on idle, but it has so much torque it'l just climb over everything. It also has power nothing.
It's a NATO car for offroading, could probably do it better than a wrangler, but it's so bare bones you may as well add a bit more weight and thus features. Also the doors are removable and mount to the hood.
>>30214115
14" with intentions of getting a little longer barrel in the future
>>30214164
Yeah there was mention of multi-barrel packs later but they got delayed. May get a full barrel set if I like the gun.
>>30213881
Man, it's been a while since I've browsed Corwin, but their firearms selection has really gone full-Turk.
I remember when they used to have nuggets and SKSes like every store and its mother.
>>30214127
Perhaps. At least the Germans have repented, and the Russians, excepting the famine, had good reason to do what they did.
Does anyone know if the front sight on a norc m305 (18.5 model) is standard height?
I'm trying to get away from that damn canted muzzle brake/FS.
>>30214230
They specialize in russian/eastern european firearms and nothings coming out of russia/ukraine right now so what did you expect.
>>30214241
Should be standard height. Unless you have a NM rear sight.
>>30212363
>having girlfriends
haha, check this sex-haver out
all I need is my hands and my guns
>>30214913
>implying girlfriend = sex
I never had sex with my first two girlfriends.
Had a question: I just got my first pistol, a ruger 22/45 Lite, used. I took it out to shoot for the first time today, and had an issue.
I ran two different types of ammo, CCI Quiets, and a regular ol' box of federal. Now, I know that Quiets don't have the power to fully cycle the action, effectively making the gun into a bolt action when I used them, having to cycle each round manually. The problem is, sometimes it took more effort than usual to rack the slide back.
When I ran out of Quiet (I was mainly just trying to use up the last of the stuff), I moved on to the federal blue box stuff, which ran mostly fine. I did encounter the same issue, though, maybe 3 or 4 times, after firing a round, the gun seemed to cycle properly, but wouldn't chamber a round, when this happened, the slide again became hard to rack back, and I also couldn't engage the safety, but everything seemed to fine after racking the slide once. I'm not sure if it's the ammo, or the gun. I have yet to buy a cleaning kit for the thing, and ran it as is when I took from the store.
>>30215120
Probably just a bit gummed up from the store if I had to guess. Try it out again after cleaning and see if the issue persists.
>>30215163
I don't actually have any cleaning material since I've heard .22s are generally low maintenance. Are there any recommended cleaning kits/items?
>>30213972
Just put a trigger lock on it
>>30215179
22's are not low maintenance fuck half the 22lr ammo is dirty as fuck.
Probably better to get a starter kit one of the ones with brass rods vs steel.
The very basic you can get by with is...
Cleaner/Solvent and
22lr boresnake or
cleaning rod, 22lr brass brush, small jag and patches.
The benefit to cleaning rods is they have swappable parts for multiple calibers.
For boresnakes they are by bore diameter so a 22cal will do 22s/l/lr/m 223/556 etc and they tend to be simpler.
Pic related is Hoppes deluxe cleaning kit its a good starting kit.
>>30215179
Just get the cheapest all-in-one cleaning kit you can find at Walmart/Cambodian Tire/etc.
Ideally, get one with a rod, patch/brush, cleaning solvent, etc.
I wouldn't bother with higher end stuff until you know what you're doing. Yes, there is a considerable difference in price and quality, but they'll both get your shit clean. The cheaper stuff might take longer, but by god, it'll get you there.
>>30215238
>>30215248
The local gun shop has plenty of options. I'll just get a basic kit with a bore snake and solvent there. CLP seems to be one of the more popular choices for cleaning solvent, right? I think I saw that there.
I guess just learn how to take the gun apart, scrub out the insides with a brush, clean out the bore, and lightly oil the bore and internals?
>>30215326
CLP stands for "cleaning lubricating protecting" and is a catch-all for any oil that does all of the above. CLPs are produced from a bunch of different companies and typically aren't as good as specific products, such as a nitro solvent for cleaning then a lubricating oil afterwards, but are much easier to use. I wouldn't worry too much about it. Look up videos on youtube about how to disassemble your gun for extra help.
>>30215356
I watched a video from ruger, where it shows the gun fully disassembled, the dude ran the bore rod through a few times with a patch to clean it out, and then again with a patch with a light coat of CLP, then scrubbed out the guts with a toothbrush before lightly coating it with CLP. Seems fairly straightforward.
>>30215382
Yeah, that's pretty much it. The important part is to get into all the nooks and crannies and actually disassembling the gun. Some of them can be pretty tricky to do.
>>30215403
Yeah, it looks like a pain in the ass from all I've seen, but I guess it's one of those things that gets easier the more you do it.
>>30215423
It's all about practice. Once you do it a few times you'll get the hang of it. By the way, congratulations on your new gun.
>>30215439
Thanks for the help.
>>30205317
Are you seriously gonna CC such a big gun?
>Been dreaming of a Vz.58
>Hate the long NR barrel
>Don't like being on a registry to have nice things
What should I do? Cut the barrel and slap on a new front sight assembly? Or just nut up and buy a Restricted version? It's not like you can do easy barrel swaps.
>>30216187
Depends if you can do the work properly yourself as I doubt you'll find a gunsmith to do it for you.
As for the front sight i think its just pinned which means you could knock it off and move it back.
>>30215326
Honestly I rarely do a proper cleaning of my Buckmark just because it's such a pain to take down compared to my other guns, which get completely cleaned and oiled after every range trip.
Same for the 10/22, I fucking hate dealing with those internals
One more issue I just remembered with my 22/45 actually, sometimes the mags pop out when I hit the slide release, and the mags don't drop free from the gun, they'll pop out a bit but I have to pull them out. I googled a bit and it sounds like the spring seat could be the issue of the mags and the hard to pull bolt... Does that sound possible?
>tfw humidity in Edmonton is 94% tonight
Oh sweat Jesus I need to buy a dehumidifier for my gun safe, my poor girls.
>>30216217
I could probably find a smith or two I know that would keep quiet, I'm just curious if it's feasible, or if it's a bad idea/could damage something.
>>30212460
I would go as far to say better chance of the Leafs winning it...
>>30216886
Oil the piss out them, what are you? A faggot?
>>30216187
If you want a 16in looking barrel do what >>30216217 says in bring the sight back 2 inches then put a fake muzzle break over the rest of barrel or something
>>30217765
No, in this case, there actually is a chance.
>>30218092
Not a bad idea. Might consider that when I get a Vz. Wonder how hard it is to get the whole front sight assembly off.
>>30216165
Yes, but not for a while.
>Calling the CFO to complete a transfer
>Put on hold
>"THANK YOU FOR BEING A RESPONSIBLE FIREARM OWNER"
>
>>30216187
>tfw you kinda like the look of the folding stock VZ's
>tfw you know it would look stupid with the fuckhuge barrel
What's /k/ opinion on Firearm Outlet Canada in Ajax?
It seems to have good google reviews, and the website is pretty nice.
I usually go to alflahertys, but FOC seems to have a much better selection. I usually order online, but i want to support firearm businesses.
>>30216187
Cutting of the barrel would make it a prohib.
You cannot also use a 16" barrel with muzzle brake to make 18.5". The entire length must be rifled to count as the measured part of the barrel.
>>30205480
it's a ranger blanket, or a woobie if you're American.
>>30221148
Just get the best price.
>>30221192
I know the rules, I just don't wanna be on some registry, but I'd like to plink innawoods with a shorter Vz.58.
>>30221351
just lie to your self , saying you like the wood stock
>>30218957
>"Due to recent changes in the law, you are no longer required to register Non-Restricted Firearms"
Gee, thanks, I didn't know.
>>30219645
It's not that bad, it really isn't.
Just don't compare the two and it doesn't seem nearly as bad.
>>30216886
If you can't get a dehumidifier right away for some reason, you can always throw some moisture absorbing material in there.
Sand, sawdust, salt, rice, just dump that shit in there until you get a more permanent solution.
I would recommend the rice, as it will be easier to clean up. Also, you can find them in porous bags in Chinese/Indian supermarkets, so you wouldn't even have to open it. I wouldn't recommend eating the rice after you're done, unless you enjoy cosmoline-scented rice.
http://www.cbc.ca/news/canada/montreal/quebec-gun-control-registry-bill-64-1.3625425 Quebec will now have a gun registery
Jesus H, McSweeney's is the worst beef jerky I've had the displeasure of eating.
>>30221833
came here to post this
sorry, Quebecbros. a loss of your rights means a loss for us all. hopefully with time this wasteful and useless registry will show itself to be the failure everyone with a brain already knows it to be and will be dropped by a future gov't. all we can do is educate our neighbors and friends and lobby the politicians
>>30221833
C'est avec émotion que j'apprends le deuil qui vous frappe tout d'un coup et je tiens à ce que vous soyez assuré de ma chaleureuse sympathie.
> F
>>30216187
>>30216217
inadvisable to do it, for obvious reasons of breaking the law + you're unlikely to find a smith that will break the law for however much you'd be willing to pay him
>and remember, you still break the law for simply having it in your possession after, even if you didn't do the work
besides, don't the restricted 11.8" and the non-restricted 18.5" have different gas port size? cutting the barrel will make you a criminal, while still not being enough to make the short version function right; and the likelihood of you fucking up the gas port/bore while trying to drill that yourself is even greater than in the cutting the barrel
>tl;dr: don't do it -- you are going to break the law for sure and most likely break your rifle at the same time.
instead, stay legal and buy the restricted version if you want shortie VZ that badly.
or if your primary want is just for compact package that's NR, buy T97 or Tavor instead
>>30222156
20% of guns registered at most with three to four times cost overruns. Mark my words.
>>30216187
Remove front sight and muzzle brake. Long barrel looks good without sight or brake.
>>30221729
couple questions for that setup:
can you still use iron sights with that mount?
how easy/comfortable is it to shoot the metal folder with that relatively high optic?
>>30222771
I have to chin weld but it' still fine.
There are two side mount heights, low and high.
I need to get new screws that aren't so long so I can use the mount without the spacer so I have the low mount right now. With the low mount you cannot see the sights. High you can.
>>30222921
Can you remove the dust cover and bolt with the mount still on or do I have to use the QD lever? I have a high mount and assumed the low mount wouldn't require a chin weld. I guess it still sits pretty damn high. I'm using a Blackhawk rifle cheek pad to get a proper cheek weld.
>>30222955
Unfortunately you must remove the mount to clean. What's nice is it all keeps zero. I can't speak for other mounts but mine is extremely high tolerance.
Is there any plan bring a non-restricted X95 Tavor to Canada? The barrel would need to be at least 19" to meet the overall NR length of 26"
>>30217303
Yeah most gunsmith can cut and crown a barrel and move the front sight so long as you don't push it so far back you need to move the gas tube.
>>30222630
The 11.8" has a different gas system due to the extremely short barrel length but the 16"/18.5" have the same.
>>30223745
>2.5" barrel difference
is it really worth getting 8"-12" of bbc in prison tho?
Woah buddy, that a depinned mag?
>>30224119
Information isn't illegal and the original poster already stated he doesn't care.
>>30221688
At least the AB CFO reps work fairly quick. Hell, I paid for my old Skorp on a Friday, got impatient, call 2 hrs later, the guy was pleasant and simply rammed the transfer clearance through as we chatted, I went back to the store and took it home.
>>30224154
the rivet fell out officer i swear thats why i put it under the floorboards so noone could accidentally fire more than 5 rounds
>>30221729
It totally is, come on. That being said, slap some wood furntire, proper bipod on there and a drum mag, and you'd have a sweet RPK style build.
I still enjoy shooting it, though. Bring it next time, and we can try pic related on it if you like. It'd probably offer a proper cheek weld for ya.
>>30224280
Man, I just can't 4chan today.
>>30221729
Also, I got some good old Gunfighter targets, we'll have to have a bit of friendly competition once I dig my target holders out of the box I shoved them in.
>>30212318
>you'll find that their viewpoints are more close to right-wing than left.
EXCEPT for the fact that they are immigrants, and that ultimately they are not part of this country so they don't give much of a shit about it.
This ofc ignores the 50% of immigrants who are women, and also the large fraction who are below the age of 30
