Why dont you own steel targets yet edition.
Old Thread
>>30055704
>>30060668
i do
I actually just ordered a silhouette from RMP. I used to shoot at a manhole cover hung from a tree but that thing was a bitch to take to/from the land I shoot at, that fucker weighs like 250 pounds.
>>30060723
Kind of a big ass target too, and is the metal safe to shoot on?
>>30060730
I'm pretty sure it's cast iron, the closest I ever shot at it was like 25 yards with a nugget and it was always angled down because of how I hang it in the tree.
>>30060723
Doubles as cardio workout.
traffic is gay
>>30060745
Probably a better idea, but I would buy a couple sets of these targets instead, theyre $120 shipped for 2 and only weigh 21lbs a piece rather than 250
>mfw the only two ranges by me are indoors
>mfw I no woods to go inna
>mfw if I want to shoot over 100yds, I have to drive 2+ hours one way
>mfw I haven't made steel ring since last October
I'm rdy 2 die
>>30060769
I probably will buy a few more if I end up liking it. Is yours also from RMP?
>>30060780
>no innawoods
why live
>>30060784
Nah, ar500 target solutions off of amazon. great price and really fast shipping. make sure to buy a can or 2 of orange spray paint
>>30060668
I want to get some steel, I just haven't got around to it.
Because I haven't come across any plate steel yet. I do from time to time so I refuse to buy steel targets. I'll cut my own.
Is there a better combat optic than the ACOG?
>>30060668
>Why don't you own a .338 Lapua yet edition.
>>30060991
ELCAN
L
C
A
N
>>30061116
Heavy and a half a gorillion dollars but it does look p nice, senpai. Ever used one?
in
steel plates when I move somewhere I can shoot them regularly, for now old bottles filled with water are pretty fun.
>>30060991
If you don't want a magnified optic then go with any aim point.
>>30061170
I have an aimpoint now but it's not as accurate as I'd like. Probably has more to do with the person pulling the trigger though.
>>30061297
I considered an ACOG for a bit but then realized it's only benefit was toughness, everything else was mediocre
I think I'd rather have an accupower
Which geissele trigger is the best for an HD/ range gun?
Just ordered this, getting sick of hauling around an upper with a heavy profile barrel, a Troy Alpha rail (inb4 >troy) and a Vortex Viper 1-4.
>>30061297
>more to do with the person
Yes it is. you could take any piece of shit AR 15 from a bottom rate pawn shop any where in the country and it will out perform the average shooter. Keep the Aimpoint and put more money into ammo. Focus of your sight picture, your trigger squeeze, and sight picture. You'll get there man.
>>30061316
I looked into the accupower too but is it as durable? I put my gun through a lot
>>30061350
I just bought 1k plinking rounds but I work 80 hour weeks. I need to just go and really sit down and shoot a few hundred rounds at an actual target. How do you feel about the accupower
Rate rifle please
Its not piston btw
>>30060745
You can shoot steel from pistol calibers from 7, at least that's the closest I usually shoot from.
Occasional shrapnel but completely harmless if you're wearing earpro
>>30061415
*Eyepro
But you should still be wearing earpro
>>30061395
>rate my rifle please
barrel looks neat
don't like the handguard but if you're happy with it then great
>not piston btw
good
>>30061317
Help plox
>>30061456
G2S for the jew
SSA for the richboy
or SD-C
>>30061456
SD3G.
>>30061362
I like red dots more than those anyways, only reason I see to get a powered optic is if you are needing to go out to 300m constantly
I can't decide what optic I'm getting, it's really insane the amount of choices there are.
>>30061456
Mbt
>>30060668
I do though. Getting close to 2 grand worth of steel and target holders. Hoping to do some steel challenge this weekend out back.
Memorial day sales are starting to hit.
PSA already hitting
http://palmettostatearmory.com/psa-16-mid-length-5-56-nato-1-7-phosphate-sr15-upper-no-bcg-or-ch.html
sr-15 guys
>>30061167
Buy some knock down targets. They are a good challenge with a pistol and great for ranged rifle.
>>30061558
Not KAC SR15 you ratard
Its the name of the PSA rail system
>>30061011
I really want to, got to put 2 mags through one the other weekend
>>30061131
Theyre decent, but its hard to justify 2.3 grand on one
>>30061534
got a back yard range?
rate my rifles
>>30061316
fov is bretty good if you can stomach the shit eye relief distance
>>30061589
God damn but that was fun to shoot.
>>30061579
>The guy who owns an sr-15 doesn't know what an sr-15 looks like
>>30061589
>got a back yard range
Yup. Got tired of the fudd range not wanting to have cool shit like that so I just bought everything myself for myself. I have just enough to do all the stages one at a time.
>>30061534
So you bought 1 Larue sniper target?
>>30061625
What the fuck are you talking about?
SR-15 RIFLE
or SR-15 RAIL SYSTEM
Very different. The link was not a KAC SR-15 Rifle.... it was a PSA with their SR15 Rail System
>>30061637
why are you so mad, that rail is prob better than a kac anyways
>>30061634
Kek
I just have enough for steel challenge, a couple of idpa targets, and a bunch of knockdown targets. Oh, and a whirly-gig.
Any reason not to get the psa 9mm bullet lower that's on sale to start my build?
>>30061597
basic/10
>>30061673
It's not a Quarter Circle 10 9mm lower.
>>30061666
Nice digitals
I really should get some more targets, just have a 12x20 chest and two 6'' gongs.
Then when I go to buy more I realize I also need and MRO. And a reloading setup. And a chest rig w plates. And another AR. And a FAL. And a can or 3.
Why did I pick this expensive ass hobby.
>>30061694
even muh 300blk pistol? Needs stamps
>>30061721
Once I finish out my ar-15 and buy a USP tactical I think I'm done for a while, I have other things to focus on at the moment and spending all my time into this has got me off track a bit I think
>>30060668
Maybe you should worry less about people having steel targets and concentrate on the steel in your mower blade. Your lawn looks like shit, get that fucker sharpened.
>>30061721
Knock downs are cheap enough if you buy them off Amazon. And I don't mean those tall things, I mean circles, squares, and bottles.
in 20 mins gonna pull the trigger on a PSA upper
help me arg, im too indecisive
PSA 11.5" 5.56 NATO 1/7 9"M-LOK STAINLESS FREEDOM UPPER
or
PSA 16" Mid-length Stainless Heavy 5.56 NATO 1/8 13" Hybrid Upper
You decide
Why do people say PSA is colt level quality? Is there truth to that?
>>30061831
my vote for 16 also
Does anyone have any experience with the LWRC piston guns? I'm looking at a Six8 and wondered if anyone had handled one of those or the 5.56 piston gun they make.
>>30061695
But for more than twice as much. Why should I spend some much money besides aesthetics?
>>30061831
Get the 16
>>30061859
>>30061841
would a bolt and charging handle sway your mind?
>>30061892
I assume the PSA lower is a magblock one. Colt or Glock mags? Either way, a lower designed to feed with those mags is better than one with a magblock stuffed into it, and will feed more reliably.
>>30061907
No, you asked
16
>>30061908
http://palmettostatearmory.com/psa-billet-9mm-lower-w-mag-catch-assembly-and-ejector-1.html
>>30061887
My old man has a lwrc REPR, which is 762. Is there anything you want to know in particular?
>>30061927
done
>>30061966
Good.
>>30060668
>2016
>Using the steel Jew as a target
>>30061935
Actually, that looks pretty good. Disregard what I said earlier, go for it.
>>30061954
Just wanted to know how their piston seems to handle when compared to a similar DI rifle.
>>30061597
Cute but short range
Would operate at 200yd
>>30061887
KAC>LWRC
>>30062061
what
>>30062101
I didn't stutter nigger
>>30062106
no, you just said something retarded that didn't make any sense at all
>>30062071
Thanks dude, I will, now just need to find an ffl
Just bought pic related yesterday. I have an Anderson upper that already has a free float handguard on it but I find it bulky and harder to add on accessories and I prefer the mlok system. How hard is it to switch this out? I know the one I bought is coming with a barrel nut.
>>30062230
>>30062247
What my upper looks like now
>>30062247
It's ezpz
>>30062247
are you arming the ants?
>>30062260
Do I need an armorors tool or nah?
>>30061395
>A2
>FDE grip and stock, black errything else
>handguard doesn't go to muzzle
7/10. Barrel looks p. neat and good choice of irons.
>>30061456
SD-E will do literally everything well. Short reset, no takeup, clean light break, flat trigger enables you to get way down on it for very controlled precision shooting or way up on it for hosing things.
![WP_20160525_004[1].jpg](https://i.imgur.com/Yprrv0H.jpg "WP_20160525_004[1].jpg")
Hasty pics with the new upper installed.
>>30062339
Between that and the mbt which is worth the money more?
![WP_20160525_001[1].jpg](https://i.imgur.com/UFJtxVG.jpg "WP_20160525_001[1].jpg")
>>30062364
If you can't wait and would actually pay $200 for the MBT, the SD-E is the better value. If you're willing to wait however-the-fuck-long for the $124 MBT, it becomes harder to decide.
I really, REALLY prefer flat triggers, and the SD-E has a significantly lower pull weight (I have two, my pull gauge has one at 3.1lbs and the other at 3.4lbs, the MBT is advertised as 4.5lbs).
>>30060668
steel master race
>>30062392
I need those nip-camo pants, wtc
>>30062370
There he is. There he goes again. Look, everyone! He posted it once again! Isn’t he just the funniest guy around?! Oh my God.
I can almost see your pathetic massively overweight frame glowing in the dark, lit by your Underage goat covered computer screen which is the only source of light in your room, giggling like a girl as you once again type your little /ARG/ post up and fill in the captcha. Or maybe you don’t even fill in the captcha. Maybe you’re such a disgusting NEET that you actually paid for a 4chan pass, so you just choose the picture. Oh, and we all know the picture. The “epic” smiling goat child, isn’t it? I imagine you little shit laughing so hard as you click it that you drop your corn chips on the floor, but it’s ok, your mother will clean it up in the morning. Oh, that’s right. Did I fail to mention? You live with your mother. You are a fat fucking fuckup, she’s probably so sick of you already. So sick of having to hear about undertale from you all goddamn day, every day, for a grown man who spends all his time on 4chan posting about a goat. Just imagine this. She had you, and then she thought you were gonna be a scientist or an astronaut or something grand, and then you became a shitposter. A pathetic goatfag shitposter. She probably cries herself to sleep everyday thinking about how bad it is and how she wishes she could just disappear. She can’t even try to talk with you because all you say is “Where is your Ar?". You’ve become a parody of your own self. And that’s all you are. A sad little man laughing in the dark by himself as he prepares to indulge in the same old dance that he’s done a million times now. And that’s all you’ll ever be.
>>30062370
man that NDS forge mark is pretty ugly isn't it
>>30061011
Because it's a stupid investment not worthy of praise. 50 hits harder, further, and a hell of a lot cheaper. You can't even handload the stuff cheap. And even then you'll be loading on a dedicated press. I built a 338 lapua a few years ago and it was one of the worst fun related financial decisions yet.
>>30062406
mmm, copypasta
>>30062339
Thanks comrade, what site do you use to buy your triggers from?
>>30062444
I buy them locally because a shop near me gives a 20% military discount.
>>30062453
Ohh nice, i unfortunately don't qualify for that lol, but there is a shop around here that stocks them
>>30062462
See if they have any installed in a receiver to test out. All the G's are good, finding the one that's right for you though is personal preference.
Primary Arms runs sales pretty frequently. I almost bought a third SD-E from them during their Easter sale for $195ish because my shop was sold out.
>ended up buying an SD-C locally for $180 after tax
>>30062407
Not as ugly as that trigger guard and bulging rear takedown pin. :^
>>30062406
See pic
>>30062495
>bulging rear takedown pin.
you know it's from a parts kit right?
that's as authentic as it gets
too bad they crush the trigger guards along with the recievers
>>30062525
All I'm seeing is a rear takedown pin not going in all the way famalamadingdong.
>>30062540
yeah it does
anyway i fixed my trigger guard like i said i would
![WP_20160524_013[1].jpg](https://i.imgur.com/pR5gv1P.jpg "WP_20160524_013[1].jpg")
>>30062555
You're a sick, sick man
>>30062558
That is some shit-tier cropping yo.
Every true American owns an M1 and an AR15.
>>30062581
You're definitely the expert on "shit-tier".
>>30062636
>owning a canadian gun
![WP_20151213_007[1].jpg](https://i.imgur.com/NZ5rp8t.jpg "WP_20151213_007[1].jpg")
>>30062636
M1s with cast receivers don't count, of course.
>>30062646
Why don't you take some classes or something mang?
>>30062636
I don't have an M1 yet.
>military issue Win 1895? Yep
>Military issue Krag? Yep
>Military issue 03 Springfield? Yep
>Military issue m1917 Enfield? Yep
--no fucking ping machine
>Correct-looking M1A? Yep
I'm missing a trapdoor springfield, an M16A1, and an M16A4 clone and I'll have every cartridge rifle the US military has used.
>>30062661
Me taking classes isn't going to make you any less of a stupid, human piece of shit.
>>30062555
>>30062495
Can we stop the pissing match? Both of those rifles are cool as shit.
Here is mine in its final form, sans Vortex Razor 1-6 that will be coming next month. I'd love one of those Geissele SOPMOD mounts but honestly I'll probably just get a Larue. Going to get a Geissele scout light mount for the MK8 rail when it comes out as well so my light doesn't get so fucking dirty. Unless that Arisaka mount isn't garbage.
After I get the scope, the next build is either going to be an AR10 or a 9mm AR. 9mm is cheap and the ballistics out of a, say, 10.5 inch barrel are impressive. 7.62x51 is my favorite round after getting a lot of trigger time on an M110 and a Mk. 14. I also have a crate of linked Lake City stashed away I got for free so there is a bonus.
I'm hugely tempted to just be patient and wait for QC10 to start producing their 10mm AR barrels and build around that. Maybe pair it up with a Glock 40 or 21. I don't have any idea of a timeline on that wait though.
![WP_20160525_007[1].jpg](https://i.imgur.com/I1Ejf6f.jpg "WP_20160525_007[1].jpg")
>>30062685
>Can we stop the pissing match?
No.
>>30062668
That is pretty fucking cool. One day I'll build that collection. I had planned to order a special grade M1 this summer but looks like that is on hold, unless they sell them at the stores. I could realistically drive to Ohio (5hrs) and buy one this timmer I guess.
>>30062647
American at heart motherfucker.
>>30062649
OG Nigga
>>30062668
Better fucking fix your shit before we nix your shit.
>>30062701
*summer...how the fuck does summer autocorrect to timmer?
>>30062705
>American at heart
So the Ted Cruz of American military rifles?
>>30062685
how is that pressure pad attached to the rail?
>>30062720
>>30062647
Reminder that he moved to Burgerland as a toddler, at a time when Canada did not have dual-citizenship. :^
>>30062750
That sounds familiar...
>>30062705
I can't fucking find a correct-grade Garand for under $2000 and the CMP has been out of them for years. All my other rifles (other than the AR clones) are parts-matching originals.
>>30062727
Magpul makes an mlok attachment specially for it.
https://www.midwayusa.com/product/174513/magpul-m-lok-tape-switch-mounting-plate-for-surefire-st-polymer-black
>>30062685
shut the fuck up
this doesn't concern you.
>>30062794
I got mine this year, it's not all matching, still a very nice rifle. I'm going to get a second one.
Or an M1A, I'm undecided.
>>30062800
If you're going to end a sentence with punctuation, at least capitalize the first word, bruh. Have a picture of this canine to assist in the removing of your wedgie.
>>30062807
M1A/M14's are fun, but lemme tell you as a guy who carried one in combat: They're pretty shitty fighting guns and really not that accurate even with M118LR.
>>30062397
they're TMC pants (airsoft) so don't expect top tier quality. I've been using mine pretty hard in the mud and thorns and they've been holding up fine. you can get em at shooter combat gear.
>>30062827
Crye originals pop up on ebay here and there for under $100 with the pads, but that isn't super common. I'd like to have a pair but we never used ours and had to turn them in. I had four pairs too.
>>30062816
years of posting and your the first faggot to whine at me about capitalization
really, i've been waiting for it
>>30062823
I plan on getting one mainly as a toy, but it COULD be a fighting rifle if I needed it. Unlikely given that I have rifles specifically for that, but you never know. I understand the problems with getting shit in the action, but other than that I feel confident about it.
>>30062847
You're*
>>30062841
crye doesn't have based type 2 jeitai though
>>30062850
Never had an issue with shit in the action. I carried a scoped, wood-stocked M14 for 14 months in Afghanistan.
My biggest complaints:
>heavy
>flash hider is bad at hiding flash
>even with a properly mounted, good scope I couldn't do better than 2.5 MOA with it in part due to being a just not very accurate design, and in part because it has a dogshit trigger
>COMPLETELY UNCONTROLLABLE on auto, even from a bipod. Yes, the one I had was old enough to be full-retard instead of burst. Yes, I tried it (not at an enemy at least).
>>30062866
Lucky for me that isn't a thing I care about. Not really into Japanese anything yet somehow I've been on 4chan for almost 10 years.
>>30062859
wow your so good at this
oh i did it again didn't i
>>30062868
>instead of burst
but m14s never were burst fire
and since when do m14s have shit triggers, that's like the one good thing on them
>>30062868
I wasn't planning on putting a piece of glass on mine. It was going to be an old world wood and iron queen.
>>30062280
Yes. Mine was only $35 and has a lifetime warranty, although I don't see it ever breaking cause it's fuck huge
>>30062887
Huh, thought later versions were 3-round burst. Troy did make a few that were burst instead of semi but those were LE contract guns and not military, according to wikipedia.
It has a decent trigger by military trigger standards. Hit has a shit trigger by precision rifle standards.
My AR>your AR
>>30060668
ur ar iz shit
itz shit
>>30063348
ur is shit lmao
Hey, like my AR? It's a DPMS.
>>30063386
>DPMS
>A2
>Barska optic
>what appears to be some faggot's belt instead of a sling
Only thing you got right in there is the mag
i hate gnats and skeeters
>>30063426
I hate you
>>30063416
It's a sling from a Savage made No4 Mk1 Enfield.
I picked up a variety of 20 round mags, some with Colt marked floor plates, but a majority have Universal International marked floor plates and mag bodies.
Except for 3 or 4, have 12 or 15, they all have aluminum followers.
>>30063500
>sling for syrupy Enfield
>some faggot's belt
Same thing.
I took new photos for you /arg/
>>30063550
Hawtt rifle, Hawtt waifu
10/10
>>30063550
That's nice
>>30063550
neat.jpg
On an unrelated note:
>the various +whatever baseplates available for Pmags, do they function properly with Pmag40's?
>>30063558
>>30063560
>>30063566
Tank U
>>30063592
I was being sarcastic
>>30063609
>>30063592
Np, Cordan, how's that optic perform?
>>30063626
It does everything I want it to.
Primarily pretend it's an ACOG for $1000 less.
>>30063566
Well, answered my own question.
>most of them add 6 rounds to the Pmag40
>most of them are reliable
>prices run from $16-35 each
>are short enough to work in *most* mag pouches, including flap-style, and are still skinnier than the gen2 baseplate
Replying to previous thread
>>30060510
2 spoopy 4 me
>>30060667
It was some eurocuck posting his bubba'd bullpupbullshitery sks
8/10 mad
------------------------------------
>>30060668
I do its just scrap steel with two hole shot thur on top corners so i can attach wire to it and hang it from nearby bamboo the steel's for only rimfire and pistol. .357mag dent it very well though
>>30061116
Nope they sucks in ruggized department.
>>30061297
Dude. go see what molon can do with various reddot. Reddot can shoot submoa group and shoot at distant target like 500yds out
Its you.
>>30061847
Their premium line are at least as good as colt if not better.
Fn barrel trump colt barrel in longevity and sometime precision.
Psa use toolcraft bcg which's direct field replacement bcg for colt and fn bcg in mil.
Psa use LW Schneider small parts and upper. Lw Schneider supplied multiple known quality ar15 manufacturer with their parts including colt.
There ya go.
>>30063529
Savage made Enfields were made in the US.
Longbranches are the syrup Enfield.
>>30062093
Lwrc full true ambi>KAC fakeass ambi lower
But kac upper got it in bag with their e3 design
Other than the ability to mount a can, is there a difference between the Socom and ProComp surefire muzzle brakes?
>>30062339
Agreed. Single stage masterrace fuck two stage meme.
S3g reporting.
>>30062816
Wew lad! DO YOU KNOW WHERE YOU ARE?
Apparently you dont, you with your english corrections...
Git out u stuipd lit cukk
>>30063386
Before i clicked thumbnaili didnt think i would but. Dat a2 upper.
Dpms make good receivers and barrels. But you wpuld have to replace bolt, trigger, and buffer spring before i give you two thumb up.
>>30063846
DPMS' bolt is fine. Straight milspec carpenter 154. Buffer spring is pretty standard, no reason to upgrade it unless you were going with a JP standalone or captured.
ayyy
>>30063900
I want a light A2 rifle like that. I may try to build one later this year.
>>30063846
>DPMS makes good receivers
Lowers are fine, wasn't until like last year that they went with an in-spec upper though. Their top rails were an eighth of an inch too tall.
>>30063790
>do u know where u are
As if that matters.
>>30063868
Nope. I owned dpms ap4 carbine. Their bolt will break around 6k.
Their recoil buffer spring sucks it lose its rate fast it gotten noticeable weak at 3k but still work fine but you would be better served with springco.
When building your first palmetto, how much difference does the lower make? Is there any reason not to just get a cheaper one?
>>30063924
>bolts break at 6k
For the cost that's fine. Just upgrade as shit breaks. For a $500 rifle what do you expect?
I took my rifle outside guys!
>>30063981
>I took my rifle outside guys!
no way
>>30063909
Good luck! Looking forward to see more a2 build especially carbine around here. A2 upper are harder to find than a1 nowsday imo.
And mine have HBAR bbl not gov profile. I would still call it lightweight at 7.4lb unloaded. To me rifle is light-regular weight up to 14lb.
>>30063914
Newfag detect! lurk moar!
It matter very much, more than anything.
>>30063981
That's nice
>>30063971
I would replace it with cheap toolcraft bolt for like 50 buck and be worry free.
You know it might break sooner or latter most likely sooner.
Or not if you are penny pinching poorfag.
I built psa for as much as dpms and it would shame fuck out of dpms.
tfw you will never own this
Hbar... Thicker than socom profile.
>>30063994
>it matter most
Ok you gross monster
>>30063631
Its no ACOG but its still fun
>>30063994
If I build one it would wind up having a lightweight or pencil profile barrel. Those Colt Sporter Lightweight rifles are what I have in mind.
>>30064032
who are you talking to ?
>>30060796
what in your opinion would be the best stand for those?
i drive an hour away to go shoot, and i need a stand thats easy to put down and not terrible large or heavy.
>>30064102
I see people use cheap plant hangers from Lowes/Home Depot.
Also, apparently Geissele only offers their discount for active duty. I should have registered for it earlier.
>>30061831
im going to vote trump just so i can see his smoking hot daughter more often.
>>30063971
I didn't even respond to him because from my experiences with him, it's not worth it.
>>30064102
Cheapest-shepherd hook
Don't expect a lot from it
Best-CTS 2x4 holder with a CTS 2x4 drive in stake and a 4foot 2x4
Figure another 45-50 bucks but it's a much better setup.
>>30064027
anon, but an 80% lower, and have someone laser etch it.
thats actually a great idea, i think i might build one for my wife as a present.
>>30063981
unacceptable!
>>30064015
>>30063971
>>30063924
>mfw 11k rounds on my current bcg
I should buy a new one soon
>>30064062
So newfag he couldnt get the joke.
Pity. I'll just atop responding to that retarded its apparent he isnt capable of grasping the concept until he lurk more and fully understand the culture here.
>>30064072
Got you, a lightweight kiss build.
I built this with it being kiss build with capacity to serve as lmg.
>>30064100
8 ball bb
>>30064403
You should make some more of your horrible operating videos.
>>30064403
Depends whats manufacturer of your bolt? If its say lmt enchanted you got at least 3k more.
If its regular quality manufacturer like colt,bcm,dd,toolcraft,etc
Yeah very soon. Very soon.
And it depend alot on rifle's diet whenever its mostly low-mid power ammo like wolf or fed val pak or mostly hot shit like m193,m855,mk262 etc.
>>30064444
Quad witnessed.
They arent horrible at all, well only like one or two...
Stupid question o'clock: How close are you supposed to have your face to the sights when using apertures? I've never had a rifle with peep sights before. I've been keeping my face really close, like nose on the charging handle close, because it lets me focus on the front sight better. Am I doing it right?
>200 posts
>12 hour old thread
Must be a slow day
>>30064444
webms or on my channel? it's really hard to get everyone together with work and drill. also checked
>>30064102
>>30064115
>>30064197
I use $7 plant hooks form Home Depot like here >>30060730
Dont shoot from extreme side angels with these though, the spalling might get into the hooks. I also drive 1.5 hours to shoot almost everytime and I carry these pretty well.
Started a new book
>>30064522
>am I doing it right?
knock yourself out with it, bro. What's more important is if your cheek is resting naturally as you have the gun shouldered. There is surprisingly little wiggle room in the aperture sight -- unlike a red dot.
>>30064557
Great read. Spoiler alert: Boots come medium-style
>>30064522
It doesnt matter really.
Ideal distance would be different for every person. You should be easily able to perfectly center the center of tip of front ppst in rear aperture without much time and effort so too close's out.
You should be able to clearly see crisp ass front post so too far's out.
When you are too close its like you are standing in big ring 8 feet in diameter and faggy host of tv show you are on ask you to quickly put your fingertip wherever you believe is the center of the ring.
You gunna be off and slow meanwhile if you had to point the center of ring thats feet in diameter on table that you are standing by. Thats ideal
If you are too far from rear aperture its like trying to find center of quarter with your fat finger.
Myself i found i can get smaller grouping when im farther from rear aperture but its slower.
>>30064525
Webms. I don't want to give you youtube money
So how are piston kits? Does converting an AR to piston have any noteworthy disadvantages over simply getting a proper piston rifle?
>>30064557
Taking a dip into HST?
Went shooting today, my eotech suddenly got super dim to where I could barely see it in full sun light. Changing the batteries didn't help. I think it's the sight at this point. Sending it back once I get my strike eagle in a few weeks.
>>30064598
Piston is shit.
>>30064635
And eotech
>>30064598
There is NO real noteworthy advantage.
But bad disadvantage of serve carrier tilt wearing away the buffer tube and if not replace timely it will wear away the lower. Plus the carrier nub would get deformed by getting repeatedly hammered by piston rod plus some piston rod bending.
Just list long of new problems.
>>30064635
>eokek
>>30064438
>knows where he is
>not a weeb
>says he knows the culture
You talk dumb
>>30064651
>a $0.01 part will have to be replaced after 10,000 rounds!
That's literally not a disadvantage.
>>30064589
I think in order to make money one would have to be big in youtube and he's far from that.
You wouldnt be giving him speckle of single rat shit of money
>>30064644
>>30064652
I know, I got it for a good deal though before the stuff came out. I like the look, but I'm sending it back soon. In the mean time, any idea why it would be so dim?
>>30064661
The amount of rounds between servicing it need is bad.
It isnt about the money you idiot
What you are doing now or fixing to do is like running in ford forum and claim that 6.4 engine (garbage) is absolute best way to go and headbutt all experts on there pointing out superior engine counterparts and flaws in yours. You are currently headbutting against long established knowledge and facts.
>>30064681
-not good battery contact
-something is wrong in circuit inside like certain part on circuit board gave out or burned out.
Try to clean the contact points for battery inside with bronze brush, cotton tip soaked in alcohol
Gtg, brb in about 3 hours maybe sooner or latter
>>30064746
Alright, I'll check
Thanks
>>30060668
Shooting clays are best.
Bright, reactive, light, cheap targets that are bio degradable.
Also, fuck trees.
>>30064589
hue like I have any near enough viewers for that. I'll make some webms next time I get some OC
>>30064818
Not really. Theres limited places to put them, they dont simulate shooting on a person or animal very well, you can only set up so many, and you have to buy more each time.
>>30064818
Steel>clays
You're worse than fluffy
>>30064818
>Also, fuck trees.
kys faggot lmao
>>30064834
>limited places
>bushes,
>rocks
>hills
>90 per $5 box
I can understand placement issues but they are so fucking cheap I don't worry. Plus, innadesert there's enough places and I enjoy shooting them over and over to dust.
>whoa bro you simulate shooting humans when you go to the range?? You aren't gonna shoot up a school right haha?
>>30064651
>>30064724
Well over a piston AR it has the advantage that if you need or want to go back to DI you have that option, right?
For someone who wants to learn about piston first-hand without committing completely to one, it seems like a fine middle ground.
>>30064834
And if you drop them, they break
>>30064866
>caring what people say at the range
kys faggot lmao
>>30064864
>says anon
>>30064865
You're right, I should clarify. Fuck trees that are planted in low water environments when it's well known that species will have roots rise to the surface and fuck my concrete in the ass
Have spider pic
>>30064879
No u, bch
>>30064866
I can literally set my steel target up anywhere there is dirt. And I think my last range trip alone we put nearly 2k rounds at my target between various calibers, that quickly adds up in clay cost. Plus no satisfying "ping" every time you hit. And a larger target.
>>30064879
>having shit bulls
Lmao go kys trash boi
>>30064898
I can't deny the wonderful ping.
I've got a few aluminum molds from work and those work OK but I don't hang them
>>30064879
Yo familam it's supposed to rain Saturday. You still planning on going?
>>30060668
I need to get some steel. On an unrelated note, I got about $200 worth of .223 and 7.62 RFN for around $60.
>>30064864
WHAT DID YOU SAY NIGGAH?
>>30064724
>it's not about the money it's about the servicing!!!!
If you don't have the 10 seconds it takes to replace the tube or buffer retaining pin when you're doing your post-shooting trip basic field strip cleaning once every 6000 rounds, you either need to loosen up your schedule or lay off the drugs when you're cleaning your gun.
>>30064898
He's a calicuck, so he must drink a shot glass of Feinstein's vaginal juice before he can play with his AR
>>30064948
False.
>>30064938
Shut the fuck up
>>30064925
How'd you do that?
>>30064938
Remove cluck
>>30064914
>aluminum molds
Those would be awful wouldnt they? I would think they would be too soft to stop anything
>>30064966
Magic. Also friends with jobs in sporting goods stores.
>>30064872
DI>Piston
all day
>>30064988
They are about 4" thick. 308 won't punch all the way through at the thickest but at about 2" it will
>>30064992
That's awesome dude.
>>30065011
pics?
.308 doesnt do shit to my 3/8" steel
>>30063981
>that thick, tall, non crab grass
I need to move back north
>>30065038
When I get home I'll take a few
44mag dents it a bit but the pointy fast ammo does a real number on it
>>30064966
Spit in my mouth
>>30065107
Oh lordy son what is that
>>30065107
I'm sure you'd like that,
>gay
>dyslexic
>12 years old
>supports Hillary
>has shit chickens
Literally no reason for you to live
