Glock worked fine for the past year I've had it, then suddenly over the past couple of weeks every few shots it'll do this. Tried different recoil spring, barrel is free of burrs, feed ramps are fine, just cleaned it and its still doing it. The only other thing I could think of is some sort of damage caused by flood water as I'm in southeast Texas and I walked around in the water with it on me a lot. Does anybody know what the fucks wrong with it?
>>29306144
check under the extractor or in the mag for rust
Meant guide rails, not feed ramps
>>29306144
Does it do that with every magazine?
>>29306170
Yup, and I've tried 10ish
>>29306182
Huh.
Can we get pics from under the slide?
>>29306190
And the top of the frame, I guess, while you have it open?
>>29306162
Extractors fine and I've tried several mags
>>29306190
Yeah, give me a minute. Is there any specific areas you'd like to look at?
IT'S GONNA BLOW
>>29306144
try moving extractor with finger and note strength
>>29306217
>Is there any specific areas you'd like to look at?
If you could get a shot of the breech face, that'd be nice.
Picture is pretty vague. Is it jamming when loading a round from the magazine or stovepiping on ejection?
Regardless, the first thing I would do is completely disassemble the slide and clean/lube the extractor
>>29306144
the tube that pushes the extractor is installed backwards
youve got the spring showing when it should be the solid peice
>>29306295
Pretty sure he's right OP. Looking at my 27 right now, and that aint right, son.
>>29306295
>>29306341
Have my 19 right next time and can confirm.
>>29306251
Can't move it with my fingers
>>29306266
See picture
>>29306290
Its not going all the way into battery
>>29306295
I'll do that and go test fire it, not sure how the bitch worked like that for a year though. The only time I ever took that apart was when I first got it to put maritime spring cups in it
>>29306341
I'll get on that then
>>29306381
>Its not going all the way into battery
What rounds are you using? Do you have a dial caliper to measure the overall length?
>>29306381
>not sure how the bitch worked like that for a year though
if youve been shooting it like that for a year you probably need to replace that spring wouldnt surprise me if its been damaged
>>29306295
Damn, nice eyes anon.
>>29306381
Op does the problem persists with the OEM barrel? Let's try the simplest solution first...
>>29306404
I've used all kinds, still the same thing.
>>29306420
I'll look at it after I shoot it
>>29306452
I dont have the OEM barrel unfortunately. I dont think its the barrel though
I'm on my way to my shooting spot, I'll let y'all know in like half an hour if it worked
>>29306295
eagle eye... that's exactly it
That sure the fuck was it. Thanks whoever had the eye to see that shit. I only had like 10 rounds to test it with so I'll get a couple boxes tomorrow to see if I need a new spring or anything. Thanks again yall
>>29306831
Nice, you owe that anon a beer. I was thinking ammo was loaded out of spec and too long.