>HYBRID NYLON 6-6/BRASS STRIPPED RECEIVER
http://www.tnarmsco.com/single-hybrid-nylon-6-6-brass-stripped-receivers-starting-at-40-00/
Opinions?
you can also get them custom engraved
http://www.tnarmsco.com/laser-engraved-lowers-as-low-as/
Garbage.
Trash
Exceptional Quality.
Any other custom receivers you can get engraved?
engraving? never heard of it
Looks cool. Lighweight and cheap. Does anybody know why they're using brass?
>>21889510
shit they are gonna put the /k/ lowers i am gonna make out of business
>>21889510
a metric fuck ton better than the regular polymer 80 shit, more like a jmt with brass inserts and an ffl requirement.
I just want the clear one because it looks cool.
That being said, you could get an anderson or blem psa for $40 as well.
pic not related, lowers are cheap again, get them while you can.
>>21889510
I got couple of them, they are light (1lb lighter), there are some fitting issues which with a little tweak it will work fine.
>buying a plastic lower ever
>>21889701
what part of them are brass?
>>21889701
The front take down pin area needed to be trimmed to fit.
>>21889585
i want to know the same thing, good quality custom engraved lowers
>>21889742
The buffer tube nut and pistol grip nut are brass.
>>21889749
Another part needed to be tweaked was the bolt catch, I just polish the area where bolt catch rub against the receiver so it will tilt when the mag is empty.
Pic is before I polish the bolt catch, it does this to TangoDown, Troy, Magpul and metal USGI mags.
I am waiting for them to come out with the "Ghost gun" then I'll pick up a few.
>>21889742
Also this answer your question too
>>21889703
Glocks did this, shit worked out great and paved the way to polymer
Then again he said nylon and brass which have flex
Not something id precision build on
>>21889843
clear lowers when?
>>21889844
Glocks have metal reincforcement at all stress points.
This lower only has it for two threads. Not even bulked up at the buffer where the majority of breakages happen with polymer.
** ATTENTION POORFAGS **
Get 3 of this
http://www.aimsurplus.com/product.aspx?item=XATIRKT03&name=ATI+AR+M4+Profile+Rifle+Parts+Kit&groupid=714
+
One of this
http://www.tnarmsco.com/gen-iv-build-a-bundle-3-your-choice-of-3-receivers-free-shipping/
(if you have free FFL transfer)
= $1320 for 3 AR ($440 a rifle)
Sell the 2 extra for $660 each... now you have a free rifle
>>21889879
Clear plastic huh, i would hope you'd never shoot it.
Residue, scratches from brushing, staining from oil and copper solvent...
>>21889919
LGS formulas eh?
>>21889926
Why not?
>>21889994
Get back with me after 10k rounds and 10 cleanings
Also try suppressed full auto , i imagine that should be fun
>>21889994
all my wants
I don't see how brass would be stronger than it would be if the same volume were made of one piece of plastic. In fact, I'd argue it's weaker, since the frame is thinner to accommodate the brass bit; the brass piece is just going to act the same way that a receiver extension would in a solid one-piece plastic lower. The weak point is where metal interfaces with plastic, whether that metal is the receiver extension or this brass ring doesn't matter.
Better materials and thicker plastic ought to make a difference. The brass seems gimmicky to me. Also that clear one is like putting a claymore in front of your face, clear plastic is far more brittle than tinted.
>>21890035
>>21890107
I'll wait for someone to make one out of glass.
>>21889919
>selling
>in a buyer's market
>>21889919
notbad.jpg
I work at a retail shop, might have to order 10 of these and sell them for $600
>>21889510
>http://www.tnarmsco.com/laser-engraved-lowers-as-low-as/
>Constructed of High-Strength Nylon 6-6 and Marine-Grade Brass inserts
>Marine-Grade Brass
what does that even mean
>>21890542
it means that they are approved for all fishguns.
>>21889510
PSA blemished lowers can be had for $10 more. Why would I waste money on this trash?
>>21890841
>no custom engraving
>>21890841
>PSA quality
lol nope
dropped from 3 ft on the kitchen floor
>>21890921
The lower didn't break so what's seems to be the problem? I think only a very small percentage of LPK's front take down pin can take a fall like what happened to yours.
>>21889843
Oh, well that's explains "why brass" and "why so cheap". Brass because they can use cheap brass tubing, why cheap because there's barely any brass. I was hoping that the brass reinforced the area near the rear takedown pin too.
>>21890908
Great. I'm sure it will look pretty when it fails..
>>21890921
Saw your original post. You dropped a lower onto tile floor with pin sticking out causing the pin to shear.
>OMG!!! PSA SUX!!!
>>21891062
if it can't handle the force of it being dropped on the floor from 3 feet, i don't think i want to rely on it in the field.
>>21890542
Naval brass. It's used because it's resistant to corrosion. They're calling it that for marketing reasons. "Brass" is too common place of a word but "marine-grade" sounds special. Like "aircraft-grade aluminum".
now do a cav arms style lower in clear and we will really be is GHOOOOOOOST GUN territory
>>21890921
>dropped from 3ft on kitchen floor
>lower still intact
Thanks for proving to me that PSA is acually good.
>>21891122
Make it out of clear plastic
>>21891122
hell yes, handguard too, and use a Lancer L5 translucent mag? I refuse to live in a world where this is not the future.
>>21890921
atleast it was a pin and not the reciever shitbag
>>21891135
>>21891227
the LPK was palmettos "enhanced" kit
made by PSA
shows their quality
>>21891256
Stop being so fucking mad and buy a new pin for $2.
Shit happens. You got a bad pin.
>>21891325
It's not even a bad pin dude, that pin shouldn't be exposed to take that kind of abuse. That's like saying the door is faulty in the this gif
>>21891256
you can already tell that you had the pin out and dropped the entire thing on that spot causing it to snap. especially on a hard floor. Suck it the fuck up and always have extra parts, or be smart and buy shit thats steel that won't break.
>>21891084
>relying on it in the field
And when exactly will you be opr8ing?
>>21890921
>>21891084
>>21891256
>drop lower with pin sticking out
>pivot pin broke, lower intact
>somehow this makes PSA bad
I seriously hope you sell all your firearms
>>21889677
Holy shit, was that stripped lower really $1000?? Even at the peak of the sandy vagina bullshit I could get stripped lowers for under $200 in fucking California of all places.
>>21891113
"Aircraft-grade aluminum" is not the same aluminum Dr. Pepper cans are made of you know. You can't build a certificated aircraft with whatever aluminum you happen to come accross.
>>21890908
>Not doing DIY engraving and anodizing on your 100% aluminum paperweight at home.
http://www.ar15.com/forums/t_3_4/484783_Vader_Spade_s_80__AR_15_build___Milling__Etching__and_Anodizing.html
>>21892735
I know. Everybody knows. Nobody cares because it's just the same 6061 or 7075 that every firearm mfg on earth uses. Same with naval brass. It's nothing out of the ordinary but people who don't know will see it as something special.
>>21892735
Have you ever seen the parts that go into a Robinson?
>>21889510
so it's like a Glock brand AR-15 ?
>>21894806
I've flown in an R22 but that's it.
Why? Are they shitty?
>>21894850
Eh, they're not shitty, but...how do I put this. If Bell is an H&K, the Robinson is a Romanian AK. It's not pretty, it's not high tech, and it's not made out of the finest materials, but she works and works well. My comment was more to address the whole "Dr Pepper alloy is not used in aircraft." That is not an accurate statement. Most soda can alloys are a 3XXX series aluminum. It's used for interior trims and some mounts and things. Nothing Primary or Flight Safety, but it's in there. But it is true you can't just use any aluminum, it has to be certified by the mill and designated by the B/P. Hell we do some parts that go in main rotors that are just pure lead.
>>21894884
Okay true, I didn't really have interior trim in mind.
Woah woah back it up...
Do you work at Robinson?! Are they hiring A&Ps?
>>21894955
That's a negatory there ghost rider. I work at a second tier contractor that manufactures parts for various aerospace manufacturers. Where are you located and what is an A&P? I'm not familiar with that acronym.
>>21894968
That's still pretty cool.
A&P = Airframe and Powerplant mechanic. I'm in Northern California workin' on Cessnas and whatnot.
>>21894994
I gotcha, let's see....well If you feel like moving to DFW you can probably get on with Bell or at DFW airport, or any of the others around here. Given the low cost of living you may earn less a year but pocket more than you do now. Also have Toyota moving here this year. Other than that, there's not a lot of aerospace news right now.
>>21895021
Thanks for the info anon.
Bracer came in today and got it installed - just need barrel, barrel nut, delta ring, A2 front sight, gas tube and muzzle device.
Hi, John Roberts here. One of the owners of Tennessee Arms. Just to answer a couple of questions i've seen. We used brass because of the ease of machining and also brass does not react to anodized aluminum. Also it will hold up to salt water. We have yet to have one fail in the field and our lower is used in some of Frank Proctors carbine classes. He used our lower on his personal lightweight build and he has close to 7000 rounds downrange, his build came in at 5.5 lbs. We haven't had any cracks in the buffer tube or any breaks at the beavertail. www.apexgunsmithing.com has been trying to break our lowers for 2 months without fail. We've mortared them, shot Beowulf with them, beat the hell out of them, and stand behind them 100%. That's why we offer a lifetime warranty on them which does transfer to different owners. If you have any other questions feel free to give me a shout at [email protected]
>>21897897
> fafgots always complainin about shilling on /k/
> someone actually shilling
> no replies
ok
>>21898070
>A shill [...] is a person who publicly helps a person or organization without disclosing that they have a close relationship with the person or organization.
>>21897897 clearly discloses the fact he's an owner, so that's no shilling. However, it could be considered advertising, and that's against the rules.
>>21896187
$45 lower
$230 handguard
Your build makes no sense, and is ugly to boot.
>>21897897
Wow what a coincidence you found this thread, I bet you totally didn't even start it.
>>21898251
No actually i saw where i had 11 clicks from my Google Analytics traffic, so i thought I would stick my head in. I didn't start the thread. I post on reddit and that's about it.
>>21898332
Regardless, reported for advertising
>>21898332
I find it a little weird how you know how to post and reply already. Well whatever, welcome to /k/ now git
>>21898332
welcome to 4chan, you're here forever.
Anonymous will shit on everything so don't get upset at the bullshit spewed.
>>21898400
I make a lower that isn't metal. I'm used to bullshit getting spewed on me. No biggie. Sorry if it seemed like i was advertising, Im just trying to answer questions.
>>21897897
>dat lower
I don't care what /k/ says, you are alright
>>21898446
you might like this one too..I've been testing my laser out to see what i can and can't burn without the cheap mf locking up... did Walken in one swipe
>>21898478
Good jerb. He's a huge anti gun faggot
>>21898478
Can you make a Vining one instead, please?
>>21898478
You got anymore stress testing of your receivers? I want to buy but I want to be sure they are durable.
>>21898634
http://knowyourmeme.com/memes/people/sgm-mike-vining
YES do this on an AR lower
>>21898478
>>21898634
>>21898692
>>21889919
>Sell the 2 extra for $660 each...
wat? you think you're going to sell $400 parts kits for $660?
lol...
>>21898715
I need stickers of this for my gear case and gun safe. Where is the NE guy? Someone tell him to get off his ass.
>>21898725
You've never been to armslist I take it...
>>21898744
you've never used armslist to buy or sell anything i take it..
>>21898715
On the laser now...black and white is sooo much easier to set up...give me bout 10 min , i haven't engraved anything today
>>21898731
I just ordered some from zazzle, Does anyone want pictures when i get them?
>>21898775
I'm a CNC machinist/laser operator.
What machinery do you run? Is it primarily CNC? If so, what manufacturer? Do you do any manual mill work?
I've dabbled in gunsmithing, milling out 80% lowers, making muzzle devices, drawing parts in GIBBS & CAD/CAM and cutting them on a CNC. Is there alot of money to be made in a small shop setup, or do you have to be hundreds of thousands into it before you turn any profit?
>>21898715
Here ya go.
>>21898897
fucking awesome, nice job
>>21898897
Must. Have. It.
>>21889919
>purchasing firearms with the intent to resell
We frown upon that.
>>21898891
We just now got into the laser game. We're trying to start out slow and save money for our hybrid AR10 mold. The injection machines and Epilog Mini flatbed laser are in the shop directly behind our building. We actually rent from the shop that does our molding. The laser I use is the absolute cheapest ($700) K40 chinese laser. Im using it with Corel Draw and the MoshiDraw software that came with the laser for engraving. It's good for stuff with good solid lines but the Epilog mini in the back is where it's at for detailed work. If you want to know about the injection machines i can find out, but i leave the presses to the press guy.
>>21898070
>guys comes right out and says he's a company co-owner
>has the name of the company and his fucking company emaail address right there
>shilling
These are dark times for /k/
>>21898897
Did the owner of TN Arms Co just jump into a 4chan thread about his lowers and then engrave Vining's face on one just because someone asked him to?
Fucking based.
>>21898919
Only way I would do this would be if someone submitted the art. I don't keep "likenesses" and trademark stuff on file, I consider that "one off" or "custom work"
>>21899002
Someone save this for future generations. /k/ really is a magincal place.
>>21898897
Oh nice!
OP here, I'm looking ot get one of your lowers but I have a question, how well does the engraving look on a black receiver? how deep is the engraving?
i made this vector that I want engraved on a lower, but I want to be able to have the color of the engraving stand out to the black
>>21899002
>mfw I was the man with the idea
>mfw my first screencap
>>21899028
I just want the color of the vector white though on the receiver
>>21898897
E-mail this to Mike!
>>21898897
>>21898897
europe here, screw ITAR
i want one of those !
>>21899028
it wont work, the image is far to homosexual for the Chinese lazers
>>21898897
So uh what would be the best way to smuggle this to an Island nation?
Vining is love. Vining is life.
>>21899002
Yea I did,
Why do polymer lower makers always try and emulate the exact dimensions of a normal forged lower? Especially when the weaker material calls for some kind of change.
>>21899168
did you see my question? >>21899028
>>21899028
So you are going to color fill it later? If your just wanting the outline done pretty deep, I can do that, id probably makes two passes and make sure the lines weren't too thin. Make a good barrier for paint is what im sayin.
>>21899097
Yeaaaa ... about ITAR..... we kinda didn't forget to not pay them. :( Im not an international arms dealer yet.
>>21899226
yeah, I'm going to paint it in, I would just leave the instructions to engrave it deep right?
>>21899226
If we order one, can we specify that were going to color in? Bc I'm about to pull the trigger on this. Been wanting to do a lw pistol build for a while. What's the turn around on them?
>>21899249
just send me the Mike one you just did an put "plastic merchandise" on the box, customs won't care
pretty please
>>21899106
It didn't seize up when I did a DickButt . Just sayin
>>21899185
Our mold is actually over sized to take in account the 3% shrinkage rate of Nylon 6-6 . This isn't a carbon copy of a forging mold. We built it from a solid block .
>>21899295
>It didn't seize up when I did a DickButt
You got a pic of that lower?
So you'll engrave just about anything then?
>>21899186
Soo you want it outlined... then the inside of the outline engraved? If that is wrong , be a little more specific. I'm sorry this would be my first pony job.
>>21899345
I just want the engraving deep enough that I can color it in, if that makes sense? like on a traditional AR-15 forged lower engraving. here's my completed vector
>>21898897
Fellow Tennessean here, I am definitely purchasing from you at some point in the future.
What other products do you make/want to make in the future?
>>21899257
Yes, if you leave it in the comments the engraving will be done to your specs
>>21899295
I NEED THE PICTURE!
NEED IT!
>>21899375
...just when this thread was going well, ponyfags come in and shit it up.
thanks, horsefuckers. you ruin everything.
>>21899345
Would be nice if you showed us
>>21899260
Depends on how complicated the engraving is and if we have that color receiver on hand. Pink, Rifle Green are out until Wednesday and FDE is almost gone until Thursday (we are waiting on brass) But if you want black the turn around would be less than 72 hours.. really depends more on how quick we can get a copy of your FFL's license
>>21899439
I am OP
you're welcome
>>21899450
nice, I have an FFL on hand, but yeah, I just need it cut deep enough to color it in. Here's version 3
>>21899334
that one was a hit on reddit.
>>21899490
how much would a custom engraved lower cost?
>>21899392
We are in the process of getting out NP3 BCG coated at Robar and we manufactur our own muzzle device. We're still small time. Nothing too big yet. Net big thing will be the AR10 lower
>>21899490
What won't you engrave?
>>21899490
I want it
>>21899446
An outline is going to look like an outline. It would actually take a while for a deep engraving for color fill.. I'm not going to run at full burn just to show you I can. That's just wasteful.
>>21899490
But will you do engravings of muh chinese cartoons?
>>21899503
One offs are 10 extra for one. If you get more than one they are 5 per.
>>21899520
I won't do anything French. And really detailed stuff would get sent back to the Epilog laser
>>21899569
Depends on how they turn out in black and white. Laser only reads black. So adjust your art accordingly
neat
>>21899516
If you guys could somehow get an AR-10 format rifle out the door for less than $1,000, you'll have broken into a very select market.
tnarms confirmed based manufacturer. Suddenly I really, really need a zergface lower
>>21899550
Well you can now! I just placed an order for the Pony engraved lower.
The FFL also got sent to your email.
>>21899698
We plan on doing the DPMS style that is AR15 parts compatible for around 75 stripped. That should help some builds out.
>>21899610
So, you're saying you have no problem if I want a /k/ on one side and dick butt on the other?
Sweet
>>21899727
Get hype
>>21899719
Damn that was quick. Thanks. Do you want the Liberty Belle engraved in there as well? and all of it is to be outlined .. but seperated for color..right?
>>21899745
The other side has my logo and ATF required stuff. the right side magwell is open for interpretation though.
>>21899727
Aw shit yeah.
>>21899758
yeah, I do want the liberty belle to be engraved. but yeah I just want it all deeply engraved so i can put in color into the outline
>>21899758
>>21899789
wait do you want the pony outlined and solid in the middle or just the one you posted but deeper to allow paint? I get 2 different readings from you guys
>>21899727
>>21899727
My wallet is ready
>>21899758
>>21899821
Just the outline, I just want to color inside the outline, like if you were coloring in letterings
>>21899865
So the opposite of this?
>>21899892
Looks like she has a giant cock/tentacle in her beak
>>21899892
gah no like that, not the opposite lol.
The way I am phrasing it may be confusing.
no different than usual engraving is what i mean
>>21899892
How bout I just do the outline and you tell me what to do from there ////
>>21898478
You should make a Michael Bloomberg receiver.
>>21899924
OP here, I just want the outlining like this.
>>21899924
I'll just use a trip so you will know who i am.
>>21899953
ok ..We're on the same page now. I thought you wanted to FILL it in. Laser activated!!!
Dear John
I've been supporting you since you first posted on leddit with your NP3 bolts. After the vining lower, I am now proud to have one of your products in my rifle.
Keep it up, and you'll always have a special spot in /k/'s heart.
NOw if only you could do one with the Great Remover on there...
>>21900031
Sweet! plz show some pics afterwords!
>>21900037
Im taking the Great remover is the artwork you're showing? Forgive me if Im not completely down with the lingo
>>21900037
>>21900077
Found a stencil for you
The Great Remover refers to the accordion-playing Yugoslavian in the Serbia Strong/Remove Kebab video
And if you haven't seen that...
https://www.youtube.com/watch?v=U-EQJA8Ahac
>>21900077
http://knowyourmeme.com/memes/serbia-strong-remove-kebab
>>21900109
SERBIA #1
SERBIA STRONK
>>21900122
SERBIA STRONG WE KILL THE USTASE
>>21899966
eckema improvement
On the top of the hat , i ran the tip of a punch along the lines that were lasered to see if it's deep...it's deep enough to hold color.
>>21900109
Oh I can laser the shit out of that.
>>21900192
how deep is the engraving on the lettering? it's kinda hard to tell
>>21900122
>>21900217
That would be nice
>>21900229
Same as the rest of it. Just a bad angle i guess. You could just take a paperclip to it to dig the channels out. Or I can go over it again tomorrow( we're about to close)
>>21900309
ok, if you could go over it one more time it would be much appreciated, the deeper the better. Thanks!
>>21900192
That was quick.
>>21900333
no problem at all.
>>21900347
sweet! can't wait to get it in
KOJIMA custom engraving when
>>21900355
damn not i want a lower with diamond dogs
>>21898141
I mean to be fair that one post isn't necessarily advertising. unless he made the thread originally, which is likely
>>21900355
Do you have a better picture. I can convert pretty much anything , but that picture is kind of ... not great. But i can try to make it work if don't.
>>21900385
Im telling you man, I found this thread through Google Analitics. I saw a influx from a domain I've never been to and i just stuck my head in.
>>21898152
Could be he wanted to cut the over all weight down.
>>21900428
join us, learn the ways of /k/
>>21900428
is this a good enough image for the laser?
>>21898897
God damn, I might just have to pick one up when I build an AR.
>>21900470
I would have to do something with the lightning bolt behind the dog...out line maybe. But the overall look is good, all except for the grey. The laser only reads black not grey.
>>21900499
I almost want to take apart my Colt Match Target and put one of these on.
>>21897897
>>21900543
If you guys are reeeeallly going for lightweight. The clears only weigh like 4.3 oz . Those were the polycarbonate prototypes but i bet the new material we are going to be using for the clear will be an ounce lighter than our regular lowers.
>>21900603
CLEARS WHEN? i need one.. for sceince
>>21900647
Running the clear orange testers next week. If the material works out. Clears early week after next.
>>21900664
Im bout to cut out from work. Ill be back on here later if you guys have any more questions. Hell I might be on here all day tomorrow.
>>21900731
Did you end up doing this >>21900109?
>>21900731
>Hell I might be on here all day tomorrow.
>>21900740
I can do that one in the morning. The black and white faces seem to be coming out great. I know I can do that one .. no problem. Just put " The Great Remover" in the Engraving Code box on the engraved receivers page. I can knock those out all day long. DickButt is the same. Just put the words in the box.
>>21900753
I got a really bad feeling you're right about that
>>21900777
Welcome to the /k/ollective.
>>21900731
fyi since you've never been here before, threads expire after a short time of inactivity and are deleted. Thanks for stopping by, in case you haven't figure it out yet this is a much different crowd than reddit
>>21900603
Have you tested your AR15 lowers with 6.5x39mm? I want a super light AR that packs a bit more punch for innawoods (cougers, bears and moose scare the shit out of me)
>>21900777
It's a really fun board if you can ignore the shit posting.
>>21900664
sweet can't wait
pls mister
>>21900777
/k/ is full of nice people
We sometimes say weird things and some people try to troll with dumb post but just ignore them if you don't like it
I don't mind shit posting....I make lowers that aren't made of metal. I'm used to being shit on by the 101st Keyboard Brigade
>>21900886
I can do this. The reds would be black though.
>>21898897
Holy fuck
>>21901257
Ain't nothin a little tactically placed red paint can't fix.
>>21901257
that's fine, thank you :3
>>21897897
>>21898332
>>21898478
Would you mind linking to any stress/torture testing reviews & articles made about your lowers please, as well as any comments you have regarding the testing.
Why no additional brass reinforcing around the buffer tube and takedown pin areas which are known failure points?
Will be rebuilding my AR sometime soon and a polymer lower is in the running for weight considerations.
>>21898897
do want
>>21900664
>clear orange
y, yu , you mean like pic related
also seriously, cav arms style stock+lower when?
take 2 of ?
might add lines to the diamond so the fill in can be done better
No.21901418
http://apexgunsmithing.com/poly-receivers-testing-part-2/
No additional reenforcement was needed around the takedown pins because all of our beating, dropping, mortaring, and extensive shooting with the Beowulf have not shown any damage to this area.
Weight on our standard lower is 5.6 oz , the clear prototype was around 4.3 if i remember correctly . The production clear hasnt been run yet but i will let all of the internets know how much it weighs
Our mold can do a Cav Arms style receiver+stock..sorry.
No.21901510?
I might be able to fill it with criss cross texture to make it work.
Do you guys do 80% lowers? I'm in jew york and need one of these for science
>>21901650
Our mold was designed for a 100% lower. The ATF would frown on us turning a mold that makes 100% lowers into paperweights . Bad juju..or wait..bad jew jew
>>21901688
Damn! I'll have to get one of those clear ones when I leave this miserable state then
Now I want to get the Tn Arms logo on our team's uniforms for the Summer Cup.
>>21901786
waitwaitwait
are you implying that we actually have a shot this year? Oh god I've been waiting forever, our team has been a disappointment for years after the first Cup win.
Bookmarked like the hand of an angry god. My NERV AR is this much closer to happening.
>>21901877
Oh fuck. I want to fucking see that when it's done. Somebody get the R3 logo on one of them and send it to those smalldick bastards so they'll hurry the fuck up with the RSS kits and 9x39.
>>21901925
I've been wanting to make pic related for fucking ever. I just hate the giant nasty rollmarks other companies have, and the staggering cost of a York engraved lower (something like $340 for an engraved lower). At this price, I would put up with the giant company logo.
Wait what...my logo on what? Im all about getting my name out there...what sport we talking bout?
>>21901942
My logo on the left side is made into the mold. Right side is wide open for artwork though
>Customer submitted logos require a five receiver minimum.
>>21901993
That was made before we had our own laser. Damn I should change that huh..
>>21901969
I don't mind it at that price point. I mind the giant rollmark when it's a $100 receiver + whatever the cost of the engraving is, because at that point I could just buy a spikes receiver with a funny logo on it. But once I get this Ruger out of hoc, I'll be ordering one.
>>21902032
Yeah, that too.
>>21902032
I'd buy one right fucking now if I didn't have to apply for a permit to purchase
What level of detail are you able to get on the lower?
Would you be able to do this, in let's say, about the size of your company logo on the opposite side, and still preserve some of the smaller details?
no, i want one that is made entirely from a copper alloy. brass, bronze, red gold, don't really care which one.
>>21901954
Just the 4chan Summer Cup, part of 4chan's virtual soccer league.
I doubt you'd get much/any exposure from your logo on the /k/ kits, but 4chan banners are like $20 for a bunch of views on a single board.
>>21902106
Pretty Damn detailed...if your wanting that dirty vibe with specs on it. We can always send it to the Epilog laser in the back if the detail isn't good enough on mine.
>>21901954
it's a soccer video game tournament where computer teams play against each other.
>>21902157
Ahhh gotcha .
>>21902162
Alright, thanks for the response.
>pic just another design I was thinking of getting, other anons might want it too
this thread has been amazing.
>>21902237
What furniture would you throw on it?
>>21889919
Too bad ATI is absolute fucking shit.
>>21902266
I would go straight olive drab on the Imperium logo to really get that look of a laz rifle
>>21902294
No, I mean what pattern would you shoot for and how would you achieve this with furniture purchases
>>21890327
Brass is there because it threads well. It's really hard and or impossible to injection mold good threads, so instead they just use brass inserts and mold the receiver around them. This is really common for lots of high strength applications.
>>21890035
try 10 rounds; the thing frosts over on the inside almost immediately. As it sits, clear lowers are just fancy wallhangers
If I can find a cheap 20" upper I'm all over this thing.
>>21902326
While I am very partial to the Kreig lasguns, a straight pistol grip doesn't really fit the theme of that. And I'm trying to keep this as light as possible, so a free-float rail is out of the question, which sucks, because with a little grey paint on the fcg to break up the profile of the big block-like upper+rail I could probably make it look like a m36.
So in short, I have no fucking clue what pattern I'd go for. I guess I'm just gonna throw on a mid-length 16" with OD magpul handguard and throw a purity seal on it
>>21898937
atf plz leave
>>21902351
We've shot about 180 through the prototype clear lower. No fading issues . The actual material we are going to use is made to be in the sun and resist fading. And that Shit is EXPENSIVE... it will probably be stronger than our regular lowers
>>21902465
neat
>>21902326
>>21902399
magpul MOE handguard and stock with flip up sights and a slanted muzzle brake. Duracoat it all imperial lasgun green and buy a bunch of 10 round straight magazines
>>21898388
It's not to hard anon-kun, any tumblr user could figure at least how to post for the most part. That said a MOD could verify if OP was the same person, which is unlikely since TnArms has been featured in some gun blogs for their clear lower.
Also Dickbutt lowers too.
>>21902847
It wasn't that hard to figure out how to post. I just didn't know if you needed to be a member or not. I have only read of 4Chan on other forums before, but never posted until I saw this thread on my analytics screen. That Shit tells you err thing about who's on your site and where they came from. Hell i can tell you how many IPhones were used on my site today. It's kind of scary actually
>>21902465
how much do you think a clear lower will cost?
>>21903048
fucking google man
reminder to black list all google assets per this post:
>>21903048
>>21903048
Google is building drones. I'm trying to find an SA-3 truck.
>>21903073
The clear is only going to be $60 and thats only because if material cost is outrageous. And yes Google knows a scary amount of info about everybody. Where you is. What OS you run, what phone you're on. How long you stay on a page, even how old you are, male and female .
>>21903096
>black list
Pleb. White list only.
But seriously, web statistics are completely normal. Information about your browser is sent with every request. It's how websites are improved and tuned for the user.
>>21903150
Copper wire mesh man Farrahaday cage that bitch( sp)
