/akg/ AK General
Images are sometimes not shown due to bandwidth/network limitations. Refreshing the page usually helps.
You are currently reading a thread in /k/ - Weapons
You are currently reading a thread in /k/ - Weapons
AK General /akg/
Pakistani Bus Edition
>Thread #10
Old thread here >>30478304
Are old barrel fragments only good for a warlord necklace?
So the ammo situation with 5.45x39 seems to look pretty grim right now as far as brass cartridges go.
It seems commercially made 5.45 is made only in steel casing right now and the market doesn't seem to be wanting for brass (or so I've read).
And because scumbag ATF banned imports of 5.45 7n6, I guess the only way to some is to buy it from already existing stocks from before the ban, which really sucks as that's a very small market.
So I guess I don't really know all the details, but what is the distinction between 7n6 Russian surplus as opposed to others(?) I guess.
I'd love to get my hands on the brass because I actually enjoy reloading my rounds.
>>30490586
Alot of people emailed and bugged a few brass manufacturers (also overseas so if imports shut off no more brass either) privi partizan replied and straight up said demand is no where close to enough, i forget the name of the other manufacturer but I know they only produced brass cases not loaded ammo.
>>30490616
Was there any dollar amount mentioned for what would goad them into making brass? I have a college fund for a kid I'm never having doing nothing, and I'd be willing to grow that account into something that can actually be useful.
>>30490616
That'd be nice if I could find that manufacturer of the brass, cause then I could (hopefully) get my hands on the powder, primers and bullets myself separately.
>>30490635
Billions of rounds would have to be orders if I'm not mistake.
>>30490647
fug
that is more than I'll make in my lifetime.
>>30490647
The grendel got off the ground with a 250,000 case order.
Also, how good is Silver Bear, as opposed to Tullammo and Wolf?
Is it any good?
>>30490709
Silver Bear is considered the go to, along with Golden Tiger.
>>30490586
A group of guys tried to get a group buy going, all emailing privi and they got back and said 1 million rounds is the minimum order, the group buy died out after that.
>>30490793
Fucking Christ man, I really almost half tempted to just go down to black market and get my shit there.
(NOT SAYING I WILL, ATF. FUCK ON OUTTA HERE)
>>30490773
Sweet. I guess I'll get some of that, and continue scouring for that Red surplus.
rifle came with this strap
metal clip part goes to rife
how do i attack other end to self or wrap around body?
>>30491153
It's confusing. Look up a guide on how to wrap an ak sling, there are a few.
>>30491153
If it works anything like a VZ sling, you remove the clip and feed it through the sling swivel and then both sides of the square part on the other end of the sling.
>>30490585
you could melt them down and make a mean little blade.
>>30490312
>he left the track# on the jpg
good luck faggot, you gonna get doxxed or worse - package reported to customs.
>>30491153
clip hooks to ceiling fan, knot other end around neck
>>30490585
I use mine as a breaker bar for my sight tool
>>30490585
Clean up the ends, if you have a chamber, solder in an insert, and use them for homemade pistols.
>>30491216
why would any of do that to a fellow /k/ommando?
it's just magazines
>>30491579
Try searching "monopod gun rest."
I bought a scooter
>>30490427
Thanks for the answer, this clears up a lot of questions. Screencapped so I don't forget it.
>>30490866
you have a brass black market within easy travel distance of you?
>>30491919
No. "Black Market" is just me venting my frustration.
(although I probably could find one with enough sleuthing).
>>30491987
i'm afraid the only option currently is reloading steel.
>>30491819
this is my aesthetic
>buy pistol AK
>ignore ATF
>put stock on it
Is this a good way to get my dog shot?
>>30492045
I read on a some forums that you can also resize .222 to fit .221 or something, but it's a lot of work and you need a lot of tools...
so I guess steel reloading is the only option, although I'm not sure how safe and reliable that is, since steel won't be as malleable as brass.
>>30492071
Is your dog worth $200?
>>30492078
Don't forget to convert the time spent waiting for the NFA stamp to dog years too
goddamn it irks me to pay $35 for a single 5.45 bakelite mag but there is no way im trusting my life to tapco mags.
>922r compliant airshit reporting
Mmmm
how much are you comrades paying for 7.62x39?
with shipping and/or tax i'm finding it about 1/4 a dollar
what's the 'best' weight for target practice? finding rounds at like 122, 123, 124, and 125 grains
wtf
R8? go easy on me
>>30492282
forcedbylackofchoices/10
>>30492282
is there anything really wrong with AMD's other than the long barrel?
>>30492282
ditch that stock
>I also prefer the fugly "beautiful" way stock AMDs look
>>30492282
Does anybody know if you can put a top handguard on an AMD, cause they just look ugly without one.
>>30492200
>>30492228
>>30492241
where does one find such magnificent magazines
>>30492332
You can but you have to shorten the gas tube. It's not that hard if you know what you're doing.
>>30492301
Mine has a regular length barrel. The gas system is short though.
>>30492302
Pic related was how it originally looked. What kind of stock do you recommend?
>inb4 zhukov
>>30492280
.31 a round
>FUCK ALASKAAAAA SHIPPINGGG
>>30492280
There is no "best" weight. The variance of 122-125 grains is just manufacturer to manufacturer differences - jacket thickness, alloy composition, slight ogive and boattail (or flat base) differences. As far as an AK is concerned, anything not tulammo is perfectly fine for marksmanship. Tulammo can have larger swings in velocity, hurting accuracy. If 5 MOA (5" @100 yards, 2.5 @ 50, 10" @ 200, etc) is okay with you, then there's no problem.
>>30492601
Factor in your welfare oil check pinko
>>30492683
government already found a way to take the 60billion away from Alaskans already
>mfw people aren't noticing this shit
>>30491819
nice krink im not too good at telling krink brands what brand is it? how much did you get it for?
>>30492711
I wanna say that is an Arsenal since they offer side folding metal triangle stocks.
>>30492356
One like this.
>>30492334
Russian museum
>>30492711
Arsenal slr104UR
Check out the pad on this early AKS74s stock
>>30492833
>One like this.
You do realize I'd have to have a different receiver for that right?
>>30492847
>that angled trigger guard
why did they change it?
>>30492892
We have the technology, we can rebuild
>>30492922
Pretty hot right
Chimps and ak loving anons
This book is fucking awesome
http://arsenal-info.ru/b/book/2240698102/19
dat booster bevel and sling swivel
>>30492146
Kek, that wasn't even the first time that has happened either.
Anyone ever used or owned a DDI rifle? Are they good or just American trash?
>>30493215
better than ras and i.o as far as i can gather
what furniture should I get for my Vepr?
>>30493215
Better then RAS and I.O like the other guy says, but still junk compared to imports.
TONS of threads on issues with DDI guns on akfiles, including soft metal issues plagued with all U.S shit AK's.
owner is also a POS.
>>30493247
Keep it how it is. There's nothing on the market that looks better.
>>30493252
>owner is also a POS.
This.
>hurr durr if you have problems with our shitty rifles you need to get laid more
wew
>>30493247
How do you like that muzzle break? I'm thinking about getting one for mine.
I got my slr107 last year and it was part of the serial batch before those extra shitty bubbling paint rifles. Now I want to start shooting 5.45 because the first AK I wanted to buy was a sgl a local shop had a few years back and I missed out. I'm just going to assume I won't be able to find the slr104 I want come November, so what are the odds I get one now with extra shitty bubbling paint?
>>30493384
Buy a second hand SGL-31 f.a.m. About $1500 now.
>>30493252
Oh shit son. Recommendation for another rifle in similar price range?
>>30493468
wasr
opap
npap
vepr
>Found a local guy selling beat up but still fully functional East German 5.45 bakes for $20 a piece
>Placed the add about 15 minutes prior to when I saw it
>Contact him
>Someone came by and bought all 40 something mags less than 10 minutes after he placed the add
JUST
Whoever you are if you're buying all of those just to flip for a profit you're a gigantic faggot
>>30492282
get a new handguard / take off the grip so you can actually use 30 rounders comfortably
>>30493562
What about an Arsenal 107 variant?
>>30493592
>similar price range
That's why
If you're willing to shell out $1k+ for an SLR then by all means go for it. Excuse they're fantastic but you're still more than capable of getting by with one of the other rifles he mentioned as they're still great rifles for a cheaper price.
>tfw no glorious AK-107 or AK-12
>>30493607
Goddamn phone auto correct
Because they're fantastic, not excuse. I hate fucking auto correct and I hate the stupid double tap space and it puts a period and starts a new sentence.
>>30493607
I've got a friend who is an FFL dealer mainly so he can collect, barely turns a profit on sales. He usually sells about 200 to 300 under retail. So it won't be that much
>>30493092
>>30493048
F U C K I N G
R
A
R
E
>>30493119
i know. had a few sensible chuckles myself.
>>30493675
You should change the file names of all them to airshit on carpet
>>30493675
It amaze me how stupid some people are. I also have a neat Airsoft. I just bought a six thousand rounds of 5.45 for this pic
>>30493712
Nice stash of ammo and mags
I can't tell if the airshit fags are trolls or just children
>>30493737
I've bought another 7 odd mags since that pic, a few Bulgies and a few izzy plums
>>30493048
Do you have a picture of the prototype under folding AKSU prototype? Cant find mine and it looked to be the easy to clone.
>>30493252
Ah yes, please tell me more how Hungarian bolt carriers are US made and how its not the tapco FCG for making the carrier tail peen in.
>>30493281
>owner is also a POS.
Provide proofs how he doesn't ask literally any person on the akfiles if they want there gun sent back and that they will fix any issue for free also he told a guy to get laid more because he was bragging about how he got 2 260 dollar PSAAK47s rifles, not an actual customer.
>looking for deals on ak-74's online
>run into some forum posts from 2010 talking about century ak-74's going for $350
>really didn't get interested in firearms until after sandy vagina
How low have we fallen /k/?
Even if they were shit, we're selling shit now for +$600, I didn't know it used to be this way.
>>30493770
>Provide proofs how he doesn't ask literally any person on the akfiles if they want there gun sent back and that they will fix any issue for free also he told a guy to get laid more because he was bragging about how he got 2 260 dollar PSAAK47s rifles, not an actual customer.
Sure thing friend
>>30493808
if it weren't for king nigger in the oval office they'd still be around that price
>>30493826
http://www.akfiles.com/forums/showpost.php?p=3212491&postcount=97
Heres proofs, please provide yours
>>30493770
>Mag and a bayo lug?
>>30493828
Will they ever go back to that price?
bizarre rear sight
>>30493984
Most likely not
>>30493984
maybe, Trump might do something. Probably not though.
>>30493770
So are you saying DDI isn't junk?
>>30493955
wait i know what the lugs for
>>30494009
Yeah, they are fine, obviously some have QC issues but at least they correct those, don't own one myself only kit builds.
>>30493712
>opens air sealed compact can of ammo
>puts ammo into another container that he payed for
wew lad.
>>30494087
The two that are on the right weren't in sealed cans, they're this stuff: http://www.sgammo.com/product/545x39-ammo/1080-rounds-ammo-can-545x39-60-grain-fmj-mil-spec-ammunition-lacquer-and-sealant
The open can with the loose ammo is because I thought the can of 7n6 was punctured so I didn't want the stuff to get fucked by humidity. Then I loaded up a few mags. I then went full autist so that I didn't see the missing pouches I open that entire can up and put them loosely in the can.
>>30493770
The hungarian carrier and bolts are fine, their U.S made trunnion on the other hand, few people have issues with the metal peening.
DDI (cough waffen works) is garbage.
>>30494069
Don't most AK manufacturers have QC issues?
>>30494141
U.S made ones yes.
>>30493878
Dudes a POS. Won't ever get my business. He acts all high and mighty because he bought all the WW and tried to turn it into gold. You can paint shit gold, but at the end of the day it's still shit.
AK9 stock
/k/omrade come with me
>>30494130
I have never seen anyone saying anything bad about the DDI trunnions, I think only the polish guns have DDI trunnions cause the WBP ones were cast.
>>30494166
Arsenal and Century imported stuff still have QC issues.
>>30494200
He bought WW's existing AK74 parts (threw out the bad receivers, and fixed all the bad WW guns too btw) and machinery, that's it.
>>30493770
> he was bragging about how he got 2 260 dollar PSAAK47s rifles
That shit was so sad it was almost endearing.
>>30494302
i'd sell them for 550 each and see if anyone bites
>>30494262
Would you think the Polish or Hungarian made rifles from DDI be better?
>>30494359
the polish have better parts and dont need front hand guards modified to work, but the Hungarians are 100 dollars cheaper.
>>30494395
Thanks anon, glad I can trust the /k/ommandos to actually be helpful without being condescending
>>30493878
I think 64890 might actually be autistic or just retarded
>trusting PSA AKs
>ever
>>30492833
Did you get a factory SBR from Arsenal, do the cutting on a 16" model yourself, or have a gunsmith do it?
If you did the cutting yourself, how easy was the process for you? I'm familiar with how to cut and crown the barrels, but I'm just curious how difficult it actually is in practice.
>>30492833
>>30494609
whats the correct barrel length for AMDs?
iPhone pictures look so good when it's overcast
>>30494609
16" and cut it down, they want like 2k for a sbr with the same twist rate. It was easy easy
>>30494621
12.5
>>30490506
Is it horrible that I think that is kinda cool... I mean it is much better than the blue MLP M1 atleast....
>>30494621
>>30494666
There are two types of AMDs. The AMD-63 was the first model, adopted in 1963. Aside from lacking the upper handguard, and the skeletonized lower handguard/foregrip, it was the same as a standard AKM with a 16 inch barrel & fixed stock.
The AMD-65, adopted in 1965, was a shortened AKM with a wire folding stock, shorter gas system and barrel.
Best bang for my buck AK to buy? Must have dimples or it isn't worth mentioning.
>>30494631
>>30494666
Fuck that looks comfy.
>green grass
>rolling hills
steel targets
>terrain where you can set up targets 2/3s of the way around you if you're standing in the center
Fuck
>>30494666
I basically want a Krink so fucking bad, and I'm pretty positive that I could do the work myself.
It would be my first SBR and the whole trust thing confuses me. I'll just need to apply myself.
What kind of groups were you getting without the optic, if you did much shooting without it?
>>30494780
>everythread
>>30494631
The right lighting makes any picture look much better.. Which is why I used to try to urge people to simply step outside to take the pic instead of taking it in their dimly lit bedroom
Phone cameras need good lighting or they turn out grainy as shit like pic related
>>30494804
I've been planning to take higher quality photos of everything in my collection the next time I can get out to the grandparent's land.
Florida can be hot as balls and shit, but we have the benefit of backyard ranges being legal, and as for photography we usually have a healthy amount of natural lighting.
Now all I need is an AK. Soooon. Until then I'll just keep lurking AKG.
>>30494781
It's pretty great
>>30494788
If you can use a hacksaw you can do it. No problem hitting a mansize target at 200 standing.
>>30494804
How much longer on your ps90 form 1?
>>30494870
Just a tip, you can make any decent photo look a lot better by opening it in gimp and doing the auto white balance correct, and then doing the unsharp mask a tiny bit. I'm no photography whiz but some anon posted that before and I tried it out and it really does improve some images a lot.
Partially to make your shit look even more mint and partially because this is an imageboard, so non-shit images are appreciated by myself anyways.
>>30495159
Based on NFA tracker I'm pretty sure I should have already heard back from the ATF.. So no telling really. Maybe they got swamped
>>30495192
Goddamn NFA branch, Ive had a form 3 dealer to dealer so far the has been pending since February yet have had some come back approved that were submitted after February.
Also chimps or zasta does the gas tube on your guys krink cover up the holes on the FSGB? my gas tube is loose and Is having issues cycling, I think the gas tube is too short or the sleve on it has moved back.
>>30495318
Having issues cycling it when hand cycling it or when actually firing it?
Issues caused by the gas piston interfacing with the gas block?
And my holes are partially covered. There was a bit of play in the gas tube so I modified an AK-74 gas tube tension spring to keep it from rattling. But I have never had any issues with my krinker.
>>30490312
You motherfucker, your mags being next to my mags got us both stopped!
>>30495422
Shut it down
My green one is in JFK but there's more I still want to get
>>30495318
Mine wobbles quite a bit and only covers part of the holes
>>30495421
Just when shooting, went out to shoot today with a can on and the sounds of the shooting starting getting quieter until it stopped ejecting empty cases, than the gastube was looser than before I dont thing the FSGB moved forward as its welded in place the welds still look fine and FSGB looks like it has not moved, I am thinking part of the forward part of the gastube moved back as the holes now are completely exposed when before it was only partially exposed. and the small part of the tube that sticks out past the wood is smaller (any way you could take a pic of how far yours is out?)
>>30495171
I absolutely agree. I usually don't even post an image if it's potato quality, honestly.
Also, yeah, I'll give that technique a try!
Any recommendations for mag pouches for a Saiga 12? Been looking up Romanian PSL pouches since I recall someone posted here a while ago with a VEPR 12 that used one for mags and some chokes.
>>30495482
Where did you get a green you lucky bastard? I only managed to get 45 baks because my guy had like 17 of them just sitting around for no explicable reason
>>30495159
>If you can use a hacksaw you can do it. No problem hitting a mansize target at 200 standing.
Shiiiit, that's great. One more quick question; what did you use to crown your barrel after cutting? Did you do the brass-screw and abrasive compound method that I see a lot?
>>30495589
I know you said that your gas block doesn't look like its moved but that sounds a lot like what has happened and I'll tell you why:
You said that the cycling of the rifle started getting weaker and weaker until it was no longer ejecting at all, right? Obvious symptom of undergassing there. But the thing is, the holes in the gas block don't affect the gassing of the rifle at all, they're just there to bleed off the excess gas and get some of the carbon out of the action of the gun. You could literally drill a hole right through the side of your gas block and the rifle would function the same.
The gas block is under a lot of pressure forward every shot, because equal and opposite reaction and whatnot. It sounds like your gas block got pushed forward and slowly began to lose connection with the gas port in the barrel until the gun stopped working, which is also why the gas tube seems farther away now. I can't imagine any way that the gas tube could actually shrink in length like that.
How was your muzzle on your barrel? Was it perfectly flush with your FSGB? Take off your muzzle booster and see if the barrel has receded into the FSGB any. That will be the best way to check.
This is the best pic I can do ya fer right now, I'm out of town right now because 4th of July and I'm going on a date with a girl from /r9k/ tomorrow so that should be interesting.
>>30492287
does it shoot AA/LR4 batteries?
>>30492701
so whats this I hear about everyone in shitain losing almost 40% of their wealth due to guy leaving EU?
>>30492922
there was simply just too many leftover AKM parts around to mandate a new trigger guard.
>>30493413
>Buy a used SGL-31 for $1500.
you call this advice....? fuck outta here.
>>30493586
why do you think there are 900+ users logged in at any time on the files? They have it set up so new threads are instantly sent to their phone. If only I could figure out how to do that.....
>>30493808
Unissued matching Plum kits used to be $179, and a discount for buying 5+, and that was just in 2012. You used to be able to get AMD kits for even less back ~'00
>>30493984
Prolly not, once the price goes up, it stays up. Just look at how Bloomberg killed the .22
>~0.07 minimum
>no more "4th of July penny-a-shot" firesales anymore.
>$28.99 a brick of Federal LRN
>>30494043
can you ID the difference between pre-89 7n6 and post-89 7n6 (improved)? They say it had a red band, but I though 7n6 always had a red band on it.
>>30494088
what is on the trigger?
>>30495749
>I'm going on a date with a girl from /r9k/ tomorrow so that should be interesting.
oh holy shit, dis gunn b gud....
>we never hear from Chimps again.
>nationwide missing persons search bulletin in 4 days
>>30495653
Not a green Bakelite (I wish) but a green translucent mag. Pic is not my mag but similar.
Definitely definitely definitely DEFINITELY check with your homie and see if he has any 45 round bakelites that are made by Izhmash instead of Molot. Those are fairly rare and worth the cop.
>>30495670
I used a shitty kit from brownells that I had to modify because the smallest guide was a 5.56 and it didn't fit. It came with a planing tool that made the cut surface level and then an 11ยฐ crowning tool. Just spun both slow in a hand drill. Finished off with high grit sandpaper and my thumb. Make sure to cold blue the bare steel because it will rust, but clean it up well afterwards because the cold blue stuff has a weird reaction with the chrome in the barrel. I left myself a half centimeter of fuck up room on the barrel in case I fucked up.
>>30495762
I've shot through two cans of Russian 7n6 from 1976 and they were sealed with the red stuff. But it was old as fuck so the sealant was super flaky, you couldn't even open the wrappers without getting red specks everywhere.
I really wish I hadn't shot that ammo but at the time I didn't know how to interpret spam can lids so I didn't know what I had.
>>30495398
Is that a K-var/Arsenal muzzle brake?
>>30495749
Hmm, Ill have to measure it. The barrel was set in a bit but I cant tell if it moved.
>>30495762
>why do you think there are 900+ users logged in at any time on the files
It wasn't on the Files, it was on a local Facebook gun buy/sell/trade group
>>30495854
Lol mate idek what factory these ones were from. He told me 15 dollars for a 45 bak and I told him to send me 5
>>30495675
You can stay with me while we wait for an ATF/KGB task force to come for the booty if you want
>>30495762
>there was simply just too many leftover AKM parts around to mandate a new trigger guard.
The trigger guards were changed anyway, akm and 74s are a bit different.
>>30495875
Nope, CNC-warrior with a 24 thread adapter.
>>30495854
>I used a shitty kit from brownells
Have you since found a better kit or solution that you would have rather used? Also, thanks a ton for your information. I'll have to thank you once I get the Krink and do the work.
Also, good luck on your date!
>>30495854
>Russian 7n6 from 1976
yea but 7n6 improved wasnt around until 1988+, but russian 7n6 sounds nice. was it any different from bulgy surplus 7n6? more smoke? more smelly?
>>30495919
>The trigger guards were changed anyway, akm and 74s are a bit different.
you gonna have to show some proofs for that claim. I dont think they changed them even for the PG reinforcement plate....
>>30495935
>Nope, CNC-warrior with a 24 thread adapter.
how is it? Rock solid with no slop?
>>30495978
Little bit of left to right movement, honestly I'd recommend getting the genuine brake off of numrich or apex
>>30496006
I mean the adapter. Does it have free movement on the threads themselves, before you tighten it down completely?
>>30495905
Did you receive any notification of sized goods?
>>30495398
What type of stock? Do you like it?
>>30496029
Nope, Russian customs has just been silently diddling away at them for the passed 3 weeks. Guessing it's been the same for you too?
>>30495422
Are both you guys orders coming from Mr.P?
if so, I believe I have a idea on how to fix the situation so this never happens again.
>>30496029
You know what, I am pretty retarded though. Just noticed yours says export not extension. I saw the "e" and stopped. My 6B45 and 6SH112 were stuck at export for over a month, yours are more than likely out on a boat and taking forever. I'll try to find the tracking number and screencap it for you
>>30495942
Well I can't properly comment on any of the kits that I haven't used, but I think CNC warrior makes a kit for crowning 5.45 that might be worth a look.
>>30495978
Never shot Bulgarian 7n6. It was fairly smokey and smelly compared to new production 5.45 if I remember correctly. The smell is part of the experience though. Even though it's probably loaded with carcinogens or AIDS or something
>>30495830
Lel I'm just hoping her penis is feminine enough for my tastes
>>30496070
I have my own separate contact, no idea who VA ordered from
>>30496029
Here's my old tracking for a 6B45 with 2A GOST and a full 6SH112 rifleman set up, don't lose hope
>>30496127
you ever see this?
http://www.theakforum.net/files/CAR-FG3.pdf
http://www.theakforum.net/files/CAR-FG1.pdf
http://www.theakforum.net/files/CAR-FG4.pdf
what powder type you got? Are they all the same?
>>30495589
I wouldn't trust just welds, have it pinned and weld/blend them in
>>30495670
Ran a crown thing on it a little and called it good
>>30495749
Bakka there's no girls on the Internet
>best luck bud
>>30495762
No idea but I'll check my other sectioned cartridge pictures tomorrow.
It's a trigger block/safety, they've been putting that on a few random AKs lately
>not wearing any pants
>>30496130
Fuck the wait is killing me
>>30496170
>>30496170
I think it more forward or it has something stuck in the gasblock, i put some oil in the gasblock but none of it came out, not sure how it moved shot 20 rounds about before it stopped and it was welded in 4 places, its still on the shops ffl cause im waiting for form 3 to get approved so they can still fix it, ill see if it cant be pinned.
>>30496250
oh wow... did you build that with a 2x4 and a sledgehammer?
>he pressed on the FSB/GB with the gas tube on, but not properly aligned
>b-but I wanted a tight fit!
ur gas tube is fucked.
>welded in 4 spots
yea.... the whole thing is fucked. Throw it in the trash.
>>30496028
The adapter has little to no play, while the brake has a few mm of play from left to right
>>30496035
http://www.cncwarrior.com/AK-Saiga-Sidefolder-p/25362.htm
>>30496250
Woah yeah that definitely moved, they did a nice job recreating the dimples but it needs pinned unless they're dimpled like factory. (Welds never hold for applications like that)
>yes its airshit but looks damn cool
>>30496298
Why dont you show me your kit builds?
The FSGB was pressed on until it was near the gas tube to where the gas tube was on but still loose and rattled a bit, after I shot it today it sounded like it was a bit looser, I think the end of the gas tube is pressed in a bit but it was not from me pressing on the FSGB, I can guaranteed Ive built more AK's than you but this is my first krink mind you, now please tell me how I was supposed to secure a FSGB that has no pin holes? (besides drilling new pin holes than welding over as that was not an option.) As such it was welded where the dimples were.
>>30496364
Should I have it pinned on the underside where the "nubs" are?
>>30496377
I aint even got time to read all your babble. All I know is you fucked your gas tube in whatever retardation you did, you can see the obvious bend at the 12 oclock part that is no perpendicular with the barrel. As for the FSBGB, you didnt pin it on dumbshit. I wouldnt be suprised if you go at it with a hand drill and 4mm bit, and completely fuck it up by it deflecting off the barrel and coming out the very bottom of the lug because youre too dumb to start with a endmill or use a drillpress and go reallly fuckin slow.
I bet you youre the fucker who kept posting that krink that had the crushed to shit trunnion rivets in the last akg's arnt you....TheRussian.
>>30496377
>He tried to just weld it to the barrel
>the dumb fuck prolly didnt even get the parkerizing off the barrel, hence why its walked in <20rds
Did you even set the barrelpin right? Imma laugh when the thing blows up because you used a nonserialized bolt with your trunnion and just used the old barrelpin hole.
>>30496407
>I aint even got time to read all your babble.
>Posts something as long as his post.
Wew
>>30496437
You are a resident here who doesnt have a damn clue as to what ur doing, so I know you got time and reason to read all my shit.
Me? Im outta here.
>>30496406
Yes, use a endmill to start, make the pins long enough to blend them in and after paint no one will know they're there.
>>30496407
Bet you're fun at parties
>>30496466
Zasta, would you know where to get an empty mosin rifle shipping crate that isnt beat to fuck?
>>30496470
I asked AIM at one point and they had some for cheap (maybe free can't remember) but shipping was like $100
>hence my building a crate
What sight adjustment tool should I buy?
>>30496407
>you can see the obvious bend at the 12 oclock part that is no perpendicular with the barrel
Nigger what? Are you talking about how the gas tube is pressed in? It was like that when I got the kit, as to me no I'm not TheRussian never knew him, as to my rivets? The rear ones are flat like they are supposed to be flat, and I bet your the guy from the last thread who doesn't actually have have an AK and never posted it when asked.
>>30496433
Barrel never had any parkerizing on it, and has not been painted yet, the barrel is new and had the hole pin drilled when it was headspaced, was I supposed to weld up the trunnion?
>>30496466
I think I can have that done.
Golden Tiger or Mil spec non corrosive Barnaul? Silver Bear was my go to but can't find any right now.
>>30493468
m10's are less than 1k and are pretty good.
>>30496510
Fuck. That's a little expensive for shipping.
I wanted to have a crate as a coffee table for my mancave.
>>30496617
Where are located? I have one, an amd-65 crate in the barn and 2 in the shop I work at.
>>30496642
KS, where are you located?
>>30496653
IN, and yeah shipping costs is a lot with its weight and size
>>30496666
Shoot me an email @ kommandoanon9130 Gmail
>>30494780
>being a poorfag
>being a picky poorfag who thinks he's too good for a WASR
>>30496173
Fuckwhat? SKS in 7,62x54r?
...
I approve of this boner!
>>30496666
Nice quads sir
>>30494064
Are those brass cased 39 and 54R rounds? Or just brass plated/washed steel cases?
>>30496740
>not seeing the bolt handle and knowing some fuckwit at cabelas miss labeled an M44 mosin
>>30496801
My bad. I only just woke up. My brain is zombie-grade right now. I thought that something was amiss.
I stand corrected. Still, SKS in 7,62x54r sounds like fun.
>>30496801
>this
They sure are retards
>>30495398
>that stock
Welcome to the club.
Is 7n6 ever gonna get unbanned?
>>30497128
It's not banned, imports from Russia are. I've heard that some of the 7n6 that's currently available is "Bulgarian".
I wish the AK-107 was "Bulgarian".
>>30497165
I thought 7n6 was banned from importation because its armor piercing as well
>>30497172
Yeah, someone made a "pistol" chambered in 5.45x39 and that became a shitshow. Nobody defended it politically, until the same thing happened with M855 5.56x45.
Basically, AR owners didn't care that their rights were being infringed upon because it didn't affect them at the time. Then the 5.56 ban came up and suddenly everyone went "hay nooo, stop it for real this time, please".
>>30494088
>>30494105
>>30494157
>>30494182
>>30494219
>>30494228
is this an ak9?
Any good reccomendations for a cheap red dot for my wasr?
>>30497415
TRS25
>>30496793
yes, at least lapua makes them out of brass, why not others?
>>30497217
barrel and gas tube are too long
>>30494804
If you have an android phone, use opencamera, it lets you play with exposure and iso settings to kill grain, or get borderline night vision,
>>30494262
Who gives a shit. Acting like an asshole isn't gonna get my business.
>>30497165
If 7n6 was banned because it Russian then we would be getting surplus Bulgarian and Polish 7n6
Anyone that can help me get a 50 round quad stack? I've got money to burn.
>>30497987
Unobtainable. Telling you as a ruski who almost got one from special forces guy.
>>30498235
But I see them on those deact sites.
>>30498235
Skinhead has a smoke/clear quad
>>30498365
Exactly? How does Skinhead have all the good shit?
>>30493288
It works pretty well at reducing flash and recoil, just be prepared for some pretty obnoxious muzzle blast and mine had a little bit of rust on it when it arrived.
Is it true that the ALG AK trigger will cause mushrooming on the carrier's tail just like the G2? I've already polished the hammer, but it still only contacts the tail at the very bottom as opposed to the full contact provided by mil-spec triggers.
TL;DR If I want to avoid mushrooming, should I stop using the ALG trigger?
>>30491819
>bikerfag
>>30494023
What is that?
Grenade launcher?
I can see the magazine and bolt action
>>30494088
is that an extra safety on the grip or a mag release?
>>30494631
Holy shit do you live in the shire
meh, can't decide which looks cooler.....the old setup...
>>30499690
or like this...bought the Booster for the use on a crowded firingrange.
If i use my comp i get some fucked up looks.
>>30499690
Is that triangle pouch comfortable to shoot with? Or is it just for aesthetics?
>>30499359
Suppressed nade launcher
>>30499573
Safety
>>30499583
Such green
anyone hunt with 54r? i want to entertain the idea
>also 16in barrel for better harmonics?
>>30499759
i think its more comfortable. Especially in cold condition.
Why is it so fucking hard to get my hands on a definitive arms DAKM 4150?
>>30499759
+ i have the cleaning kit, a replacement bolt/extractor and my holdovers in it. just in case :)
>>30499790
Thank you anon. I'll be ordering one soon.
>>30499794
they only make a few a month
>>30497620
I know that SAKO also makes them out of brass. But most russian 39 and 54R are brass plated/washed steel cases
Someone was looking for 45rnd true black molots? I can sell a couple in nos condition, 115$ shipped from Russia.
>>30500235
What about 40 round NOS Bakelites?
>>30494064
9.3x64
>>30492146
>"but they make bakelite magazines for airshit too!"
What an idiot. They aren't even actual bakelite.
>>30494064
>10x32T
>TRAUMATIC
>>30493384
I got my SLR-104FR second hand from a guy who also gave me like 600 in accessories and 400 rounds of ammo for 1k total. Look around, there's bound to be a deal somewhere
>>30500491
I have just three for 100 shipped. If you get all at once I'll make a discount and add a free rpk pouch.
>>30500702
i actually saw some russian airsofters that actually mutilated bakelites to fit their guns, they cut off the feeding lips and swap the internals
>>30500852
Confirming, a lot of Russian airshitters do that. Why not when they can get a complete mag for less than 10$.
>>30500852
>i actually saw some russian airsofters
I bet you did you fucking faggot
>>30500810
This-watch people dump 104s cuz 15ยข ammo gon
>>30500884
I still get ammo at 18-20cpr, are people unable to internet?
