Want to go shopping for me?
I have $650 to spend on a 9mm handgun
Glock 17
Below your budget and it's a fine weapon. In before exploding meme
>>30379026
this for cc or just the range?
>>30379026
You need a revolver, anon.
Get a prelock smith.
What's everyone think of the H&K VP9? I have the opportunity to get one for a good price with some extras. I've been in the market for a striker fire pistol in 9mm but was leaning towards the M&P9. Anyone who has had experience with both?
>>30378944
The determining factor should be the paddle mag release. One big con is the 15rd only mags.
Waiting on some retard to say something about water
>>30378944
very basic gun
i liked it a lot
Paddle mag release, also considering it's about 0.5 inch longer than the G19 it should hold more than 15 rounds.
Whatever, solid gun though I'm sure.
post yer guns fgts
Do you still suck dicks?
>>30324534
not as many as you bb
>>30324534
>Those Enfields
Co-Worker is being a dick and I want to prove to him how easy it is to an assault weapon. How much would a fully automatic ak-15 run me back?
3 gorgillion.
>>30378938
It's hard.
>>30378938
ummm HUH??
Long story short I need to carry at work and I can't ask for permission. I'm not going to be with out a gun but I'm not going to push the issue with my employers. I need a gun for deep concealment, something I can carry while wearing an Oxford tucked in to khakis.
>>30378871
Rectal carry a p64
Posted before I finished. What would /k/ recommend and is anyone else in a don't ask don't tell situation.
Get a better job.
>""""""""""""mass shooting"""""""""" in Germany
>No deaths other than the """""""shooter"""""""
Stay disappointed /k/.
>>30378858
>replica gun or air gun
>only four "shots" fired
>"victims" said the gunman was "noticable mentally unstable"
and the best part
>25+ injured due to gas from the Germans.
>>30378858
Calling it as an Aloha Snackbar incident.
>>30378858
>so far the only threads mentioning it have been one claiming it might be a snackbar and someone ranting about how great gun control is
Great thread op, please stay on your containment board
What does /k/ think of me shotgun, also post your exotic or custom stuff
It`s unaxeceptable
It just doesn't make the cut
>>30378795
Does it shoot axes? I bet the stock is hollow for holding booze too. Dorf artificer pls share secrets.
post spooky innawoods shit
my story
>be me
>16 years old
>fucking around in the woods behind my neighborhood
>got my ruger 10/22 with me cause you fucks made me paranoid
>its a nice little bit of forest in the middle it ill stretch for miles in any direction
>be near the creek in the forest just chillin
now it should be known that occasionaly coyotes and bobcats roam the...
Comment too long. Click here to view the full text.
bump for interest have not read spooky greentexts in a while
>>30378695
ops story is lame
>>30378810
>>30378695
These threads have been getting pruned. I remember when /k/ was full of them...
GSG9 in germany right now?
Do you think they wasted the shooter?
>>30378666
shooter ist tot.
>>30378666
>be gsg
>government say "kill bad guys that kill jewish sportsmen"
>but be german, so must be very efficient and precise
>get HK to custom design guns for us
>waste all the deutchsmarks on HK
>no money for ammo, but its ok since german engineering precise and no need for ammo
>almost 40...
Comment too long. Click here to view the full text.
>>30378666
Why do mainland euro police love the ballistic face mask so much?
link http://www.msn.com/en-us/news/world/armed-man-opens-fire-in-german-cinema-complex-up-to-50-hurt-media/ar-AAhxdSc?ocid=spartanntp
Ban assault Muslims
>>30378660
Score yet.?
motive?
snackbar?
nationalist?
socialist?
national socialist?
I've bought myself Pietta's Remington New Model Army yesterday.
While I was fingering it at home today, I've noticed that, when in half cock, plunger only aligns with lower chamber just before hand switches to next groove (the click sound)[second photo].
While I have no experiance with cap&ball revolvers, I have the feeling that this might get annoying once on range, since if I were to pass that "sweet spot", I would have to remove cylinder and try to align it correctly again.
Fortunetly I did found workaround, by pulling cylinder...
Comment too long. Click here to view the full text.
>>30378450
selfbumping
>>30378450
Normal.
>>30379302
Do you own one?
What's your gun of choice for EDC? Pic related.
>>30378415
Where is the holster you sexy mink?
Glock 19 fits perfectly for me. Nice and comfortable. Only issue is I have somewhat bigger hands so I needed to mod the grip, but other than that Glock 19 gen 4 for me
>>30378430
I my butt clenches so hard I don't need one.
Alright /k/ this should go fast enough.
Military Grade means what is military issue from the Year 2000 and up. If I got that wrong, that is a free space.
If any questions, ask me.
Please Timestamp.
>>30378408
A lot of those are redundant. Step up your game, Boingo.
>>30378408
Awful bingo card.
I'll find a better one. Be right back.
New ukrain bullpup lads
Does it use standard AK mags? If so, that grip is gonna be a bitch
Holy fuck what yhe hell are they thinking. This is just an akm with a bullpup kit. Its not a new rifle, its literally a fucking akm with a bullpop kit on it. Bullpop because its bullshit. Id anybody is retarded enough to think this is in any way a good idea or hell new they need to leave. Also, it looks cool as fuck and i want one for my slavashitter stuff.
Since were all gun nuts that live and breathe firearms, does anyone on here actually work as a gunsmith or in a manufacting plant?
I figure it would be a way to get paid working on a passion, and maybe get the inside scoop of whats to come
>>30378088
Being a gunsmith for a large manufacturer is generally pretty shit. You most likely would just be in assembly.
Private gunsmithing is decent money if you specialize. You're better off just learning CNC and becoming a machinist if thats what you are interested in.
I just build my own shit to enhance my personal collection.
All my money comes from computer programming n shit.
>>30378088
I work for Kel-Tec. CNC operator. Great company, amazing benefits, and serious discounts on our guns and with other manufacturers and suppliers that we have deals with. If you're really looking to get into it I would say take the steps to become a machinist and supplement that with general gunsmithing knowledge. That would get you started on being able to do just about anything you want with firearms. The stuff you could do with a small mill or lathe in your garage could be a good way to make side money and...
Comment too long. Click here to view the full text.