new gutsu
give me feedback pls! I added two fans up top, and removed optical drive. [email protected], 390@1165/1650
Added two fans where?
>>52032378
above the 212, that pic is old and I'm out of town right now
>>52032209
Gutsu!
Your build looks very nice indeed. Not very much feedback I can give. Hide the braided cable sticking out of the right of the mobo tray maybe?
Nice 390, shame Hawaii overclocks better than Fjij, my Fury can't do anything above 1150 and be completely stable.
Shouldn't help much, more fans doesn't equal cooler CPU. Pretty sure you already had efficient airflow.
>>52032453
Like a retard I forgot to post my guts.
>>52032476
it actually helped a ton, about 6°.. there wasn't enough exhaust so what was building up in the CPU area.
>>52032649
heat**
>>52032453
also, thanks!! I think in my revision I fixed that cable
Suggestions for additional ricing?
>>52032209
would you share idle/full load temp
My [email protected]
idle : 28 Full Load : 52
>>52032957
>>52033007
corsair/10
>>52032855
PSU text color to blue
paint upper part of heatsink blue
>>52032641
You could use a smaller case.
>>52032481
So can you. Add fans to the top.
also
>optical media
>>52032957
idle: 40° load: 80°
voltage is at 1.345, you?
I'm gonna reapply my TIM, I think there may be a bubble
>>52033883
1.335 on Manuel Setting
Wish Reapplying Help Anon! , seem a bit hot on full load ?
>>52033755
Dude what are you doing
>>52033007
Do people who use Corsair fans/AIOs actually look at the specs? Those fans are pretty bad for the noise and the radiators are aluminium with high fpi.
>tfw Sapphire doesn't have a 390(X) Vapor-X
I wish I could CF two of the 8GB versions, but I can't even find anywhere they're in stock for any price.
>>52033755
Please draw airflow.
getting new psu and gpu soon.
>>52034146
Fans don't spin harder when running prime95, making it completely silent.
This is the maximum heat preset prime95
Give me a sec for airflow.
>>52034167
yo, sell me yo gpu, nukkah
>>52034146
There are 3 case fans in there called Noctua NF-S12B.
>>52033755
Is that a Raijintek Metis? Holy shit. Never seen such levels of comfy inside a case.
>>52032209
u should run your pci-e power cables up instead of down to help counteract that sag that's going on there
>>52034320
Raidmax atomic, which is practically the same case. Just different brand. That comfy came at a cost.
>>52032378
up his ass
>>52034100
The fan coming with the H105 were clearly garbage and could be better.
Those one were choose for the esthetic so no doubt there better on the market , still they are better then the original one , on a noise level. Moar or less the same for the performance!
Im not much into the air cooling look with those big bulky air cooler and since i dont do heavy Oc , the performance werent the only aspect look into when purchased.
The H105 push/pull at 20% keep my Oced 2500k cool enought for me.
Love the vapor-x! Wanted the 290 but was not available on Newegg.ca sadly!
It's not a beast, but it gets the work done
Why do you guys use high static pressure fans for your case?
Nice 250d familia. How's that Air Penetrator fan? I'm curious about them. Kind of thinking about replacing all of my fans with them. Also, what 80mm fan do you have on the rear exhaust?
>>52035537
I'm just fucking up everything I do aren't I
Meant for >>52034188
>>52032209
Thread title is perfect. This is what it should be titled as on every single thread.
As for your build, it looks great! I'd flip the CPU cooler fans over though to hide the cables a bit. It detracts from the look.Also, running your usb, audio, and front i/o headers under the mommyboard tray would look cleaner than going through the grommets. Assuming you have enough cable length, that is.
Also, it's time to dust your case and get those hairs out of it. That's icky.
>>52035685
shit my s/n
please dont ddos my PSU
>>52035999
late night potato gatsu take 2
>>52036342
>negative airpressure
Hm. Clever.
>>52036804
>not knowing how fans work
>r8 4 a r8?
>>52032209
looks alright, but why use cable extensions instead of having fully braided cables?
>>52032481
looks nice, how well does that xfire run?
>>52032855
glow in the dark paint? an led fan on psu maybe?
>>52033007
I like it, nice case and good colours on everything except your cables
>>52034279
do none of those fans get turbulence? it's crazy how you managed to get that all in there. How come you didn't do your air flow in reverse, pushing air out the psu?
>>52034304
nice, looks effective
>>52035094
i like
>>52035537
love your build omg
>>52035999
nice but take a better pic
>>52036342
why is your fan set up conflicting itself? is that a rad on the top? wtf?
>>52037595
>do none of those fans get turbulence? it's crazy how you managed to get that all in there. How come you didn't do your air flow in reverse, pushing air out the psu?
Because the GPU is blowing down. The fans are literally spinning at around 400 rpm. All of them. This keeps things cool enough that it never needs to ramp up the speed.
I have to admit building it was more like building a case around the cooler then the other way around. Thank god that case can be completely disassembled.
>>52037595
op here, your build is hella kawaii, looks super clean. one of my favorite all black builds. I used extensions because they were cheaper and easier desu. I'm still contemplating 3d printing a custom designed shroud for the PSU and cables with some pattern on it.
>>52037595
>looks nice, how well does that xfire run?
Thanks, but it's not an xfire setup, it's a GPU passthrough setup. Runs very well.
>>52032209
How's that PSU? Was tempted to buy it myself
>>52034279
I think it's better to remove the fan between the PSU and the heatsink.
Or flip the PSU around, flip D15 fans around so that everything pipes into the PSU.
>>52039953
Nigga i ain't touching that shit when it works more then fine.
to remove a fan I have to take it all apart.
There is around 5mm space between PSU and the fan so it's not like it's completely useless.
And flipping it all around is just all around bad. That would make it 3 intakes and the only exit the PSU which doesn't make a proper exit(It's small and cramped as fuck, SFX PSU). My way I have 2 intakes and 1 proper exit. The CPU will suck up most fresh(after GPU) air and leave a little for the PSU.
>>52039701
it's the best 650w there is!
guess the specs
Upgraded from single 280 to dual 390. Idle temps are surprisingly lower than I thought they would be and load is only around 60-65. Crossfire was a pain to enable due to ULPS and broke Speedfan's control of GPU1.
>>52037595
>love your build omg
Thank you anon, I appreciate that! Absolutely love yours as well. Those BeQuiet! CPU coolers are so nice to look at. I wish I could fit one in my little case lol.
Also, is that the 450d? I'm trying to sway my younger cousin away from those colored plastic NZXT cases for his first build. I feel like he'd appreciate the clean simplicity of your guts.
It just werks
Just assembled my hardware in this new case. Corsair Air 540.
Gfx card temps went down by about 8c under load.
>>52041448
You gotta bit of tilt on your gpu m8.
>>52041535
980ti lightnings are heavy as fuck so there's not much you can do about it. They're in there pretty safe though.
>>52041552
What's the difference between a refrence 980ti and a lighting
>>52041585
Mainly the cooler. The lightning seems to have 3 fans and open exhaust. The reference card has 1 fan with closed exhaust.
>>52041606
Explains the temps I get lol
>>52041606
Also better power delivery and stuff.
>>52041585
Better capacitors and power delivery, better cooling, high factory overclock, and binned GPUs that should overclock really well. Also includes an LN2 mode for nitrogen cooling that lets you add a ton of voltage, but not many people have a use for that. Oh and customizeable led colors but that's sort of a stupid feature.
>Who /nocase/ here?
>>52042168
>Who /bought a server motherboard and paired cpus for $20 but don't have anything to install them into/ here?
>>52042207
>Who /faggot/ here?
>>52042168
Cardboard boxes are cases.
>>52042228
you
>>52042248
Yep
Merry Gutsumas
I don't recommend the Cougar QBX case if anyone was thinking about them.
For 50 CAD, it was the cheapest case available and looked pretty good, but it's not good for high end builds.
I also goofed and bought an SFX PSU to get around the limitations of the PSU orientation only to accidentally buy the SFX-L PSU which is just as long as normal PSU's rendering the whole thing pointless. There's also no where to route cables.
Needless to say, buying a new case soon.
Quick question, I inherited a CRT TV and I want to use it as a monitor for old video games emulated on my PC. It doesn't have component input so I'll have to wire it by S-Video.
If I buy an ancient low profile GPU with S-Video output, will I be able to use it as a secondary monitor? Keep in mind it will be installed in the secondary PCI-E slot, along my 980Ti.
Looks like shit.
>>52042449
true, your gpu is also on fire for being idle.
>>52042413
Should work fine
>>52042479
Dont think those where idle temps, I think I hade some game running in the background, but I still have high idle temps, about 50 or so I think, Dunno why tho.
>>52042536
nwm it started to climp back up too 57 again after exiting games, strange.
>>52042479
>>52042594
MSI cards shut their fans off when idle for maximum silence. Side effect is they have pretty high idle temps compared to other manufacturers. I think gigabyte and asus have started doing this too now though.
>>52042647
I knew they started on 60 with the standard fan curve that I still use, but it seems too hit even that, turing on the fans for a few sec then going down, or atleast thats what I saw happen just a few min ago.
>>52042449
Doesn't look bad.
>>52042449
Why do you have such expensive hardware in such a shitty case?
>>52043355
Its a old Coolermaster haf case I think, gets decent airflow, wouldnt call it shitty.
>>52042449
Why does it say 2g 980 ti?
just noticed that.
