what can i do with a 2 liter bottle?
a weapon could be cool but i wont use it
and i dont do that garden shit
>>990207
pissbottle, as is tradition
>>990209
but of course the traditional piss bottle
but as it turns out im not a lazy cunt and i cant walk to the toilet
>>990211
>uses 4chan
>not a lazy cunt
>>990215
i think this might be going a little of topic
im not saying that Jews isn't the worst religion and steal money from poor crippled children
im just trying to get some use out of a bottle
semen collector
Put holes in the botttle, duct tape your hose to the top of the bottle, enjoy your cold outdoor shower.
>>990220
that idea was already taken by a brony
Use that fancy cutter I'm to fucking lazy to Google and link to make thin strips out of it. Then hang yourself With said strips. Everyone wins.
>>990226
now this is an idea i can get behind!
>>990225
>>990207
Cut the top off, now you have a funnel, cut the bottom off, now you have something to put shit in.
You could make a compressed air tank. Those bottles can hold 100 psi.
Oh and also kill yourself for making this shit ass thread.
>>990236
thats cool and all but i have pockets and drawers
through i might do this
Use the body of the bottle to make wire, use the tops to make waterproof containers, use the bottom as small plates for your buiscuits.
>>990209
>Trucker Bomb
>>990225
no, the pony fag just stole the idea from jizus.
pony fags dont have any original ideas.
I have over 250 1,5L empty water bottles on hand.
I was planning to make a kayak, or at least some kind of floating platform out of them.
Any ideas on how to do so?
>>990624
... Displace enough water to float while still being able to safely occupy your vessel.
Partially fill with muratic acid. Roll up a wad of aluminum foil in to a stick shape. Insert in to bottle. Cap. Shake. Throw it towards your friends, or just hold on to it for a minute. Profit.
>>990624
Take a flat piece of plywood and set all the bottles on top of it upright as closely spaced as possible and build a wooden form surrounding the bottles to hold them in place, then attach another piece of plywood on top so you have essentially made a wooden box with bottles inside. Water will get into the container, but not the bottles.
The displacement from the bottles (ignoring the small amount the wooden frame will displace) will be enough to support well over 800 lbs.
>>990470
>>990758
So wait, whats the math here?
From what I read, I understood that if I had empty 2L bottle fully submerged, it would displace 2L of water.
Not calculating in the compression and weight of the bottle, it should support anything lighter than 2kg (2L of water).
Am I understanding that right?
OP check out this guy he made a floating island with plants, trees, dirt, and a house with plastic bottles as the base.
Sorry here is the artificial island guy video https://www.youtube.com/watch?v=GnLhWpy_nqI
>>990914
1.5L = 1.5 kg of water displaced
1.5kg*250 bottles = 375 kg
375 kg = approximately 825 lbs
Altogether, it will support the same amount of weight as the weight of water displaced. And the wood is also going to be lighter than water, so altogether it would probably support 850 lbs or so.
>>990914
>2L bottle
>2Ls of liquid
Does this count?
>>991092
https://www.youtube.com/watch?v=IApUK_eu3Ek
>>991019
Alright.
Assuming weight of 100kg, just to be safe, I dont want to barely float.
So, 100kg->100L of water displaced->about 67*1.5L bottles.
I would love to make it into a kayak, I liked kayaking and there is a small river and breddy big lake nearby.
I tried to come up with few ways to position/tie bottles together into vaguely kayak shape.
First thought was to tie them by the necks like a ladder and then make it rigid by connecting to wooden pole running the length of the kayak, lying on the bottlenecks.
Roughing it up it would be about 300x60cm platform.
Thats kinda long.
Second thought would be somehow tying bottles parallel to each other in sections of seven or eight bottles and then tying those sections to one or two poles running the length to kayak.
Sadly, after calculations it wouldnt be any shorter.
The length bothered me because it would be awkward to transport throu bike.
It would seem however that a bit over 3m of length and 60cm width are standard kayak size, so that already sounds promising.
I also seriously entertain a thought of putting whole thing/encasing it in the some kind of big trashbag, maybe the kind they use for construction sites, the thick foil ones.
That would prevent water from getting between bottles and wetting my ass, but more importantly it would kinda enhance buoyancy, I think? Combine it with how bottles would kinda curve around my body as I sit in it, it should behave breddy kayaky.
If I find bags big enough to fit whole thing in, that is.
Then strap something like thick tarp to the bottom from the outside to make bag punctures more difficult to happen and done!
As you may see, I have kinda big hopes for this project.
Please point out any misconceptions I might have or mistakes.
I really want this to work out.
>>991093
that looks pretty badass
I'm totally going to do this in my cabin.
>>991262
Silly people, what are they gunna do when winter comes and freezes the water?
>>991282
They'll use mineral oil.
>>991262
dont think it gets ccold enough for water to freeze in that part of the world
>>990207
Gravity bong
>>990207
Unclog sink.
>>991290
Put antifreeze in it, or don't fill it fully, leaving room to expand.
>>991282
If you ignore the retarded white hippies trying to be green, this is only done in poor shitty countries. The poor shitty countries tend to be near the equator where freezing is never an issue.
Also you generally put some bleach in these to prevent algae and shit from sprouting and to increase the light transmission which also lowers the freezing point.
google water rockets
>>990207
Three foot tall gravity bong.
make some goddamn yellowjacket/wasp traps. just cut and paste as indicated and fill with sugar water and watch the fuckers die.
35 bottles tied on the wall.
Kayak guy >>991115 here, started tying some bottles together some time ago, and Im halfway done!
Tied at three points- neck, middle and bottom- with white plastic string I have whole bigass spool lying around.
Whole shit feels quite solid together, it might just work.
I tied all 35 bottles first by the neck and then I added middle and bottom strings.
As a result , two or three last bottles are a tiny bit misaligned.
For the second part Ill try tying it in all three spots simultaneously, bottle by bottle.
Pic related, taken with my shitty potatoweb camera.
>>991844
Pretty cool.
My input. Won't win you any awards for design but sometimes space is at a premium and storage is expensive.
>>990207
G-bongs
>>991770
Also works as a baitfish trap if you put it in a creek
>>990207
This
Join two top to top and make those tornado simulators from kindergarten
>>991092
I hope OP kills himself with this shit
>>991770
I use that same design for making coffee. Put a reusable filter in the top.
>>993743
And pour hot water throu?
Doesn't that deform the bottle something fierce?
>>990948
I dig it
>>990207
Become the next jeezuz
>>991262
>lights that only work during the day.
>>995989
>what is skylight
>>995989
You're right, they are better off living in the dark during the day and the night.
>>990207
I'd just return them to the store for a quarter each.
>>990669
>muriatic acid
Might require a special trip to the hardware store, of he asks his parents for a ride he'll have to explain why and they'll say no, unless he can come up with a good enough lie.
However, the cleaning product "the Works" will work just as well for this application, and is sold by most general merchandise stores that sell cleaning products. Even some gas stations have it.
>>990207
raft for bath tub. Like a pontoon boat, but with coke bottles.
Pics or it didnt happen.
>>990225
upboat if you came here via showderp
>>992289
Going to try this.
>>990207
Cut off top
Fill with tight fitting styrofoam.
Cut slit in middle of sturofoam.
Insert lubricated condom in styrofoam backwards.
Insert micropenis.
There you have it home made fleshlight
I've done really quick and dirty homebrewing with them. Wouldn't recommend it if you can find something better, but they'll do after a couple of tries to figure it out. For extra cheapness, use a balloon with a pinhole in it for an escape valve.
https://www.youtube.com/watch?v=jcTdRGaFldw
