Recently made this flower press for a girl I've been seeing. she absolutely loved it and I'm really keen to start a few a few more projects we can do together. I own a machineshop so I'm not really limited in what I can make but I love using hand tools. Will make a drawing up of the flower press if anyone is keen on making one themselves.
>Things we've made for Gf's or want to make
Dildos
>>1018601
>1m, 55s
not bad, but nowhere near record form..
>>1018600
Paper maker. Thats more woodworking but good ones are hard to find.
Rock tumbler. Ladies love shiny stones man.
>>1018605
I actually really like the idea of a nice rock tumbler
I made all the square and octagon nuts by hand from scrap 5160 steel slugs I had lying around, heated them until they reached about 620 degrees and quenched them in very dirty engine oil. For the underside I tightened the threaded bar up with the nuts protruding out, marked them and used a chisel to make a slot so they sit flat.
>>1018600
>Will make a drawing up of the flower press if anyone is keen on making one themselves.
Proceed; bump for interest.
>>1018600
Make finger box with a lock inside out of pallets and shipping containers that also holds a collapsible dildo but all of it has to be within a 0.002"
>>1018618
drawing it up now from memory
(1)
will finish the rest off tonight
>>1018621
>>1018653
BSW? Are you from the 1800's?
>>1018672
OP might fabricate a lot of stage lighting fixtures...
>>1018605
whoa
how do I make either of those?
>>1018600
Show drawing gotta sell it to hipsters on a flea market they dig that shit
>>1018985
Rock tumbler: paint can attached to a motor, filled with rocks?
>>1018653
I await the remainder of your design.
>>1018624
This
>>1018605
got pictures of the Paper maker and any schematics?
>>1018900
its ship isn't it.
>>1018653
You are one hardcore motherfucker. Where do you get taps for that thread?
Also what did you draw that up in?
How about a mechanical challenge and make an antikythera computer?
https://en.m.wikipedia.org/wiki/Antikythera_mechanism
>>1018600
Would you make one for a man...? I.E. would you make one for me?
>>1019881
Not OP, but the hours in fabricating such a press aren't cheap. People often don't understand that stock parts you buy from a hardware store would often cost mad cash if they were machined as one-offs.
Brit taps are commonly available on the internet. Google the size bu always check Ebay too. (Britbaikufag here.)
