Guys I have a phone with a glossy back. Pic related- similar Anyway, it's scratched to hell and I want to add a soft touch or matte finish to it. It's a fingerprint magnet as well. How do I go about this?
Half my house, like right down middle is suddenly having power problems. The right side appliances and lights are barely on, and the electronics are turning on and then off. Other side of house is fine along with the overhead lights.
Any idea? I have no experience with electrical work. Ignore the picture.
Are there any legal issues with getting a USB/PCI-e LTE adapter for my home router (pfSense box) and building a huge fucking antenna to turn it into a fixed-WISP style client device? I'm thinking of doing this since I have unlimited cell data and Comcast sucks goat vomit through a bendy straw. Picture somewhat related.
"Unlimited cell data" and unlimited cell data are often two very different things. Your connection's gonna get throttled to almost nothing pretty quick unless you have some arcane grandfathered-in plan.
>>935745 I'm mostly nocturnal so even if I was tethering at line rate for six hours a day it wouldn't cause significant network congestion. I've telecommuted a ten hour shift via tethering before with no throttling. My plan does include unlimited data with no throttling.
How do I fix my glasses in a way that doesn't cost too much money and doesn't completely look like shit? When I was wiping my glasses off with a towel on of the pads that sits between my nose and the frame broke off, and now I constantly have a piece of my glasses poking into my nose. I can alleviate it by placing some paper between that part of my nose and the tiny sharp bit coming out, but I look like an asshole, so I normally just grin and bear it. It seems nigh impossible to remove, and I've spent a good several minutes with a sharp knife trying to remove... Comment too long. Click here to view the full text.
>>943426 >broke off the nose pads and jb weld them on. You mean I should break them BOTH off, and then use this compound to bind them back to the glasses so that they're both attached and they both look the same?
>>939732 It's a fucking shitload of current. Think about a 120V solenoid. As beefed up and torque-y as they get, you could still push it in with your hand. You want something that would mechanically latch into place.
Are dealing with toxins something you can do diy? I'm pretty sure I have something in my room because sometimes I smell weird shit and it's a really old as fuck house with little maintenance. I wake up with a stomach ache every day I have random pains and exhaustion. I have crazy as fuck dry mouth that sometimes makes my gums bleed I also notice symptoms show up more when I'm in the room
How do I know what the problem is? Should I just buy tests for everything
>>943463 >frequent abdominal pain >unexplained pain >exhaustion >lack of saliva >bleeding gums >measurable effects based on environment
OP, it might be a good idea to talk to a doctor about this first. Make sure that whatever is going on, isn't causing serious damage to you, or the symptoms you are experiencing aren't... Comment too long. Click here to view the full text.
hi! I wanna make surprise for my boyfriend so I need your help. I want you to write on the card "Masha+Maksim=" and take a picture of you with this card. Please send me your photos in email "email@example.com". I would be so grateful! ^.^
Any of you tube guys ever heard of this? The wiki article for evacuation tip (the little wiggly bit on the ends of tubes) mentions something called a "glasshacker", which are apparently people who ...hack vacuum tubes? Is this a real thing? Because I've never heard of it before, and it doesn't seem to be mentioned anywhere else on the internet.
>>940911 It's sometimes done in nixies tubes. You swap out the gas inside it and they change the colour of the glow, since most nixies ionize the gas around the filament to get the glow. So you swap it out for lets say argon and you get a blueish white glow. I've never seen anyone do it but it's possible.
>>940852 So buy a battery box? Should it be ok in the bin I have it in now if I strap it down in my trunk? If so, should I put wood under it? I was always told to do that if I'm putting a battery on the floor. Maybe it's just a myth
hi there /diy/, i have an old zippo lighter that i never use and want to do something cool with it, please tell me what i should do, i have seen people make them simple storage compartments, vapes, and also guns. you decide its fate /diy
All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.
This is a 4chan archive - all of the content originated from them. If you need IP information for a Poster - you need to contact them. This website shows only archived content.
If a post contains personal/copyrighted/illegal content you can contact me at firstname.lastname@example.org with that post and thread number and it will be removed as soon as possible.