>>949829 Literally just google Racket Ball Room Dimensions https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=0ahUKEwjstsDioIjLAhUQ8GMKHTaCDSUQFggxMAY&url=http%3A%2F%2Fwww.teamusa.org%2F~%2Fmedia%2Fusa_racquetball%2Fdocuments%2Frules%2Fstandardspecsforracquetballcourtconstructionrev09.pdf&usg=AFQjCNHSnuY0BLity1rfsTsl9mQ-EUbZCw&sig2=TVbss3_OtGLNzIS2wnCUuA
I have a 16' camper that I'm taking down to just the base. I'm going to (hopefully) make a tiny house. I'm hoping to be self sufficient (for the most part). Meaning I want a composting toilet, water reserve, solar panels, and propane. Pretty inexperienced, and I'm curious if anyone has some suggestions or tips. Tried /adv/, but want to helpful. Google is too general. Suggested options? Cheaper alternatives? Pls halp.
my idea is making a half-dome type thing that you place on an iphone light using glass. SO anyone who blows glass might have a good perspective. I'm thinking making cool half marbles that you place on your iphone to project a beautiful soft light
I have a 2011 MacBook Pro that is holding up very well, however it is soon time to upgrade.
I'm looking to build my own laptop from scratch, Ideally i'd like to order the parts and assemble at my house. How hard is this to do? Where can I get a "chassis" for a laptop? Am I better off buying an alienware or similar brand? Any good brands out there that are more under the radar?
Any other suggestions are welcomed. My budget is approx. 1000-1500 and I want top specs.... Comment too long. Click here to view the full text.
>>948780 since it's a rental and I'm assuming the landlord has been asked to fix the problem but wont, tape plastic over that shit. Clear if you wana see out of it, but I'd say fuck it and wrap the shit outa all that and forget looking out the window. The put a thick comforter over it.
>>948153 this one is a material handler. it picks up a part out of a cooling rack, sets it in a pierce unit, picks another, picks pierced part out, places New part, places finished part onto a poke-yoke fixture that also date stamps, then repeats. we make automotive suspension subframes and engine cradles.
finally got around fiinishing my book turned key hanger. I used gelatine for glueing together the pages. I used twice the concentration as suggested for food applications and that shit’s now hard as a rock. Pre-drilling the holes for the hooks worked perfectly (during the drilling I clamped the pages together for good measure, though). I used Tesa ® Power ® Strips™ to attach it to the wall.
>basement wall starts leaking around a half-assed caulk job that was supposed to seal an old drain/water supply/gas line, not sure what it was >no big deal, remove wad of caulking around pipe, seal with hydraulic cement >water says fuck you, begins to travel to rest of wall, new patches force water to next brick, etc >flush toilet and water sprays out of a hole I had yet to patch >fuck, broken drain line behind house has to... Comment too long. Click here to view the full text.
Hello, i wanna design a preamp pedal for my SM58 microphone. Whats more useful or "right", putting the XLR in the IN or the OUT? I thought of putting a TRS mono in and a XLR out so it goes straight to the board.
I was exploring an abandoned building earlier today, now there was a pump which seemed to inject potassiumhydroxide into the ventilation system. There were also big jerrycans filled with potassiumhydroxide. I couldnt seem to find anything online about this. Does anhbody know why they would do this?
Hey /diy/, this is my first thread here. I was wondering if I could get some advice for making handles for polearms, such as halberds, pikes, javilens, and so on. I was thinking about using some 1.5 X 48 inch dowel rods from Lowes or Home Depot. Any other suggestions would be great
All trademarks and copyrights on this page are owned by their respective parties. Images uploaded are the responsibility of the Poster. Comments are owned by the Poster.
This is a 4chan archive - all of the content originated from them. If you need IP information for a Poster - you need to contact them. This website shows only archived content.
If a post contains personal/copyrighted/illegal content you can contact me at email@example.com with that post and thread number and it will be removed as soon as possible.